Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 34, 2019 - Issue 2
Submit an article Journal homepage
500
Views
79
CrossRef citations to date
0
Altmetric
Letters

Stationary shoulder tool in friction stir processing: a novel low heat input tooling system for magnesium alloy

Vivek PatelShaanxi Key Laboratory of Friction Welding Technologies, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an, P.R. China;Mechanical Engineering Department, School of Technology, Pandit Deendayal Petroleum University, Gandhinagar, IndiaORCID Iconhttp://orcid.org/0000-0002-9015-7372View further author information
ORCID Icon,
Wenya LiShaanxi Key Laboratory of Friction Welding Technologies, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an, P.R. ChinaCorrespondence[email protected] [email protected]
ORCID Iconhttp://orcid.org/0000-0002-5067-843XView further author information
ORCID Icon &
Yaxin XuShaanxi Key Laboratory of Friction Welding Technologies, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an, P.R. ChinaView further author information
Pages 177-182 | Received 18 Aug 2018, Accepted 09 Oct 2018, Published online: 08 Nov 2018

References

  • Patel, V. V.; Badheka, V.; Kumar, A. Friction Stir Processing as a Novel Technique to Achieve Superplasticity in Aluminum Alloys: Process Variables, Variants, and Applications. Metallogr. Microstruct. Anal. 2016, 5, 278–293. DOI: 10.1007/s13632-016-0285-x.
  • Mishra, R. S.; Mahoney, M. W. Friction Stir Processing: A New Grain Refinement Technique to Achieve High Strain Rate Superplasticity in Commercial Alloys. Mater. Sci. Forum. 2001, 357, 507–514. DOI: 10.4028/www.scientific.net/MSF.357-359.507.
  • Nadammal, N.; Kailas, S. V.; Szpunar, J.; Suwas, S. Microstructure and Crystallographic Texture Evolution during the Friction-Stir Processing of a Precipitation-Hardenable Aluminum Alloy. JOM. 2015, 67, 1014–1021. DOI: 10.1007/s11837-015-1394-8.
  • Patel, V. V.; Badheka, V.; Kumar, A. Influence of Friction Stir Processed Parameters on Superplasticity of Al-Zn-Mg-Cu Alloy. Mater. Manuf. Processes. 2016, 31, 1573–1582. DOI: 10.1080/10426914.2015.1103868.
  • Ma, Z. Y.; Feng, A. H.; Chen, D. L.; Shen, J. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties. Crit. Rev. Solid State Mater. Sci.. 2018, 43, 269–333.
  • Rathee, S.; Maheshwari, S.; Siddiquee, A. N. Issues and Strategies in Composite Fabrication via Friction Stir Processing: A Review. Mater. Manuf. Processes. 2018, 33, 239–261.
  • Hütsch, L. L.; Hilgert, J.; Herzberg, K.; dosSantos, J.; Huber, N. Temperature and Texture Development during High Speed Friction Stir Processing of Magnesium AZ31. Adv. Energy Mater. 2012, 14, 762–771. DOI: 10.1002/adem.v14.9.
  • Cao, G.; Zhang, D.; Chai, F.; Zhang, W.; Qiu, C. High-Strain-Rate Superplasticity in Mg–Y–Nd Alloy Prepared by Submerged Friction Stir Processing. Adv. Energy Mater. 2016, 18, 312–318. DOI: 10.1002/adem.v18.2.
  • Chai, F.; Zhang, D. T.; Li, Y. Y. Effect of Rotation Speeds on Microstructures and Tensile Properties of Submerged Friction Stir Processed AZ31 Magnesium Alloy. Mater. Res. Innovations. 2014, 18, 152–156. DOI: 10.1179/1432891714Z.000000000673.
  • Darras, B.; Kishta, E. Submerged Friction Stir Processing of AZ31 Magnesium Alloy. Mater. Des. 2013, 47, 133–137. DOI: 10.1016/j.matdes.2012.12.026.
  • Alavi Nia, A.; Omidvar, H.; Nourbakhsh, S. H. Effects of an Overlapping Multi-Pass Friction Stir Process and Rapid Cooling on the Mechanical Properties and Microstructure of AZ31 Magnesium Alloy. Mater. Des. 2014, 58, 298–304. DOI: 10.1016/j.matdes.2014.01.069.
  • Chang, C. I.; Du, X. H.; Huang, J. C. Producing Nanograined Microstructure in Mg–Al–Zn Alloy by Two-Step Friction Stir Processing. Scr. Mater. 2008, 59, 356–359. DOI: 10.1016/j.scriptamat.2008.04.003.
  • Yuan, W.; Mishra, R. S.; Carlson, B.; Mishra, R. K.; Verma, R.; Kubic, R. Effect of Texture on the Mechanical Behavior of Ultrafine Grained Magnesium Alloy. Scr. Mater. 2011, 64, 580–583.
  • Zhou, Z.; Yue, Y.; Ji, S.; Li, Z.; Zhang, L. Effect of Rotating Speed on Joint Morphology and Lap Shear Properties of Stationary Shoulder Friction Stir Lap Welded 6061-T6 Aluminum Alloy. Int. J. Adv. Manuf. Technol. 2017, 88, 2135–2141. DOI: 10.1007/s00170-016-8924-6.
  • Chai, F.; Yan, F.; Wang, W.; Lu, Q.; Fang, X. Microstructures and Mechanical Properties of AZ91 Alloys Prepared by Multi-Pass Friction Stir Processing. J. Mater. Res. 2018, 33, 1789–1796.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.