Influence of powder loading on rheology and injection molding of Fe-50Ni feedstocks

References

• Jansson, P. Soft Magnetic Materials for AC Applications. Powd. Metall. 1992, 35(1), 63–66. DOI: 10.1179/pom.1992.35.1.63.
   Web of Science ®Google Scholar
• Abdullahi, A.; Choudhury, I.; Azuddin, M. Process Development and Product Quality of Micro-metal Powder Injection Molding. Mater. Manuf. Processes 2015, 30(11), 1377–1390. DOI: 10.1080/10426914.2015.1025977.
   Web of Science ®Google Scholar
• Ali, M.; Ahmad, F.; Melor, P. S.; Yahya, N.; Altaf, K.; Omar, M. A.; Aslam, M. Binder Removal by a Two-stage Debinding Process for Powder Injection Molding Fe-50Ni Alloy Parts. Mat. Res. Express. 2019, 6(8), 1–12. DOI: 10.1088/2053-1591/ab239b.
   Web of Science ®Google Scholar
• Altaf, K.; Qayyum, J.; Rani, A.; Ahmad, F.; Megat-Yusoff, P.; Baharom, M.; Aziz, A.; Jahanzaib, M. Performance Analysis of Enhanced 3D Printed Polymer Molds for Metal Injection Molding Process. Metals 2018, 8(6), 433. DOI: 10.3390/met8060433.
   Web of Science ®Google Scholar
• Abajo, C.; Hidalgo, J.; Jiménez-Morales, A.; Torralba, J. Optimisation of Eco-friendly Binary Binder System for Powder Injection Moulding. Powd. Metall. 2014, 57(3), 196–203. DOI: 10.1179/1743290114Y.0000000089.
   Web of Science ®Google Scholar
• Ali, M.; Ahmad, F.; Melor, P.; Yasir, M.; Yahya, N.; Aslam, M.; Malik, M. Influence of Powder Loading on Densification and Microstructure of Injection Molded Fe‐50Ni Soft Magnetic Alloys. Mat. Sci. Eng. Technol. 2019, 50(3), 274–282. DOI: 10.1002/mawe.201800217.
   Google Scholar
• Royer, A.; Barrière, T.; Gelin, J. Development and Characterization of a Metal Injection Molding Bio Sourced Inconel 718 Feedstock Based on Polyhydroxyalkanoates. Metals 2016, 6(4), 89. DOI: 10.3390/met6040089.
   Web of Science ®Google Scholar
• Zhang, Y.; Feng, E.; Mo, W.; Lv, Y.; Ma, R.; Ye, S.; Wang, X.; Yu, P. On the Microstructures and Fatigue Behaviors of 316L Stainless Steel Metal Injection Molded with Gas-and Water-Atomized Powders. Metals 2018, 8(11), 893. DOI: 10.3390/met8110893.
   Web of Science ®Google Scholar
• Thomas, P.; Levenfeld, B.; Várez, A.; Cervera, A. Production of Alumina Microparts by Powder Injection Molding. Int. J. Applied Ceramic Technol. 2011, 8(3), 617–626. DOI: 10.1111/j.1744-7402.2009.02471.x.
   Web of Science ®Google Scholar
• Fareh, F.; Demers, V.; Demarquette, N. R.; Turenne, S.; Scalzo, O. Molding Properties of Inconel 718 Feedstocks Used in Low-pressure Powder Injection Molding. Advan. Mat. Sci. Eng. 2016, 2016. DOI: 10.1155/2016/7078045.
   Web of Science ®Google Scholar
• Hausnerová, B.; Marcaníková, L.; Filip, P.; Sáha, P. Optimization of Powder Injection Molding of Feedstock Based on Aluminum Oxide and Multicomponent Water‐soluble Polymer Binder. Polymer Eng. Sci. 2011, 51(7), 1376–1382. DOI: 10.1002/pen.21928.
   Web of Science ®Google Scholar
• Aslam, M.; Ahmad, F.; Yusoff, P. S. M. B. M.; Altaf, K.; Omar, M. A.; Abdul Khalil, H.; Raza, M. R. Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advan. Mat. Sci. Eng. 2016, 2016, 9. DOI: 10.1155/2016/5347150.
   Web of Science ®Google Scholar
• Ni, J.; Han, K.; Yu, M. Development of Hypereutectic AlSi Alloy Powder Injection Molding Feedstocks by Rheological Analysis. Advan. Mat. Sci. Eng. 2018, 2018. DOI: 10.1155/2018/8026545.
   Web of Science ®Google Scholar
• Ma, J.; Qin, M.; Zhang, L.; Tian, L.; Li, R.; Chen, P.; Qu, X. Effect of Ball Milling on the Rheology and Particle Characteristics of Fe–50% Ni Powder Injection Molding Feedstock. J. Alloys Comp. 2014, 590, 41–45. DOI: 10.1016/j.jallcom.2013.12.080.
   Web of Science ®Google Scholar
• Ma, J.; Qin, M.; Zhang, L.; Zhang, R.; Tian, L.; Zhang, X.; Li, X.; Qu, X. Magnetic Properties of Fe–50% Ni Alloy Fabricated by Metal Injection Molding. Mat. Design. 2013, 51, 1018–1022. DOI: 10.1016/j.matdes.2013.05.017.
   Web of Science ®Google Scholar
• Lopes, L. U.; Shoda, J. A.; Silva, A.; Machado, R.; Rodrigues, D.; Wendhausen, P. Study of Soft Magnetic Nickel-iron Based Alloys Processed by Powder Injection Molding. Mat. Sci. Forum. 2008, 591-593, 91–95. DOI: 10.4028/www.scientific.net/MSF.591-593.91.
   Google Scholar
• Bohua, D.; Xuanhui, Q.; Mingli, Q.; Shibo, G. Powder Injection Molding of Fe-Ni Soft Magnetic Alloys. Rare Met. 2006, 25(6), 440–444. DOI: 10.1016/S1001-0521(07)60121-1.
   Google Scholar
• Yu, P.; Li, Q.; Fuh, J.; Li, T.; Ho, P. Micro Injection Molding of Micro Gear Using Nano-sized Zirconia Powder. Microsystem Technol. 2009, 15(3), 401–406. DOI: 10.1007/s00542-008-0673-5.
   Web of Science ®Google Scholar
• Demers, V.; Turenne, S.; Scalzo, O. Impact of Binders on Viscosity of Low-pressure Powder Injection Molded Inconel 718 Superalloy. J. Mater. Sci. 2015, 50(7), 2893–2902. DOI: 10.1007/s10853-015-8853-z.
   Web of Science ®Google Scholar
• Park, S.-J.; Wu, Y.; Heaney, D. F.; Zou, X.; Gai, G.; German, R. M. Rheological and Thermal Debinding Behaviors in Titanium Powder Injection Molding. Metall. Mat. Trans. A. 2009, 40(1), 215–222. DOI: 10.1007/s11661-008-9690-3.
   Google Scholar
• Ahmad, F.; Muhsan, A. S.; Raza, M. R. Rheological Behavior of Carbon Nanotubes/copper Feedstocks for Metal Injection Molding. Adv. Mat. Res. 2012, 408, 5335–5340. DOI: 10.4028/www.scientific.net/AMR.403-408.5335.
   Google Scholar