Drilling characteristics of carbon/epoxy and carbon/polyimide composites

References

• Che, D.; Saxena, I.; Han, P.; Guo, P.; Ehmann, K. F. Machining of Carbon Fiber Reinforced Plastics/Polymers: A Literature Review. J. Manuf. Sci. Eng.-Trans. ASME 2014, 136, 034001. DOI: 10.1115/1.4026526.
   Web of Science ®Google Scholar
• Xu, J.; Li, C.; Mi, S.; An, Q.; Chen, M. Study of Drilling-Induced Defects for CFRP Composites Using New Criteria. Compos. Struct. 2018, 201, 1076–1087. DOI: 10.1016/j.compstruct.2018.06.051.
   Web of Science ®Google Scholar
• Ahmad, F.; Manral, A.; Bajpai, P. K. Machining of Thermoplastic Composites. In Processing of Green Composites; Rakesh, P. K., Singh, I., Eds.; Springer: Singapore, 2019; pp 107–123. DOI: 10.1007/978-981-13-6019-0_8.
   Google Scholar
• Babu, J.; Sunny, T.; Paul, N. A.; Mohan, K. P.; Philip, J.; Davim, J. P. Assessment of Delamination in Composite Materials: A Review. Proc. Inst. Mech. Eng. Pt. B-J. Eng. Manuf. 2016, 230, 1990–2003. DOI: 10.1177/0954405415619343.
   Web of Science ®Google Scholar
• Bajpai, P. K.; Singh, I. Drilling Behavior of Sisal Fiber-Reinforced Polypropylene Composite Laminates. J. Reinf. Plast. Compos. 2013, 32, 1569–1576. DOI: 10.1177/0731684413492866.
   Web of Science ®Google Scholar
• Xu, J.; An, Q.; Chen, M. An Experimental Investigation on Cutting-Induced Damage When Drilling High-Strength T800S/250F Carbon Fiber-Reinforced Polymer. Proc. Inst. Mech. Eng. Pt. B - J. Eng. Manuf. 2017, 231, 1931–1940. DOI: 10.1177/0954405415619348.
   Web of Science ®Google Scholar
• Durante, M.; Boccarusso, L.; De Fazio, D.; Langella, A. Circular Cutting Strategy for Drilling of Carbon Fiber-Reinforced Plastics (CFRPs). Mater. Manuf. Process. 2019, 34, 554–566. DOI: 10.1080/10426914.2019.1566615.
   Web of Science ®Google Scholar
• Samuel Raj, D.; Karunamoorthy, L. Performance of Cryogenically Treated WC Drill Using Tool Wear Measurements on the Cutting Edge and Hole Surface Topography When Drilling CFRP. Int. J. Refract. Met. Hard Mater. 2019, 78, 32–44. DOI: 10.1016/j.ijrmhm.2018.08.011.
   Web of Science ®Google Scholar
• Xu, J.; Li, C.; Chen, M.; El Mansori, M.; Ren, F. An Investigation of Drilling High-Strength CFRP Composites Using Specialized Drills. Int. J. Adv. Manuf. Technol. 2019, 103, 3425–3442. DOI: 10.1007/s00170-019-03753-8.
   Web of Science ®Google Scholar
• Xu, J.; Li, C.; El Mansori, M.; Liu, G.; Chen, M. Study on the Frictional Heat at Tool-Work Interface When Drilling CFRP Composites. Procedia Manuf. 2018, 26, 415–423. DOI: 10.1016/j.promfg.2018.07.049.
   Google Scholar
• Xu, J.; An, Q.; Cai, X.; Chen, M. Drilling Machinability Evaluation on New Developed High-Strength T800S/250F CFRP Laminates. Int. J. Precis. Eng. Manuf. 2013, 14, 1687–1696. DOI: 10.1007/s12541-013-0252-2.
   Web of Science ®Google Scholar
• Geier, N.; Szalay, T.; Takács, M. Analysis of Thrust Force and Characteristics of Uncut Fibres at Non-Conventional Oriented Drilling of Unidirectional Carbon Fibre-Reinforced Plastic (UD-CFRP) Composite Laminates. Int. J. Adv. Manuf. Technol. 2019, 100, 3139–3154. DOI: 10.1007/s00170-018-2895-8.
   Web of Science ®Google Scholar
• Turki, Y.; Habak, M.; Velasco, R.; Vantomme, P. Highlighting Cutting Mechanisms Encountered in Carbon/Epoxy Composite Drilling Using Orthogonal Cutting. Int. J. Adv. Manuf. Technol. 2017, 92, 685–697. DOI: 10.1007/s00170-017-0153-0.
   Web of Science ®Google Scholar
• Kumar, D.; Singh, K. Investigation of Delamination and Surface Quality of Machined Holes in Drilling of Multiwalled Carbon Nanotube Doped Epoxy/Carbon Fiber Reinforced Polymer Nanocomposite. Proc. Inst. Mech. Eng. Pt. L-J. Mater. Des. Appl. 2019, 233, 647–663. DOI: 10.1177/1464420717692369.
   Google Scholar
• Raj, D. S.; Karunamoorthy, L. Study of the Effect of Tool Wear on Hole Quality in Drilling CFRP to Select a Suitable Drill for Multi-Criteria Hole Quality. Mater. Manuf. Process. 2016, 31, 587–592. DOI: 10.1080/10426914.2015.1004713.
   Web of Science ®Google Scholar
• Sheikh-Ahmad, J.; Urban, N.; Cheraghi, H. Machining Damage in Edge Trimming of CFRP. Mater. Manuf. Process. 2012, 27, 802–808. DOI: 10.1080/10426914.2011.648253.
   Web of Science ®Google Scholar
• Wang, B.; Gao, H.; Wen, Q.; Maoqing, W.; Zhang, S. Influence of Cutting Heat on Quality of Drilling of Carbon/Epoxy Composites. Mater. Manuf. Process. 2012, 27, 968–972. DOI: 10.1080/10426914.2011.610079.
   Web of Science ®Google Scholar
• Yan, X.; Reiner, J.; Bacca, M.; Altintas, Y.; Vaziri, R. A Study of Energy Dissipating Mechanisms in Orthogonal Cutting of UD-CFRP Composites. Compos. Struct. 2019, 220, 460–472. DOI: 10.1016/j.compstruct.2019.03.090.
   Google Scholar
• Sun, D.; Han, F.; Ying, W. Numerical Simulation of Water Jet–Guided Laser Cutting of Carbon Fiber–Reinforced Plastics. Proc. Inst. Mech. Eng. Pt. B-J. Eng. Manuf. 2019, 233, 2023–2032. DOI: 10.1177/0954405418809776.
   Web of Science ®Google Scholar
• Feito, N.; Díaz-Álvarez, J.; López-Puente, J.; Miguelez, M. Experimental and Numerical Analysis of Step Drill Bit Performance When Drilling Woven CFRPs. Compos. Struct. 2018, 184, 1147–1155. DOI: 10.1016/j.compstruct.2017.10.061.
   Web of Science ®Google Scholar
• Shearwood, C.; Harradine, M. A.; Birch, T. S.; Stevens, J. C. Applications of Polyimide Membranes to Mems Technology. Microelectron. Eng. 1996, 30, 547–550. DOI: 10.1016/0167-9317(95)00306-1.
   Web of Science ®Google Scholar
• Pratap, B.; Arnold, C. B.; Pique, A. Depth and Surface Roughness Control on Laser Micromachined Polyimide for Direct-Write Deposition. Proceedings of Micromachining and Microfabrication Process Technology VIII, San Jose, CA, United States, 2003, p. 217–225. DOI: 10.1117/12.472801
   Google Scholar
• Antanavičiūtė, I.; Šimatonis, L.; Ulčinas, O.; Gadeikytė, A.; Abakevičienė, B.; Tamulevičius, S.; Mikalayeva, V.; Skeberdis, V. A.; Stankevičius, E.; Tamulevičius, T. Femtosecond Laser Micro-Machined Polyimide Films for Cell Scaffold Applications. J. Tissue Eng. Regener. Med. 2018, 12, e760–e773. DOI: 10.1002/term.2376.
   PubMed Web of Science ®Google Scholar
• Ji, M.; Xu, J.; Chen, M.; El Mansori, M. Effects of Different Cooling Methods on the Specific Energy Consumption When Drilling CFRP/Ti6Al4V Stacks. Procedia Manuf. 2020, 43, 95–102. DOI: 10.1016/j.promfg.2020.02.118.
   Google Scholar
• Shunmugesh, K.; Panneerselvam, K. Optimization of Machining Process Parameters in Drilling of CFRP Using Multi-Objective Taguchi Technique, Topsis and Rsa Techniques. Polym. Polym. Compos. 2017, 25, 185–192. DOI: 10.1177/096739111702500301.
   Web of Science ®Google Scholar
• Ameur, M. F.; Habak, M.; Kenane, M.; Aouici, H.; Cheikh, M. Machinability Analysis of Dry Drilling of Carbon/Epoxy Composites: Cases of Exit Delamination and Cylindricity Error. Int. J. Adv. Manuf. Technol. 2017, 88, 2557–2571. DOI: 10.1007/s00170-016-8967-8.
   Web of Science ®Google Scholar