Laser cladding Ni-Ti-Cr alloy coatings with different process parameters

References

• Ali Dilawary, S. A.; Motallebzadeh, A.; Akhter, R.; Atar, E.; Cimenoglua, H. Enhanced Wear Resistance of Stellite 12 by Mo Addition and LSM. Surf. Eng. 2018, 34, 569–576. DOI: 10.1080/02670844.2017.1393164.
   Web of Science ®Google Scholar
• Nie, Y.; Zhang, P.; Xi, W.; Guojin, L.; Yan, H.; Zhishui, Y. Rapid Prototyping of 4043 Al-alloy Parts by Cold Metal Transfer. Sci. Technol. Weld. 2018, 23(6), 527–535. DOI: 10.1080/13621718.2018.1438236.
   Web of Science ®Google Scholar
• Zhang, C.; Zheng, B.; Wang, J.; Luo, Y. Solution Precursor Plasma Sprayed Tungsten Oxide Particles and Coatings. Mater. Manuf. Process. 2018, 33(10), 1107–1114. DOI: 10.1080/10426914.2017.1415444.
   Web of Science ®Google Scholar
• Ravi Raja Malar Vannan, R.; Moorthy, T. V.; Hariharan, P.; Prabhu, P. Effect of Physical Vapor Deposited Bilayer (AlCrN + TiAlN) Coating on High-speed Steel Single Point Cutting Tool. Mater. Manuf. Process. 2017, 32(4), 373–376.
   Web of Science ®Google Scholar
• Kaushal, S.; Gupta, D.; Bhowmick, H. On Surface Modification of Austenitic Stainless Steel Using Microwave Processed Ni/Cr3C2 composite Cladding. Surf. Eng. 2018, 34(11), 809–817. DOI: 10.1080/02670844.2017.1362808.
   Web of Science ®Google Scholar
• Chuang, H.-C.; Sanchez, J. Feasibility Study on sc-Ar Electroplating for Metal Coating Fabrication. Surf. Eng. 2018, 34(6), 440–445. DOI: 10.1080/02670844.2017.1358482.
   Web of Science ®Google Scholar
• Shi, Y.; Cong, N.; Liu, J.; Huang, G. Microstructure and Properties of Laser Cladhigh-Entropy Alloy Coating on Aluminium. Mater. Sci. Tech. Lond. 2018, 34(10), 1239–1245. DOI: 10.1080/02670836.2018.1444921.
   Google Scholar
• Stanciu, E. M.; Pascu, A.; Ţierean, M. H.; Voiculescu, I.; Roată, I. C.; Croitoru, C.; Hulka, I. Dual Coating Laser Cladding of NiCrBSi and Inconel 718. Mater. Manuf. Process. 2016, 31(12), 1556–1564. DOI: 10.1080/10426914.2015.1103866.
   Web of Science ®Google Scholar
• Cai, Y.; Manladan, S. M.; Luo, Z. Tribological Behaviour of the Double FeCoNiCrCux Middle-entropy Alloy Coatings. Surf. Eng. 2019, 35(1), 14–21. DOI: 10.1080/02670844.2018.1444548.
   Web of Science ®Google Scholar
• Mudassar Rauf, M.; Muhammad Shahid, Y. A.; Nusair Khan, D. A.; Hussain, A.; Akhter, R. Cladding of Ni-20Cr Coatings by Optimizing the CO2 Laser Parameters. Arab. J. Sci. Eng. 2016, 41(6), 2353–2362.
   Google Scholar
• Barekat, M.; Razavi, R. S.; Ghasemi, A. Wear Behavior of Laser-Cladded Co-Cr-Mo Coating on γ-TiAl Substrate. J. Mater. Eng. Perform. 2017, 26(7), 3226–3238. DOI: 10.1007/s11665-017-2745-0.
   Web of Science ®Google Scholar
• Gao, W.; Chang, C.; Guang, L.; Xue, Y.; Wang, J.; Zhang, Z.; Lin, X. Study on the Laser Cladding of FeCrNi Coating. Optik. 2019, 178, 950–957. DOI: 10.1016/j.ijleo.2018.10.062.
   Web of Science ®Google Scholar
• Cheng, Y.-H.; Cui, R.; Wang, H.-Z.; Han, Z.-T. Effect of Processing Parameters of Laser on Microstructure and Properties of Cladding 42crmo Steel. Int. J. Adv. Manuf. Technol. 2018, 96, 1715–1724.
   Web of Science ®Google Scholar
• Norhafzan, B.; Aqida, S. N.; Chikarakara, E.; Brabazon, D. Surface Modification of AISI H13 Tool Steel by Laser Cladding with NiTi Powder. Appl. Phys. A. 2016, 12, 384–389. DOI: 10.1007/s00339-016-9937-6.
   Google Scholar
• Emamian, A.; Corbin, S. F.; Khajepour, A. Effect of Laser Cladding Process Parameters on Clad Quality and In-situ Formed Microstructure of Fe-TiC Composite Coatings. Surf. Coat. Technol. 2010, 205, 2007–2015.
   Web of Science ®Google Scholar
• Zanzarin, S.; Bengtsson, S.; Molinari, A. Study of Dilution in Laser Cladding of a Carbon Steel Substrate with Co Alloy Powders. Powder Metal. 2016, 59, 85–94. DOI: 10.1080/00325899.2015.1118842.
   Web of Science ®Google Scholar
• Kai-ming, W.; Han-guang, F.; Yu-long, L.; Yong-ping, L.; Shi-zhong, W.; Zhen-qing, S. Effect of Power on Microstructure and Properties of Laser Cladding NiCrBSi Composite Coating. Trans. IMF. 2017, 95, 328–336. DOI: 10.1080/00202967.2017.1355640.
   Web of Science ®Google Scholar
• Vostřák, M.; Houdková, Š.; Bystrianský, M.; Česánek, Z. The Influence of Process Parameters on Structure and Abrasive Wear Resistance of Laser Clad WC-NiCrBSi Coatings. Mater. Res. Express. 2018, 5, 096522.
   Web of Science ®Google Scholar
• Thiyagarajan, B.; Senthilkumar, V. Experimental Studies on Fly-ash Erosion Behavior of Ni-Cr Based Nanostructured Thermal Spray Coating in Boiler Tubes. Mater. Manuf. Process. 2017, 32(11), 1209–1217. DOI: 10.1080/10426914.2016.1257798.
   Web of Science ®Google Scholar
• Farayibi, P. K.; Abioye, T. E.; Clare, A. T. A Parametric Study on Laser Cladding of Ti-6Al-4V Wire and WC/W2C Powder. Int. J. Adv. Manuf. Technol. 2016, 87, 3349–3358. DOI: 10.1007/s00170-016-8743-9.
   Web of Science ®Google Scholar
• Zdenek, V.; Milan, H.; Mach, J. 3D Model of Laser Treatment by a Moving Heat Source with General Distribution of Energy in the Beam. Appl. Opt. 2016, 55(34), 140–150. DOI: 10.1364/AO.55.00D140.
   PubMed Web of Science ®Google Scholar
• Krendelsberger, N.; Weitzer, F.; Yong, D.; Schuster, J. C. Constitution of the Ternary System Cr-Ni-Ti. J. Alloy. Compd. 2013, 575, 48–53. DOI: 10.1016/j.jallcom.2013.04.061.
   Web of Science ®Google Scholar
• Shu-rong, F.; Hai-bo, T.; Shu-quan, Z.; Hua-ming, W. Microstructure and Wear Resistance of Laser Clad TiB-TiC/TiNi-Ti2Ni Intermetallic Coating on Titanium Alloy. Trans. Nonferrous Met. Soc. China. 2012, 22, 1667–1673. DOI: 10.1016/S1003-6326(11)61371-X.
   Web of Science ®Google Scholar
• Wang, D.; Zhao, H.; Wang, H.; Yuyan, L.; Liu, X.; Guo, H. E. Failure Mechanism of a Stellite Coating on Heat-Resistant Steel. Metall. Mater. Trans. A. 2017, 48A, 4356–4364. DOI: 10.1007/s11661-017-4181-z.
   Web of Science ®Google Scholar
• Abioye, T. E.; Medrano-Tellez, A.; Farayibi, P. K.; Oke, P. K. Laser Metal Deposition of Multi-track Walls of 308lsi Stainless Steel. Mater. Manuf. Process. 2017, 32(14), 1660–1666.
   Web of Science ®Google Scholar
• Shou-Ming, Y.; Liu, D.-X.; Zhang, X.-H.; Liu, C.-S. A Comparison Study of Wear and Fretting Fatigue Behavior between Cr-alloyed Layer and Cr-Ti Solid-solution Layer. Acta Metall. Sin-Engl. 2016, 29(8), 782–792. DOI: 10.1007/s40195-016-0449-3.
   Web of Science ®Google Scholar
• Jin, Y. J.; Li, R. F.; Zheng, Q. C.; Li, H.; Wu, M. F. Structure and Properties of Laser-cladded Ni-based Amorphous Composite Coatings. Mater. Sci. Tech-Lond. 2016, 32(12), 1206–1211. DOI: 10.1080/02670836.2015.1114310.
   Web of Science ®Google Scholar
• Kim, D. H.; Zhang, T. F.; Shin, J. H.; Kang, M. C.; Kim, K. H. Microstructure and Mechanical Properties of Cr-Ni-N Coatings Deposited by HiPIMS. Surf. Eng. 2016, 32(4), 314–320. DOI: 10.1179/1743294415Y.0000000063.
   Web of Science ®Google Scholar
• Ushashri, K.; Masanta, M. Hard TiC Coating on AISI304 Steel by Laser Surface Engineering Using Pulsed Nd: YAG Laser. Mater. Manuf. Process. 2015, 30, 730–735. DOI: 10.1080/10426914.2014.973593.
   Web of Science ®Google Scholar