Cold spray process for the production of AlSi10Mg coatings on glass fibers reinforced polymers

References

• Kupfer, H.; Wolf, G. K. Plasma and Ion Beam Assisted Metallization of Polymers and Their Application. Nucl. Instruments Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms. 2000, 166-167, 722–731. DOI: 10.1016/S0168-583X(99)01192-1.
   Web of Science ®Google Scholar
• Xu, L. J.; Shi, X. Y.; Chai, M. Y.; Ji, J.; Xu, Z. K.; Wan, L. S. Surface Metallization of Porous Polymer Materials for Multifunctional Applications. 2020. Langmuir. DOI: 10.1021/acs.langmuir.9b03701.
   Google Scholar
• Lomonaco, P.; Weiller, S.; Feki, I.; Debray, A.; Delloro, F.; Jeandin, M.; Favini, B.; Rossignol, C. Cold Spray Technology to Promote Conductivity of Short Carbon Fiber Reinforced Polyether-ether-ketone (PEEK). Key Eng. Mater. 2019, 813, 459–464. DOI: 10.4028/www.scientific.net/KEM.813.459.
   Google Scholar
• Archambault, G.; Jodoin, B.; Gaydos, S.; Yandouzi, M. Metallization of Carbon Fiber Reinforced Polymer Composite by Cold Spray and Lay-up Molding Processes. Surf. Coatings Technol. 2016, 300, 78–86. DOI: 10.1016/j.surfcoat.2016.05.008.
   Web of Science ®Google Scholar
• Ye, Y.; Xu, Y.; Liu, Y.; Tu, W.; Liao, J. Progress of Surface Modification for Surface Metallization of Polymers. Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Mater. Sci. Eng. 2013, 29(11), 187-190
   Google Scholar
• Affi, J.; Okazaki, H.; Yamada, M.; Fukumoto, M. Fabrication of Aluminum Coating onto CFRP Substrate by Cold Spray. Mater. Trans. 2011, 52(9), 1759–1763. DOI: 10.2320/matertrans.T-M2011807.
   Web of Science ®Google Scholar
• Voyer, J.; Schulz, P.; Schreiber, M. Electrically Conductive Flame Sprayed Aluminum Coatings on Textile Substrates. J. Thermal Spray Technol. 2008, 17, 818–823. DOI: 10.1007/s11666-008-9228-7.
   Web of Science ®Google Scholar
• Viscusi, A.; Astarita, A.; Della, G. R.; Rubino, F. A Perspective Review on the Bonding Mechanisms in Cold Gas Dynamic Spray. Surf. Eng. 2019, 35(9), 743–771. DOI: 10.1080/02670844.2018.1551768.
   Web of Science ®Google Scholar
• Koivuluoto, H.; Vuoristo, P. Structure and Corrosion Properties of Cold Sprayed Coatings: A Review. Surf. Eng. 2014, 30(6), 404–413. DOI: 10.1179/1743294413Y.0000000201.
   Web of Science ®Google Scholar
• Gärtner, F.;. Advances in Cold Spraying. Surf. Eng. 2006, 22(3), 161–163. DOI: 10.1179/174329406X108906.
   Web of Science ®Google Scholar
• Jeandin, M.;. Cold Spray under the Banner of Thermal Spray in the Whirlwind of Additive Manufacturing. Surf. Eng. 2018, 1–6. DOI: 10.1080/02670844.2017.1300429.
   Web of Science ®Google Scholar
• Lupoi, R.; O’Neill, W. Deposition of Metallic Coatings on Polymer Surfaces Using Cold Spray. Surf. Coatings Technol. 2010, 205(7), 2167–2173. DOI: 10.1016/j.surfcoat.2010.08.128.
   Web of Science ®Google Scholar
• Ganesan, A.; Affi, J.; Yamada, M.; Fukumoto, M. Bonding Behavior Studies of Cold Sprayed Copper Coating on the PVC Polymer Substrate. Surf. Coatings Technol. 2012, 207, 262–269. DOI: 10.1016/j.surfcoat.2012.06.086.
   Web of Science ®Google Scholar
• Rokni, M. R.; Feng, P.; Widener, C. A.; Nutt, S. R. Depositing Al-Based Metallic Coatings onto Polymer Substrates by Cold Spray. J. Therm. Spray. Technol. 2019, 28(7), 1699–1708. DOI: 10.1007/s11666-019-00911-y.
   Web of Science ®Google Scholar
• Huang, G.; Wang, H.; Li, X.; Xing, L.; Zhou, J. Deposition Efficiency of Low Pressure Cold Sprayed Aluminum Coating. Mater. Manuf. Process. 2018, 33(10), 1100–1106. DOI: 10.1080/10426914.2017.1415443.
   Web of Science ®Google Scholar
• Małachowska, A.; Winnicki, M.; Konat, Ł.; Piwowarczyk, T.; Pawłowski, L.; Ambroziak, A.; Stachowicz, M. Possibility of Spraying of Copper Coatings on Polyamide 6 with Low Pressure Cold Spray Method. Surf. Coatings Technol. 2017, 318, 82–89. DOI: 10.1016/j.surfcoat.2017.02.001.
   Web of Science ®Google Scholar
• Che, H.; Vo, P.; Yue, S. Metallization of Carbon Fibre Reinforced Polymers by Cold Spray. Surf. Coatings Technol. 2017. DOI: 10.1016/j.surfcoat.2017.01.083.
   Web of Science ®Google Scholar
• Ganesan, A.; Yamada, M.; Fukumoto, M. Cold Spray Coating Deposition Mechanism on the Thermoplastic and Thermosetting Polymer Substrates. J. Thermal Spray Technol. 2013, 22(8), 1275–1282. DOI: 10.1007/s11666-013-9984-x.
   Web of Science ®Google Scholar
• Chen, C.; Xie, X.; Xie, Y.; Yan, X.; Huang, C.; Deng, S.; Ren, Z.; Liao, H. Metallization of Polyether Ether Ketone (PEEK) by Copper Coating via Cold Spray. Surf. Coatings Technol. 2018. DOI: 10.1016/j.surfcoat.2018.02.087.
   Web of Science ®Google Scholar
• Assadi, H.; Kreye, H.; Gärtner, F.; Klassen, T. Cold Spraying – A Materials Perspective. Acta Mater. 2016, 116, 382–407. DOI: 10.1016/j.actamat.2016.06.034.
   Web of Science ®Google Scholar
• Che, H.; Chu, X.; Vo, P.; Yue, S. Cold Spray of Mixed Metal Powders on Carbon Fibre Reinforced Polymers. Surf. Coatings Technol. 2017. DOI: 10.1016/j.surfcoat.2017.09.052.
   Web of Science ®Google Scholar
• Sturgeon, A.; Dunn, B.; Celotto, S.; O’Neill, B. Cold Sprayed Coatings for Polymer Composite Substrates. Eur. Space Agency ESA SP. 2006, 616, P76
   Google Scholar
• Bortolussi, V.; Borit, F.; Chesnaud, A.; Jeandin, M.; Faessel, M.; Figliuzzi, B.; Willot, F.; Roche, K.; Surdon, G. Cold Spray of Metal-polymer Composite Coatings onto Carbon Fiber-Reinforced Polymer (CFRP). Proceedings of the International Thermal Spray Conference. 2016, 26-26.
   Google Scholar
• Rubino, F.; Tucci, F.; Esperto, V.; Perna, A. S.; Astarita, A.; Carlone, P.; Squillace, A. Metallization of Fiber Reinforced Composite by Surface Functionalization and Cold Spray Deposition. Procedia Manuf. 2020, 47, 1084–1088. DOI: 10.1016/j.promfg.2020.04.353.
   Google Scholar
• Gillet, V.; Aubignat, E.; Costil, S.; Courant, B.; Langlade, C.; Casari, P.; Knapp, W.; Planche, M. P. Development of Low Pressure Cold Sprayed Copper Coatings on Carbon Fiber Reinforced Polymer (CFRP). Surf. Coatings Technol. 2019, 364, 306–316. DOI: 10.1016/j.surfcoat.2019.01.011.
   Web of Science ®Google Scholar
• Liberati, A. C.; Che, H.; Vo, P.; Yue, S. Observation of an Indirect Deposition Effect while Cold Spraying Sn-Al Mixed Powders onto Carbon Fiber Reinforced Polymers. J. Therm. Spray. Technol. 2020, 29(1–2), 134–146. DOI: 10.1007/s11666-019-00967-w.
   Web of Science ®Google Scholar
• Yin, S.; Liao, H. L.; Wang, X. F. Euler Based Finite Element Analysis on High Velocity Impact Behaviour in Cold Spraying. Surf. Eng. 2014, 30(5), 309–315. DOI: 10.1179/1743294413Y.0000000240.
   Web of Science ®Google Scholar
• Wang, F.; Zhao, M. Simulation of Particle Deposition Behavior in Cold-Sprayed Mg Anticorrosion Coating. Mater. Manuf. Process. 2016. DOI: 10.1080/10426914.2014.952042.
   Web of Science ®Google Scholar
• Hansen, B.; Borsoi, C.; Dahlem Júnior, M. A.; Catto, A. L. Thermal and Thermo-mechanical Properties of Polypropylene Composites Using Yerba Mate Residues as Reinforcing Filler. Ind. Crop Prod. 2019, 140, 111696. DOI: 10.1016/j.indcrop.2019.111696.
   Web of Science ®Google Scholar
• Cevahir, A. Glass Fibers. Fiber Technol. Fiber-Reinforced Comp. 2017, 99-121. DOI:10.1016/b978-0-08-101871-2.00005-9.
   Google Scholar
• Giraud, D.; Borit, F.; Guipont, V.; Jeandin, M.; Malhaire, J. M. Metallization of a Polymer Using Cold Spray: Application to Aluminum Coating of Polyamide 66. Proceedings of the International Thermal Spray Conference, Houston. 2012.
   Google Scholar
• Li, W. Y.; Li, C. J. Optimization of Spray Conditions in Cold Spraying Based on Numerical Analysis of Particle Velocity. Trans. Nonferrous Met. Soc. China (English Ed). 2004, 14, 43-48.
   Web of Science ®Google Scholar
• Che, H.; Chu, X.; Vo, P.; Yue, S. Metallization of Various Polymers by Cold Spray. J. Therm. Spray. Technol. 2018, 27(1–2), 169–178. DOI: 10.1007/s11666-017-0663-1.
   Web of Science ®Google Scholar
• Małachowska, A.; Winnicki, M.; Stachowicz, M.; Korzeniowski, M. Metallisation of Polycarbonates Using a Low Pressure Cold Spray Method. Surf. Eng. 2018, 34(3), 251–258. DOI: 10.1080/02670844.2016.1277843.
   Web of Science ®Google Scholar
• Vucko, M. J.; King, P. C.; Poole, A. J.; Carl, C.; Jahedi, M. Z.; de Nys, R. Cold Spray Metal Embedment: An Innovative Antifouling Technology. Biofouling. 2012, 28(3), 239–248. DOI: 10.1080/08927014.2012.670849.
   PubMed Web of Science ®Google Scholar
• Viscusi, A.; Perna, A. S.; Astarita, A.; Boccarusso, L.; Caraviello, A.; Carrino, L.; Della Gatta, R.; Durante, M.; Sansone, R. Experimental Study of Cold Sprayed Metallic Coatings on Thermoplastic Matrix Composites. Key Eng. Mater. 2019, 813, 68–73. DOI: 10.4028/www.scientific.net/kem.813.68.
   Google Scholar
• Bielousova, O.; Kocimski, J.; Maev, R. G.; Smurov, I.; Scharff, W.; Leshchynsky, V. Localisation of Deformation in Cold Gas Dynamic Spraying. Surf. Eng. 2016, 32(9), 655–662. DOI: 10.1179/1743294415Y.0000000059.
   Web of Science ®Google Scholar
• Zhou, X. L.; Chen, A. F.; Liu, J. C.; Wu, X. K.; Zhang, J. S. Preparation of Metallic Coatings on Polymer Matrix Composites by Cold Spray. Surf. Coatings Technol. 2011, 206(1), 132–136. DOI: 10.1016/j.surfcoat.2011.07.005.
   Web of Science ®Google Scholar
• Mejlej, V. G.; Falkenberg, P.; Türck, E.; Vietor, T. Optimization of Variable Stiffness Composites in Automated Fiber Placement Process Using Evolutionary Algorithms. Procedia CIRP. 2017, 66, 79–84. DOI: 10.1016/j.procir.2017.03.302.
   Google Scholar
• Gardon, M.; Latorre, A.; Torrell, M.; Dosta, S.; Fernández, J.; Guilemany, J. M. Cold Gas Spray Titanium Coatings onto a Biocompatible Polymer. Mater. Lett., 2013, 106, 97–99. doi:10.1016/j.matlet.2013.04.115.
   Web of Science ®Google Scholar
• Goyal, T.; Walia, R. S.; Sidhu, T. S. Effect of Parameters on Coating Density for Cold Spray Process. Mater. Manuf. Process. 2012, 27(2), 193–200. DOI: 10.1080/10426914.2011.566906.
   Web of Science ®Google Scholar
• Goyal, T.; Walia, R. S.; Sidhu, T. S. Study of Coating Thickness of Cold Spray Process Using Taguchi Method. Mater. Manuf. Process. 2012, 27(2), 185–192. DOI: 10.1080/10426914.2011.564249.
   Web of Science ®Google Scholar
• Li, W. Y.; Zhang, C.; Guo, X. P.; Zhang, G.; Liao, H. L.; Li, C. J.; Coddet, C. Effect of Standoff Distance on Coating Deposition Characteristics in Cold Spraying. Mater. Des. 2008. DOI: 10.1016/j.matdes.2007.02.005.
   Web of Science ®Google Scholar
• Bakshi, S. R.; Laha, T.; Balani, K.; Agarwal, A.; Karthikeyan, J. Effect of Carrier Gas on Mechanical Properties and Fracture Behaviour of Cold Sprayed Aluminium Coatings. Surf. Eng. 2007, 23(1), 18–22. DOI: 10.1179/174329407X161618.
   Web of Science ®Google Scholar
• Raoelison, R. N.; Aubignat, E.; Planche, M. P.; Costil, S.; Langlade, C.; Liao, H. Low Pressure Cold Spraying under 6 Bar Pressure Deposition: Exploration of High Deposition Efficiency Solutions Using a Mathematical Modelling. Surf. Coatings Technol. 2016, 302, 47–55. DOI: 10.1016/j.surfcoat.2016.05.068.
   Web of Science ®Google Scholar
• Li, W. Y.; Liao, H.; Li, C. J.; Bang, H. S.; Coddet, C. Numerical Simulation of Deformation Behavior of Al Particles Impacting on Al Substrate and Effect of Surface Oxide Films on Interfacial Bonding in Cold Spraying. Appl. Surf. Sci. 2007. DOI: 10.1016/j.apsusc.2006.11.020.
   Web of Science ®Google Scholar
• Kang, K.; Yoon, S.; Ji, Y.; Lee, C. Oxidation Dependency of Critical Velocity for Aluminum Feedstock Deposition in Kinetic Spraying Process. Mater. Sci. Eng. A. 2008, 486(1–2), 300–307. DOI: 10.1016/j.msea.2007.09.010.
   Web of Science ®Google Scholar
• Li, C. J.; Li, W. Y.; Liao, H. Examination of the Critical Velocity for Deposition of Particles in Cold Spraying. J. Therm. Spray. Technol. 2006. DOI: 10.1361/105996306X108093.
   Web of Science ®Google Scholar