WEDM of layered composite: analyzing material removal and cut quality issues

References

• Araújo, A. A. D.; Bastian, F. L.; Castrodeza, E. M. CTOD-R Curves of the Metal-Clad Interface of API X52 Pipes Cladded with an Inconel 625 Alloy by Welding Overlay. Fatigue. Fract. Eng. Mater. Struct. 2016, 39(12), 1477–1487. DOI: 10.1111/ffe.12462.
   Web of Science ®Google Scholar
• Sreeraj, P.; Kannan, T.; Maji, S. Estimation of Optimum Dilution in the GMAW Process Using Integrated ANN-GA https://www.hindawi.com/journals/je/2013/285030/(accessed Feb 15, 2019). DOI: 10.1155/2013/285030.
   Google Scholar
• Muro, M.; Leunda, J.; Artola, G.; Soriano, C. Microstructural Tuning of a Laser-Cladding Layer by Means of a Mix of Commercial Inconel 625 and AISI H13 Powders. Materials. 2019, 12(3), 544. DOI: 10.3390/ma12030544.
   Web of Science ®Google Scholar
• Lai, Q.; Abrahams, R.; Yan, W.; Qiu, C.; Mutton, P.; Paradowska, A.; Soodi, M.; Wu, X. Influences of Depositing Materials, Processing Parameters and Heating Conditions on Material Characteristics of Laser-Cladded Hypereutectoid Rails. J. Mater. Process. Technol. 2019, 263, 1–20. DOI: 10.1016/j.jmatprotec.2018.07.035.
   Web of Science ®Google Scholar
• Li, B. X.; Chen, Z. J.; He, W. J.; Wang, P. J.; Lin, J. S.; Wang, Y.; Peng, L.; Li, J.; Liu, Q. Effect of Interlayer Material and Rolling Temperature on Microstructures and Mechanical Properties of Titanium/Steel Clad Plates. Mater. Sci. Eng. A. 2019, 749, 241–248. DOI: 10.1016/j.msea.2019.02.018.
   Web of Science ®Google Scholar
• Song, Y.; Kim, J. S.; Park, S. H.; Kim, H.; Won, C.; Kim, J.-S.; Yoon, J. Hot Rolling of Flame Retardant Magnesium and Aluminum Alloys to Produce a Cladding Plate. Int. J. Precis. Eng. Manuf. 2018, 19(4), 521–527. DOI: 10.1007/s12541-018-0063-6.
   Web of Science ®Google Scholar
• Zhang, P.; Liu, Z. Plastic Deformation and Critical Condition for Orthogonal Machining Two-Layered Materials with Laser Cladded Cr-Ni-Based Stainless Steel onto AISI 1045. J. Cleaner. Prod. 2017, 149, 1033–1044. DOI: 10.1016/j.jclepro.2017.02.167.
   Web of Science ®Google Scholar
• Hohe, J.; Brand, M.; Siegele, D. Fracture Analysis of Cladded Components considering Residual Stresses. Pamm. 2008, 8(1), 10209–10210. DOI: 10.1002/pamm.200810209.
   Google Scholar
• Masoumi, H.; Safavi, S. M.; Salehi, M.; Nahvi, S. M. Effect of Grinding on the Residual Stress and Adhesion Strength of HVOF Thermally Sprayed WC–10Co–4Cr Coating. Mater. Manuf. Processes. 2014, 29(9), 1139–1151. DOI: 10.1080/10426914.2014.930893.
   Web of Science ®Google Scholar
• Masoumi, H.; Safavi, S. M.; Salehi, M. Grinding Force, Specific Energy and Material Removal Mechanism in Grinding of HVOF-Sprayed WC–Co–Cr Coating. Mater. Manuf. Processes. 2014, 29(3), 321–330. DOI: 10.1080/10426914.2013.872261.
   Web of Science ®Google Scholar
• Zhao, Y.; Sun, J.; Li, J. Study on Chip Morphology and Milling Characteristics of Laser Cladding Layer. Int. J. Adv. Manuf. Technol. 2015, 77(5), 783–796. DOI: 10.1007/s00170-014-6483-2.
   Web of Science ®Google Scholar
• Wang, M.; Xu, B.; Zhang, J.; Dong, S.; Wei, S. Experimental Observations on Surface Roughness, Chip Morphology, and Tool Wear Behavior in Machining Fe-Based Amorphous Alloy Overlay for Remanufacture. Int. J. Adv. Manuf. Technol. 2013, 67(5), 1537–1548. DOI: 10.1007/s00170-012-4588-z.
   Web of Science ®Google Scholar
• Quintino, L.; Liu, L.; Miranda, R. M.; Silva, R. J. C.; Hu, A.; Zhou, Y. Cutting NiTi with Femtosecond Laser https://www.hindawi.com/journals/amse/2013/198434/(accessed Feb 16, 2019). DOI: 10.1155/2013/198434.
   Google Scholar
• LotfiNeyestanak, A. A.; Daneshmand, S. The Effect of Operational Cutting Parameters on Nitinol-60 in Wire Electrodischarge Machining https://www.hindawi.com/journals/amse/2013/457186/(accessed Feb 16, 2019). DOI: 10.1155/2013/457186.
   Google Scholar
• Mandal, A.; Dixit, A. R.; Das, A. K.; Mandal, N. Modeling and Optimization of Machining Nimonic C-263 Superalloy Using Multicut Strategy in WEDM. Mater. Manuf. Processes. 2016, 31(7), 860–868. DOI: 10.1080/10426914.2015.1048462.
   Web of Science ®Google Scholar
• Rao, M. S.; Venkaiah, N. Multi-Response Optimisation for MRR and Ra in WEDM Process of Nimonic-263 Super Alloy. Int. J. Mater. Prod. Technol. 2018, 56(3), 187. DOI: 10.1504/IJMPT.2018.090813.
   Web of Science ®Google Scholar
• Kumar, V.; Jangra, K. K.; Kumar, V.; Sharma, N. GA-Based Optimisation Using RSM in WEDM of Nimonic-90: A Nickel-Based Super Alloy. Int. J. Ind. Syst. Eng. 2018, 28(1), 53. DOI: 10.1504/IJISE.2018.088564.
   Google Scholar
• Mukhopadhyay, A.; Barman, T. K.; Sahoo, P.; Davim, J. P. Modeling and Optimization of Fractal Dimension in Wire Electrical Discharge Machining of EN 31 Steel Using the ANN-GA Approach. Materials. 2019, 12(3), 454. DOI: 10.3390/ma12030454.
   PubMed Web of Science ®Google Scholar
• Vignesh, M.; Ramanujam, R. Response Optimisation in Wire Electrical Discharge Machining of AISI H11 Tool Steel Using Taguchi - GRA Approach. Int. J. Mach. Mach. Mater. 2018, 20(5), 474. DOI: 10.1504/IJMMM.2018.096037.
   Google Scholar
• Pramanik, A.; Basak, A. K.; Dixit, A. R.; Chattopadhyaya, S. Processing of Duplex Stainless Steel by WEDM. Mater. Manuf. Processes. 2018, 33(14), 1559–1567. DOI: 10.1080/10426914.2018.1453165.
   Web of Science ®Google Scholar
• Tang, L.; Guo, Y. F. Influence of Discharge Energy Parameters on S-03 High-Strength Steel for Aerospace Components. Mater. Manuf. Processes. 2014, 29(1), 53–58. DOI: 10.1080/10426914.2013.852214.
   Web of Science ®Google Scholar
• Gopal, P. M.; Prakash, K. S.; Jayaraj, S. WEDM of Mg/CRT/BN Composites: Effect of Materials and Machining Parameters. Mater. Manuf. Processes. 2017, 33(1), 77–84. DOI: 10.1080/10426914.2017.1279316.
   Web of Science ®Google Scholar
• Thankachan, T.; Soorya Prakash, K.; Loganathan, M. WEDM Process Parameter Optimization of FSPed Copper-BN Composites. Mater. Manuf. Processes. 2018, 33(3), 350–358. DOI: 10.1080/10426914.2017.1339311.
   Web of Science ®Google Scholar
• Kumar, N. E. A.; Babu, A. S. Influence of Input Parameters on the Near-Dry WEDM of Monel Alloy. Mater. Manuf. Processes. 2018, 33(1), 85–92. DOI: 10.1080/10426914.2017.1279297.
   Web of Science ®Google Scholar
• Ishfaq, K.; Mufti, N. A.; Ahmed, N.; Pervaiz, S. Abrasive Waterjet Cutting of Cladded Material: Kerf Taper and MRR Analysis. Mater. Manuf. Processes. 2019, 34(5), 544–553. DOI: 10.1080/10426914.2018.1544710.
   Web of Science ®Google Scholar