Performance of alumina-based ceramic inserts in high-speed machining of nimonic 80A

References

• Smart, E. F.; Trent, E. M. Temperature Distribution in Tools Used for Cutting Iron, Titanium and Nickel. Int. J. Production Res. 1975, 13(3), 265–290.
   Google Scholar
• Liao, Y. S.; Shiue, R. H. Carbide Tool Wear Mechanism in Turning of Inconel 718 Superalloy. Wear Int. J. Sci. Tech. Frict. Lubric. Wear 1996, 193, 16–24.
   Web of Science ®Google Scholar
• Rahman, M.; Seah, W. K. H.; Teo, T. T. The Machinability of Inconel 718. J. Mater. Process. Technol. 1997, 63(1–3), 199–204.
   Web of Science ®Google Scholar
• Lambert, B. K.; Dudek, R. A.; Williams, S. L. Single Point Tool, Orthogonal Cutting Force Equations as a Function of Cutting Speed, Feed, Depth of Cut and Side-Rake Angle. Int. J. Production Res. 1967, 6(3), 241–247.
   Google Scholar
• Das, S. R.; Panda, A.; Dhupal, D. Experimental Investigation of Surface Roughness, Flank Wear, Chip Morphology and Cost Estimation During Machining of Hardened AISI 4340 Steel with Coated Carbide Insert. Mech. Adv. Mater. Mod. Processes 2017, 3(1), 9–13.
   Google Scholar
• Pawade, R. S.; Joshi, S. S.; Brahmankar, P. K. Effect of Machining Parameters and Cutting Edge Geometry on Surface Integrity of High-Speed Turned Inconel 718. Int. J. Mach. Tool Manu. 2008, 48(1), 15–28.
   Web of Science ®Google Scholar
• Ozel, T.; Ulutan, D. Effects of Machining Parameters and Tool Geometry on Serrated Chip Formation, Specific Forces and Energies in Orthogonal Cutting of Nickel-Based Super Alloy Inconel 100. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2014, 228(7), 673–686.
   Web of Science ®Google Scholar
• Altin, A.; Nalbant, M.; Taskesen, A. Materials & Design the Effects of Cutting Speed on Tool Wear and Tool Life When Machining Inconel 718 with Ceramic Tools. Mater. Des. 2007, 28, 2518–2522.
   Web of Science ®Google Scholar
• Chen, L.; El-Wardany, T. I.; Nasr, M.; Elbestawi, M. A. Effects of Edge Preparation and Feed When Hard Turning a Hot Work Die Steel with Polycrystalline Cubic Boron Nitride Tools. CIRP Ann. Manuf. Technol. 2006, 55(1), 89–92.
   Web of Science ®Google Scholar
• Zou, B.; Chen, M.; Li, S. Study on Finish-Turning of NiCr20TiAl Nickel-Based Alloy Using Al2O3/TiN-Coated Carbide Tools. Int. J. Adv. Manu. Technol. 2011, 53, 81–92.
   Web of Science ®Google Scholar
• Ezilarasan, C.; Senthilkumar, V. S.; Velayudham, A. Effect of Machining Parameters on Surface Integrity in Machining NIMONIC C-263 Super Alloysing Whisker-Reinforced Ceramic Insert. J. Mater. Eng. Perform. 2013, 22(6), 1619–1628.
   Web of Science ®Google Scholar
• Ezugwu, E. O.; Okeke., C. I. Behavior of Coated Carbide Tools in High Speed Machining of a Nickel Base Alloy. Tribology Trans. 2002, 45(1), 122–126.
   Web of Science ®Google Scholar
• Bhatt, A.; Attia, H.; Vargas, R.; Thomson, V. Wear Mechanisms of WC Coated and Uncoated Tools in Finish Turning of Inconel 718. Tribology Int. 2011, 43, 1113–1121.
   Web of Science ®Google Scholar
• Kutschej, K.; Mayrhofer, P. H.; Kathrein, M.; Polcik, P.; Mitterer, C. A New Low- Friction Concept for Ti1–xAlxN Based Coatings in High-Temperature Applications. Surf. Coat. Technol. 2004, 188–189, 358–363.
   Web of Science ®Google Scholar
• Thakur, A.; Gangopadhyay, S. Dry Machining of Nickel-Basedsuper Alloy as a Sustainable Alternative Using TiN/TiAlN Coated Tool. J. Clean. Prod. 2016, 129, 256–268.
   Web of Science ®Google Scholar
• Thakur, A.; Gangopadhyay, S. State-of-the-Art in Surface Integrity in Machining of Nickel-Based Super Alloys. Int. J. Mach. Tools and Manu. 2016, 100, 25–54.
   Web of Science ®Google Scholar
• Hao, Z.; gao, D.; Fan, Y.; Han R. New Observations on Tool Wear Mechanism in Dry Machining Inconel 718. Int. J. Mach. Tool Manuf. 2011, 51(12), 973–979.
   Web of Science ®Google Scholar
• Pervaiz, S.; Rashid, A.; Deiab, I.; Nicolescu, M. Influence of Tool Materials on Machinability of Titanium-and Nickel-Based Alloys. Rev. Mate. Manuf. Processes 2014, 29(3), 219–252.
   Web of Science ®Google Scholar
• Amini, S.; Fatemi, M. H.; Atefi, R. High Speed Turning of Inconel 718 Using Ceramic and Carbide Cutting Tools. Arab J. Sci. Eng. 2014, 39, 2323–2330.
   Web of Science ®Google Scholar
• Ezilarasan, C.; Senthilkumar, V. S.; Velayudham, A. Theoretical Predictions and Experimental Validations on Machining the NIMONIC C-263 Super Alloy. Simul. Modelling Pract. Th. 2014, 40, 192–207.
   Web of Science ®Google Scholar
• Khidhir, B. A.; Mohamed, B. Machining of Nickel Based Alloys Using Different Cemented Carbide Tools. J. Eng. Sci. Technol. 2010, 5, 264–271.
   Google Scholar
• Zhu, D.; Zhang, X. Ding, H. Tool Wear Characteristics in Machining of Nickel-Based Superalloys. Int. J. Mach. Tool Manuf. 2013, 64, 60–77.
   Web of Science ®Google Scholar
• Choudhury, I. A.; El-Baradie, M. A. Machinability of Nickel-Base Super Alloys: A General Review. J. Mater. Process. Technol. 1998, 77, 278–284.
   Web of Science ®Google Scholar
• Senthil Kumar, A.; Khan, M. A.; Thiraviam, R. Machining Parameters Optimization for Alumina Based Ceramic Cutting Tools Using Genetic Algorithm. Int. J. Machining Sci. Technol. 2006, 10(4), 471–489.
   Web of Science ®Google Scholar
• Thakur, D. G.; Ramamoorthy, B.; Vijayaraghavan, L. Machinability Investigation of Inconel 718 in High-Speed Turning. Int. J. Adv. Manu. Technol. 2009, 45(5), 421–429.
   Web of Science ®Google Scholar
• Ulutan, D.; Ozel, T. Machining Induced Surface Integrity in Titanium and Nickel Alloys: A Review. Int. J. Mach. Tools and Manu. 2011, 51(3), 250–280.
   Web of Science ®Google Scholar
• Jafarian, F.; et al. Experimental Investigation to Optimize Tool Life and Surface Roughness in Inconel 718 Machining. Mater. Manuf. Processes 2016, 31(13), 1683–1691.
   Web of Science ®Google Scholar
• Umbrello, D.; M’saoubi, R.; Outeiro, J. C. The Influence of Johnson–Cook Material Constants on Finite Element Simulation of Machining of AISI 316L Steel. Int. J. Mach. Tools and Manu. 2007, 47(3–4), 462–470.
   Web of Science ®Google Scholar
• Li, B.; Wang, X.; Yujin, H.; Chenggang, L. Analytical Prediction of Cutting Forces in Orthogonal Cutting Using Unequal Division Shearzone Model. Int. J. Adv. Manu. Technol. 2011, 54(5–8), 431–443.
   Web of Science ®Google Scholar
• Shaw, M. C. Metal Cutting Principle, Oxford: New York. 2005.
   Google Scholar
• Iqbal, S. A.; Mativenga, P. T.; Sheikh, M. A. A Comparative Study of the Tool–Chip Contact Length in Turning of Two Engineering Alloys for a Wide Range of Cutting Speeds. Int. J. Adv. Manu. Technol. 2009, 42(1), 30–40.
   Web of Science ®Google Scholar
• Akhtar, W.; Sun, J.; Sun, P.; Chen, W.; Saleem, Z. Tool Wear Mechanisms in the Machining of Nickel Based Super-Alloys: A Review. Rev. Front. Mech. Eng. 2014, 9(2), 106–119.
   Google Scholar
• Zou, B.; Huang, C.; Ji, W.; Li, S. Tool Wear Mechanisms in the Machining of Nickel Based Super-Alloys: A Review. Ceramics Int. 2014, 40(2), 3667–3677.
   Web of Science ®Google Scholar
• Jing, X.; Huaizhong, L.; Wang, J.; Tian, Y. Modelling the Cutting Forces in Micro-End-Milling Using a Hybrid Approach. Int. J. Adv. Manu. Technol. 2014, 73(9–12), 1647–1656.
   Web of Science ®Google Scholar
• Altintas, Y. Mechanics of Mechanics of Metal Cutting. In Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design (pp. 4–65). Cambridge: Cambridge University Press, 2012. doi: 10.1017/CBO9780511843723.004
   Google Scholar