Experimental investigation on friction formation during slot milling of Nimonic263

References

• Mittal, R. K.; Kulkarni, S.; Singh, R. Characterization of Lubrication Sensitivity on Dynamic Stability in High-Speed Micromilling of Ti–6Al–4V via a Novel Numerical Scheme. Int. J. Mech. Sci. 2018, 142-143, 51–65. DOI: 10.1016/j.ijmecsci.2018.04.038.
   Web of Science ®Google Scholar
• Davoodi, B.; Tazehkandi, A. H. Experimental Investigation and Optimization of Cutting Parameters in Dry and Wet Machining of Aluminium Alloy 5083 in order to Remove Cutting Fluid. J. Cleaner Prod. 2014, 68, 234–242. DOI: 10.1016/j.jclepro.2013.12.056.
   Web of Science ®Google Scholar
• Gowthaman, S.; Jagadeesha, T. Influence of Radial Rake Angle and Cutting Conditions on Friction during End Milling of Nimonic 263. Int. J. Adv. Manuf. Technol. 2020, 109(1–2), 247–260. DOI: 10.1007/s00170-020-05682-3.
   Web of Science ®Google Scholar
• Jun, M. B.; Joshi, S. S.; DeVor, R. E.; Kapoor, S. G. An Experimental Evaluation of an Atomization Based Cutting Fluid Application System for Micromachining. ASME J. Manuf. Sci. Eng. 2008, 130(3), 031118. DOI: 10.1115/1.2738961.
   Web of Science ®Google Scholar
• Weinert, K.; Inasaki, I.; Sutherland, J. W.; Wakabayashi, T. Dry Machining and Minimum Quantity Lubrication. CIRP Ann. Manuf. Technol. 2004, 53(2), 511–537.
   Web of Science ®Google Scholar
• Sun, J.; Wong, Y. S.; Rahman, M.; Wang, Z. G.; Neo, K. S.; Tan, C. H.; Onozuka, H. Effects of Coolant Supply Methods and Cutting Conditions on Tool Life in End Milling Titanium Alloy. Mach. Sci. Technol. 2006, 10(3), 355–370. DOI: 10.1080/1010340600902181.
   Web of Science ®Google Scholar
• Vazquez, E.; Gomar, J.; Ciurana, J.; Rodriguez, C. A. Analyzing Effects of Cooling and Lubrication Conditions in Micromilling of Ti–6Al–4V. J. Cleaner Prod. 2014, 87, 906–913. DOI: 10.1016/j.jclepro.2014.10.016.
   Web of Science ®Google Scholar
• Wang, Z. G.; Rahman, M.; Wong., Y. S.; Neo, K. S.; Sun, J.; Tan, C. H.; Onozuka, H. Study on Orthogonal Turning of Titanium Alloys with Different Coolant Supply Strategies. Int. J. Adv. Manuf. Technol. 2009, 42(7), 621–632. DOI: 10.1007/s00170-008-1627-x.
   Web of Science ®Google Scholar
• Astakhov, V. P.;. Metal Cutting Theory Foundations of Near-Dry (MQL) Machining. Int. J. Mach. Mach .Mater. 2010, 7(1/2), 1–16. DOI: 10.1504/IJMMM.2010.029843.
   Google Scholar
• Byrne, G.; Dornfeld, D.; Denkena, B. Advancing Cutting Technology. CIRP Ann. Manuf. Technol. 2003, 52(2), 483–507. DOI: 10.1016/S0007-8506(07)60200-5.
   Web of Science ®Google Scholar
• Liu, Z. Q.; Chen, M.; An, Q. L. Investigation of Friction in End-Milling of Ti-6Al-4V under Different Green Cutting Conditions. Int. J. Adv. Manuf. Technol. 2015, 78(5–8), 1181–1192. DOI: 10.1007/s00170-014-6730-6.
   Web of Science ®Google Scholar
• Balamurugan, K.;. Metrological Changes in Surface Profile, Chip, and Temperature on End Milling of M2HSS Die Steel. Int. J. Mach. Mach. Mater. 2020, 22(6), 443–463. DOI: 10.1504/IJMMM.2020.10033215.
   Google Scholar
• Gowthaman, S.; Jagadeesha, T. Experimental Investigation of Surface Morphological Changes during End Milling of Nimonic 263. Surf. Topogr. Metrol. Prop. 2019, 7, 045018. DOI: 10.1088/2051-672X/ab5036.
   Web of Science ®Google Scholar
• Jebaraj, M.; Pradeep Kumar, M.; Yuvaraj, N.; Rahman, G. M. Experimental Study of the Influence of the Process Parameters in the Milling of Al6082-T6. Mater. Manuf. Process. 2018, 34(12), 142761–142767. DOI: 10.1080/10426914.2019.1594271.
   Web of Science ®Google Scholar
• Gowthaman, S.; Jagadeesha, T. Comparative Studies of Variation in End Mill Radial Rake Angle and Cutting Conditions on Cutting Force and Surface Integrity during Machining of Nimonic 263. Mater. Res. Express. 2019, 7(3), 036503. DOI: 10.1088/2053-1591/ab7ab9.
   Web of Science ®Google Scholar
• Sahoo, P.; Patra, K.; Singh, V. K.; Gupta, M. K.; Song, Q.; Mia, M.; Pimenov, D. Influences of TiAlN Coating and Limiting Angles of Flutes on Prediction of Cutting Forces and Dynamic Stability in Micro Milling of Die Steel (P-20). J. Mater. Process. Technol. 2019, 278, 116500. DOI: 10.1016/j.jmatprotec.
   Web of Science ®Google Scholar
• Sivaiah, P.; Chakradhar, D. Influence of Cryogenic Coolant on Turning Performance Characteristics: A Comparison with Wet Machining. Mater. Manuf. Process. 2017, 32(13), 1475–1485. DOI: 10.1080/10426914.2016.1269920.
   Web of Science ®Google Scholar
• Nandy, A. K.; Gowrishankar, M. C.; Paul, S. Some Studies on High Pressure Cooling in Turning of Ti–6Al–4V. Int. J. Mach. Tool Manuf. 2009, 49(2), 182–198. DOI: 10.1016/j.ijmachtools.2008.08.008.
   Web of Science ®Google Scholar
• Rahman, M.; Wang, Z. G.; Wong, Y. S. A.; Review on High-Speed Machining of Titanium Alloys. JSME Int J Ser .C. 2006, 491, 11–20. DOI:10.1299/jsmec.49.11.
   Google Scholar
• Koyee, R. D.; Eisseler, R.; Schmauder, S. Application of Taguchi Coupled Fuzzy Multi Attribute Decision Making (FMADM) for Optimizing Surface Quality in Turning Austenitic and Duplex Stainless Steels. Measurement. 2014, 58, 375–386. DOI: 10.1016/j.measurement.2014.09.015.
   Web of Science ®Google Scholar
• Wang, B.; Liu, Z.; Yang, Q. Investigations of Yield Stress, Fracture Toughness and Energy Distribution in High Speed Orthogonal Cutting. Int. J. Mach. Tools Manuf. 2013, 73, 1–8. DOI: 10.1016/j.ijmachtools.2013.05.007.
   Web of Science ®Google Scholar
• Tawakoli, T.; Hadad, M. J.; Sadeghi, M. H. Influence of Oil Mist Parameters on Minimum Quantity Lubrication-MQL Grinding Process. Int. J. Mach. Tool. Manu. 2010, 50(6), 521–531. DOI: 10.1016/j.ijmachtools.2010.03.005.
   Web of Science ®Google Scholar
• Altintas, Y.; Eynian, M. ;.; Onozuka, H. Identification of Dynamic Cutting Force Coefficients and Chatter Stability with Process Damping. CIRP Ann. Manuf. Technol. 2008, 57(1), 371–374. DOI: 10.1016/j.cirp.2008.03.048.
   Web of Science ®Google Scholar
• Sharma, V. S.; Fromentin, G.; Poulachon, G.; Brendle, R.; Investigation of Tool Geometry Effect and Penetration Strategies on Cutting Forces during Thread Milling. Int J Adv Manuf. Tech. 2014, 745–8, 963–971. DOI:10.1007/s00170-014-6040-z.
   Web of Science ®Google Scholar
• Reddy, P. G.; Gowthaman, S.; Jagadeesha, T. Optimization of Cutting Parameters Based on Surface Roughness and Cutting Force during End Milling of Nimonic C-263 Alloy. IOP Conf. Ser. Mater. Sci. Eng. 2020, 912(3), 032020. DOI: 10.1088/1757-899X/912/3/032020.
   Google Scholar
• Hq, L.; Shi, Y. C. A. Comprehensive Dynamic End Milling Simulation Model. J. Manuf. Sci. Eng. 2006, 128(1), 86–95. DOI: 10.1115/1.2035694.
   Web of Science ®Google Scholar
• Wang, B.; Liu, Z.; Song, Q.; An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy Inconel 718. Int. J. Of Precis. Eng. And Manuf.-Green Tech. 2019, 71, 35–51. DOI:10.1007/s40684-019-00125-1.
   Web of Science ®Google Scholar
• Bartarya, G.; Choudhury, S. K. A. Methodology to Estimate the Forces on the Tool Insert in Finish Hard Turning. Int. J. Mach. Mach .Mater. 2012, 11, 280–296. DOI: 10.1504/IJMMM.2012.046887.
   Google Scholar
• Sahoo, P.; Patra, K.; Szalay, T.; Dyakonov, A. A. Determination of Minimum Uncut Chip Thickness and Size Effects in Micro-Milling of P-20 Die Steel Using Surface Quality and Process Signal Parameters. Int. J. Adv. Manuf. Technol. 2020, 106(11–12), 4675–4691. DOI: 10.1007/s00170-020-04926-6.
   Web of Science ®Google Scholar
• Rao, S.; Shanmugam, M. S. Analytical Modeling of Micro End-Milling Forces with Edge Radius and Material Strengthening Effects. Mach. Sci. Technol. 2012, 16(2), 205–227. DOI: 10.1080/10910344.2012.673966.
   Web of Science ®Google Scholar