Examinations concerning the electric discharge machining of AZ91/5B₄C_P composites utilizing distinctive electrode materials

References

• Uthayakumar, M.; Vinoth Babu, K.; Thirumalai Kumaran, S.; Suresh Kumar, S.; Winowlin Jappes, J. T.; Rajan, T. P. D. Study on the machining of Al–SiC functionally graded metal matrix composite using die-sinking EDM, Particulate Science and Technology, 2019, 37(1), 103–109. DOI: 10.1080/02726351.2017.1346020
   Google Scholar
• Payal, H. S.; Sethi, B. L. Non-Conventional Machining Processes as Viable Alternatives for Production with Specific Reference to Electrical Discharge Machining. J. Sci. Ind. Res. (India). 2003, 62(7), 678–682.
   Web of Science ®Google Scholar
• Iosub, A.; Nagit, G.; Negoescu, F. Tool Wear Investigation in Electric Discharge Machining of Aluminum Matrix Composite Materials. The Annals of" Dunarea De Jos" University of Galati Fascicle V, Technology in Machine Building, 2009, 225–228. DOI:10.1016/j.matpr.2017.07.227.
   Google Scholar
• Valaki, J. B.; Rathod, P. P. Investigating Feasibility through Performance Analysis of Green Dielectrics for Sustainable Electric Discharge Machining. Mater. Manuf. Process. 2016, 31(4), 541–549. DOI: 10.1080/10426914.2015.1070430.
   Web of Science ®Google Scholar
• Nallusamy, S.;. Analysis of MRR and TWR on OHNS Die Steel with Different Electrodes Using Electrical Discharge Machining. Int. J. Eng. Res. Africa. 2016, 22(February), 112–120. DOI: 10.4028/www.scientific.net/JERA.22.112.
   Google Scholar
• Singh, S.; Maheshwari, S.; Pandey, P. C. Some Investigations into the Electric Discharge Machining of Hardened Tool Steel Using Different Electrode Materials. J. Mater. Process. Technol. 2004, 149(1–3), 272–277. DOI: 10.1016/j.jmatprotec.2003.11.046.
   Web of Science ®Google Scholar
• Straka, Ľ.;. Optimization of Material Removal Rate and Tool Wear Rate of Cu Electrode in Die-Sinking EDM of Tool Steel. Int. J. Adv. Manuf. Technol. 2018, 97(5–8), 2647–2654. DOI: 10.1007/s00170-018-2150-3.
   Web of Science ®Google Scholar
• Klocke, F.; Schwade, M.; Klink, A.; Veselovac, D. Analysis of Material Removal Rate and Electrode Wear in Sinking EDM Roughing Strategies Using Different Graphite Grades. Procedia CIRP. 2013, 6, 163–167. DOI: 10.1016/j.procir.2013.03.079.
   Google Scholar
• Lee, S. H.; Li, X. P. Study of the Effect of Machining Parameters on the Machining Characteristics in Electrical Discharge Machining of Tungsten Carbide. J. Mater. Process. Technol. 2001, 115(3), 344–358. DOI: 10.1016/S0924-0136(01)00992-X.
   Web of Science ®Google Scholar
• Talla, G.; Gangopadhyay, S. Effect of Impregnated Powder Materials on Surface Integrity Aspects of Inconel 625 during Electrical Discharge Machining. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2016, 232(7), 1259–1272. DOI: 10.1177/0954405416666904.
   Web of Science ®Google Scholar
• Singh, S.; Maheshwari, S.; Pandey, P. C. Some Investigations into the Electric Discharge Machining of Hardened Tool Steel Using Different Electrode Materials. J. Mater. Process. Technol. 2004, 149(1–3), 272–277. DOI: 10.1016/j.jmatprotec.2003.11.046.
   Web of Science ®Google Scholar
• Jafferson, J. M.; Hariharan, P.; Machining Performance Of Cryogenically Treated Electrodes in Microelectric Discharge Machining: A Comparative Experimental Study, Materials and Manufacturing Processes, 2013, 28(4), 397-402, DOI: 10.1080/10426914.2013.763955
   Google Scholar
• Batish, A.; Bhattacharya, A.; Kumar, N. Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM, Particulate Science and Technology, 2015, 33(2), 150-158, DOI: 10.1080/02726351.2014.947659
   Google Scholar
• Hasc, A.;. Electrical Discharge Machining of Titanium Alloy (Ti – 6al – 4V). Appl. Surf. Sci. 2007, 253, 9007–9016. DOI: 10.1016/j.apsusc.2007.05.031.
   Web of Science ®Google Scholar
• Al-Ghamdi, K.; Taylan, O. Computers & Industrial Engineering A Comparative Study on Modelling Material Removal Rate by ANFIS and Polynomial Methods in Electrical Discharge Machining Process. Comput. Ind. Eng. 2015, 79, 27–41.
   Web of Science ®Google Scholar
• Choudhary, B. S.; Kant, K.; Saini, P. Analysis of MRR and SR with Different Electrode for SS 316 on Die-Sinking EDM Using Taguchi Technique Analysis of MRR and SR with Different Electrode for SS316 on Di-SinkingEDMusingTaguchiTechnique Analysis of MRR and SR with Different Electrode for SS 316 on Die-Sin. Global J Res. Eng. 2013, 13, 3.
   Google Scholar
• Jaya, H. T.; Tunggal, D. The Effect of Edm Die-Sinking Parameters on Material Removal Rate of Beryllium Copper Using Full Factorial Method Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Advanced Manufacturing Centre, Universiti Teknikal Malaysia Mel. Middle East J. Sci. Res. 2013, 16(1), 44–50. DOI: 10.5829/idosi.mejsr.2013.16.01.2249.
   Google Scholar
• Bai, X.; Zhang, Q.; Zhang, J.; Kong, D.; Yang, T. Machining Efficiency of Powder Mixed near Dry Electrical Discharge Machining Based on Different Material Combinations of Tool Electrode and Workpiece Electrode. J. Manuf. Process. 2013, 15(4), 474–482. DOI: 10.1016/j.jmapro.2013.09.005.
   Web of Science ®Google Scholar
• Gopalakannan, S.; Senthilvelan, T.; Ranganathan, S. Modeling and Optimization of EDM Process Parameters on Machining of Al7075-B4C MMC Using RSM. Procedia Eng. 2012, 38, 685–690. DOI: 10.1016/j.proeng.2012.06.086.
   Google Scholar
• Batish, A.; Bhattacharya, A.; Kumar, N. Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM. Part. Sci. Technol. 2015, 33(2), 150–158. DOI: 10.1080/02726351.2014.947659.
   Web of Science ®Google Scholar
• Amorim, F. L.; Weingaertner, W. L. Die-Sinking Electrical Discharge Machining of a High-Strength Copper- Based Alloy for Injection Molds. Braz. Soc. Mech. Sci. Eng. 2004, XXVI(2), 137–144. DOI: 10.1590/S1678-58782004000200004.
   Google Scholar
• Article, O.;. Multi-Response Optimization of EDM with Al – Cu – Si – TiC P/M Composite Electrode. Int. J. Adv. Manuf. Technol. 2009, 44(1–2), 100–113. DOI: 10.1007/s00170-008-1825-6.
   Web of Science ®Google Scholar
• Amorim, F. L.; Lohrengel, A. Selective Laser Sintering of Mo-CuNi Composite to Be Used as EDM Electrode. Rapid Prototyp. J. 2014, 20(1), 59–68. DOI: 10.1108/RPJ-04-2012-0035.
   Web of Science ®Google Scholar
• Aas, K. L.;. Performance of Two Graphite Electrode Qualities in EDM of Seal Slots in a Jet Engine Turbine Vane. J. Mater. Process. Technol. 2004, 149(1–3), 152–156. DOI: 10.1016/j.jmatprotec.2004.02.005.
   Web of Science ®Google Scholar
• Prakash, C.; Kansal, H. K.; Pabla, B. S.; Puri, S. Experimental Investigations in Powder Mixed Electric Discharge Machining of Ti–35Nb–7Ta–5Zrβ-Titanium Alloy. Mater. Manuf. Process. 2017, 32(3), 274–285. DOI: 10.1080/10426914.2016.1198018.
   Web of Science ®Google Scholar
• Jothimurugan, R.; Amirthagadeswaran, K. S. Performance of Additive Mixed Kerosene-Servotherm in Electrical Discharge Machining of Monel 400TM. Mater. Manuf. Process. 2016, 31(4), 432–438. DOI: 10.1080/10426914.2014.984202.
   Web of Science ®Google Scholar
• Sharma, R.; Singh, J. Effect of Powder Mixed Electrical Discharge Machining (PMEDM) on Difficult-to-Machine Materials – A Systematic Literature Review. J. Manuf. Sci. Prod. 2014, 14(4), 1–24. DOI: 10.1515/jmsp-2014-0016.
   Google Scholar
• Ndaliman, M. B.; Khan, A. A.; YAli, M. Influence of Dielectric Fluids on Surface Properties of Electrical Discharge Machined Titanium Alloy. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2013, 227(9), 1310–1316.
   Web of Science ®Google Scholar
• Chundru, V. R.; Koona, R.; Pujari, S. R. Surface Modification of Ti6Al4V Alloy Using EDMed Electrode Made with Nano- and Micron-Sized TiC/Cu Powder Particles. Arab. J. Sci. Eng. 2018. DOI: 10.1007/s13369-018-3561-z.
   Web of Science ®Google Scholar
• Muthuramalingam, T.; Mohan, B. Influence of Discharge Current Pulse on Machinability in Electrical Discharge Machining. Mater. Manuf. Process. 2013, 28(4), 375–380. DOI: 10.1080/10426914.2012.746700.
   Web of Science ®Google Scholar
• Sahu, A. K.; Mohanty, P. P.; Sahoo, S. K. Electro Discharge Machining of Ti-Alloy (Ti6a14v) and 316 Stainless Steel and Optimization of Process Parameters by Grey Ray Analysis (GRA) Method. Advances in 3D Printing & Additive Manufacturing Technologies. 2017, 65–79. DOI: 10.1007/978-981-10-0812-2_6
   Google Scholar
• Pramanik, A.;. Electrical Discharge Machining of MMCs Reinforced with Very Small Particles. Mater. Manuf. Process. 2016, 31(4), 397–404. DOI: 10.1080/10426914.2015.1048360.
   Web of Science ®Google Scholar
• Pilligrin, J. C.; Asokan, P.; Jerald, J.; Kanagaraj, G. Effects of Electrode Materials on Performance Measures of Electrical Discharge Micro-Machining. Mater. Manuf. Process. 2018, 33(6), 606–615. DOI: 10.1080/10426914.2017.1364757.
   Web of Science ®Google Scholar
• Ranjith, R.; Giridharan, P. K.; Devaraj, J. Influence of Titanium-Coated(B4C + SiC) Particles on Electric Discharge Machining of AA7050 Hybrid Composites. High Temp. Mater. Process. 2016, 20(2). DOI: 10.1615/HighTempMatProc.2016017308.
   Google Scholar
• Kar, S.; Patowari, P. K. Electrode Wear Phenomenon and Its Compensation in Micro Electrical Discharge Milling: A Review. Mater. Manuf. Process. 2018, 33(14), 1491–1517. DOI: 10.1080/10426914.2018.1453144.
   Web of Science ®Google Scholar
• Jha, B.; Ram, K.; Rao, M. An Overview of Technology and Research in Electrode Design and Manufacturing in Sinking Electrical Discharge Machining. J. Eng. Sci. Technol. Rev. 2011, 4(2), 118–130. DOI: 10.25103/jestr.042.02.
   Google Scholar
• Khan, M. A. R.; Rahman, M. M.; Kadirgama, K. An Experimental Investigation on Surface Finish in Die-Sinking EDM of Ti-5Al-2.5Sn. Int. J. Adv. Manuf. Technol. 2015, 77(9–12), 1727–1740. DOI: 10.1007/s00170-014-6507-y.
   Web of Science ®Google Scholar
• Muthuramalingam, T.; Mohan, B.; Jothilingam, A. Effect of Tool Electrode Resolidification on Surface Hardness in Electrical Discharge Machining. Mater. Manuf. Process. 2014, 29(11–12), 1374–1380. DOI: 10.1080/10426914.2014.930956.
   Web of Science ®Google Scholar
• Sidhu, S. S.; Batish, A.; Kumar, S. Study of Surface Properties in Particulate-Reinforced Metal Matrix Composites (Mmcs) Using Powder-Mixed Electrical Discharge Machining (EDM). Mater. Manuf. Process. 2014, 29(1), 46–52. DOI: 10.1080/10426914.2013.852211.
   Web of Science ®Google Scholar
• Cyril, J.; Paravasu, A.; Jerald, J.; Sumit, K.; Kanagaraj, G. Experimental Investigation on Performance of Additive Mixed Dielectric during Micro-Electric Discharge Drilling on 316L Stainless Steel. Mater. Manuf. Process. 2017, 32(6), 638–644. DOI: 10.1080/10426914.2016.1221107.
   Web of Science ®Google Scholar
• Razak, M. A.; Abdul-Rani, A. M.; Nanimina, A. M. Improving EDM Efficiency with Silicon Carbide Powder-Mixed Dielectric Fluid. Int. J. Mater. Mech. Manuf. 2015, 3(1), 40–43. DOI: 10.7763/IJMMM.2015.V3.163.
   Google Scholar
• Bhattacharya, A.; Batish, A.; Kumar, N. Surface Characterization and Material Migration during Surface Modification of Die Steels with Silicon, Graphite and Tungsten Powder in EDM Process. J. Mech. Sci. Technol. 2013, 27(1), 133–140. DOI: 10.1007/s12206-012-0883-8.
   Web of Science ®Google Scholar
• Kumar, S. S.; Uthayakumar, M.; Kumaran, S. T.; Parameswaran, P. Electrical Discharge Machining of Al(6351)-SiC-B4C Hybrid Composite. Mater. Manuf. Process. 2014, 29(11–12), 1395–1400. DOI: 10.1080/10426914.2014.952024.
   Web of Science ®Google Scholar
• Tao, J.; Shih, A. J.; Ni, J. Near-Dry EDM Milling of Mirror-Like Surface Finish. Int. J. Electr. Mach. No.13, January 2008, 13, 29–33. DOI: 10.2526/ijem.13.29.
   Google Scholar
• Dvivedi, A.; Kumar, P.; Singh, I. Experimental Investigation and Optimisation in EDM of Al 6063 SiC Metal Matrix Composite. Int. J. Mach. Mach. Mater. 2008, 3(3/4), 293. DOI: 10.1504/IJMMM.2008.020965.
   Google Scholar
• Muthuramalingam, T.; Mohan, B. Influence of Tool Electrode Properties on Machinability in Spark Erosion Machining. Mater. Manuf. Process. 2013, 28(8), 939–943. DOI: 10.1080/10426914.2013.763973.
   Web of Science ®Google Scholar
• Prihandana, G. S.; Sriani, T.; Mahardika, M.; Hamdi, M.; Miki, N.; Wong, Y. S.; Mitsui, K. Application of Powder Suspended in Dielectric Fluid for Fine Finish Micro-EDM of Inconel 718. Int. J. Adv. Manuf. Technol. 2014, 75(1–4), 599–613. DOI: 10.1007/s00170-014-6145-4.
   Web of Science ®Google Scholar
• Singh, A. K.; Kumar, S.; Singh, V. P. Optimization of Parameters Using Conductive Powder in Dielectric for EDM of Super Co 605 with Multiple Quality Characteristics. Mater. Manuf. Process. 2014, 29(3), 267–273. DOI: 10.1080/10426914.2013.864397.
   Web of Science ®Google Scholar
• Kumar, A.; Mandal, A.; Dixit, A. R.; Das, A. K. Performance Evaluation of Al2O3nano Powder Mixed Dielectric for Electric Discharge Machining of Inconel 825. Mater. Manuf. Process. 2018, 33(9), 986–995. DOI: 10.1080/10426914.2017.1376081.
   Web of Science ®Google Scholar
• Yeo, S. H.; Tan, P. C.; Kurnia, W. Effects of Powder Additives Suspended in Dielectric on Crater Characteristics for Micro Electrical Discharge Machining. J. Micromech. Microeng. 2007, 17, 11.
   Web of Science ®Google Scholar
• Kitamura, T.; Kunieda, M. Clarification of EDM Gap Phenomena Using Transparent Electrodes. CIRP Ann. - Manuf. Technol. 2014, 63(1), 213–216. DOI: 10.1016/j.cirp.2014.03.059.
   Web of Science ®Google Scholar
• Singh, B.; Kumar, J.; Kumar, S. Investigation of the Tool Wear Rate in Tungsten Powder-Mixed Electric Discharge Machining of AA6061/10%SiC P Composite. Mater. Manuf. Process. 2016, 31(4), 456–466. DOI: 10.1080/10426914.2015.1025965.
   Web of Science ®Google Scholar
• Ekmekci, N.; Ekmekci, B. Electrical Discharge Machining of Ti6Al4V in Hydroxyapatite Powder Mixed Dielectric Liquid. Mater. Manuf. Process. 2016, 31(13), 1663–1670. DOI: 10.1080/10426914.2015.1090591.
   Web of Science ®Google Scholar
• Ali, M. A.; Suraya, L.; Nor, H. I. K.; Hussein, N. I. S.; Muhamad, M. R.; Manshoor, B.; Lajis, M. A.; Izamshah, R.; Hadzley, M. The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Appl. Mech. Mater. 2013, 465–466, 1214–1218. DOI: 10.4028/www.scientific.net/AMM.465-466.1214.
   Google Scholar
• Kuriachen, B.; Mathew, J. Effect of Powder Mixed Dielectric on Material Removal and Surface Modification in Microelectric Discharge Machining of Ti-6Al-4V. Mater. Manuf. Process. 2016, 31(4), 439–446. DOI: 10.1080/10426914.2015.1004705.
   Web of Science ®Google Scholar
• Dhakar, K.; Dvivedi, A. Parametric Evaluation on Near-Dry Electric Discharge Machining. Mater. Manuf. Process. 2016, 31(4), 413–421. DOI: 10.1080/10426914.2015.1037905.
   Web of Science ®Google Scholar