References
- Mallick, P. K.;. Fiber-reinforced Composites: Materials, Manufacturing, and Design. third. CRC press; 2007.
- Gutowski, T.;. Advanced Composites Manufacturing; Jhon Wiley & Sons, Inc.: New York, NY, 1997.
- Soutis, C.;. Fibre Reinforced Composites in Aircraft Construction. Prog. Aerosp. Sci. 2005, 41, 143–151. DOI: https://doi.org/10.1016/j.paerosci.2005.02.004.
- Yao, S. S.; Jin, F. L.; Rhee, K. Y.; Hui, D.; Park, S. J. Recent Advances in Carbon-fiber-reinforced Thermoplastic Composites: A Review. Compos. Part B. Eng. 2018, 142, 241–250. DOI: https://doi.org/10.1016/j.compositesb.2017.12.007.
- Coleman, J. N.; Khan, U.; Blau, W. J.; Gun’ko, Y. K. Small but Strong: A Review of the Mechanical Properties of Carbon Nanotube-polymer Composites. Carbon. N.Y. 2006, 44, 1624–1652. DOI: https://doi.org/10.1016/j.carbon.2006.02.038.
- Karbhari, V. M.; Chin, J. W.; Hunston, D.; Benmokrane, B.; Juska, T.; Morgan, R, Lesko JJ, Sorathia U, Reynaud AD. Durability Gap Analysis for Fiber-Reinforced Polymer Composites in Civil Infrastructure. J. Compos. Constr. 2003, 7, 238–247. DOI: https://doi.org/10.1061/(ASCE)1090-0268(2003)7:3(238).
- Maraveas, C.; Miamis, K.; Vrakas, A. A. Fiber-reinforced Polymer-strengthened/reinforced Concrete Structures Exposed to Fire: A Review. Struct. Eng. Int. J. 2012, 22, 500–513. DOI: https://doi.org/10.2749/101686612X13363929517613.
- Keller, T.;. Overview of Fibre-reinforced Polymers in Bridge Construction. Struct. Eng. Int. J. 2002, 12, 66–70. DOI: https://doi.org/10.2749/101686602777965595.
- Kabir, M. H.; Fawzia, S.; Chan, T. H. T.; Gamage, J. C. P. H. Durability Performance of Carbon Fibre-reinforced Polymer Strengthened Circular Hollow Steel Members under Cold Weather. Aust. J. Struct. Eng. 2014, 15, 377–392. DOI: https://doi.org/10.7158/S13-042.2014.15.4.
- Rao, Y. S.; Mohan, N. S.; Shetty, N.; Shivamurthy, B. Drilling and Structural Property Study of Multi-layered Fiber and Fabric Reinforced Polymer Composite - a Review. Mater. Manuf. Process. 2019, 34, 1549–1579. DOI: https://doi.org/10.1080/10426914.2019.1686522.
- Nelyub, V.; Tarasov, V. Ion-beam Processing of Metallized Carbon Fiber-reinforced Plastics. Mater. Manuf. Process. 2020, 35, 172–178. DOI: https://doi.org/10.1080/10426914.2020.1711926.
- Mazumdar, S. K.; Composites Manufacturing - Materials, Product, and Process Engineering. 2002.
- Vieira, D. R.; Vieira, R. K.; Chang Chain, M. Strategy and Management for the Recycling of Carbon Fiber-reinforced Polymers (Cfrps) in the Aircraft Industry: A Critical Review. Int. J. Sustain. Dev. World Ecol. 2017, 24, 214–223. DOI: https://doi.org/10.1080/13504509.2016.1204371.
- Joseph, J.; Munda, P. R.; Kumar, M.; Sidpara, A. M.; Paul, J. Sustainable Conducting Polymer Composites: Study of Mechanical and Tribological Properties of Natural Fiber Reinforced PVA Composites with Carbon Nanofillers. Polym. Technol. Mater. 2020, 59, 1088–1099. DOI: https://doi.org/10.1080/25740881.2020.1719144.
- Khalifa, M.; Anandhan, S.; Wuzella, G.; Lammer, H.; Mahendran, A. R. Thermoplastic Polyurethane Composites Reinforced with Renewable and Sustainable Fillers–a Review. Polym. Technol. Mater. 2020, 00, 1–19. DOI: https://doi.org/10.1080/25740881.2020.1768544.
- Hou, W.; Gao, Y.; Wang, J.; Blackwood, D. J.; Teo, S. Recent Advances and Future Perspectives for Graphene Oxide Reinforced Epoxy Resins. Mater. Today. Commun. 2020, 23, 100883. DOI: https://doi.org/10.1016/j.mtcomm.2019.100883.
- Liu, J.; Sun, L.; Xu, W.; Wang, Q.; Yu, S.; Sun, J. Current Advances and Future Perspectives of 3D Printing Natural-derived Biopolymers. Carbohydr. Polym. 2019, 207, 297–316. DOI: https://doi.org/10.1016/j.carbpol.2018.11.077.
- Bussetta, P.; Correia, N. Numerical Forming of Continuous Fibre Reinforced Composite Material: A Review. Compos. Part A. Appl. Sci. Manuf. 2018, 113, 12–31. DOI: https://doi.org/10.1016/j.compositesa.2018.07.010.
- González, C.; Vilatela, J. J.; Molina-Aldareguía, J. M.; Lopes, C. S.; LLorca, J. Structural Composites for Multifunctional Applications: Current Challenges and Future Trends. Prog. Mater. Sci. 2017, 89, 194–251. DOI: https://doi.org/10.1016/j.pmatsci.2017.04.005.
- Raji, M.; Abdellaoui, H.; Essabir, H.; Kakou, C. A.; Bouhfid, R.; El Kacem Qaiss, A. Prediction of the cyclic durability of woven-hybrid composites. 2018. DOI: https://doi.org/10.1016/B978-0-08-102290-0.00003-9.
- Davidovits, J.; Geopolymer chemistry and applications. 2011.
- Elkington, M.; Bloom, D.; Ward, C.; Chatzimichali, A.; Potter, K. Hand Layup: Understanding the Manual Process. Adv. Manuf. Polym. Compos. Sci. 2015, 1, 138–151. DOI: https://doi.org/10.1080/20550340.2015.1114801.
- Elkington, M.; Ward, C.; Chatzimichali, A.; Potter, K. Preshearing: The Evolution of Manual Layup. 16th Eur. Conf. Compos. Mater. ECCM 2014, Seville, Spain; 2014, p. 22–6.
- Bhatt, A. T.; Gohil, P. P.; Chaudhary, V. Primary Manufacturing Processes for Fiber Reinforced Composites: History, Development & Future Research Trends. IOP Conf. Ser. Mater. Sci. Eng. 2018, 330. DOI: https://doi.org/10.1088/1757-899X/330/1/012107.
- Sharma, S. D.; Sowntharya, L.; Kar, K. K. Composite Materials: Processing, Applications, Characterizations. Compos. Mater. 2017, 1–36. DOI: https://doi.org/10.1007/978-3-662-49514-8.
- Park, C. H.; Lee, W. I. Compression Molding in Polymer Matrix Composites. Manuf. Tech. Polym. Matrix Compos. Woodhead Publishing Limited: Cambridge, UK. 2012; 47–94. doi: https://doi.org/10.1533/9780857096258.1.47.
- Tatara, R. A. Compression Molding. Appl. Plast. Eng. Handb. Second. Elsevier Inc.: Amsterdam; 2017; 291–320. DOI: https://doi.org/10.1016/B978-0-323-39040-8/00014-6.
- Prasad, V.; Hunize, C. V. M.; Abhiraj, R. I.; Joseph, M. A.; Sekar, K.; Ali, M. Mechanical Properties of Flax Fiber Reinforced Composites Manufactured Using Hand Layup and Compression Molding—A Comparison; Springer: Singapore, 2019. DOI: https://doi.org/10.1007/978-981-13-6412-9_72.
- Denos, B. R.; Sommer, D. E.; Favaloro, A. J.; Pipes, R. B.; Avery, W. B. Fiber Orientation Measurement from Mesoscale CT Scans of Prepreg Platelet Molded Composites. Compos. Part A. Appl. Sci. Manuf. 2018, 114, 241–249. DOI: https://doi.org/10.1016/j.compositesa.2018.08.024.
- Kim, H. H.; Lee, M. S.; Kang, C. G. The Fabrication of a Hybrid Material Using the Technique of Hot-press Molding. Mater. Manuf. Process. 2013, 28, 892–898. DOI: https://doi.org/10.1080/10426914.2013.811741.
- Evans, A. D.; Qian, C. C.; Turner, T. A.; Harper, L. T.; Warrior, N. A. Flow Characteristics of Carbon Fibre Moulding Compounds. Compos. Part A. Appl. Sci. Manuf. 2016, 90, 1–12. DOI: https://doi.org/10.1016/j.compositesa.2016.06.020.
- Pillai, K. M.;. Modeling the Unsaturated Flow in Liquid Composite Molding Processes: A Review and Some Thoughts. J. Compos. Mater. 2004, 38, 2097–2118. DOI: https://doi.org/10.1177/0021998304045585.
- Johnson, R. J.; Pitchumani, R. Active Control of Reactive Resin Flow in a Vacuum Assisted Resin Transfer Molding (VARTM) Process. J. Compos. Mater. 2008, 42, 1205–1229. DOI: https://doi.org/10.1177/0021998308091264.
- Bodaghi, M.; Lomov, S. V.; Simacek, P.; Correia, N. C.; Advani, S. G. On the Variability of Permeability Induced by Reinforcement Distortions and Dual Scale Flow in Liquid Composite Moulding: A Review. Compos. Part A. Appl. Sci. Manuf. 2019, 120, 188–210. DOI: https://doi.org/10.1016/j.compositesa.2019.03.004.
- Pantelelis, N.; Nedelec, G.; Amosse, Y.; Toitgans, M. P.; Beigbeder, A.; Harismendy, I, Mezzacasa R, Zhang J, Bistekos E. Industrial Cure Monitoring and Control of the RTM Production of a CFRP Automotive Component. ECCM 2012 - Compos. Venice, Proc. 15th Eur. Conf. Compos. Mater. 2012, p. 24–28.
- Hsiao, K. T.; Little, R.; Restrepo, O.; Minaie, B. A Study of Direct Cure Kinetics Characterization during Liquid Composite Molding. Compos. Part A. Appl. Sci. Manuf. 2006, 37, 925–933. DOI: https://doi.org/10.1016/j.compositesa.2005.01.019.
- Mallick, P. K.;. Thermoset-matrix Composites for Lightweight Automotive Structures. Mater. Des. Manuf. Light. Veh. Woodhead Publishing Limited: Amsterdam. 2010; 208–231. doi: https://doi.org/10.1533/9781845697822.1.208.
- Chawla, K. K.;. Composite Materials; Springer New York: New York, 2012. DOI: https://doi.org/10.1007/978-0-387-74365-3.
- Starr, T. F.;. Pultrusion for Engineers; Elsevier: Abington Hall, Abington Cambridge CB1 6AH, England, 2000. DOI: https://doi.org/10.1533/9781855738881.97.
- Vedernikov, A.; Safonov, A.; Tucci, F.; Carlone, P.; Akhatov, I. Pultruded Materials and Structures: A Review. J. Compos. Mater. 2020. DOI: https://doi.org/10.1177/0021998320922894.
- Liu, M.; Yan, B.; Peng, X.; Peng, F.; Wang, L. Crashworthiness of Thermoplastic Woven Glass Fabric Reinforced Composite Tubes Manufactured by Pultrusion. Fibers Polym. 2020, 21, 416–427. DOI: https://doi.org/10.1007/s12221-020-9440-8.
- Barkanov, E.; Akishin, P.; Namsone, E.; Bondarchuk, A.; Pantelelis, N. Real-Time Characterization of Pultrusion Processes with a Temperature Control. Mech. Compos. Mater. 2020, 56, 135–148. DOI: https://doi.org/10.1007/s11029-020-09868-4.
- Sorrentino, L.; Marchetti, M.; Bellini, C.; Delfini, A.; Del Sette, F. Manufacture of High Performance Isogrid Structure by Robotic Filament Winding. Compos. Struct. 2017, 164, 43–50. DOI: https://doi.org/10.1016/j.compstruct.2016.12.061.
- Peters, S. T.; McLarty, J. L. Filament Winding. In ASM Handbook, Compos; Miracle, D. B.; Donaldson, S. L., Eds.; 2001; Vol. 21, pp 536–549. DOI: https://doi.org/10.31399/asm.hb.v21.a0003416.
- Sofi, T.; Neunkirchen, S.; Schledjewski, R. Path Calculation, Technology and Opportunities in Dry Fiber Winding: A Review. Adv. Manuf. Polym. Compos. Sci. 2018, 4, 57–72. DOI: https://doi.org/10.1080/20550340.2018.1500099.
- Vargas Rojas, E.; Chapelle, D.; Perreux, D.; Delobelle, B.; Thiebaud, F. Unified Approach of Filament Winding Applied to Complex Shape Mandrels. Compos. Struct. 2014, 116, 805–813. DOI: https://doi.org/10.1016/j.compstruct.2014.06.009.
- Fu, J.; Yun, J.; Jung, Y.; Lee, D. Generation of Filament-winding Paths for Complex Axisymmetric Shapes Based on the Principal Stress Field. Compos. Struct. 2017, 161, 330–339. DOI: https://doi.org/10.1016/j.compstruct.2016.11.022.
- Courtois, A.; Hirsekorn, M.; Benavente, M.; Jaillon, A.; Marcin, L.; Ruiz, E., Lévesque M. Viscoelastic Behavior of an Epoxy Resin during Cure below the Glass Transition Temperature: Characterization and Modeling. J. Compos. Mater. 2019, 53, 155–171. DOI: https://doi.org/10.1177/0021998318781226.
- Yan, M.; Tian, X.; Peng, G.; Li, D.; Zhang, X. High Temperature Rheological Behavior and Sintering Kinetics of CF/PEEK Composites during Selective Laser Sintering. Compos. Sci. Technol. 2018, 165, 140–147. DOI: https://doi.org/10.1016/j.compscitech.2018.06.023.
- Mackay, M. E.;. The Importance of Rheological Behavior in the Additive Manufacturing Technique Material Extrusion. J. Rheol. (N Y). 2018, 62, 1549–1561. DOI: https://doi.org/10.1122/1.5037687.
- Leon, A.; Perez, M.; Barasinski, A.; Abisset-Chavanne, E.; Defoort, B.; Chinesta, F. Multi-scale Modeling and Simulation of Thermoplastic Automated Tape Placement: Effects of Metallic Particles Reinforcement on Part Consolidation. Nanomaterials. 2019, 9. DOI: https://doi.org/10.3390/nano9050695.
- Aziz, A. R.; Ali, M. A.; Zeng, X.; Umer, R.; Schubel, P.; Cantwell, W. J. Transverse Permeability of Dry Fiber Preforms Manufactured by Automated Fiber Placement. Compos. Sci. Technol. 2017, 152, 57–67. DOI: https://doi.org/10.1016/j.compscitech.2017.09.011.
- Schaefer, P. M.; Gierszewski, D.; Kollmannsberger, A.; Zaremba, S.; Drechsler, K. Analysis and Improved Process Response Prediction of Laser- Assisted Automated Tape Placement with PA-6/carbon Tapes Using Design of Experiments and Numerical Simulations. Compos. Part A. Appl. Sci. Manuf. 2017, 96, 137–146. DOI: https://doi.org/10.1016/j.compositesa.2017.02.008.
- Wang, Y.; Chang, R.; Chen, G. Strain and Damage Self-sensing Properties of Carbon Nanofibers/carbon Fiber-reinforced Polymer Laminates. Adv. Mech. Eng. 2017, 9, 1–11. DOI: https://doi.org/10.1177/1687814016688641.
- Luan, C.; Yao, X.; Zhang, C.; Wang, B.; Fu, J. Large-scale Deformation and Damage Detection of 3D Printed Continuous Carbon Fiber Reinforced Polymer-matrix Composite Structures. Compos. Struct. 2019, 212, 552–560. DOI: https://doi.org/10.1016/j.compstruct.2019.01.064.
- Oromiehie, E.; Prusty, B. G.; Compston, P.; Rajan, G. Characterization of Process-induced Defects in Automated Fiber Placement Manufacturing of Composites Using Fiber Bragg Grating Sensors. Struct. Heal. Monit. 2018, 17, 108–117. DOI: https://doi.org/10.1177/1475921716685935.
- Frketic, J.; Dickens, T.; Ramakrishnan, S. Automated Manufacturing and Processing of Fiber-reinforced Polymer (FRP) Composites: An Additive Review of Contemporary and Modern Techniques for Advanced Materials Manufacturing. Addit. Manuf. 2017, 14, 69–86. DOI: https://doi.org/10.1016/j.addma.2017.01.003.
- Lasi, H.; Fettke, P.; Kemper, H. G.; Feld, T.; Hoffmann, M. Industry4.0. Bus. Inf. Syst. Eng. 2014, 6, 239–242. DOI: https://doi.org/10.1007/s12599-014-0334-4.
- Rodič, B.;. Industry 4.0 And the New Simulation Modelling Paradigm. Organizacija. 2017, 50, 193–207. DOI: https://doi.org/10.1515/orga-2017-0017.
- Bahrin, M. A. K.; Othman, M. F.; Azli, N. H. N.; Talib, M. F. Industry 4.0: A Review on Industrial Automation and Robotic. J. Teknol. 2016, 78, 137–143. DOI: https://doi.org/10.11113/jt.v78.9285.
- Kim, J. H.;. A Review of Cyber-Physical System Research Relevant to the Emerging IT Trends: Industry 4.0, IoT, Big Data, and Cloud Computing. J. Ind. Integr. Manag. 2017, 02, 1750011. DOI: https://doi.org/10.1142/s2424862217500117.
- Weyer, S.; Schmitt, M.; Ohmer, M.; Gorecky, D. Towards Industry 4.0 - Standardization as the Crucial Challenge for Highly Modular, Multi-vendor Production Systems. IFAC. 2015, 28, 579–584. DOI: https://doi.org/10.1016/j.ifacol.2015.06.143.
- Bonilla, S. H.; Silva, H. R. O.; da Silva, M. T.; Gonçalves, R. F.; Sacomano, J. B. Industry 4.0 And Sustainability Implications: A Scenario-based Analysis of the Impacts and Challenges. Sustain. 2018, 10. DOI: https://doi.org/10.3390/su10103740.
- Wang, B.;. The Future of Manufacturing: A New Perspective. Engineering. 2018, 4, 722–728. DOI: https://doi.org/10.1016/j.eng.2018.07.020.
- Popov, D.; Maltsev, E.; Fryazinov, O.; Pasko, A.; Akhatov, I. Efficient Contouring of Functionally Represented Objects for Additive Manufacturing. CAD Comput. Aided. Des. 2020, 129, 102917. DOI: https://doi.org/10.1016/j.cad.2020.102917.
- Strange, R.; Zucchella, A. Industry4.0, Global Value Chains and International Business. Multinatl. Bus. Rev. 2017, 25, 174–184. DOI: https://doi.org/10.1108/MBR-05-2017-0028.
- Björnsson, A.; Jonsson, M.; Johansen, K. Automated Material Handling in Composite Manufacturing Using Pick-and-place Systems – A Review. Robot. Comput. Integr. Manuf. 2018, 51, 222–229. DOI: https://doi.org/10.1016/j.rcim.2017.12.003.
- Shahabi, M.; Ghariblu, H. Optimal Joint Motion for Complicated Welding Geometry by a Redundant Robotic System. Eng. Optim. 2020, 52, 875–895. DOI: https://doi.org/10.1080/0305215X.2019.1630400.
- Ismail, N. A.; Ismail, M. I. S.; Radzman, M. A. M.; Ariffin, M. K. A. M.; As’arry, A. Parametric Optimization of Robot-based Single Point Incremental Forming Using Taguchi Method. Int. J. Integr. Eng. 2019, 11, 217–224. DOI: https://doi.org/10.30880/ijie.2019.11.01.023.
- Raspall, F.; Velu, R.; Vaheed, N. M. Fabrication of Complex 3D Composites by Fusing Automated Fiber Placement (AFP) and Additive Manufacturing (AM) Technologies. Adv. Manuf. Polym. Compos. Sci. 2019, 5, 6–16. DOI: https://doi.org/10.1080/20550340.2018.1557397.
- DebRoy, T.; Wei, H. L.; Zuback, J. S.; Mukherjee, T.; Elmer, J. W.; Milewski, J. O., Beese AM, Wilson-Heid AD, De A, Zhang W. Additive Manufacturing of Metallic Components – Process, Structure and Properties. Prog. Mater. Sci. 2018, 92, 112–224. DOI: https://doi.org/10.1016/j.pmatsci.2017.10.001.
- Sing, S. L.; Yeong, W. Y.; Wiria, F. E.; Tay, B. Y.; Zhao, Z.; Zhao, L., Tian Z, Yang S. Direct Selective Laser Sintering and Melting of Ceramics: A Review. Rapid. Prototyp. J. 2017, 23, 611–623. DOI: https://doi.org/10.1108/RPJ-11-2015-0178.
- Ngo, T. D.; Kashani, A.; Imbalzano, G.; Nguyen, K. T. Q.; Hui, D. Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges. Compos. Part B. Eng. 2018, 143, 172–196. DOI: https://doi.org/10.1016/j.compositesb.2018.02.012.
- Lu, Z.; Cao, J.; Song, Z.; Li, D.; Lu, B. Research Progress of Ceramic Matrix Composite Parts Based on Additive Manufacturing Technology. Virtual. Phys. Prototyp. 2019, 14, 333–348. DOI: https://doi.org/10.1080/17452759.2019.1607759.
- Taufik, M.; Jain, P. K. Part Surface Quality Improvement Studies in Fused Deposition Modelling Process: A Review. Aust. J. Mech. Eng. 2020, 1–25. DOI: https://doi.org/10.1080/14484846.2020.1723342.
- Ameen, W.; Ghaleb, A. M.; Alatefi, M.; Alkhalefah, H.; Alahmari, A. An Overview of Selective Laser Sintering and Melting Research Using Bibliometric Indicators. Virtual. Phys. Prototyp. 2018, 13, 282–291. DOI: https://doi.org/10.1080/17452759.2018.1489973.
- Friedrich, K.; Almajid, A. A. Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications. Appl. Compos. Mater. 2013, 20, 107–128. DOI: https://doi.org/10.1007/s10443-012-9258-7.
- Hamdan, A.; Mustapha, F.; Ahmad, K. A.; Mohd Rafie, A. S.; Ishak, M. R.; Ismail, A. E. The Effect of Customized Woven and Stacked Layer Orientation on Tensile and Flexural Properties of Woven Kenaf Fibre Reinforced Epoxy Composites. Int. J. Polym. Sci. 2016, 2016. DOI: https://doi.org/10.1155/2016/6514041.
- Stalin, T.; Thanigaivel, N. K.; Joseph, V. S.; Alvarado, P. V. Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components. RoboSoft 2019–2019 IEEE Int. Conf. Soft Robot. 2019, 762–767. DOI: https://doi.org/10.1109/ROBOSOFT.2019.8722752.
- Dickson, A. N.; Ross, K. A.; Dowling, D. P. Additive Manufacturing of Woven Carbon Fibre Polymer Composites. Compos. Struct. 2018, 206, 637–643. DOI: https://doi.org/10.1016/j.compstruct.2018.08.091.
- Mansouri, M. R.; Montazerian, H.; Schmauder, S.; Kadkhodapour, J. 3D-printed Multimaterial Composites Tailored for Compliancy and Strain Recovery. Compos. Struct. 2018, 184, 11–17. DOI: https://doi.org/10.1016/j.compstruct.2017.09.049.
- Khoo, Z. X.; Teoh, J. E. M.; Liu, Y.; Chua, C. K.; Yang, S.; An, J., Leong KF, Yeong WY. 3D Printing of Smart Materials: A Review on Recent Progresses in 4D Printing. Virtual. Phys. Prototyp. 2015, 10, 103–122. DOI: https://doi.org/10.1080/17452759.2015.1097054.
- Zhang, Z.; Demir, K. G.; Gu, G. X. Developments in 4D-printing: A Review on Current Smart Materials, Technologies, and Applications. Int. J. Smart. Nano. Mater. 2019, 10, 205–224. DOI: https://doi.org/10.1080/19475411.2019.1591541.
- Truby, R. L.; Lewis, J. A. Printing Soft Matter in Three Dimensions. Nature. 2016, 540, 371–378. DOI: https://doi.org/10.1038/nature21003.
- Glistau, E.; Machado, N. I. C. Industry 4.0, Logistics 4.0 And Materials - Chances and Solutions. Mater. Sci. Forum. 2018, 919, 307–314. DOI: https://doi.org/10.4028/.scientific.net/MSF.919.307.
- Mittal, G.; Rhee, K. Y.; Mišković-Stanković, V.; Hui, D. Reinforcements in Multi-scale Polymer Composites: Processing, Properties, and Applications. Compos. Part B. Eng. 2018, 138, 122–139. DOI: https://doi.org/10.1016/j.compositesb.2017.11.028.
- Rajak, D. K.; Pagar, D. D.; Menezes, P. L.; Linul, E. Fiber-reinforced Polymer Composites: Manufacturing, Properties, and Applications. Polymers (Basel). 2019, 11. DOI: https://doi.org/10.3390/polym11101667.
- Mugahed Amran, Y. H.; Alyousef, R.; Rashid, R. S. M.; Alabduljabbar, H.; Hung, C. C. Properties and Applications of FRP in Strengthening RC Structures: A Review. Structures. 2018, 16, 208–238. DOI: https://doi.org/10.1016/j.istruc.2018.09.008.
- Grant, C.;. Automated Processes for Composite Aircraft Structure. Ind. Rob. 2006, 33, 117–121. DOI: https://doi.org/10.1108/01439910610651428.
- Denkena, B.; Schmidt, C.; Völtzer, K.; Hocke, T. Thermographic Online Monitoring System for Automated Fiber Placement Processes. Compos. Part B. Eng. 2016, 97, 239–243. DOI: https://doi.org/10.1016/j.compositesb.2016.04.076.
- Oromiehie, E.; Prusty, B. G.; Compston, P.; Rajan, G. Automated Fibre Placement Based Composite Structures: Review on the Defects, Impacts and Inspections Techniques. Compos. Struct. 2019, 224, 110987. DOI: https://doi.org/10.1016/j.compstruct.2019.110987.
- Zhang, L.; Wang, X.; Pei, J.; Zhou, Y. Review of Automated Fibre Placement and Its Prospects for Advanced Composites. J. Mater. Sci. 2020, 55, 7121–7155. DOI: https://doi.org/10.1007/s10853-019-04090-7.
- Sun, S.; Han, Z.; Fu, H.; Jin, H.; Dhupia, J. S.; Wang, Y. Defect Characteristics and Online Detection Techniques during Manufacturing of FRPs Using Automated Fiber Placement: A Review. Polymers (Basel). 2020, 12, 1337. DOI: https://doi.org/10.3390/POLYM12061337.
- Schumacher, D.; Meyendorf, N.; Hakim, I.; Ewert, U. Defect Recognition in CFRP Components Using Various NDT Methods within a Smart Manufacturing Process. AIP Conf. Proc. 2018, 1949. DOI: https://doi.org/10.1063/1.5031521.
- Witkowski, K.;. Internet of Things, Big Data, Industry 4.0 - Innovative Solutions in Logistics and Supply Chains Management. Procedia. Eng. 2017, 182, 763–769. DOI: https://doi.org/10.1016/j.proeng.2017.03.197.
- Xia, T.; Xi, L. Manufacturing Paradigm-oriented PHM Methodologies for Cyber-physical Systems. J. Intell. Manuf. 2019, 30, 1659–1672. DOI: https://doi.org/10.1007/s10845-017-1342-2.
- Khayyam, H.; Jazar, R. N.; Nunna, S.; Golkarnarenji, G.; Badii, K.; Fakhrhoseini, S. M., Kumar S, Naebe M. PAN Precursor Fabrication, Applications and Thermal Stabilization Process in Carbon Fiber Production: Experimental and Mathematical Modelling. Prog. Mater. Sci. 2020, 107, 100575. DOI: https://doi.org/10.1016/j.pmatsci.2019.100575.
- Oztemel, E.; Gursev, S. Literature Review of Industry 4.0 And Related Technologies. J. Intell. Manuf. 2020, 31, 127–182. DOI: https://doi.org/10.1007/s10845-018-1433-8.
- Wan, J.; Yi, M.; Li, D.; Zhang, C.; Wang, S.; Zhou, K. Mobile Services for Customization Manufacturing Systems: An Example of Industry 4.0. IEEE Access. 2016, 4, 8977–8986. DOI: https://doi.org/10.1109/ACCESS.2016.2631152.
- Fernández-Caramés, T. M.; Blanco-Novoa, O.; Froiz-Míguez, I.; Fraga-Lamas, P. Towards an Autonomous Industry 4.0 Warehouse: A UAV and Blockchain-Based System for Inventory and Traceability Applications in Big Data-Driven Supply Chain Management. Sensors (Basel). 2019, 19. DOI: https://doi.org/10.3390/s19102394.
- Yanagimoto, J.; Ikeuchi, K. Sheet Forming Process of Carbon Fiber Reinforced Plastics for Lightweight Parts. CIRP Ann. Manuf. Technol. 2012, 61, 247–250. DOI: https://doi.org/10.1016/j.cirp.2012.03.129.
- Suzuki, T.; Takahashi, J. Prediction of Energy Intensity of Carbon Fiber Reinforced Plastics for Mass-produced Passenger Cars. Ninth Japan Int SAMPE Symp JISSE-9, Tokyo. 2005; 14–19.
- Singh, S. B.; Chawla, H. An Investigation Ofmaterial Characterization of Pultruded FRP H- and I-beams. Mech. Adv. Mater. Struct. 2018, 25, 124–142. DOI: https://doi.org/10.1080/15376494.2016.1250021.
- Ascione, F.; Lamberti, M.; Razaqpur, A. G. G.; Spadea, S. Strength and Stiffness of Adhesively Bonded GFRP Beam-column Moment Resisting Connections. Compos. Struct. 2017, 160, 1248–1257. DOI: https://doi.org/10.1016/j.compstruct.2016.11.021.
- Correia, J. R.; Branco, F.; Gonilha, J.; Silva, N.; Camotim, D. Glass Fibre Reinforced Polymer Pultruded Flexural Members: Assessment of Existing Design Methods. Struct. Eng. Int. J. 2010, 20, 362-369.
- Konstantopoulos, S.; Hueber, C.; Antoniadis, I.; Summerscales, J.; Schledjewski, R. Liquid Composite Molding Reproducibility in Real-world Production of Fiber Reinforced Polymeric Composites: A Review of Challenges and Solutions. Adv. Manuf. Polym. Compos. Sci. 2019, 5, 85–99. DOI: https://doi.org/10.1080/20550340.2019.1635778.
- Ivanov, D.; Sethi, S.; Dolgui, A.; Sokolov, B. A Survey on Control Theory Applications to Operational Systems, Supply Chain Management, and Industry 4.0. Ann. Rev. Control. 2018, 46, 134–147. DOI: https://doi.org/10.1016/j.arcontrol.2018.10.014.
- Gillet, V.; Aubignat, E.; Costil, S.; Courant, B.; Langlade, C.; Casari, P., Knapp W, Planche MP. Development of Low Pressure Cold Sprayed Copper Coatings on Carbon Fiber Reinforced Polymer (CFRP). Surf. Coatings Technol. 2019, 364, 306–316. DOI: https://doi.org/10.1016/j.surfcoat.2019.01.011.
- Bock, M.; Kleineberg, M. Assembly4.0 - Flexibly Picked Up, Precisely Mounted. SAE Tech. Pap. Ser. 2019, 1, 1–5. DOI: https://doi.org/10.4271/2019-01-1355.
- Slamani, M.; Chatelain, J. F. Assessment of the Suitability of Industrial Robots for the Machining of Carbon-fiber Reinforced Polymers (Cfrps). J. Manuf. Process. 2019, 37, 177–195. DOI: https://doi.org/10.1016/j.jmapro.2018.11.022.
- Suresh, M.; Sanders, A.; Prajapati, P.; Kaipa, K.; Kravchenko, O. G. Composite Sandwich Repair Using Through-thickness Reinforcement with Robotic Hand Micro-drilling. Compos. Struct. 2020, 248, 112473. DOI: https://doi.org/10.1016/j.compstruct.2020.112473.
- Mills, P.;. Robotic UV Curing: A Cost-effective Way to Cure Large 3-D Plastic Parts. Ann. Tech. Conf. 2007, 1, 174–183.
- Spickenheuer, A.; Scheffler, C.; Bittrich, L.; Haase, R.; Weise, D.; Garray, D., Heinrich G, Sirris L. Tailored Fiber Placement in Thermoplastic Composites. TLS 2017, 1, 21–22. DOI: https://doi.org/10.21935/tls.v1i2.95.
- Zhang, Y.; Li, Y.; Thakur, V. K.; Gao, Z.; Gu, J.; Kessler, M. R. High-performance Thermosets with Tailored Properties Derived from Methacrylated Eugenol and Epoxy-based Vinyl Ester. Polym. Int. 2018, 67, 544–549. DOI: https://doi.org/10.1002/pi.5542.
- Janssen, H.; Peters, T.; Brecher, C. Efficient Production of Tailored Structural Thermoplastic Composite Parts by Combining Tape Placement and 3d Printing. Procedia. CIRP. 2017, 66, 91–95. DOI: https://doi.org/10.1016/j.procir.2017.02.022.
- Esposito, L.; Cutolo, A.; Barile, M.; Lecce, L.; Mensitieri, G.; Sacco, E., Fraldi M. Topology Optimization-guided Stiffening of Composites Realized through Automated Fiber Placement. Compos. Part B. Eng. 2019, 164, 309–323. DOI: https://doi.org/10.1016/j.compositesb.2018.11.032.
- Stokes-Griffin, C. M.; Kollmannsberger, A.; Ehard, S.; Compston, P.; Drechsler, K. Manufacture of steel–CF/PA6 Hybrids in a Laser Tape Placement Process: Effect of First-ply Placement Rate on Thermal History and Lap Shear Strength. Compos. Part A. Appl. Sci. Manuf. 2018, 111, 42–53. DOI: https://doi.org/10.1016/j.compositesa.2018.05.007.
- Schmidt, C.; Denkena, B.; Gross, L.; Völtzer, K. Concept for Automated Production of CFRP-metal Hybrid Compounds Integrated in an Automated Fiber Placement Process. Procedia. CIRP. 2017, 62, 56–61. DOI: https://doi.org/10.1016/j.procir.2016.06.046.
- Parandoush, P.; Lin, D. A Review on Additive Manufacturing of Polymer-fiber Composites. Compos. Struct. 2017, 182, 36–53. DOI: https://doi.org/10.1016/j.compstruct.2017.08.088.
- Van, H. S.;. Factors Affecting the Properties of Composites Made by 4D Printing (Moldless Composites Manufacturing). Adv. Manuf. Polym. Compos. Sci. 2017, 3, 101–109. DOI: https://doi.org/10.1080/20550340.2017.1355519.
- Gardan, J.;. Smart Materials in Additive Manufacturing: State of the Art and Trends. Virtual. Phys. Prototyp. 2019, 14, 1–18. DOI: https://doi.org/10.1080/17452759.2018.1518016.
- Zeng, C.; Liu, L.; Bian, W.; Liu, Y.; Leng, J. 4D Printed Electro-induced Continuous Carbon Fiber Reinforced Shape Memory Polymer Composites with Excellent Bending Resistance. Compos. Part B. Eng. 2020, 194, 108034. DOI: https://doi.org/10.1016/j.compositesb.2020.108034.
- Yang, C.; Boorugu, M.; Dopp, A.; Ren, J.; Martin, R.; Han, D., Choi W, Lee H. 4D Printing Reconfigurable, Deployable and Mechanically Tunable Metamaterials. Mater. Horizons. 2019, 6, 1244–1250. DOI: https://doi.org/10.1039/c9mh00302a.
- Safonov, A. A.;. 3D Topology Optimization of Continuous Fiber-reinforced Structures via Natural Evolution Method. Compos. Struct. 2019, 215, 289–297. DOI: https://doi.org/10.1016/j.compstruct.2019.02.063.
- Budelmann, D.; Schmidt, C.; Meiners, D. Prepreg Tack: A Review of Mechanisms, Measurement, and Manufacturing Implication. Polym. Compos. 2020, 1–19. DOI: https://doi.org/10.1002/pc.25642.
- Lukaszewicz, D. H. J. A.; Ward, C.; Potter, K. D. The Engineering Aspects of Automated Prepreg Layup: History, Present and Future. Compos. Part B. Eng. 2012, 43, 997–1009. DOI: https://doi.org/10.1016/j.compositesb.2011.12.003.
- Szcesny, M.; Heieck, F.; Carosella, S.; Middendorf, P.; Sehrschön, H.; Schneiderbauer, M. The Advanced Ply Placement Process–an Innovative Direct 3D Placement Technology for Plies and Tapes. Adv. Manuf. Polym. Compos. Sci. 2017, 3, 2–9. DOI: https://doi.org/10.1080/20550340.2017.1291398.
- Rousseau, G.; Wehbe, R.; Halbritter, J.; Harik, R. Automated Fiber Placement Path Planning: A State-of-the-art Review. Comput. Aided. Des. Appl. 2019, 16, 172–203. DOI: https://doi.org/10.14733/cadaps.2019.172-203.
- Yassin, K.; Hojjati, M. Processing of Thermoplastic Matrix Composites through Automated Fiber Placement and Tape Laying Methods: A Review. J. Thermoplast. Compos. Mater. 2018, 31, 1676–1725. DOI: https://doi.org/10.1177/0892705717738305.
- Li, X.; Hallett, S. R.; Wisnom, M. R. Modelling the Effect of Gaps and Overlaps in Automated Fibre Placement (Afp)-manufactured Laminates. Sci. Eng. Compos. Mater. 2015, 22, 115–129. DOI: https://doi.org/10.1515/secm-2013-0322.
- Wang, X.; Jiang, M.; Zhou, Z.; Gou, J.; Hui, D. 3D Printing of Polymer Matrix Composites: A Review and Prospective. Compos. Part B. Eng. 2017, 110, 442–458. DOI: https://doi.org/10.1016/j.compositesb.2016.11.034.
- Zindani, D.; Kumar, K. An Insight into Additive Manufacturing of Fiber Reinforced Polymer Composite. Int. J. Light. Mater. Manuf. 2019, 2, 267–278. DOI: https://doi.org/10.1016/j.ijlmm.2019.08.004.
- Goh, G. D.; Yap, Y. L.; Agarwala, S.; Yeong, W. Y. Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite. Adv. Mater. Technol. 2019, 4, 1–22. DOI: https://doi.org/10.1002/admt.201800271.
- Srivastava, V. K.; Jain, P. K.; Kumar, P.; Pegoretti, A.; Bowen, C. R. Smart Manufacturing Process of Carbon-Based Low-Dimensional Structures and Fiber-Reinforced Polymer Composites for Engineering Applications. J. Mater. Eng. Perform. 2020, 29, 4162–4186. DOI: https://doi.org/10.1007/s11665-020-04950-3.
- Hofstätter, T.; Pedersen, D. B.; Tosello, G.; Hansen, H. N. State-of-the-art of Fiber-reinforced Polymers in Additive Manufacturing Technologies. J. Reinf. Plast. Compos. 2017, 36, 1061–1073. DOI: https://doi.org/10.1177/0731684417695648.
- Dilberoglu, U. M.; Gharehpapagh, B.; Yaman, U.; Dolen, M. The Role of Additive Manufacturing in the Era of Industry 4.0. Procedia. Manuf. 2017, 11, 545–554. DOI: https://doi.org/10.1016/j.promfg.2017.07.148.
- Fidan, I.; Imeri, A.; Gupta, A.; Hasanov, S.; Nasirov, A.; Elliott, A., Alifui-Segbaya F, Nanami N. The Trends and Challenges of Fiber Reinforced Additive Manufacturing. Int. J. Adv. Manuf. Technol. 2019, 102, 1801–1818. DOI: https://doi.org/10.1007/s00170-018-03269-7.
- Brenken, B.; Barocio, E.; Favaloro, A.; Kunc, V.; Pipes, R. B. Fused Filament Fabrication of Fiber-reinforced Polymers: A Review. Addit. Manuf. 2018, 21, 1–16. DOI: https://doi.org/10.1016/j.addma.2018.01.002.
- Balla, V. K.; Kate, K. H.; Satyavolu, J.; Singh, P.; Tadimeti, J. G. D. Additive Manufacturing of Natural Fiber Reinforced Polymer Composites: Processing and Prospects. Compos. Part B. Eng. 2019, 174, 106956. DOI: https://doi.org/10.1016/j.compositesb.2019.106956.
- Gan, D.; Dai, J. S.; Dias, J.; Umer, R.; Seneviratne, L. Singularity-Free Workspace Aimed Optimal Design of a 2T2R Parallel Mechanism for Automated Fiber Placement. J. Mech. Robot. 2015, 7. DOI: https://doi.org/10.1115/1.4029957.
- Kozaczuk, K.;. Automated Fiber Placement Systems Overview. Trans. Inst. Aviat. 2016, 245, 52–59. DOI: https://doi.org/10.5604/05096669.1226355.
- composites JS-H performance. 2008. ATL & AFP: Defining the megatrends in composite aerostructures. Ray; 1999.
- Debout, P.; Chanal, H.; Duc, E. Tool Path Smoothing of a Redundant Machine: Application to Automated Fiber Placement. Comput. Des. 2011, 43, 122–132. DOI: https://doi.org/10.1016/j.cad.2010.09.011.
- Shirinzadeh, B.; Alici, G.; Foong, C. W.; Cassidy, G. Fabrication Process of Open Surfaces by Robotic Fibre Placement. Robot. Comput. Integr. Manuf. 2004, 20, 17–28. DOI: https://doi.org/10.1016/S0736-5845(03)00050-4.
- Liu, Y.-N.; Yuan, C.; Liu, C.; Pan, J.; Dong, Q. Study on the Resin Infusion Process Based on Automated Fiber Placement Fabricated Dry Fiber Preform. Sci. Rep. 2019, 9, 7440. DOI: https://doi.org/10.1038/s41598-019-43982-1.
- Market LS-WME. ATL/AFP-the key machine for manufacturing of modern large airplane (A). 2009
- Han, Z.; Sun, S.; Shao, Z.; Fu, H. Multiscale Collaborative Optimization of Processing Parameters for Carbon Fiber/Epoxy Laminates Fabricated by High-Speed Automated Fiber Placement. Adv. Mater. Sci. Eng. 2016, 2016, 1–14. DOI: https://doi.org/10.1155/2016/5480352.
- Shirinzadeh, B.; Cassidy, G.; Oetomo, D.; Alici, G.; Ang, M. H. Trajectory Generation for Open-contoured Structures in Robotic Fibre Placement. Robot. Comput. Integr. Manuf. 2007, 23, 380–394. DOI: https://doi.org/10.1016/j.rcim.2006.04.006.
- Olsen, H. B.; Craig, J. J. Automated Composite Tape Lay-up Using Robotic Devices. [1993] Proc. IEEE Int. Conf. Robot. Autom. IEEE Comput. Soc. Press, Atlanta, GA. 1993, Vol. 3. 291–297. doi:https://doi.org/10.1109/ROBOT.1993.292190.
- ATL and AFP: Signs of evolution in machine process control. 2008. https://www.compositesworld.com/articles/atl-and-afp-signs-of-evolution-in-machine-process-control (accessed Jan 7, 2021)
- Crosky, A.; Grant, C.; Kelly, D.; Legrand, X.; Pearce, G. Fibre Placement Processes for Composites Manufacture. Adv. Compos. Manuf. Process Des., Woodhead Publishing: Cambridge; 2015, p. 79–92. DOI: https://doi.org/10.1016/B978-1-78242-307-2.00004-X.
- Chinesta, F.; Leygue, A.; Bognet, B.; Ghnatios, C.; Poulhaon, F.; Bordeu, F., Barasinski A, Poitou A, Chatel S, Maison-Le-Poec S. First Steps Towards an Advanced Simulation of Composites Manufacturing by Automated Tape Placement. Int. J. Mater. Form. 2014, 7, 81–92. DOI: https://doi.org/10.1007/s12289-012-1112-9.
- Chu, Q.; Li, Y.; Xiao, J.; Huan, D.; Zhang, X.; Chen, X. Processing and Characterization of the Thermoplastic Composites Manufactured by Ultrasonic Vibration–assisted Automated Fiber Placement. J. Thermoplast. Compos. Mater. 2018, 31, 339–358. DOI: https://doi.org/10.1177/0892705717697781.
- mtorres. New 2D Integrated Torreslayup System. 2017. https://www.mtorres.es/en/communication/news/new-2d-integrated-torreslayup-system (accessed Jan 7, 2021)
- Sloan, J.; Modular, mobile, multiple robotics poised to change the AFP/ATL paradigm 2019. https://www.compositesworld.com/articles/modular-mobile-multiple-robotics-poised-to-change-the-afpatl-paradigm. (accessed Jan 7, 2021)
- Robot ballet in record time: a world first – lightweight wings manufactured using two synchronised robots. 2017. https://www.dlr.de/content/en/articles/news/2017/20171220_robot-ballet-in-record-time-a-world-first-lightweight-wings-manufactured-using-two-synchronised-robots_25506.html (accessed Jan 7th, 2021)
- Hassan, M.; Liu, D.; Xu, D.; Two-Stage, A. Approach to Collaborative Fiber Placement through Coordination of Multiple Autonomous Industrial Robots. J. Intell. Robot. Syst. 2019, 95, 915–933. DOI: https://doi.org/10.1007/s10846-018-0919-0.
- Eckardt, M.; Buchheim, A.; Gerngross, T. Investigation of an Automated Dry Fiber Preforming Process for an Aircraft Fuselage Demonstrator Using Collaborating Robots. CEAS Aeronaut. J. 2016, 7, 429–440. DOI: https://doi.org/10.1007/s13272-016-0199-y.
- Alebooyeh, M.; Wang, B.; Urbanic, R. J. Performance Study of an Innovative Collaborative Robot Gripper Design on Different Fabric Pick and Place Scenarios. SAE Tech. Pap., vol. 2020- April, SAE International, Detroit; 2020. DOI: https://doi.org/10.4271/2020-01-1304.
- Gan, D.; Dai, J. S.; Dias, J.; Umer, R.; Seneviratne, L. Parallel Mechanism Based Automated Fiber Placement System. 2016.
- Rakhshbahar, M.; Sinapius, M. A Novel Approach: Combination of Automated Fiber Placement (AFP) and Additive Layer Manufacturing (ALM). J. Compos. Sci. 2018, 2, 42. DOI: https://doi.org/10.3390/jcs2030042.
- Chen, J.; Chen-Keat, T.; Hojjati, M.; Vallee, A.; Octeau, M.-A.; Yousefpour, A. Impact of Layup Rate on the Quality of Fiber Steering/cut-restart in Automated Fiber Placement Processes. Sci. Eng. Compos. Mater. 2015, 22, 165–173. DOI: https://doi.org/10.1515/secm-2013-0257.
- Jeffries, K. A.;. Enhanced Robotic Automated Fiber Placement with Accurate Robot Technology and Modular Fiber Placement Head. SAE Int. J. Aerosp. 2013, 6, 2013–2290. DOI: https://doi.org/10.4271/2013-01-2290.
- Gordon, T.; Xu, X.; Wisnom, M. R.; Kim, B. C. Novel Tape Termination Method for Automated Fibre Placement: Cutting Characteristics and Delamination Suppression. Compos. Part A. Appl. Sci. Manuf. 2020, 137, 106023. DOI: https://doi.org/10.1016/j.compositesa.2020.106023.
- Li, Y. H.; Fu, H. Y.; Shao, Z. X. The Influence of Preheating on Automated Fiber Placement Speed. Adv. Mater. Res. 2011, 213, 136–142. DOI: https://doi.org/10.4028/.scientific.net/AMR.213.136.
- Stokes-Griffin, C. M.; Compston, P. The Effect of Processing Temperature and Placement Rate on the Short Beam Strength of Carbon fibre–PEEK Manufactured Using a Laser Tape Placement Process. Compos. Part A. Appl. Sci. Manuf. 2015, 78, 274–283. DOI: https://doi.org/10.1016/j.compositesa.2015.08.008.
- Stokes-Griffin, C. M.; Kollmannsberger, A.; Compston, P.; Drechsler, K. The Effect of Processing Temperature on Wedge Peel Strength of CF/PA 6 Laminates Manufactured in a Laser Tape Placement Process. Compos. Part A. Appl. Sci. Manuf. 2019, 121, 84–91. DOI: https://doi.org/10.1016/j.compositesa.2019.02.011.
- Di Francesco, M.; Veldenz, L.; Dell’Anno, G.; Potter, K. Heater Power Control for Multi-material, Variable Speed Automated Fibre Placement. Compos. Part A. Appl. Sci. Manuf. 2017, 101, 408–421. DOI: https://doi.org/10.1016/j.compositesa.2017.06.015.
- Rudberg, T.; Flynn, R.; Nielson, J. Production Implementation of Multiple Machine, High Speed Fiber Placement for Large Structures. SAE Int. J. Aerosp. 2010, 3. DOI: https://doi.org/10.4271/2010-01-1877.
- Chanteli, A.; Bandaru, A. K.; Peeters, D.; O’Higgins, R. M.; Weaver, P. M. Influence of Repass Treatment on Carbon Fibre-reinforced PEEK Composites Manufactured Using Laser-assisted Automatic Tape Placement. Compos. Struct. 2020, 248, 112539. DOI: https://doi.org/10.1016/j.compstruct.2020.112539.
- Schledjewski, R.;. Thermoplastic Tape Placement Process – In Situ Consolidation Is Reachable. Plast. Rubber. Compos. 2009, 38, 379–386. DOI: https://doi.org/10.1179/146580109X12540995045804.
- Dhinakaran, V.; Surendar, K. V.; Hasunfur Riyaz, M. S.; Ravichandran, M. Review on Study of Thermosetting and Thermoplastic Materials in the Automated Fiber Placement Process. Mater. Today. Proc. 2020, 27, 812–815. DOI: https://doi.org/10.1016/j.matpr.2019.12.355.
- Schledjewski, R., Miaris, A. Thermoplastic tape placement by means of diode laser heating, International SAMPE Symposium and Exhibition (Proceedings), SAMPE '09 Spring Symposium Conference Proceedings; Baltimore, MD; United States, 2009.
- Lamontia, M.;. Remaining Developments Required for Commercializing in Situ Thermoplastic. ATP. 2007.
- Kim, K.-Y.; Ye, L. Interlaminar fracture toughness of CF/PEI composites at elevated temperatures: Roles of matrix toughness and fibre/matrix adhesion. Composites Part A: Applied Science and Manufacturing, 2004, 35(4), 477-487. DOI:https://doi.org/10.1016/j.compositesa.2003.10.005
- Stokes-Griffin, C. M.; Matuszyk, T. I.; Compston, P.; Cardew-Hall, M. J. Modelling the Automated Tape Placement of Thermoplastic Composites with In-Situ Consolidation. Sustain. Automot. Technol. Springer Berlin Heidelberg: Berlin, Heidelberg; 2012; 61–68. DOI: https://doi.org/10.1007/978-3-642-24145-1_9.
- Schell, J.S.U.; Guilleminot, J.; Binetruy, C.; Krawczak, P. Computational and experimental analysis of fusion bonding in thermoplastic composites: Influence of process parameters. Journal of Materials Processing Technology, 2009, 209(11), 5211–5219. DOI: https://doi.org/10.1016/j.jmatprotec.2009.03.008
- Lukaszewicz, D. H. J. A.; Potter, K. D.; Eales, J. A Concept for the in Situ Consolidation of Thermoset Matrix Prepreg during Automated Lay-up. Compos. Part B. Eng. 2013, 45, 538–543. DOI: https://doi.org/10.1016/j.compositesb.2012.09.008.
- Sarrazin, H.; Springer, G. S. Thermochemical and Mechanical Aspects of Composite Tape Laying. J. Compos. Mater. 1995, 29, 1908–1943. DOI: https://doi.org/10.1177/002199839502901407.
- Zhao, C.; Wang, X.; Liu, X.; Ma, C.; Chu, Q.; Xiao, J. Study of Integral Hat-stiffened Composite Structures Manufactured by Automated Fiber Placement and Co-curing Process. Compos. Struct. 2020, 246, 112427. DOI: https://doi.org/10.1016/j.compstruct.2020.112427.
- Orth, T.; Krahl, M.; Parlevliet, P.; Modler, N. Optical Thermal Model for LED Heating in Thermoset-automated Fiber Placement. Adv. Manuf. Polym. Compos. Sci. 2018, 4, 73–82. DOI: https://doi.org/10.1080/20550340.2018.1507798.
- Hörmann, P.; Stelzl, D.; Lichtinger, R.; Van Nieuwenhove, S.; Mazón Carro, G.; Drechsler, K. On the Numerical Prediction of Radiative Heat Transfer for Thermoset Automated Fiber Placement. Compos. Part A. Appl. Sci. Manuf. 2014, 67, 282–288. DOI: https://doi.org/10.1016/j.compositesa.2014.08.019.
- Schmidt, C.; Weber, P.; Hocke, T.; Denkena, B. Influence of Prepreg Material Quality on Carbon Fiber Reinforced Plastic Laminates Processed by Automated Fiber Placement. Procedia. CIRP. 2018, 67, 422–427. DOI: https://doi.org/10.1016/j.procir.2017.12.236.
- Lefebure, P.; Soccard, E., … MP-S. Thermoplastic composites technologies for manufacturing nose fuselage structures. SAMPE Publ 1161 … 2013
- Khan, M. A.; Mitschang, P.; Schledjewski, R. Identification of Some Optimal Parameters to Achieve Higher Laminate Quality through Tape Placement Process. Adv. Polym. Technol. 2010, 29, 98–111. DOI: https://doi.org/10.1002/adv.20177.
- Comer, A. J.; Ray, D.; Obande, W. O.; Jones, D.; Lyons, J.; Rosca, I., O’higgins RM, McCarthy MA. Mechanical Characterisation of Carbon fibre–PEEK Manufactured by Laser-assisted Automated-tape-placement and Autoclave. Compos. Part A. Appl. Sci. Manuf. 2015, 69, 10–20. DOI: https://doi.org/10.1016/j.compositesa.2014.10.003.
- Ray, D.; Comer, A. J.; Lyons, J.; Obande, W.; Jones, D.; Higgins, R. M. O., McCarthy MA. Fracture Toughness of Carbon Fiber/polyether Ether Ketone Composites Manufactured by Autoclave and Laser-assisted Automated Tape Placement. J. Appl. Polym. Sci. 2014, 132, n/a-n/a. DOI: https://doi.org/10.1002/app.41643.
- Stokes-Griffin, C. M.; Compston, P. A Combined Optical-thermal Model for Near-infrared Laser Heating of Thermoplastic Composites in an Automated Tape Placement Process. Compos. Part A. Appl. Sci. Manuf. 2015, 75, 104–115. DOI: https://doi.org/10.1016/j.compositesa.2014.08.006.
- Clancy, G.; Peeters, D.; Oliveri, V.; Jones, D.; O’Higgins, R. M.; Weaver, P. M. A Study of the Influence of Processing Parameters on Steering of Carbon Fibre/PEEK Tapes Using Laser-assisted Tape Placement. Compos. Part B. Eng. 2019, 163, 243–251. DOI: https://doi.org/10.1016/j.compositesb.2018.11.033.
- Clancy, G. J.; Peeters, D.; Oliveri, V.; Jones, D.; O’Higgins, R.; Weaver, P. M. Steering of Carbon Fiber/Thermoplastic Pre-preg Tapes Using Laser-Assisted Tape Placement; American Institute of Aeronautics and Astronautics: Reston, Virginia, 2018. DOI: https://doi.org/10.2514/6.2018-0478.
- Velu, R.; Vaheed, N.; Ramachandran, M. K.; Raspall, F. Experimental Investigation of Robotic 3D Printing of High-performance Thermoplastics (PEEK): A Critical Perspective to Support Automated Fibre Placement Process. Int. J. Adv. Manuf. Technol. 2020, 108, 1007–1025. DOI: https://doi.org/10.1007/s00170-019-04623-z.
- Rizzolo, R. H.; Walczyk, D. F. Ultrasonic Consolidation of Thermoplastic Composite Prepreg for Automated Fiber Placement. J. Thermoplast. Compos. Mater. 2016, 29, 1480–1497. DOI: https://doi.org/10.1177/0892705714565705.
- Kollmannsberger, A.; Lichtinger, R.; Hohenester, F.; Ebel, C.; Drechsler, K. Numerical Analysis of the Temperature Profile during the Laser-assisted Automated Fiber Placement of CFRP Tapes with Thermoplastic Matrix. J. Thermoplast. Compos. Mater. 2018, 31, 1563–1586. DOI: https://doi.org/10.1177/0892705717738304.
- Khan, T.; Fikri, A.; Irfan, M. S.; Gunister, E.; Umer, R. The Effect of Hybridization on Microstructure and Thermo-mechanical Properties of Composites Reinforced with Different Weaves of Glass and Carbon Fabrics. J. Compos. Mater. 2020, 002199832097472. DOI: https://doi.org/10.1177/0021998320974728.
- José-Trujillo, E.; Rubio-González, C.; Rodríguez-González, J. Seawater Ageing Effect on the Mechanical Properties of Composites with Different Fiber and Matrix Types. J. Compos. Mater. 2019, 53, 3229–3241. DOI: https://doi.org/10.1177/0021998318811514.
- Behera, A.; Behera, R. K.; Sahu, P.; Swain, R. R.; Mahapatra, T. R. Tensile and Failure Behavior of Kevlar Fiber Reinforced Epoxy Matrix Composite Exposed to Different Environmental Conditions. Mater. Today. Proc. 2018, 5, 20250–20256. DOI: https://doi.org/10.1016/j.matpr.2018.06.396.
- Schmidt, C.; Schultz, C.; Weber, P.; Denkena, B. Evaluation of Eddy Current Testing for Quality Assurance and Process Monitoring of Automated Fiber Placement. Compos. Part B. Eng. 2014, 56, 109–116. DOI: https://doi.org/10.1016/j.compositesb.2013.08.061.
- Abulizi, D.; Duan, Y.; Li, D.; Lu, B. A New Method for Glass-fiber Reinforced Composites Manufacturing: Automated Fiber Placement with In-situ UV Curing. 2011 IEEE Int. Symp. Assem. Manuf., IEEE; Tampere, Finland, 2011, p. 1–4. DOI: https://doi.org/10.1109/ISAM.2011.5942326.
- Ghayour, M.; Hojjati, M.; Ganesan, R. Effect of Tow Gaps on Impact Strength of Thin Composite Laminates Made by Automated Fiber Placement: Experimental and Semi-analytical Approaches. Compos. Struct. 2020, 248, 112536. DOI: https://doi.org/10.1016/j.compstruct.2020.112536.
- Falcó, O.; Mayugo, J. A.; Lopes, C. S.; Gascons, N.; Costa, J. Variable-stiffness Composite Panels: Defect Tolerance under In-plane Tensile Loading. Compos. Part A. Appl. Sci. Manuf. 2014, 63, 21–31. DOI: https://doi.org/10.1016/j.compositesa.2014.03.022.
- Han, Z.; Sun, S.; Li, W.; Zhao, Y.; Shao, Z. Experimental Study of the Effect of Internal Defects on Stress Waves during Automated Fiber Placement. Polymers (Basel). 2018, 10, 413. DOI: https://doi.org/10.3390/polym10040413.
- Oromiehie, E.; Prusty, B. G.; Rajan, G.; Compston, P. Optical Fiber Bragg Grating Sensors for Process Monitoring in Advanced Composites. 2016 IEEE Sensors Appl. Symp., IEEE; Catania, Italy, 2016, p. 1–5. DOI: https://doi.org/10.1109/SAS.2016.7479849.
- How much is that composite wing in the window? | CompositesWorld. n.d.
- Assadi, M.; Field, T. AFP Processing of Dry Fiber Carbon Materials (DFP) for Improved Rates and Reliability. SAE Tech. Pap., vol. 2020- March, SAE International, Pasadena, United States; 2020, p. 1196–1201. DOI: https://doi.org/10.4271/2020-01-0030.
- Rudd, C.; Turner, M.; Long, A.; Middleton, V. Tow Placement Studies for Liquid Composite Moulding. Compos. Part A. Appl. Sci. Manuf. 1999, 30, 1105–1121. DOI: https://doi.org/10.1016/S1359-835X(99)00010-X.
- Belhaj, M.; Deleglise, M.; Comas-Cardona, S.; Demouveau, H.; Binetruy, C.; Duval, C., Figueiredo P. Dry Fiber Automated Placement of Carbon Fibrous Preforms. Compos. Part B. Eng. 2013, 50, 107–111. DOI: https://doi.org/10.1016/j.compositesb.2013.01.014.
- Rimmel, O.; May, D.; Goergen, C.; Poeppel, A.; Mitschang, P. Development and Validation of Recycled Carbon Fiber-based Binder Tapes for Automated Tape Laying Processes. J. Compos. Mater. 2019, 53, 3257–3268. DOI: https://doi.org/10.1177/0021998318820422.
- Lozano, G. G.; Tiwari, A.; Turner, C.; Astwood, S. A Review on Design for Manufacture of Variable Stiffness Composite Laminates. Proc. Inst. Mech. Eng. Part B. 2016, 230, 981–992. DOI: https://doi.org/10.1177/0954405415600012.
- Schlegel, K.;. A Literature Review of Quality Control for Automated Lay-up Processes. Zeitschrift. Kunststofftechnik. 2019, 1, 392–436. DOI: https://doi.org/10.3139/O999.01062019.
- Chevalier, P. L.; Kassapoglou, C.; Gürdal, Z. Fatigue Behavior of Composite Laminates with Automated Fiber Placement Induced Defects- a Review. Int. J. Fatigue. 2020, 140, 105775. DOI: https://doi.org/10.1016/j.ijfatigue.2020.105775.
- Heinecke, F.; Willberg, C. Manufacturing-Induced Imperfections in Composite Parts Manufactured via Automated Fiber Placement. J. Compos. Sci. 2019, 3, 56. DOI: https://doi.org/10.3390/jcs3020056.
- Falcó, O.; Lopes, C. S.; Naya, F.; Sket, F.; Maimí, P.; Mayugo, J. A. Modelling and Simulation of Tow-drop Effects Arising from the Manufacturing of Steered-fibre Composites. Compos. Part A. Appl. Sci. Manuf. 2017, 93, 59–71. DOI: https://doi.org/10.1016/j.compositesa.2016.11.015.
- Woigk, W.; Hallett, S. R.; Jones, M. I.; Kuhtz, M.; Hornig, A.; Gude, M. Experimental Investigation of the Effect of Defects in Automated Fibre Placement Produced Composite Laminates. Compos. Struct. 2018, 201, 1004–1017. DOI: https://doi.org/10.1016/j.compstruct.2018.06.078.
- Rajan, S.; Sutton, M. A.; Wehbe, R.; Tatting, B.; Gürdal, Z.; Kidane, A., Harik R. Experimental Investigation of Prepreg Slit Tape Wrinkling during Automated Fiber Placement Process Using StereoDIC. Compos. Part B. Eng. 2019, 160, 546–557. DOI: https://doi.org/10.1016/j.compositesb.2018.12.017.
- Belhaj, M.; Hojjati, M. Wrinkle Formation during Steering in Automated Fiber Placement: Modeling and Experimental Verification. J. Reinf. Plast. Compos. 2018, 37, 396–409. DOI: https://doi.org/10.1177/0731684417752872.
- Bakhshi, N.; Hojjati, M. Time-dependent Wrinkle Formation during Tow Steering in Automated Fiber Placement. Compos. Part B. Eng. 2019, 165, 586–593. DOI: https://doi.org/10.1016/j.compositesb.2019.02.034.
- Nartey, M.; Zhang, T.; Gong, B.; Wang, J.; Peng, S.; Wang, H., Peng HX. Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates through Tailored Gaps and Overlaps. Compos. Part B. Eng. 2020, 196, 108097. DOI: https://doi.org/10.1016/j.compositesb.2020.108097.
- Croft, K.; Lessard, L.; Pasini, D.; Hojjati, M.; Chen, J.; Yousefpour, A. Experimental Study of the Effect of Automated Fiber Placement Induced Defects on Performance of Composite Laminates. Compos. Part A. Appl. Sci. Manuf. 2011, 42, 484–491. DOI: https://doi.org/10.1016/j.compositesa.2011.01.007.
- Cemenska, J.; Rudberg, T.; Henscheid, M. Automated In-Process Inspection System for AFP Machines. SAE Int. J. Aerosp. 2015, 8. DOI: https://doi.org/10.4271/2015-01-2608.
- Maass, D.;. Progress in Automated Ply Inspection of AFP Layups. Reinf. Plast. 2015, 59, 242–245. DOI: https://doi.org/10.1016/j.repl.2015.05.002.
- Oromiehie, E.; Gangadhara Prusty, B.; Compston, P.; Rajan, G. In-situ Simultaneous Measurement of Strain and Temperature in Automated Fiber Placement (AFP) Using Optical Fiber Bragg Grating (FBG) Sensors. Adv. Manuf. Polym. Compos. Sci. 2017, 3, 52–61. DOI: https://doi.org/10.1080/20550340.2017.1317447.
- Oromiehie, E.; Chakladar, N.; Rajan, G.; Prusty, B. Online Monitoring and Prediction of Thermo-Mechanics of AFP Based Thermoplastic Composites. Sensors. 2019, 19, 1310. DOI: https://doi.org/10.3390/s19061310.
- Schmidt, C.; Hocke, T.; Denkena, B. Artificial Intelligence for Non-destructive Testing of CFRP Prepreg Materials. Prod. Eng. 2019, 13, 617–626. DOI: https://doi.org/10.1007/s11740-019-00913-3.
- Bardl, G.; Nocke, A.; Cherif, C.; Pooch, M.; Schulze, M.; Heuer, H., Schiller M, Kupke R, Klein M. Automated Detection of Yarn Orientation in 3D-draped Carbon Fiber Fabrics and Preforms from Eddy Current Data. Compos. Part B. Eng. 2016, 96, 312–324. DOI: https://doi.org/10.1016/j.compositesb.2016.04.040.
- Schulze, M. H.; Meyendorf, N.; Heuer, H. Analysis Techniques for Eddy Current Imaging of Carbon Fiber Materials*. Mater. Test. 2010, 52, 603–609. DOI: https://doi.org/10.3139/120.110167.
- Fu, H. Y.; Li, W. Q.; Sun, S. Z.; Han, Z. Y. Experimental Study on Relationship between Processing Parameters and Stress Wave Propagation during Automated Fiber Placement Process. IOP Conf. Ser. Mater. Sci. Eng., 213, Institute of Physics Publishing: Guangzhou, China; 2017, p. 012031. DOI: https://doi.org/10.1088/1757-899X/213/1/012031.
- Sun, S.; Han, Z.; Fu, H. Characteristics of Stress Wave Propagation of Carbon Fiber/Epoxy Laminates Fabricated by High-speed Automated Fiber Placement. Procedia. CIRP. 2016, 56, 255–260. DOI: https://doi.org/10.1016/j.procir.2016.10.076.
- Krombholz, C.; Perner, M.; Bock, M.; Röstermundt, D. Improving the Production Quality of the Advanced Automated Fiber Placementprocess by Means of Online Path Correction. 28th Int. Conf. Aeronaut. Sci., Brisbane, Australia. 2012.
- Palardy-Sim, M.; Rivard, M.; Lamouche, G. Advances in a Next Generation Measurement & Inspection System for Automated Fibre Placement. 2019
- Rudberg, T.; Nielson, J.; Henscheid, M.; Cemenska, J. Improving AFP Cell Performance. SAE. Int. J. Aerosp. 2014, 7. DOI: https://doi.org/10.4271/2014-01-2272.
- Di Fratta, C.; Klunker, F.; Ermanni, P. A Methodology for Flow-front Estimation in LCM Processes Based on Pressure Sensors. Compos. Part A. Appl. Sci. Manuf. 2013, 47, 1–11. DOI: https://doi.org/10.1016/j.compositesa.2012.11.008.
- Gupta, N.; Sundaram, R. Fiber Optic Sensors for Monitoring Flow in Vacuum Enhanced Resin Infusion Technology (Verity) Process. Compos. Part A. Appl. Sci. Manuf. 2009, 40, 1065–1070. DOI: https://doi.org/10.1016/j.compositesa.2009.04.022.
- Ali, M. A.; Umer, R.; Khan, K. A.; Samad, Y. A.; Liao, K.; Cantwell, W. Graphene Coated Piezo-resistive Fabrics for Liquid Composite Molding Process Monitoring. Compos. Sci. Technol. 2017, 148, 106–114. DOI: https://doi.org/10.1016/j.compscitech.2017.05.022.
- Dai, H.; Thostenson, E. T. Scalable and Multifunctional Carbon Nanotube-based Textile as Distributed Sensors for Flow and Cure Monitoring. Carbon. N.Y. 2020, 164, 28–41. DOI: https://doi.org/10.1016/j.carbon.2020.02.079.
- Caglar, B.; Hancioglu, M.; Sozer, E. M. Monitoring and Modeling of Part Thickness Evolution in Vacuum Infusion Process. J. Compos. Mater. 2020, 002199832096317. DOI: https://doi.org/10.1177/0021998320963173.
- Kang, K. T.; Chun, H. J.; Son, J. H.; Lee, J. A.; Byun, J. H.; Um, M. K., Lee SK, Jang JW. Quantitative Accessibility of Delamination in Composite Using Lamb Wave by Experiments and FEA. Adv. Compos. Mater. 2011, 20, 361–373. DOI: https://doi.org/10.1163/092430411X558503.
- Colas, O.; Courtemanche, B.; Le Reun, A. Online Infrared Thermography: Application to Filament Winding Process Defects Detection. Proc. 2018 Int. Conf. Quant. InfraRed Thermogr., QIRT Council, Berlin, Germany; 2018. DOI: https://doi.org/10.21611/qirt.2018.072.
- Hassen, A. A.; Vaidya, U. K.; Clarkson, G. E. Innovative Nondestructive Ultrasonic Testing And Analysis For Frp Piping. n.d.
- Halabe, U. B.; Vasudevan, A.; Klinkhachorn, P.; GangaRao, H. V. S. Detection of Subsurface Defects in Fiber Reinforced Polymer Composite Bridge Decks Using Digital Infrared Thermography. Nondestruct. Test. Eval. 2007, 22, 155–175. DOI: https://doi.org/10.1080/10589750701448381.
- Essig, W.; Kreutzbruck, M. Development of an Inline Monitoring System for Quality Assurance of Thermoplastic CFRP Tape Using Air-coupled Ultrasound. AIP Conf. Proc., 2139, American Institute of Physics Inc.: Cancun, Mexico; 2019, p. 110002. DOI: https://doi.org/10.1063/1.5121677.
- Seon, G.; Nikishkov, Y.; Makeev, A.; Ferguson, L. Towards a Digital Twin for Mitigating Void Formation during Debulking of Autoclave Composite Parts. Eng. Fract. Mech. 2020, 225, 106792. DOI: https://doi.org/10.1016/j.engfracmech.2019.106792.
- Hudson, T. B.; Palmieri, F. L.; Abbott, T. B.; Seebo, J. P.; Burke, E. R. Design Of An Automated Ultrasonic Scanning System For In-Situ Composite Cure Monitoring And Defect Detection. 2019.
- Xin, C.; Gu, Y.; Li, M.; Li, Y.; Zhang, Z. Online Monitoring and Analysis of Resin Pressure inside Composite Laminate during Zero-bleeding Autoclave Process. Polym. Compos. 2011, 32, 314–323. DOI: https://doi.org/10.1002/pc.21048.
- Arhant, M.; Meek, N.; Penumadu, D.; Davies, P.; Garg, N. Residual Strains Using Integrated Continuous Fiber Optic Sensing in Thermoplastic Composites and Structural Health Monitoring. Exp. Mech. 2018, 58, 167–176. DOI: https://doi.org/10.1007/s11340-017-0339-2.
- Wang, W. P.; Hwang, T. H.; Shu, E. Y.; Vartanian, M. H.; Ridilla, R. A. Fiber Optic Bend Sensor for In-process Monitoring of Polymeric Composites. Appl. Compos. Mater. 1997, 4, 187–195. DOI: https://doi.org/10.1007/BF02481780.
- Lee, H.; Bi, C.; Tang, S.; Hayashi, T.; Takahashi, J. Formability and Flow Front Observation of Carbon/polyamide 6 Randomly Oriented Strand Composites during Compression Molding. J. Reinf. Plast. Compos. 2017, 36, 1727–1744. DOI: https://doi.org/10.1177/0731684417725583.
- Hughes, L.; Dwivedi, Y. K.; Rana, N. P.; Williams, M. D.; Raghavan, V. Perspectives on the Future of Manufacturing within the Industry 4.0 Era. Prod. Plan. Control. 2020, 1–21. DOI: https://doi.org/10.1080/09537287.2020.1810762.
- Quan, Z.; Wu, A.; Keefe, M.; Qin, X.; Yu, J.; Suhr, J., Byun JH, Kim BS, Chou TW. Additive Manufacturing of Multi-directional Preforms for Composites: Opportunities and Challenges. Mater. Today. 2015, 18, 503–512. DOI: https://doi.org/10.1016/j.mattod.2015.05.001.
- Yakout, M.; Elbestawi, M. A. Additive Manufacturing of Composite Materials: An Overview. 6th Int. Conf. Virtual Mach. Process Technol. (VMPT), Montréal, 2017, p. 1–8. DOI: https://doi.org/10.1016/B978-0-12-803581-8.04165-5.
- Sierra Nossa, I.; Bohórquez, O.; Pertuz, A.; Sánchez Acevedo, H. G.; González-Estrada, O. A. Tensile Mechanical Properties of Composite Materials with Continuous Fiber Produced by Additive Manufacturing. J. Phys. Conf. Ser. 2019, 1386, 012008. DOI: https://doi.org/10.1088/1742-6596/1386/1/012008.
- Ibrahim, Y.; Elkholy, A.; Schofield, J. S.; Melenka, G. W.; Kempers, R. Effective Thermal Conductivity of 3D-printed Continuous Fiber Polymer Composites. Adv. Manuf. Polym. Compos. Sci. 2020, 6, 17–28. DOI: https://doi.org/10.1080/20550340.2019.1710023.
- Ferreira, I.; Madureira, R.; Villa, S.; de Jesus, A.; Machado, M.; Alves, J. L. Machinability of PA12 and Short Fibre–reinforced PA12 Materials Produced by Fused Filament Fabrication. Int. J. Adv. Manuf. Technol. 2020, 107, 885–903. DOI: https://doi.org/10.1007/s00170-019-04839-z.
- Wong, K. V.; Hernandez, A. A Review of Additive Manufacturing. ISRN Mech. Eng. 2012, 2012, 1–10. DOI: https://doi.org/10.5402/2012/208760.
- Zhong, W.; Li, F.; Zhang, Z.; Song, L.; Li, Z. Short Fiber Reinforced Composites for Fused Deposition Modeling. Mater. Sci. Eng. A. 2001, 301, 125–130. DOI: https://doi.org/10.1016/S0921-5093(00)01810-4.
- McIlroy, C.; Olmsted, P. D. Deformation of an Amorphous Polymer during the Fused-filament-fabrication Method for Additive Manufacturing. J. Rheol. (N Y). 2017, 61, 379–397. DOI: https://doi.org/10.1122/1.4976839.
- Li, N.; Li, Y.; Liu, S. Rapid Prototyping of Continuous Carbon Fiber Reinforced Polylactic Acid Composites by 3D Printing. J. Mater. Process. Technol. 2016, 238, 218–225. DOI: https://doi.org/10.1016/j.jmatprotec.2016.07.025.
- Akhoundi, B.; Behravesh, A. H.; Bagheri Saed, A. An Innovative Design Approach in Three-dimensional Printing of Continuous Fiber–reinforced Thermoplastic Composites via Fused Deposition Modeling Process: In-melt Simultaneous Impregnation. Proc. Inst. Mech. Eng. Part B. 2020, 234, 243–259. DOI: https://doi.org/10.1177/0954405419843780.
- Rimašauskas, M.; Kuncius, T.; Rimašauskienė, R. Processing of Carbon Fiber for 3D Printed Continuous Composite Structures. Mater. Manuf. Process. 2019, 34, 1528–1536. DOI: https://doi.org/10.1080/10426914.2019.1655152.
- Qiao, J.; Li, Y.; Li, L. Ultrasound-assisted 3D Printing of Continuous Fiber-reinforced Thermoplastic (FRTP) Composites. Addit. Manuf. 2019, 30, 100926. DOI: https://doi.org/10.1016/j.addma.2019.100926.
- Sánchez, D. M.; de la Mata, M.; Delgado, F. J.; Casal, V.; Molina, S. I. Development of Carbon Fiber Acrylonitrile Styrene Acrylate Composite for Large Format Additive Manufacturing. Mater. Des. 2020, 191, 108577. DOI: https://doi.org/10.1016/j.matdes.2020.108577.
- Velu, R.; Vaheed, N. M.; Venkatesan, C.; Raspall, F.; Krishnan, M. Experimental Investigation on Fabrication of Thermoset Prepreg Composites Using Automated Fibre Placement Process and 3D Printed Substrate. Procedia. CIRP. 2020, 85, 293–298. DOI: https://doi.org/10.1016/j.procir.2019.09.049.
- Melchels, F. P. W.; Feijen, J.; Grijpma, D. W. A Review on Stereolithography and Its Applications in Biomedical Engineering. Biomaterials. 2010, 31, 6121–6130. DOI: https://doi.org/10.1016/j.biomaterials.2010.04.050.
- Rafiee, M.; Farahani, R. D.; Therriault, D. Multi-Material 3D and 4D Printing: A Survey. Adv. Sci. 2020, 7, 1902307. DOI: https://doi.org/10.1002/advs.201902307.
- Zafar, M. Q.; Zhao, H. 4D Printing: Future Insight in Additive Manufacturing. Met. Mater. Int. 2020, 26, 564–585. DOI: https://doi.org/10.1007/s12540-019-00441-w.
- Shi, B.; Shang, Y.; Zhang, P.; Cuadros, A. P.; Qu, J.; Sun, B., Gu B, Chou TW, Fu KK. Dynamic Capillary-Driven Additive Manufacturing of Continuous Carbon Fiber Composite. Matter 2020, 2, 1594–1604. DOI: https://doi.org/10.1016/j.matt.2020.04.010.
- Hascoët, J. Y.; Authelin, O.; Rauch, M. A Generic Method to Realize Long Fibers Filled and Large Polymer Parts in Additive Manufacturing. J. Mach. Eng. 2020, 20, 107–116. DOI: https://doi.org/10.36897/jme/118217.
- Grunewald, S.; Arevo Labs Takes 3D Printing 3D with New 6-Axis Composite Part Additive Manufacturing Platform. 2015.
- Continous composites. 2020. https://www.continuouscomposites.com/technology (accessed Sept 10, 2020).
- Anisoprint. Composite Fiber Co-Extrusion 2020. https://anisoprint.com/?tech=show (accessed Sept 9, 2020).
- Luan, C.; Yao, X.; Zhang, C.; Fu, J.; Wang, B. Integrated Self-monitoring and Self-healing Continuous Carbon Fiber Reinforced Thermoplastic Structures Using Dual-material Three-dimensional Printing Technology. Compos. Sci. Technol. 2020, 188, 107986. DOI: https://doi.org/10.1016/j.compscitech.2019.107986.
- Anisoprint selfsensing structure 2020. https://anisoprint.com/self-sensing-composite-for-monitoring-critical-structures (accessed Sept 10, 2020).
- Cincinnati Incorporated. Big Area Additive Manufacturing 3D Printer. 2020. https://www.e-ci.com/baam (accessed Sept 9, 2020).
- Billah, K. M. M.; Lorenzana, F. A. R.; Martinez, N. L.; Wicker, R. B.; Espalin, D. Thermomechanical Characterization of Short Carbon Fiber and Short Glass Fiber-reinforced ABS Used in Large Format Additive Manufacturing. Addit. Manuf. 2020, 35. DOI: https://doi.org/10.1016/j.addma.2020.101299.
- Chang, B.; Li, X.; Parandoush, P.; Ruan, S.; Shen, C.; Lin, D. Additive Manufacturing of Continuous Carbon Fiber Reinforced Poly-ether-ether-ketone with Ultrahigh Mechanical Properties. Polym. Test. 2020, 88. DOI: https://doi.org/10.1016/j.polymertesting.2020.106563.
- Chacón, J. M.; Caminero, M. A.; Núñez, P. J.; García-Plaza, E.; García-Moreno, I.; Reverte, J. M. Additive Manufacturing of Continuous Fibre Reinforced Thermoplastic Composites Using Fused Deposition Modelling: Effect of Process Parameters on Mechanical Properties. Compos. Sci. Technol. 2019, 181, 107688. DOI: https://doi.org/10.1016/j.compscitech.2019.107688.
- Parandoush, P.; Tucker, L.; Zhou, C.; Lin, D. Laser Assisted Additive Manufacturing of Continuous Fiber Reinforced Thermoplastic Composites. Mater. Des. 2017, 131, 186–195. DOI: https://doi.org/10.1016/j.matdes.2017.06.013.
- O’Connor, H. J.; Dowling, D. P. Low-pressure Additive Manufacturing of Continuous Fiber-reinforced Polymer Composites. Polym. Compos. 2019, 40, 4329–4339. DOI: https://doi.org/10.1002/pc.25294.
- Nawafleh, N.; Celik, E. Additive Manufacturing of Short Fiber Reinforced Thermoset Composites with Unprecedented Mechanical Performance. Addit. Manuf. 2020, 33, 101109. DOI: https://doi.org/10.1016/j.addma.2020.101109.
- Yu, N.; Sun, X.; Wang, Z.; Zhang, D.; Li, J. Effects of Auxiliary Heat on Warpage and Mechanical Properties in Carbon fiber/ABS Composite Manufactured by Fused Deposition Modeling. Mater. Des. 2020, 195, 108978. DOI: https://doi.org/10.1016/j.matdes.2020.108978.
- Lanzl, L.; Wudy, K.; Drummer, D. The Effect of Short Glass Fibers on the Process Behavior of Polyamide 12 during Selective Laser Beam Melting. Polym. Test. 2020, 83, 106313. DOI: https://doi.org/10.1016/j.polymertesting.2019.106313.
- Ning, F.; Cong, W.; Qiu, J.; Wei, J.; Wang, S. Additive Manufacturing of Carbon Fiber Reinforced Thermoplastic Composites Using Fused Deposition Modeling. Compos. Part B. Eng. 2015, 80, 369–378. DOI: https://doi.org/10.1016/j.compositesb.2015.06.013.
- de Toro, E. V.; Sobrino, J. C.; Martínez, A. M.; Eguía, V. M.; Pérez, J. A. Investigation of a Short Carbon Fibre-reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM). Materials (Basel). 2020, 13, 672. DOI: https://doi.org/10.3390/ma13030672.
- Qingxiao, F.; Liming, K.; Duosheng, L.; Xinyuan, P.; Guobo, W.; Xiaoguang, Y. Additive manufacturing method of fiber-reinforced composite by using selective laser melting formation. CN111069603A. 2020.
- Mukerrem, C.; Fang, P.; Akron, U.; David, V. B., Tough High Impact Resistant 3d Printed Objects From Structured Filaments. US2020080237A1, 2020.
- William, C.; Felipe, F.-A.; James, L.; Daniel, T. Optimal Toolpath Generation System And Method For Additively Manufactured Composite Materials. US2020055252A1, 2020.
- Robert, D. A.; Jianguo, Z. Miniature Walking Robot With Soft Joints And Links. US2020039590A1. 2020.
- Lee, C.; Ryan, H.; Stéphane, J.; Jason, R.; William, S. Method For Manufacturing A Three-Dimensional Object From A Poly(Arylene Sulfide) Polymer. WO2020011990A1. 2020.
- Mahrokh, D.; Andreas, K.; Balaji, P.; Jose, S.-A. Biodegradable Polymer Blends For Manufacturing Medical Devices. WO2020002600A1. 2020.
- Congze, F.; Siyuan, L.; Feng, L.; Zhongde, S.; Dongdong, Y.; LI, Z. Three-dimensional composite material weaving and continuous fiber additive manufacturing composite forming method. CN110370630A. 2019.
- Congze, F.; Feng, L.; Xiaojun, L.; Zhongde, S.; Dongdong, Y.; LI, Z. Interlayer reinforced composite material 3D printing device. CN110370631A. 2019.
- Kunkun, F.; Yan, L.; Zhongsen, Z. Ultrasonic auxiliary impregnation composite material 3D printing device. CN110328843A. 2019.
- Congze, F.; Xiaojun, L.; Zhongde, S.; Dongdong, Y.; Li, Z. 3D printing path planning method of continuous fiber reinforced composite material. CN110001067A. 2019.
- ADAM, C.; Methods and Apparatus for Additive Manufacturing. US10336006B1, 2019.
- Dichen, L.; Meng, L.; Junfan, S.; Xiaoyong, T.; Weijun, Z. Additive manufacturing method of fiber rod-prearranged Z direction-reinforced continuous fiber composite material. CN109760336A. 2019.
- Congze, F.; Feng, L.; Xiaojun, L.; Zhongde, S.; Li, Z. Fiber enhanced composite material annularly coated printing nozzle. CN109551762A. 2019.
- Grigore, B.; Nicolae, B.; Paul, B.; Anca, L. M.; Marioara, M.; Cristina, P. Materials And Method For Manufacturing Customized Craniofacial Implants Of Glass-Fiber-Reinforced Composites. RO133074A2, 2019.
- Xilun, D.; Ka, Z.; Wuxiang, Z. Manufacturing method of multiple-dimension additive material for shaping of continuous fiber reinforced composite material structure. CN109228404A. 2019.
- Xiangxing, B.; Chong, J.; Junxian, L.; Qingcheng, M.; Yuanchang, S.; Lili, X. Continuous twisting fiber fused deposition 3D printing wire feed device and application. CN108527840A. 2018.
- Zhikun, L.; Feng, L.; Zhongde, S.; Xiaochuan, W.; Qun, Z. Additive Manufacturing Method For Interlayer-Strengthened Continuous Fibre Composite Material. CN106738891A. 2018.
- Dong, L.; Pedram, P. Additive Manufacturing Of Continuous Fiber Thermoplastic Composites. US2020061938A1. 2018.
- Mingjin, H.; Continuous fiber reinforced composite 3D (three-dimensional) printer. CN108437457A. 2018.
- Fangzhi, L.; Liang, M.; Zemin, W.; Hanchen, Y.; Xiaoyan, Z. Selective laser melting forming method and apparatus for continuous fiber reinforced composites and parts. CN108372658A. 2018.
- Mingjin, H.; Continuous fiber reinforced composite material 3D printer spray head and printer. CN108312507A. 2018.
- Congze, F.; Feng, L.; Zhongde, S.; Li, Z. Three-dimensional printing and forming method for continuous fiber reinforced composite material. CN108248015A. 2018.
- Haiman, X.; Tianwen, X.; Xiaoming, Z. Continuous fiber reinforced composite part forming equipment and forming method. CN108081601A. 2018.
- Xiu, L.; Hebao, W.; Zhou, X.; Xiong, Z. 3D printing forming method of composite material. CN107983958A. 2018.
- Mingjin, H.; Additive manufacturing apparatus of continuous fiber reinforced composite material. CN107139459A. 2017.
- Michael, B.; Material Deposition System For Additive Manufacturing. WO2017074540A1. 2017.
- Longqiu, L.; Guangbin, S.; Wenping, S.; Zhengfu, X.; Guangyu, Z.; Dekai, Z. Ultrasound-enhancement-based 3D printing spray nozzle for continuous-fiber-reinforced composite material. CN106553341A. 2017.
- Longqiu, L.; Tianlong, L.; Yingrui, L.; Wenping, S.; Zhengfu, X.; Guangyu, Z. Spray head applicable to continuous fiber reinforced composite material additive manufacturing. CN106493946A. 2017.
- Nanya, L.; Yingguang, L.; Shuting, L. 3D printing method for continuous fibre-reinforced thermoplastic resin matrix composite material, and printing head. CN106313496A. 2017.
- Rc, J.;. Feedstocks For Additive Manufacturing And Methods For Their Preparation And Use. US2016012935A1. 2016.
- Bogucki, G. R.; Hickman, G. J. S.; Hayes, M. W. Extruded deposition of fiber reinforced polymers. JP2016060204A. 2016.
- Burns, D. W.; Guckel, H.; Zook, J. D. Hybrid AM method and apparatus made therefrom. US20170057164A1. 2017.
- Mark, G. T.; Gozdz, A. S. Three dimensional printer for fiber reinforced composite filament fabrication. US9126367B1. 2015.
- Hegab, H. A.;. Design for Additive Manufacturing of Composite Materials and Potential Alloys: A Review. Manuf. Rev. 2016, 3, 11. DOI: https://doi.org/10.1051/mfreview/2016010.
- Caivano, R.; Tridello, A.; Paolino, D.; Chiandussi, G. Topology and Fibre Orientation Simultaneous Optimisation: A Design Methodology for Fibre-reinforced Composite Components. Proc. Inst. Mech. Eng. Part L. 2020, 234, 1267–1279. DOI: https://doi.org/10.1177/1464420720934142.
- Lovo, J. F. P.; Camargo, I. L.; de Araujo, L. A. O.; Fortulan, C. A. Mechanical Structural Design Based on Additive Manufacturing and Internal Reinforcement. Proc. Inst. Mech. Eng. Part C. 2020, 234, 417–426. DOI: https://doi.org/10.1177/0954406219878471.
- Liu, F.; Li, T.; Jiang, X.; Jia, Z.; Xu, Z.; Wang, L. The Effect of Material Mixing on Interfacial Stiffness and Strength of Multi-material Additive Manufacturing. Addit. Manuf. 2020, 36, 101502. DOI: https://doi.org/10.1016/j.addma.2020.101502.
- Xu, Z.; Ha, C. S.; Kadam, R.; Lindahl, J.; Kim, S.; Wu, H. F., Kunc V, Zheng X. Additive Manufacturing of Two-phase Lightweight, Stiff and High Damping Carbon Fiber Reinforced Polymer Microlattices. Addit. Manuf. 2020, 32, 101106. DOI: https://doi.org/10.1016/j.addma.2020.101106.
- Leary, M.; Merli, L.; Torti, F.; Mazur, M.; Brandt, M. Optimal Topology for Additive Manufacture: A Method for Enabling Additive Manufacture of Support-free Optimal Structures. Mater. Des. 2014, 63, 678–690. DOI: https://doi.org/10.1016/j.matdes.2014.06.015.
- Jiang, D.; Three dimensional topology optimization with orthotropic material orientation design for additive manufacturing structures. 2017. DOI: https://doi.org/10.13140/RG.2.2.20088.49924.
- Sathaye, A.; Bhattacharyya, I. Lightweighting of Automobile Hood Using Multistep Optimization for Composite Material. SAE Tech Pap. 2019-January, Maharashtra, India. 2019; DOI: https://doi.org/10.4271/2019-26-0168.
- Pellens, J.; Lombaert, G.; Michiels, M.; Craeghs, T.; Schevenels, M. Topology Optimization of Support Structure Layout in Metal-based Additive Manufacturing Accounting for Thermal Deformations. Struct. Multidiscip. Optim. 2020, 61, 2291–2303. DOI: https://doi.org/10.1007/s00158-020-02512-8.
- Hassani, V.; Khabazi, Z.; Mehrabi, H. A.; Gregg, C.; O’Brien, R. W. Rationalization Algorithm for a Topologically-optimized Multi-branch Node for Manufacturing by Metal Printing. J. Build. Eng. 2020, 29, 101146. DOI: https://doi.org/10.1016/j.jobe.2019.101146.
- Bendsøe, M. P.; Kikuchi, N. Generating Optimal Topologies in Structural Design Using a Homogenization Method. Comput. Methods. Appl. Mech. Eng. 1988, 71, 197–224. DOI: https://doi.org/10.1016/0045-7825(88)90086-2.
- Suzuki, K.; Kikuchi, N. A Homogenization Method for Shape and Topology Optimization. Comput. Methods. Appl. Mech. Eng. 1991, 93, 291–318. DOI: https://doi.org/10.1016/0045-7825(91)90245-2.
- Sundararajan, V. G.; Topology optimization for additive manufacturing of customized meso-structures using homogenization and parametric smoothing functions. 2010.
- Xie, Y. M.; Steven, G. P. A Simple Evolutionary Procedure for Structural Optimization. Comput. Struct. 1993, 49, 885–896. DOI: https://doi.org/10.1016/0045-7949(93)90035-C.
- Querin, O. M.; Steven, G. P.; Xie, Y. M. Evolutionary Structural Optimisation (ESO) Using a Bidirectional Algorithm. Eng. Comput. (Swansea, Wales). 1998, 15, 1031–1048. DOI: https://doi.org/10.1108/02644409810244129.
- Hoglund, R.; Smith, D. E. Non-isotropic Material Distribution Topology Optimization for Fused Deposition Modeling Products. Proc. - 26th Annu. Int. Solid Free. Fabr. Symp. - An Addit. Manuf. Conf. SFF 2015, Austin, United States, 2020, 888–903.
- Zhang, P.; Toman, J.; Yu, Y.; Biyikli, E.; Kirca, M.; Chmielus, M., To AC. Efficient Design-optimization of Variable-density Hexagonal Cellular Structure by Additive Manufacturing: Theory and Validation. J. Manuf. Sci. Eng. Trans. 2015, 137. DOI: https://doi.org/10.1115/1.4028724.
- Brackett, D.; Ashcroft, I.; Hague, R. Topology Optimization for Additive Manufacturing. 22nd Annu Int Solid Free Fabr Symp - An Addit Manuf Conf SFF 2011, Austin, United States. 2011:348–362.
- Rezaie, R.; Badrossamay, M.; Ghaie, A.; Moosavi, H. Topology Optimization for Fused Deposition Modeling Process. Procedia. CIRP. 2013, 6, 521–526. DOI: https://doi.org/10.1016/j.procir.2013.03.098.
- Gaynor, A. T.; Meisel, N. A.; Williams, C. B.; Guest, J. K. Multiple-Material Topology Optimization of Compliant Mechanisms Created via PolyJet Three-Dimensional Printing. J. Manuf. Sci. Eng. Trans. 2014, 136. DOI: https://doi.org/10.1115/1.4028439.
- Jia, H. P.; Jiang, C. D.; Li, G. P.; Mu, R. Q.; Liu, B.; Jiang, C. B. Topology Optimization of Orthotropic Material Structure. Mater. Sci. Forum. 2008, 575–578, 978–989. DOI: https://doi.org/10.4028/.scientific.net/MSF.575-578.978.
- Liu, K.; Tovar, A. An Efficient 3D Topology Optimization Code Written in Matlab. Struct. Multidiscip. Optim. 2014, 50, 1175–1196. DOI: https://doi.org/10.1007/s00158-014-1107-x.
- Hoglund, R.; Smith, D. E. Continuous Fiber Angle Topology Optimization for Polymer Fused Filament Fabrication. Solid Free. Fabr. 2016 Proc. 27th Annu. Int. Solid Free. Fabr. Symp. - An Addit. Manuf. Conf. SFF 2016, Austin, United States, 2016, 1078–1090.
- Jiang, D.; Hoglund, R.; Smith, D. Continuous Fiber Angle Topology Optimization for Polymer Composite Deposition Additive Manufacturing Applications. Fibers. 2019, 7, 14. DOI: https://doi.org/10.3390/fib7020014.
- Jiang, D.; Smith, D. E. Topology Optimization for 3D Material Distribution and Orientation in Additive Manufacturing. Solid Free. Fabr. 2017 Proc. 28th Annu. Int. Solid Free. Fabr. Symp. - An Addit. Manuf. Conf. SFF 2017, Austin, United States, 2020, p. 2236–49.
- Liu, J.; Ma, Y. A New Multi-material Level Set Topology Optimization Method with the Length Scale Control Capability. Comput. Methods. Appl. Mech. Eng. 2018, 329, 444–463. DOI: https://doi.org/10.1016/j.cma.2017.10.011.
- Huang, X.; Ye, C.; Wu, S.; Guo, K.; Mo, J. Sloping Wall Structure Support Generation for Fused Deposition Modeling. Int. J. Adv. Manuf. Technol. 2009, 42, 1074–1081. DOI: https://doi.org/10.1007/s00170-008-1675-2.
- Joe Lopes, A.; MacDonald, E.; Wicker, R. B. Integrating Stereolithography and Direct Print Technologies for 3D Structural Electronics Fabrication. Rapid. Prototyp. J. 2012, 18, 129–143. DOI: https://doi.org/10.1108/13552541211212113.
- Hassan, M. H.; Othman, A. R.; Kamaruddin, S. A Review on the Manufacturing Defects of Complex-shaped Laminate in Aircraft Composite Structures. Int. J. Adv. Manuf. Technol. 2017, 91, 4081–4094. DOI: https://doi.org/10.1007/s00170-017-0096-5.
- Di Fratta, C.; Danzi, M.; Gabathuler, V.; Zogg, M.; Ermanni, P. Approach to Optimize Combined Out-of-autoclave prepreg/LCM Process for Integrated Structures. Int. SAMPE Tech. Conf. 2012, 48(5), 40-46.
- Brillant, M.; Out-of-Autoclave Manufacturing of Complex Shape Composite Laminates. 2010.
- Pandey, R. K.; Sun, C. T. Mechanisms of Wrinkle Formation during the Processing of Composite Laminates. Compos. Sci. Technol. 1999, 59, 405–417. DOI: https://doi.org/10.1016/S0266-3538(98)00080-3.
- Hubert, P.; Poursartip, A. Aspects of the Compaction of Composite Angle Laminates: An Experimental Investigation. J. Compos. Mater. 2001, 35, 2–26. DOI: https://doi.org/10.1177/002199801772661849.
- Li, Y.; Li, M.; Zhang, Z.; Gu, Y. Numerical Analysis of Parametric Effects on Consolidation of Angle-bended Composite Laminates. Polym. Compos. 2009, 30, 1510–1516. DOI: https://doi.org/10.1002/pc.20723.
- Fernlund, G.; Griffith, J.; Courdji, R.; Poursartip, A. Experimental and Numerical Study of the Effect of Caul-sheets on Corner Thinning of Composite Laminates. Compos. Part A. Appl. Sci. Manuf. 2002, 33, 411–426. DOI: https://doi.org/10.1016/S1359-835X(01)00114-2.
- Xin, C.; Li, M.; Gu, Y.; Luo, J.; Zhang, Z. Study on the Resin Flow and Fiber Compaction of Tapered Composite Laminates during Autoclave Processing. J. Reinf. Plast. Compos. 2011, 30, 1399–1411. DOI: https://doi.org/10.1177/0731684411424334.
- Gu, Y.; Xin, C.; Li, M.; Cheng, Y.; Zhang, Z. Resin Pressure and Resin Flow inside Tapered Laminates during Zero-bleeding and Bleeding Processes. J. Reinf. Plast. Compos. 2012, 31, 205–214. DOI: https://doi.org/10.1177/0731684411434149.
- Xin, C. B.; Gu, Y. Z.; Li, M.; Luo, J.; Li, Y. X.; Zhang, Z. G. Experimental and Numerical Study on the Effect of Rubber Mold Configuration on the Compaction of Composite Angle Laminates during Autoclave Processing. Compos. Part A. Appl. Sci. Manuf. 2011, 42, 1353–1360. DOI: https://doi.org/10.1016/j.compositesa.2011.05.018.
- Xueming, W.; Fuyuan, X.; Min, L.; Zuoguang, Z. Influence of Tool Assembly Schemes and Integral Molding Technologies on Compaction of T-stiffened Skins in Autoclave Process. J. Reinf. Plast. Compos. 2010, 29, 1311–1322. DOI: https://doi.org/10.1177/0731684409102765.
- Brillant, M.; Hubert, P. Out-of-autoclave processing of complex shape laminates. Int SAMPE Symp Exhib. 2010.
- Naji, M. I.; Hoa, S. V. Curing of Thick Angle-Bend Thermoset Composite Part: Curing Cycle Effect on Thickness Variation and Fiber Volume Fraction. J. Reinf. Plast. Compos. 1999, 18, 702–723. DOI: https://doi.org/10.1177/073168449901800802.
- Rousseau, J.; Perreux, D.; Verdière, N. The Influence of Winding Patterns on the Damage Behaviour of Filament-wound Pipes. Compos. Sci. Technol. 1999, 59, 1439–1449. DOI: https://doi.org/10.1016/S0266-3538(98)00184-5.
- James, T. P.;. Method of making filament wound article. US3480499A. 1969. DOI: https://doi.org/10.1016/0010-4361(76)90185-3.
- Williams, B.; Shehata, E.; Rizkalla, S. H. Filament-Wound Glass Fiber Reinforced Polymer Bridge Deck Modules. J. Compos. Constr. 2003, 7, 266–273. DOI: https://doi.org/10.1061/(ASCE)1090-0268(2003)7:3(266).
- Polini, W.; Sorrentino, L. Influence of Winding Speed and Winding Trajectory on Tension in Robotized Filament Winding of Full Section Parts. Compos. Sci. Technol. 2005, 65, 1574–1581. DOI: https://doi.org/10.1016/j.compscitech.2005.01.007.
- Dickson, A. N.; Barry, J. N.; McDonnell, K. A.; Dowling, D. P. Fabrication of Continuous Carbon, Glass and Kevlar Fibre Reinforced Polymer Composites Using Additive Manufacturing. Addit. Manuf. 2017, 16, 146–152. DOI: https://doi.org/10.1016/j.addma.2017.06.004.
- Justo, J.; Távara, L.; García-Guzmán, L.; París, F. Characterization of 3D Printed Long Fibre Reinforced Composites. Compos. Struct. 2018, 185, 537–548. DOI: https://doi.org/10.1016/j.compstruct.2017.11.052.
- Caminero, M. A.; Chacón, J. M.; García-Moreno, I.; Reverte, J. M. Interlaminar Bonding Performance of 3D Printed Continuous Fibre Reinforced Thermoplastic Composites Using Fused Deposition Modelling. Polym. Test. 2018, 68, 415–423. DOI: https://doi.org/10.1016/j.polymertesting.2018.04.038.
- Caminero, M. A.; Chacón, J. M.; García-Moreno, I.; Rodríguez, G. P. Impact Damage Resistance of 3D Printed Continuous Fibre Reinforced Thermoplastic Composites Using Fused Deposition Modelling. Compos. Part B. Eng. 2018, 148, 93–103. DOI: https://doi.org/10.1016/j.compositesb.2018.04.054.
- Wickramasinghe, S.; Do, T.; Tran, P. FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments. Polymers (Basel). 2020, 12, 1–42. DOI: https://doi.org/10.3390/polym12071529.
- Soete, J.; Badoux, B.; Swolfs, Y.; Gorbatikh, L.; Wevers, M. Defect Detection in 3D Printed Carbon Fibre Composites Using X-ray Computed Tomography. 9th Conf. Ind. Comput. Tomogr. Padova, Italy (iCT 2019), 2019, p. 1–8.
- Goh, G. D.; Dikshit, V.; Nagalingam, A. P.; Goh, G. L.; Agarwala, S.; Sing, S. L., Wei J, Yeong WY. Characterization of Mechanical Properties and Fracture Mode of Additively Manufactured Carbon Fiber and Glass Fiber Reinforced Thermoplastics. Mater. Des. 2018, 137, 79–89. DOI: https://doi.org/10.1016/j.matdes.2017.10.021.
- Mirzendehdel, A. M.; Rankouhi, B.; Suresh, K. Strength-based Topology Optimization for Anisotropic Parts. Addit. Manuf. 2018, 19, 104–113. DOI: https://doi.org/10.1016/j.addma.2017.11.007.
- Straub, J.;. Initial Work on the Characterization of Additive Manufacturing (3D Printing) Using Software Image Analysis. Machines. 2015, 3, 55–71. DOI: https://doi.org/10.3390/machines3020055.
- Faes, M.; Abbeloos, W.; Vogeler, F.; Valkenaers, H.; Coppens, K.; Goedemé, T., Ferraris E. Process Monitoring of Extrusion Based 3D Printing via Laser Scanning. Conf. Proc. PMI 2016, 6, 363–367. DOI: https://doi.org/10.13140/2.1.5175.0081.
- Borish, M.; Post, B. K.; Roschli, A.; Chesser, P. C.; Love, L. J.; Gaul, K. T. Defect Identification and Mitigation via Visual Inspection in Large-Scale Additive Manufacturing. JOM. 2019, 71, 893–899. DOI: https://doi.org/10.1007/s11837-018-3220-6.
- Dinwiddie, R. B.; Love, L. J.; Rowe, J. C. Real-time Process Monitoring and Temperature Mapping of a 3D Polymer Printing Process. Proceedings of SPIE - The International Society for Optical Engineering 2013, 8705, 87050L. DOI:https://doi.org/10.1117/12.1518454.