Experimental investigations of electromagnetic punching process in CFRP laminate

References

• Durante, M.; Boccarusso, L.; De Fazio, D.; Langella, A. Circular Cutting Strategy for Drilling of Carbon Fiber-reinforced Plastics (Cfrps). Mater. Maunf. Process. 2019, 34, 554–566. DOI: 10.1080/10426914.2019.1566615.
   Google Scholar
• Jia, Z.; Li, T.; Chiang, F.-P.; Wang, L. An Experimental Investigation of the Temperature Effect on the Mechanics of Carbon Fiber Reinforced Polymer Composites. Compos. Sci. Technol. 2018, 154, 53–63. DOI: 10.1016/j.compscitech.2017.11.015.
   Web of Science ®Google Scholar
• Anand, R. S.; Patra, K. Cutting Force and Hole Quality Analysis in Micro-drilling of CFRP. Mater. Maunf. Process. 2017, 33, 1369–1377. DOI: 10.1080/10426914.2017.1401715.
   Google Scholar
• Geier, N.; Szalay, T.; Takács, M. Analysis of Thrust Force and Characteristics of Uncut Fibres at Non-conventional Oriented Drilling of Unidirectional Carbon Fibre-reinforced Plastic (UD-CFRP) Composite Laminates. Int. J. Adv. Manuf. Technol. 2018, 100, 3139–3154. DOI: 10.1007/s00170-018-2895-8.
   Web of Science ®Google Scholar
• Klocke, F.; Shirobokov, A.; Kerchnawe, S.; Wahl, M.; Mannens, R.; Feuerhack, A.; Mattfeld, P. Experimental Investigation of the Hole Accuracy, Delamination, and Cutting Force in Piercing of Carbon Fiber Reinforced Plastics. Procedia CIRP. 2017, 66, 215–220. DOI: 10.1016/j.procir.2017.03.297.
   Google Scholar
• Gaugel, S.; Sripathy, P.; Haeger, A.; Meinhard, D.; Bernthaler, T.; Lissek, F.; Kaufeld, M.; Knoblauch, V.; Schneider, G. A Comparative Study on Tool Wear and Laminate Damage in Drilling of Carbon-fiber Reinforced Polymers (CFRP). Compos. Struct. 2016, 155, 173–183. DOI: 10.1016/j.compstruct.2016.08.004.
   Web of Science ®Google Scholar
• Abish, J.; Samal, P.; Narenther, M. S.; Kannan, C.; Balan, A. S. S. Assessment of Drilling-induced Damage in CFRP under Chilled Air Environment. Mater. Maunf. Process. 2017, 33, 1361–1368. DOI: 10.1080/10426914.2017.1415452.
   Google Scholar
• Xu, J.; Li, C.; Chen, M.; Ren, F. A Comparison between Vibration Assisted and Conventional Drilling of CFRP/Ti6Al4V Stacks. Mater. Maunf. Process. 2019, 34, 1182–1193. DOI: 10.1080/10426914.2019.1615085.
   Google Scholar
• Swan, S.; Bin Abdullah, M. S.; Kim, D.; Nguyen, D.; Kwon, P. Tool Wear of Advanced Coated Tools in Drilling of CFRP. J. Manuf. Sci. E.-T. ASME. 2018, 140. DOI: 10.1115/1.4040916.
   PubMed Web of Science ®Google Scholar
• Kim, B.; Iida, R.; Doan, D. H.; Fushinobu, K. Mechanism of Nanosecond Laser Drilling Process of 4H-SiC for through Substrate Vias. Appl. Phys. A-Mater. 2017, 123, 392. DOI: 10.1007/s00339-017-0986-2.
   Google Scholar
• Yin, C. P.; Wu, Z. P.; Dong, Y. W.; You, Y. C.; Liao, T. Femtosecond Laser Helical Drilling of Nickel-base Single-crystal Super-alloy: Effect of Machining Parameters on Geometrical Characteristics of Micro-holes. Adv. Prod. Eng. Manag. 2019, 14, 407–420. DOI: 10.14743/apem2019.4.337.
   Web of Science ®Google Scholar
• Shen, H.; Jiang, J.; Feng, D.; Xing, C.; Zhao, X.; Xiao, P. Environmental Effect on the Crack Behavior of Yttria-Stabilized Zirconia during Laser Drilling. J. Manuf. Sci. E.-T. ASME. 2019, 141. DOI: 10.1115/1.4043022.
   Web of Science ®Google Scholar
• Wang, H.; Lin, H.; Wang, C.; Zheng, L.; Hu, X. Laser Drilling of Structural ceramics—A Review. J. Eur. Ceram. Soc. 2017, 37, 1157–1173. DOI: 10.1016/j.jeurceramsoc.2016.10.031.
   Web of Science ®Google Scholar
• Voisey, K. T.; Fouquet, S.; Roy, D.; Clyne, T. W. Fibre Swelling during Laser Drilling of Carbon Fibre Composites. Opt. Laser. Eng. 2006, 44, 1185–1197. DOI: 10.1016/j.optlaseng.2005.10.008.
   Web of Science ®Google Scholar
• Thiébaud, R.; Drezet, J.-M.; Lebet, J.-P. Experimental and Numerical Characterisation of Heat Flow during Flame Cutting of Thick Steel Plates. J. Mater. Process. Technol. 2014, 214, 304–310. DOI: 10.1016/j.jmatprotec.2013.09.016.
   Web of Science ®Google Scholar
• Bae, K.-Y.; Yang, Y.-S.; Yi, M.-S.; Park, C.-W. Numerical Analysis of Heat Flow in Oxy-ethylene Flame Cutting of Steel Plate. P. I. Mech. Eng. B-J. Eng. 2016, 232, 742–751. DOI: 10.1177/0954405416654183.
   Web of Science ®Google Scholar
• Masoudi, S.; Mirabdolahi, M.; Dayyani, M.; Jafarian, F.; Vafadar, A.; Dorali, M. R. Development of an Intelligent Model to Optimize Heat-affected Zone, Kerf, and Roughness in 309 Stainless Steel Plasma Cutting by Using Experimental Results. Mater. Maunf. Process. 2018, 34, 345–356. DOI: 10.1080/10426914.2018.1532579.
   Google Scholar
• Sowmiya, K.; Ramachandran, K.; Abiyazhini, R.; Barath, V. R. Numerical Evaluation on the Performance of CO₂ Plasma in Material Processing Applications. Mater. Maunf. Process. 2019, 34, 1775–1782. DOI: 10.1080/10426914.2019.1683575.
   Google Scholar
• Lambiase, F.; Durante, M. Mechanical Behavior of Punched Holes Produced on Thin Glass Fiber Reinforced Plastic Laminates. Compos. Struct. 2017, 173, 25–34. DOI: 10.1016/j.compstruct.2017.04.003.
   Web of Science ®Google Scholar
• Jiang, H.; Li, G.; Zhang, X.; Cui, J. Fatigue and Failure Mechanism in Carbon Fiber Reinforced Plastics/aluminum Alloy Single Lap Joint Produced by Electromagnetic Riveting Technique. Compos. Sci. Technol. 2017, 152, 1–10. DOI: 10.1016/j.compscitech.2017.09.004.
   Web of Science ®Google Scholar
• Tang, Z.; Du, H.; Lang, L.; Jiang, S.; Chen, J.; Zhang, J. Experimental Investigation into the Electropulsing Assisted Punching Process of 2024T4 Aluminum Alloy Sheet. J. Mater. Process. Technol. 2018, 253, 86–98. DOI: 10.1016/j.jmatprotec.2017.11.011.
   Web of Science ®Google Scholar
• Ho, Y.-C.; Yanagimoto, J. Effect of Unidirectional Prepreg Size on Punching of Pseudo-ductile CFRP Laminates and CFRP/metal Hybrid Composites. Compos. Struct. 2018, 186, 246–255. DOI: 10.1016/j.compstruct.2017.11.042.
   Web of Science ®Google Scholar
• Abrão, A. M.; Rubio, J. C. C.; Faria, P. E.; Davim, J. P. The Effect of Cutting Tool Geometry on Thrust Force and Delamination When Drilling Glass Fibre Reinforced Plastic Composite. Mater. Des. 2008, 29, 508–513. DOI: 10.1016/j.matdes.2007.01.016.
   Web of Science ®Google Scholar
• Sardiñas, R. Q.; Reis, P.; Davim, J. P. Multi-objective Optimization of Cutting Parameters for Drilling Laminate Composite Materials by Using Genetic Algorithms. Compos. Sci. Technol. 2006, 66, 3083–3088. DOI: 10.1016/j.compscitech.2006.05.003.
   Web of Science ®Google Scholar
• Deng, H.; Mao, Y.; Li, G.; Cui, J. A Study of Electromagnetic Free Forming in AA5052 Using Digital Image Correlation Method and FE Analysis. J. Manuf. Process. 2019, 37, 595–605. DOI: 10.1016/j.jmapro.2018.12.033.
   Web of Science ®Google Scholar
• Geier, N.; Szalay, T. Optimisation of Process Parameters for the Orbital and Conventional Drilling of Uni-directional Carbon Fibre-reinforced Polymers (UD-CFRP). Measurement. 2017, 110, 319–334. DOI: 10.1016/j.measurement.2017.07.007.
   Web of Science ®Google Scholar
• Kumar, S. S.; Ravisankar, B. An Evaluation of Quality of Joints of Two Dissimilar Metals by Diffusion Bonding Using Ultrasonic C Scan. Mater. Maunf. Process. 2016, 31, 2084–2090. DOI: 10.1080/10426914.2015.1127957.
   Google Scholar