References
- Tamizharasan, T.; Selvaraj, T.; Haq, A. N. Analysis of Tool Wear and Surface Finish in Hard Turning. The International Journal of Advanced Manufacturing Technology. 2006, 28(7–8), 671–679. Published online. DOI: https://doi.org/10.1007/s00170-004-2411-1.
- EI-Hofy,;.Advanced Machining Processes Nontraditional and Hybrid Machining Processes.; 2005.
- Ning, F.; Cong, W. Ultrasonic Vibration-assisted (UV-A) Manufacturing Processes: State of the Art and Future Perspectives. J. Manuf. Process. 2020, 51, 174–190. Published online. DOI: https://doi.org/10.1016/j.jmapro.2020.01.028.
- Tao, G.; Ma, C.; Bai, L.; Shen, X.; Zhang, J. Feed-direction Ultrasonic Vibration−assisted Milling Surface Texture Formation. Mater. Manuf. Process. 2017, 32(2), 193–198. Published online. DOI: https://doi.org/10.1080/10426914.2016.1198029.
- Shen, X. H.; Shi, Y. L.; Zhang, J. H.; Zhang, Q. J.; Tao, G. C.; Bai, L. J. Effect of Process Parameters on Micro-textured Surface Generation in Feed Direction Vibration Assisted Milling. Int. J. Mech. Sci. 2020, 167, 105267. Published online. DOI: https://doi.org/10.1016/j.ijmecsci.2019.105267.
- Tao, G.; Zhang, J.; Shen, X.; Bai, L.; Ma, C.; Wang, J. Feasibility Study on Ultrasonic Vibration Assisted Milling for Squamous Surface. Procedia CIRP. 2016, 42, 847–852. DOI: https://doi.org/10.1016/j.procir.2016.03.006.
- Chu, N. H.; Du, N. V.; Ngo, Q. H. Machinability Enhancements of Ultrasonic-assisted Deep Drilling of Aluminum Alloys. Mach. Sci. Technol. Published online. 2020. DOI: https://doi.org/10.1080/10910344.2019.1636267.
- Verma, G. C.; Pandey, P. M. Machining Forces in Ultrasonic-vibration Assisted End Milling. Ultrasonics 2019, 94, 350–363. Published online. DOI: https://doi.org/10.1016/j.ultras.2018.07.004.
- Balogun, V. A.; Mativenga, P. T. Specific Energy Based Characterization of Surface Integrity in Mechanical Machining. Procedia Manuf. 2017, 7, 290–296. Published online. DOI: https://doi.org/10.1016/j.promfg.2016.12.072.
- Öztürk, B.; Kara, F. Calculation and Estimation of Surface Roughness and Energy Consumption in Milling of 6061 Alloy. Advances in Materials Science and Engineering 2020, 2020, 1–12. Published online. DOI: https://doi.org/10.1155/2020/5687951.
- Bhattacharya, A.; Das, S.; Majumder, P.; Batish, A. Estimating the Effect of Cutting Parameters on Surface Finish and Power Consumption during High Speed Machining of AISI 1045 Steel Using Taguchi Design and ANOVA. Prod. Eng. 2009, 3(1), 31–40. Published online. DOI: https://doi.org/10.1007/s11740-008-0132-2.
- Wang, X.; Zhang, Q. Role of Surface Roughness in the Wettability, Surface Energy and Flotation Kinetics of Calcite. Powder Technol. 2020, 371, 55–63. Published online. DOI: https://doi.org/10.1016/j.powtec.2020.05.081.
- Singh, M.; Rs, R.; Purohit, R.; Krishnkant, S. Development and Analysis of Al-Matrix Nano Composites Fabricated by Ultrasonic Assisted Squeeze Casting Process. Mater. Today Proc. 2015. DOI: https://doi.org/10.1016/j.matpr.2015.07.146.
- Li, P.; He, J.; Liu, Q.;, et al. Evaluation of Forming Forces in Ultrasonic Incremental Sheet Metal Forming. Aerosp. Sci. Technol. 2017, 66, 92–102. Published online. DOI: https://doi.org/10.1016/j.ast.2016.12.028.
- Djavanroodi, F.; Ahmadian, H.; Koohkan, K.; Naseri, R. Ultrasonic assisted-ECAP. Ultrasonics. 2013, 53(6), 1089–1096. Published online. DOI: https://doi.org/10.1016/j.ultras.2013.02.003.
- Wu, C. S.; Zhao, C. Y.; Zhang, C.; Li, Y. F Ultrasonic Vibration-assisted Keyholing Plasma Arc Welding. Weld. J. Published online 2017. 96, welding journal 279-s - 286-s.
- Babitsky, V. I.; Kalashnikov, A. N.; Meadows, A.; Wijesundara, A. A. H. P. Ultrasonically Assisted Turning of Aviation Materials. J. Mater. Process. Technol. 2003, 132(1–3), 157–167. Published online. DOI: https://doi.org/10.1016/S0924-0136(02)00844-0.
- Mitrofanov, A. V.; Babitsky, V. I.; Silberschmidt, V. V. Finite Element Analysis of Ultrasonically Assisted Turning of Inconel 718. J. Mater. Process. Technol. 2004, 153-154, 233–239. Published online. DOI: https://doi.org/10.1016/j.jmatprotec.2004.04.299.
- Skoczypiec, S.;. Research on Ultrasonically Assisted Electrochemical Machining Process. Int. J. Adv. Manuf. Technol. 2011, 52(5–8), 565–574. Published online. DOI: https://doi.org/10.1007/s00170-010-2774-4.
- Zhang, C.; Guo, P.; Ehmann, K. F.; Li, Y. Turning of Microgrooves Both with and without Aid of Ultrasonic Elliptical Vibration. Mater. Manuf. Process. 2015, 30(8), 1001–1009. Published online. DOI: https://doi.org/10.1080/10426914.2015.1004692.
- Tan, R.; Zhao, X.; Zhang, S.;, et al. Study on Ultra-precision Processing of Ti-6Al-4V with Different Ultrasonic Vibration-assisted Cutting Modes. Mater. Manuf. Process. 2019, 34(12), 1380–1388. DOI: https://doi.org/10.1080/10426914.2019.1660788. Published online.
- Kumar, S.; Dvivedi, A. On Effect of Tool Rotation on Performance of Rotary Tool Micro-ultrasonic Machining. Mater. Manuf. Process. 2019, 34(5), 475–486. Published online. DOI: https://doi.org/10.1080/10426914.2018.1512130.
- Zou, L.; Huang, Y.; Zhou, M.; Duan, L. Investigation on Diamond Tool Wear in Ultrasonic Vibration-assisted Turning Die Steels. Mater. Manuf. Process. 2017, 32(13), 1505–1511. Published online. DOI: https://doi.org/10.1080/10426914.2017.1291958.
- Zou, P.; Xu, Y.; He, Y.; Chen, M.; Wu, H. Experimental Investigation of Ultrasonic Vibration Assisted Turning of 304 Austenitic Stainless Steel. Shock Vib. 2015, 2015, 1–19. Published online. DOI: https://doi.org/10.1155/2015/817598.
- Zhong, Z. W.; Lin, G. Ultrasonic Assisted Turning of an Aluminium-based Metal Matrix Composite Reinforced with SiC Particles. Int. J. Adv. Manuf. Technol. 2006, 27(11–12), 1077–1081. Published online. DOI: https://doi.org/10.1007/s00170-004-2320-3.
- Babitsky, V. I.; Mitrofanov, A. V.; Silberschmidt, V. V. Ultrasonically Assisted Turning of Aviation Materials: Simulations and Experimental Study. Ultrasonics. 2004, 42(1–9), 81–86. DOI: https://doi.org/10.1016/j.ultras.2004.02.001.
- Silberschmidt, V. V.; Mahdy, S. M. A.; Gouda, M. A.; Naseer, A.; Maurotto, A.; Roy, A. Surface-roughness Improvement in Ultrasonically Assisted Turning. Procedia CIRP. 2014, 13, 49–54. DOI: https://doi.org/10.1016/j.procir.2014.04.009.
- Mitrofanov, A. V.; Babitsky, V. I.; Silberschmidt, V. V. Finite Element Simulations of Ultrasonically Assisted Turning. Comput. Mater. Sci. 2003, 28(3–4), 645–653. DOI: https://doi.org/10.1016/j.commatsci.2003.08.020.
- Zhang, C.; Guo, P.; Ehmann, K. F.; Li, Y. Effects of Ultrasonic Vibrations in Micro-groove Turning. Ultrasonics 2016, 67, 30–40. Published online. DOI: https://doi.org/10.1016/j.ultras.2015.12.016.
- Patil, S.; Joshi, S.; Tewari, A.; Joshi, S. S. Modelling and Simulation of Effect of Ultrasonic Vibrations on Machining of Ti6Al4V. Ultrasonics. 2014, 54(2), 694–705. Published online. DOI: https://doi.org/10.1016/j.ultras.2013.09.010.
- Sharma, V.; Pandey, P. M. Recent Advances in Ultrasonic Assisted Turning: A Step Towards Sustainability. Cogent Eng. 2016, 3(1), 1222776. Published online. DOI: https://doi.org/10.1080/23311916.2016.1222776.
- Pujana, J.; Rivero, A.; Celaya, A.; Ln, L. D. L. Analysis of Ultrasonic-assisted Drilling of Ti6Al4V. Int. J. Mach. Tools Manuf. 2009, 49(6), 500–508. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2008.12.014.
- Kavad, B. V.; Pandey, A. B.; Tadavi, M. V.; Jakharia, H. C. A Review Paper on Effects of Drilling on Glass Fiber Reinforced Plastic. Procedia Technol. 2014, 14, 457–464. Published online. DOI: https://doi.org/10.1016/j.protcy.2014.08.058.
- Amini, S.; Soleimani, M.; Paktinat, H.; Lotfi, M. Effect of Longitudinal−torsional Vibration in Ultrasonic-assisted Drilling. Mater. Manuf. Process. 2017, 32(6), 616–622. Published online. DOI: https://doi.org/10.1080/10426914.2016.1198027.
- Azarhoushang, B.; Akbari, J. Ultrasonic-assisted Drilling of Inconel 738-LC. Int. J. Mach. Tools Manuf. 2007, 47(7–8), 1027–1033. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2006.10.007.
- Liao, Y. S.; Chen, Y. C.; Lin, H. M. Feasibility Study of the Ultrasonic Vibration Assisted Drilling of Inconel Superalloy. International Journal of Machine Tools and Manufacture. 2007, 47(12–13), 1988–1996. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2007.02.001.
- Mehbudi, P.; Baghlani, V.; Akbari, J.; Bushroa, A. R.; Mardi, N. A. Applying Ultrasonic Vibration to Decrease Drilling-induced Delamination in GFRP Laminates. Procedia CIRP. 2013, 6, 577–582. DOI: https://doi.org/10.1016/j.procir.2013.03.097.
- Chang, S. S. F.; Bone, G. M. Burr Size Reduction in Drilling by Ultrasonic Assistance. Robot. Comput. Integr. Manuf. 2005, 21(4–5), 442–450. DOI: https://doi.org/10.1016/j.rcim.2004.11.005.
- Alam, K.; Mitrofanov, A. V.; Silberschmidt, V. V. Experimental Investigations of Forces and Torque in Conventional and Ultrasonically-assisted Drilling of Cortical Bone. Med. Eng. Phys. 2011, 33(2), 234–239. Published online. DOI: https://doi.org/10.1016/j.medengphy.2010.10.003.
- Ma, M.; Ma, S.; Nr, W.; Ay, Y.; Kf, G. Performance of an Ultrasonic-assisted Drilling Module. Int. J. Adv. Manuf. Technol. Published online. 2018. DOI: https://doi.org/10.1007/s00170-017-0495-7.
- Li, X.; Meadows, A.; Babitsky, V.; Parkin, R. Experimental Analysis on Autoresonant Control of Ultrasonically Assisted Drilling. Mechatronics. 2015, 29, 57–66. DOI: https://doi.org/10.1016/j.mechatronics.2015.05.006.
- Alam, K.; Qamar, S. Z. Ultrasonically Assisted Bone Drilling—effect of Process Parameters on Delamination. Materials and Manufacturing Processes. 2018, 33(16), 1894–1898. Published online. DOI: https://doi.org/10.1080/10426914.2018.1476768.
- Shen, X. H.; Zhang, J. H.; Li, H.; Wang, J. J.; Wang, X. C. Ultrasonic Vibration-assisted Milling of Aluminum Alloy. Int. J. Adv. Manuf. Technol. Published online. 2012. DOI: https://doi.org/10.1007/s00170-011-3882-5.
- Kuo, K. L.; Tsao, C. C. Rotary Ultrasonic-assisted Milling of Brittle Materials. Trans. Nonferrous Met. Soc. China 2012, 22, s793–s800. (English Ed. Published online. DOI: https://doi.org/10.1016/S1003-6326(12)61806-8.
- Lian, H.; Guo, Z.; Huang, Z.; Tang, Y.; Song, J. Experimental Research of Al6061 on Ultrasonic Vibration Assisted Micro-milling. Procedia CIRP. 2013, 6, 561–564. DOI: https://doi.org/10.1016/j.procir.2013.03.056.
- Marcel, K.; Marek, Z.; Jozef, P. Investigation of Ultrasonic Assisted Milling of Aluminum Alloy AlMg4.5Mn. Procedia Engineering. 2014, 69, 1048–1053. DOI: https://doi.org/10.1016/j.proeng.2014.03.089.
- Shen, X. H.; Zhang, J.; Xing, D. X.; Zhao, Y. A Study of Surface Roughness Variation in Ultrasonic Vibration-assisted Milling. Int. J. Adv. Manuf. Technol. Published online. 2012. DOI: https://doi.org/10.1007/s00170-011-3399-y.
- Xing, D.; Zhang, J.; Shen, X.; Zhao, Y.; Wang, T. Tribological Properties of Ultrasonic Vibration Assisted Milling Aluminium Alloy Surfaces. Procedia CIRP. 2013, 6, 539–544. DOI: https://doi.org/10.1016/j.procir.2013.03.008.
- Noma, K.; Takeda, Y.; Aoyama, T.; Kakinuma, Y.; Hamada, S. High-precision and High-efficiency Micromachining of Chemically Strengthened Glass Using Ultrasonic Vibration. Procedia CIRP. 2014, 14, 389–394. DOI: https://doi.org/10.1016/j.procir.2014.03.107.
- Suárez, A.; Veiga, F.; Lnl, D. L.; Polvorosa, R.; Lutze, S.; Wretland, A. Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718. J. Mater. Eng. Perform. 2016, 25(11), 5076–5086. Published online. DOI: https://doi.org/10.1007/s11665-016-2343-6.
- Siddiq, A.; El Sayed, T. Ultrasonic-assisted Manufacturing Processes: Variational Model and Numerical Simulations. Ultrasonics. 2012, 52(4), 521–529. Published online. DOI: https://doi.org/10.1016/j.ultras.2011.11.004.
- Amini, S.; Hosseinpour Gollo, A.; Paktinat, H. An Investigation of Conventional and Ultrasonic-assisted Incremental Forming of Annealed AA1050 Sheet. Int. J. Adv. Manuf. Technol. 2017, 90(5–8), 1569–1578. Published online. DOI: https://doi.org/10.1007/s00170-016-9458-7.
- Hung, J. C.; Lin, C. C. Investigations on the Material Property Changes of Ultrasonic-vibration Assisted Aluminum Alloy Upsetting. Mater. Des. Published online. 2013. DOI: https://doi.org/10.1016/j.matdes.2012.07.021.
- Vahdati, M.; Mahdavinejad, R.; Amini, S. Investigation of the Ultrasonic Vibration Effect in Incremental Sheet Metal Forming Process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2017, 231(6), 971–982. Published online. DOI: https://doi.org/10.1177/0954405415578579.
- Liu, Y.; Suslov, S.; Han, Q.; Hua, L.; Xu, C. Comparison between Ultrasonic Vibration-assisted Upsetting and Conventional Upsetting. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. Published online. 2013. DOI: https://doi.org/10.1007/s11661-013-1651-9.
- Sedaghat, H.; Xu, W.; Zhang, L. Ultrasonic Vibration-assisted Metal Forming: Constitutive Modelling of Acoustoplasticity and Applications. J. Mater. Process. Technol. 2019, 265, 122–129. Published online. DOI: https://doi.org/10.1016/j.jmatprotec.2018.10.012.
- Lou, Y.; Liu, X.; He, J.; Long, M. Ultrasonic-assisted Extrusion of ZK60 Mg Alloy Micropins at Room Temperature. Ultrasonics 2018, 83, 194–202. Published online. DOI: https://doi.org/10.1016/j.ultras.2017.03.012.
- Han, G.; Li, K.; Peng, Z.; Jin, J.; Sun, M.; Wang, X. A New Porous Block Sonotrode for Ultrasonic Assisted Micro Plastic Forming. Int. J. Adv. Manuf. Technol. 2017, 89(5–8), 2193–2202. Published online. DOI: https://doi.org/10.1007/s00170-016-9179-y.
- Kumar, S.; Wu, C. S.; Padhy, G. K.; Ding, W. Application of Ultrasonic Vibrations in Welding and Metal Processing: A Status Review. J. Manuf. Process. Published online. 2017. DOI: https://doi.org/10.1016/j.jmapro.2017.02.027.
- Yang, J.; Cao, B. Investigation of Resistance Heat Assisted Ultrasonic Welding of 6061 Aluminum Alloys to Pure Copper. Mater. Des. Published online. 2015. DOI: https://doi.org/10.1016/j.matdes.2015.02.028.
- Sun, Q. J.; Cheng, W. Q.; Liu, Y. B.; Wang, J. F.; Cai, C. W.; Feng, J. C. Microstructure and Mechanical Properties of Ultrasonic Assisted Underwater Wet Welding Joints. Materials & Design 2016, 103, 63–70. Published online. DOI: https://doi.org/10.1016/j.matdes.2016.04.019.
- Chen, Q.; Ge, H.; Yang, C.; Lin, S.; Fan, C. Study on Pores in Ultrasonic-assisted TIG Weld of Aluminum Alloy. Metals (Basel) Published online. 2017. DOI: https://doi.org/10.3390/met7020053.
- Wu, C. S.; Zhao, C. Y.; Zhang, C.; Li, Y. F. Ultrasonic Vibration-assisted Keyholing Plasma Arc Welding. Weld. J. Published online. 2017, 96, 279-s-286-s.
- Rostamiyan, Y.; Seidanloo, A.; Sohrabpoor, H.; Teimouri, R. Experimental Studies on Ultrasonically Assisted Friction Stir Spot Welding of AA6061. Archives of Civil and Mechanical Engineering. 2015, 15(2), 335–346. Published online. DOI: https://doi.org/10.1016/j.acme.2014.06.005.
- Eslamian, M.; Zabihi, F. Ultrasonic Substrate Vibration-Assisted Drop Casting (SVADC) for the Fabrication of Photovoltaic Solar Cell Arrays and Thin-Film Devices. Nanoscale Res. Lett. 2015, 10(1), Published online. DOI: https://doi.org/10.1186/s11671-015-1168-9.
- Wang, X. J.; Wang, N. Z.; Wang, L. Y.; et al. Processing, Microstructure and Mechanical Properties of micro-SiC Particles Reinforced Magnesium Matrix Composites Fabricated by Stir Casting Assisted by Ultrasonic Treatment Processing. Mater. Des. Published online 2014. doi:https://doi.org/10.1016/j.matdes.2014.01.022
- Alba-Baena, N.; Eskin, D. Kinetics of Ultrasonic Degassing of Aluminum Alloys. 2016, Minerals, Metals and Materials Series. Light metals. 2013, DOI: https://doi.org/10.1007/978-3-319-65136-1_162.
- Jia, X. Y.; Liu, S. Y.; Gao, F. P.; Zhang, Q. Y.; Li, W. Z.; Magnesium Matrix Nanocomposites Fabricated by Ultrasonic Assisted Casting. International Journal of Cast Metals Research. 2009, 221–4, 196–199. DOI:https://doi.org/10.1179/136404609X367704.
- Mousavi, S. A. A. A.; Feizi, H.; Madoliat, R. Investigations on the Effects of Ultrasonic Vibrations in the Extrusion Process. J. Mater. Process. Technol. 2007, 187-188, 657–661. Published online. DOI: https://doi.org/10.1016/j.jmatprotec.2006.11.168.
- Liu, Y.; Cheng, T.; Hua, L.; Mao, H. Research on the Effect of Ultrasonic Vibration on the Roll-over during the Fine Blanking Process. J. Mech. Sci. Technol. Published online. 2017. DOI: https://doi.org/10.1007/s12206-017-0135-z.
- Hung, J. C.; Huang, C. C. Evaluation of Friction in Ultrasonic Vibration-assisted Press Forging Using Double Cup Extrusion Tests. Int. J. Precis. Eng. Manuf. 2012, 13(12), 2103–2108. Published online. DOI: https://doi.org/10.1007/s12541-012-0278-x.
- Daniel Bss, G. U. P. T. A. R.; Gp, C. H. A. U. D. H. A. R. I. Ultrasonic Assisted Casting of Aluminum Matrix Composite. Int J Appl Res Mech Eng. Published online 2013. . DOI: https://doi.org/10.47893/ijarme.2013.1094.
- Koli, K. D.; Agnihotri, G.; Purohit, R. Influence of Ultrasonic Assisted Stir Casting on Mechanical Properties of Al6061-nano Al2O3 Composites. Mater. Today Proc. 2015. DOI: https://doi.org/10.1016/j.matpr.2015.07.286.
- Chen, Q.; Lin, S.; Yang, C.; Fan, C.; Ge, H. Grain Fragmentation in Ultrasonic-assisted TIG Weld of Pure Aluminum. Ultrason. Sonochem. 2017, 39, 403–413. Published online. DOI: https://doi.org/10.1016/j.ultsonch.2017.05.001.
- Lee, Y. J.; Shahid, M. B.; Park, D. S. Designing of Ultrasonic Horns to Improve Amplitude Uniformity in Ultrasonic Metal Welding. MATEC Web Conf 2019, 257, 02009. Published online. DOI: https://doi.org/10.1051/matecconf/201925702009.
- Brehl, D. E.; Dow, T. A. Review of Vibration-assisted Machining. Precis. Eng. 2008, 32(3), 153–172. Published online. DOI: https://doi.org/10.1016/j.precisioneng.2007.08.003.
- Xu, Y.; Wan, Z.; Zou, P.; Huang, W.; Zhang, G. Experimental Study on Cutting Force in Ultrasonic Vibration-assisted Turning of 304 Austenitic Stainless Steel. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. Published online. 2020. DOI: https://doi.org/10.1177/0954405420957127.
- Llanos, I.; Á, C.; Iturbe, A.; Arrazola, P. J.; Zelaieta, O. Experimental Analysis of Cutting Force Reduction during Ultrasonic Assisted Turning of Ti6Al4V. Procedia CIRP. 2018, 77, 86–89. DOI: https://doi.org/10.1016/j.procir.2018.08.227.
- Khajehzadeh, M.; Boostanipour, O.; Reza Razfar, M. Finite Element Simulation and Experimental Investigation of Residual Stresses in Ultrasonic Assisted Turning. Ultrasonics 2020, 108, 106208. Published online. DOI: https://doi.org/10.1016/j.ultras.2020.106208.
- Ibrahim, M. R.; Rahim, E. A.; Ghazali, M. I.; Chai, M. H.; Goh, Z. O. Experimental Analysis on Ultrasonic Assisted Turning (UAT) Based on Innovated Tool Holder in the Scope of Dry & Wet Machining. Appl. Mech. Mater. 2014, 7(5), 3533–3546. DOI: 10.4028/w ww.scientific.net/AMM.660.104.
- Maurotto, A.; Muhammad, R.; Roy, A.; Silberschmidt, V. V. Enhanced Ultrasonically Assisted Turning of a β-titanium Alloy. Ultrasonics. 2013, 53(7), 1242–1250. DOI: https://doi.org/10.1016/j.ultras.2013.03.006.
- Muhammad, R.; Hussain, M. S.; Maurotto, A.; Siemers, C.; Roy, A.; Silberschmidt, V. V. Analysis of a Free Machining α+β Titanium Alloy Using Conventional and Ultrasonically Assisted Turning. J. Mater. Process. Technol. 2014, 214(4), 906–915. Published online. DOI: https://doi.org/10.1016/j.jmatprotec.2013.12.002.
- Maurotto, A.; Siemers, C.; Muhammad, R.; Roy, A.; Silberschmidt, V. Ti Alloy with Enhanced Machinability in UAT Turning. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 2014, 45(6), 2768–2775. Published online. DOI: https://doi.org/10.1007/s11661-014-2236-y.
- Muhammad, R.; Mistry, A.; Khan, S. W.; Ahmed, N.; Roy, A.; Silberschmidt, V. V. Analysis of Tool Wear in Ultrasonically Assisted Turning of β-Ti-15V-3Al-3Cr-3Sn Alloy. Sci. Iran. Published online. 2016. DOI: https://doi.org/10.24200/sci.2016.3927.
- Wu, Y. B.; Niu, J. T.; Fujimoto, M.; Nomura, M. Fundamental Machining Characteristics of Ultrasonic Assisted Turning of Titanium Alloy Ti-6Al-4V. Adv. Mater. Res. 2013, 787, 404–407. DOI: 10.4028/w ww.scientific.net/AMR.797.344.
- Lu, D.; Wang, Q.; Wu, Y.; Cao, J.; Guo, H. Fundamental Turning Characteristics of Inconel 718 by Applying Ultrasonic Elliptical Vibration on the Base Plane. Mater. Manuf. Process. 2015, 30(8), 1010–1017. Published online. DOI: https://doi.org/10.1080/10426914.2014.973588.
- Amini, S.; Khosrojerdi, M. R.; Nosouhi, R. Elliptical Ultrasonic-assisted Turning Tool with Longitudinal and Bending Vibration Modes. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2017, 231(8), 1389–1395. Published online. DOI: https://doi.org/10.1177/0954405415592196.
- Puga; Grilo; Carneiro. Carneiro. Ultrasonic Assisted Turning of Al Alloys: Influence of Material Processing to Improve Surface Roughness. Surfaces. 2019, 2(2), 326–335. DOI: https://doi.org/10.3390/surfaces2020024.
- Nosouhi, R.; Behbahani, S.; Amini, S.; Khosrojerdi, M. R. An Experimental Study on the Cutting Forces, Surface Roughness and the Hardness of Al 6061 in 1D and 2D Ultrasonic Assisted Turning. Appl. Mech. Mater. 2014, 680, 224–227. DOI: 10.4028/w ww.scientific.net/AMM.680.224.
- Sharma, V.; Pandey, P. M. Study of Ultrasonic Assisted Turning of 4340 Steel with Plane and Selflubricating Cutting Inserts. In: ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016.; 2016. doi:https://doi.org/10.1115/MSEC20168565. Virginia Tech, Blacksburg, USA
- Yan, L.; Zhang, Q.; Yu, J. Effects of Continuous Minimum Quantity Lubrication with Ultrasonic Vibration in Turning of Titanium Alloy. Int. J. Adv. Manuf. Technol. 2018, 98(1–4), 827–837. Published online. DOI: https://doi.org/10.1007/s00170-018-2323-0.
- Kandi, R.; Sahoo, S. K.; Sahoo, A. K. Ultrasonic Vibration-assisted Turning of Titanium Alloy Ti–6Al–4V: Numerical and Experimental Investigations. J. Brazilian Soc. Mech. Sci. Eng. 2020, 42(8), Published online. DOI: https://doi.org/10.1007/s40430-020-02481-5.
- Madarkar, R.; Agarwal, S.; Attar, P.; Ghosh, S.; Rao, P. V. Application of Ultrasonic Vibration Assisted MQL in Grinding of Ti–6Al–4V. Mater. Manuf. Process. 2018, 33(13), 1445–1452. Published online. DOI: https://doi.org/10.1080/10426914.2017.1415451.
- Khanna, N.; Shah, P.; Agrawal, C.; Pusavec, F.; Hegab, H. Inconel 718 Machining Performance Evaluation Using Indigenously Developed Hybrid Machining Facilities: Experimental Investigation and Sustainability Assessment. Int. J. Adv. Manuf. Technol. 2020, 106(11–12), 4987–4999. Published online. DOI: https://doi.org/10.1007/s00170-020-04921-x.
- Chegini, A. G.; Akbari, J. Ultrasonically Assisted Turning of NiTi Based Shape Memory Alloy. In: 5th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS.; 2009. TURKEY.
- Di, I. E.; Bertolini, R.; Bruschi, S.; Ghiotti, A. Design and Development of an Ultrasonic Vibration Assisted Turning System for Machining Bioabsorbable Magnesium Alloys. Procedia CIRP. 2018. DOI: https://doi.org/10.1016/j.procir.2018.09.026.
- Nategh, M. J.; Amini, S.; Soleimanimehr, H. Modeling the Force, Surface Roughness and Cutting Temperature in Ultrasonic Vibration-assisted Turning of AI7075. Adv. Mater. Res. 2010. DOI: 10.4028/w ww.scientific.net/AMR.83-86.315.
- Teimouri, R.; Amini, S.; Mohagheghian, N. Experimental Study and Empirical Analysis on Effect of Ultrasonic Vibration during Rotary Turning of Aluminum 7075 Aerospace Alloy. J. Manuf. Process. 2017, 26, 1–12. Published online. DOI: https://doi.org/10.1016/j.jmapro.2016.11.011.
- Dong, G.; Zhang, H.; Zhou, M.; Zhang, Y. Experimental Investigation on Ultrasonic Vibration-assisted Turning of SiCp/Al Composites. Mater. Manuf. Process. Published online. 2013. DOI: https://doi.org/10.1080/10426914.2012.709338.
- Muhammad, R.; Ahmed, N.; Roy, A.; Silberschmidt, V. V. Numerical Modelling of Vibration-assisted Turning of Ti-15333. Procedia CIRP. 2012, 1, 347–352. DOI: https://doi.org/10.1016/j.procir.2012.04.062.
- Lotfi, M.; Amini, S.; Teimouri, R.; Alinaghian, M. Built-up Edge Reduction in Drilling of AISI 1045 Steel. Materials and Manufacturing Processes. 2017, 32(6), 623–630. Published online. DOI: https://doi.org/10.1080/10426914.2016.1221104.
- Cakir, F. H.; Gurgen, S.; Sofuoglu, M. A.; Celik, O. N.; Kushan, M. C. Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy. Procedia - Soc. Behav. Sci. 2015, 195, 2839–2848. Published online. DOI: https://doi.org/10.1016/j.sbspro.2015.06.404.
- Rao, C. J.; Sreeamulu, D.; Mathew, A. T. Analysis of Tool Life during Turning Operation by Determining Optimal Process Parameters. Procedia Engineering. 2014, 97, 241–250. DOI: https://doi.org/10.1016/j.proeng.2014.12.247.
- Sahithi, V. V. D.; Malayadri, T.; Srilatha, N. Optimization of Turning Parameters on Surface Roughness Based on Taguchi Technique. Mater. Today Proc. 2019, 23(Pt 1), 43–48. DOI: https://doi.org/10.1016/j.matpr.2019.07.299.
- Ghodam, S. D.;. A Review of Effects of Temperature Distribution on Tool Life in Turning Process by Using Finite Element Analysis. Int. J. Sci. Eng. Res. Published online. 2013, 1, 5(Nov-Dec 2013), 84-87
- Niu, Y.; Jiao, F.; Zhao, B.; Wang, D. Multiobjective Optimization of Processing Parameters in Longitudinal-torsion Ultrasonic Assisted Milling of Ti-6Al-4V. Int. J. Adv. Manuf. Technol. 2017, 93(9–12), 4345–4356. Published online. DOI: https://doi.org/10.1007/s00170-017-0871-3.
- Lotfi, M.; Amini, S.; Aghayar, Z.; Sajjady, S. A.; Farid, A. A. Effect of 3D Elliptical Ultrasonic Assisted Boring on Surface Integrity. Meas. J. Int. Meas. Confed. 2020, 163, 108008. Published online. DOI: https://doi.org/10.1016/j.measurement.2020.108008.
- Xiao, M.; Wang, Q. M.; Sato, K.; Karube, S.; Soutome, T.; Xu, H. The Effect of Tool Geometry on Regenerative Instability in Ultrasonic Vibration Cutting. Int. J. Mach. Tools Manuf. 2006, 46(5), 492–499. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2005.07.002.
- Tawakoli, T.; Azarhoushang, B. Influence of Ultrasonic Vibrations on Dry Grinding of Soft Steel. Int. J. Mach. Tools Manuf. 2008, 48(14), 1585–1591. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2008.05.010.
- Abootorabi Zarchi, M. M.; Razfar, M. R.; Abdullah, A. Research on the Importance of Tool-workpiece Separation in Ultrasonic Vibration-assisted Milling. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2017, 231(4), 600–607. Published online. DOI: https://doi.org/10.1177/0954405415581298.
- Zhang, Y.; Zhao, B.; Wang, Y.; Chen, F. Effect of Machining Parameters on the Stability of Separated and Unseparated Ultrasonic Vibration of Feed Direction Assisted Milling. J. Mech. Sci. Technol. Published online. 2017. DOI: https://doi.org/10.1007/s12206-017-0137-x.
- Shen, X. H.; Xu, G. F. Study of Milling Force Variation in Ultrasonic Vibration-assisted End Milling. Mater. Manuf. Process. 2018, 33(6), 644–650. Published online. DOI: https://doi.org/10.1080/10426914.2017.1364846.
- Gc, V.; Pm, P.; Us, D. Estimation of Workpiece-temperature during Ultrasonic-vibration Assisted Milling considering Acoustic Softening. Int. J. Mech. Sci. Published online. 2018. DOI: https://doi.org/10.1016/j.ijmecsci.2018.03.034.
- Tao, G.; Ma, C.; Shen, X.; Zhang, J. Experimental and Modeling Study on Cutting Forces of Feed Direction Ultrasonic Vibration-assisted Milling. Int. J. Adv. Manuf. Technol. 2017, 90(1–4), 709–715. Published online. DOI: https://doi.org/10.1007/s00170-016-9421-7.
- Abootorabi Zarchi, M. M.; Razfar, M. R.; Abdullah, A. Investigation of the Effect of Cutting Speed and Vibration Amplitude on Cutting Forces in Ultrasonic-assisted Milling. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2012, 226(7), 1185–1191. Published online. DOI: https://doi.org/10.1177/0954405412439666.
- Liu, X.; Wang, W.; Jiang, R.;, et al. Analytical Model of Cutting Force in Axial Ultrasonic Vibration-assisted Milling In-situ TiB2/7050Al PRMMCs. Chinese J. Aeronaut. Published online 2020. doi:https://doi.org/10.1016/j.cja.2020.08.009
- Chen, J.; Ming, W.; An, Q.; Chen, M. Mechanism and Feasibility of Ultrasonic-assisted Milling to Improve the Machined Surface Quality of 2D Cf/SiC Composites. Ceram. Int. Published online. 2020. DOI: https://doi.org/10.1016/j.ceramint.2020.03.047.
- Chen, X.; Zhai, W.; Dong, S.;, et al. Investigations on Torsional Fretting Wear Properties of CuAlNi Processed by Ultrasonic Vibration-assisted Milling. Tribol. Int. 2020, 146, 106238. Published online. DOI: https://doi.org/10.1016/j.triboint.2020.106238.
- Zhao, B.; Li, P.; Zhao, C.; Wang, X. Fractal Characterization of Surface Microtexture of Ti6Al4V Subjected to Ultrasonic Vibration Assisted Milling. Ultrasonics 2020, 102, 106052. Published online. DOI: https://doi.org/10.1016/j.ultras.2019.106052.
- Ni, C.; Zhu, L.; Yang, Z. Comparative Investigation of Tool Wear Mechanism and Corresponding Machined Surface Characterization in Feed-direction Ultrasonic Vibration Assisted Milling of Ti–6Al–4V from Dynamic View. Wear. August, 2019, 436–437. 203006. DOI: https://doi.org/10.1016/j.wear.2019.203006.
- Almaraz, G. M. D.;. Effect of Roughness and Residual Compression Stresses on the Ultrasonic Fatigue Endurance of Aluminum Alloy AISI 6061-T6. Mater. Perform. Charact. Published online. 2015. DOI: https://doi.org/10.1520/MPC20140064.
- Zhou, N.; Peng, R. L.; Pettersson, R. Surface Integrity of 2304 Duplex Stainless Steel after Different Grinding Operations. J. Mater. Process. Technol. Published online. 2016. DOI: https://doi.org/10.1016/j.jmatprotec.2015.09.031.
- Zhao, B.; Guo, X.; Bie, W.; Chang, B.; Zhao, C. Thermo-mechanical Coupling Effect on Surface Residual Stress during Ultrasonic Vibration-assisted Forming Grinding Gear. J. Manuf. Process. 2020, 59, 19–32. Published online. DOI: https://doi.org/10.1016/j.jmapro.2020.09.041.
- Chen, F.; Li, G.; Zhao, B.; Bie, W. Thermomechanical Coupling Effect on Characteristics of Oxide Film during Ultrasonic Vibration-assisted ELID Grinding ZTA Ceramics. Chinese J. Aeronaut Published online. 2020. DOI: https://doi.org/10.1016/j.cja.2020.05.039.
- Jiang, J.; Sun, S.; Wang, D.; Yang, Y.; Liu, X. Surface Texture Formation Mechanism Based on the Ultrasonic Vibration-assisted Grinding Process. Int. J. Mach. Tools Manuf. 2020, 156, 103595. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2020.103595.
- Wang, Q.; Liang, Z.; Wang, X.;, et al. Investigation on Surface Formation Mechanism in Elliptical Ultrasonic Assisted Grinding (EUAG) of Monocrystal Sapphire Based on Fractal Analysis Method. Int. J. Adv. Manuf. Technol. 2016, 87(9–12), 2933–2942. DOI: https://doi.org/10.1007/s00170-016-8700-7. Published online.
- Liang, Z.; Wang, X.; Wu, Y.; Xie, L.; Jiao, L.; Zhao, W. Experimental Study on Brittle-ductile Transition in Elliptical Ultrasonic Assisted Grinding (EUAG) of Monocrystal Sapphire Using Single Diamond Abrasive Grain. Int. J. Mach. Tools Manuf. 2013, 71, 41–51. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2013.04.004.
- Yang, Z.; Zhu, L.; Ni, C.; Ning, J. Investigation of Surface Topography Formation Mechanism Based on Abrasive-workpiece Contact Rate Model in Tangential Ultrasonic Vibration-assisted CBN Grinding of ZrO 2 Ceramics. Int. J. Mech. Sci. 2019, 155, 66–82. Published online. DOI: https://doi.org/10.1016/j.ijmecsci.2019.02.031.
- Yang, Z.; Zhu, L.; Lin, B.; Zhang, G.; Ni, C.; Sui, T. The Grinding Force Modeling and Experimental Study of ZrO 2 Ceramic Materials in Ultrasonic Vibration Assisted Grinding. Ceram. Int. Published online. 2019. DOI: https://doi.org/10.1016/j.ceramint.2019.01.216.
- Chen, Y.; Liang, Y.; Xu, J.; Hu, A. Ultrasonic Vibration Assisted Grinding of CFRP Composites: Effect of Fiber Orientation and Vibration Velocity on Grinding Forces and Surface Quality. Int. J. Light. Mater. Manuf. Published online. 2018. DOI: https://doi.org/10.1016/j.ijlmm.2018.08.003.
- Amini, S.; Paktinat, H.; Barani, A.; Tehran, A. F. Vibration Drilling of Al2024-T6. Mater. Manuf. Process. 2013, 28(4), 476–480. Published online. DOI: https://doi.org/10.1080/10426914.2012.736659.
- Unune, D. R.; Mali, H. S. Experimental Investigation on Low-frequency Vibration-assisted µ-ed Milling of Inconel 718. Mater. Manuf. Process. 2018, 33(9), 964–976. Published online. DOI: https://doi.org/10.1080/10426914.2017.1388516.
- Azghandi, B. V.; Kadivar, M. A.; Razfar, M. R. An Experimental Study on Cutting Forces in Ultrasonic Assisted Drilling. Procedia CIRP. 2016, 46, 563–566. DOI: https://doi.org/10.1016/j.procir.2016.04.070.
- Gao, G.; Xia, Z.; Yuan, Z.; Xiang, D.; Zhao, B. Influence of Longitudinal-torsional Ultrasonic-assisted Vibration on Micro-hole Drilling Ti-6Al-4V. Chinese J. Aeronaut Published online. 2020. DOI: https://doi.org/10.1016/j.cja.2020.06.012.
- Rahim, E.; Ogawa, T.; Miura, A.; Sasahara, H.; Koyasu, R.; Yao, Y. Ultrasonic Torsional Vibration Drilling of Aerospace Structure Material. In: Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011.; 2011. The Japan Society of Mechanical Engineers.
- Wang, D.; Jiao, F.; Mao, X. Mechanics of Thrust Force on Chisel Edge in Carbon Fiber Reinforced Polymer (CFRP) Drilling Based on Bending Failure Theory. Int. J. Mech. Sci. 2020, 190. DOI:https://doi.org/10.1016/j.ijmecsci.2019.105336. Published online.
- Kadivar, M. A.; Akbari, J.; Yousefi, R.; Rahi, A.; Nick, M. G. Investigating the Effects of Vibration Method on Ultrasonic-assisted Drilling of Al/SiCp Metal Matrix Composites. Robot. Comput. Integr. Manuf. 2014, 30(3), 344–350. Published online. DOI: https://doi.org/10.1016/j.rcim.2013.10.001.
- Liang, W.; Xu, J.; Ren, W.; Yu, Z.; Liu, Q.; Yu, H. Experimental Study on Ultrasonic Vibration Assisted Drilling of Ti-6Al-4V at Different Amplitudes. In: 2019 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, 3M-NANO 2019 China - Proceedings.; 2019. doi:https://doi.org/10.1109/3M-NANO46308.2019.8947411
- Baghlani, V.; Mehbudi, P.; Akbari, J.; Sohrabi, M. Ultrasonic Assisted Deep Drilling of Inconel 738LC Superalloy. Procedia CIRP. 2013, 6. DOI: https://doi.org/10.1016/j.procir.2013.03.096.
- Baghlani, V.; Mehbudi, P.; Akbari, J.; Nezhad, E. Z.; Sarhan, A. A. D.; Hamouda, A. M. S. An Optimization Technique on Ultrasonic and Cutting Parameters for Drilling and Deep Drilling of Nickel-based High-strength Inconel 738LC Superalloy with Deeper and Higher Hole Quality. Int. J. Adv. Manuf. Technol. 2016, 82(5–8), 877–888. Published online. DOI: https://doi.org/10.1007/s00170-015-7414-6.
- Lotfi, M.; Amini, S. Experimental and Numerical Study of Ultrasonically-assisted Drilling. Ultrasonics 2017, 75, 185–193. Published online. DOI: https://doi.org/10.1016/j.ultras.2016.11.009.
- Niketh, S.; Samuel, G. L. Surface Texturing for Tribology Enhancement and Its Application on Drill Tool for the Sustainable Machining of Titanium Alloy. J. Clean. Prod. 2017, 167, 253–270. Published online. DOI: https://doi.org/10.1016/j.jclepro.2017.08.178.
- Abdullah, A.; Shabgard, M. R.; Ivanov, A.; Shervanyi-Tabar, M. T. Effect of Ultrasonic-assisted EDM on the Surface Integrity of Cemented Tungsten Carbide (Wc-co). Int. J. Adv. Manuf. Technol. 2009, 41(3–4), 268–280. Published online. DOI: https://doi.org/10.1007/s00170-008-1476-7.
- Srivastava, V.; Pandey, P. M. Effect of Process Parameters on the Performance of EDM Process with Ultrasonic Assisted Cryogenically Cooled Electrode. J. Manuf. Process. 2012, 14(3), 393–402. Published online. DOI: https://doi.org/10.1016/j.jmapro.2012.05.001.
- Liu, D.; Nguyen, T.; Wang, J.; Huang, C. Mechanisms of Enhancing the Machining Performance in Micro Abrasive Waterjet Drilling of Hard and Brittle Materials by Vibration Assistance. Int. J. Mach. Tools Manuf. 2020, 151, 103528. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2020.103528.
- Zhu, X.; Liu, Y.; Zhang, J.; Wang, K.; Kong, H. Ultrasonic-assisted Electrochemical Drill-grinding of Small Holes with High-quality. J. Adv. Res 2020, 23, 151–161. Published online. DOI: https://doi.org/10.1016/j.jare.2020.02.010.
- Elhami, S.; Razfar, M. R. Effect of Ultrasonic Vibration on the Single Discharge of Electrochemical Discharge Machining. Mater. Manuf. Process. 2018, 33(4), 444–451. Published online. DOI: https://doi.org/10.1080/10426914.2017.1328113.
- Lee, T. C.; Zhang, J. H.; Lau, W. S. Machining of Engineering Ceramics by Ultrasonic Vibration Assisted EDM Method. Mater. Manuf. Process. 1998, 13(1), 133–146. Published online. DOI: https://doi.org/10.1080/10426919808935224.
- Hirao, A.; Gotoh, H.; Tani, T. Some Effects on EDM Characteristics by Assisted Ultrasonic Vibration of the Tool Electrode. Procedia CIRP. 2018, 68, 76–80. DOI: https://doi.org/10.1016/j.procir.2017.12.025.
- Yeo, S. H.; Goh, K. M. The Effect of Ultrasound in Micro Electro Discharge Machining on Surface Roughness. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2001, 215(2), 271–276. DOI: https://doi.org/10.1243/0954405011515217.
- Wansheng, Z.; Zhenlong, W.; Shichun, D.; Guanxin, C.; Hongyu, W. Ultrasonic and Electric Discharge Machining to Deep and Small Hole on Titanium Alloy. J. Mater. Process. Technol. 2002, 120(1–3), 101–106. Published online. DOI: https://doi.org/10.1016/S0924-0136(01)01149-9.
- Goiogana, M.; Sarasua, J. A.; Ramos, J. M. Ultrasonic Assisted Electrical Discharge Machining for High Aspect Ratio Blind Holes. Procedia CIRP. 2018, 68, 81–85. DOI: https://doi.org/10.1016/j.procir.2017.12.026.
- Singh, J.; Satsangi, P. S.; Walia, R. S.; Singh, V. P. Micro-Hardness and Machined Surface Damage Study for Continuous and Discontinuous Ultrasonic Vibration Assisted Electrical Discharge Machining. Mater. Manuf. Process. Published online. 2011. DOI: https://doi.org/10.1080/10426914.2011.585502.
- Hoang, K. T.; Yang, S. H. A Study on the Effect of Different Vibration-assisted Methods in micro-WEDM. J. Mater. Process. Technol. 2013, 213(9), 1616–1622. Published online. DOI: https://doi.org/10.1016/j.jmatprotec.2013.03.025.
- Hsue, A. W.-J.; Su, Z.-S.; Lin, Y.-L. Dual-axial Ultrasonic Assisted Wire-EDM Process with Vibration Exerted through the Upper Guide. Procedia CIRP. 2020, 95, 319–324. DOI: https://doi.org/10.1016/j.procir.2020.02.262.
- Chahine, G. L.; Kalumuck, K. M.; Frederick, G. S. The Use of Self Resonating Cavitating Water Jets for Rock Cutting. In: 8th American WaterJet Conference.; 1995. Houston, Texas.
- Foldyna, J.; Sitek, L.; Švehla, B.; Švehla, Š. Utilization of Ultrasound to Enhance High-speed Water Jet Effects. Ultrason. Sonochem. 2004, 11(3–4), 131–137. DOI: https://doi.org/10.1016/j.ultsonch.2004.01.008.
- Hou, R.; Huang, C.; Zhu, H. Experimental Study on Pulsation Behavior of the Ultrasonic Vibration-assisted Abrasive Waterjet. Int. J. Adv. Manuf. Technol. 2017, 91(9–12), 3851–3859. Published online. DOI: https://doi.org/10.1007/s00170-017-0011-0.
- Wang, T.; Hou, R.; Lv, Z. Experimental Investigation on the Material Removal of the Ultrasonic Vibration Assisted Abrasive Water Jet Machining Ceramics. Adv. Mater. Sci. Eng. Published online. 2017. DOI: https://doi.org/10.1155/2017/1365786.
- Hou, R.; Wang, T.; Lv, Z.; Liu, Y. Experimental Study of the Ultrasonic Vibration-Assisted Abrasive Waterjet Micromachining the Quartz Glass. Adv. Mater. Sci. Eng. 2018, 2018, 1–9. Published online. DOI: https://doi.org/10.1155/2018/8904234.
- Lv, Z.; Hou, R.; Wang, T.; Huang, C.; Zhu, H. Research on Cavitation Involved in Ultrasonic-assisted Abrasive Waterjet Machining. Int. J. Adv. Manuf. Technol. Published online. 2019. DOI: https://doi.org/10.1007/s00170-018-3103-6.
- Lv, Z.; Hou, R.; Zhang, Y.; Chen, X. Investigation on the Effect of Cavitation in Ultrasonic-assisted AWJ. Int. J. Adv. Manuf. Technol. 2020, 106(9–10), 3823–3830. Published online. DOI: https://doi.org/10.1007/s00170-019-04904-7.
- Goel, H.; Pandey, P. M. Experimental Investigations into the Ultrasonic Assisted Jet Electrochemical Micro-drilling Process. Mater. Manuf. Process. 2017, 32(13), 1547–1556. Published online. DOI: https://doi.org/10.1080/10426914.2017.1279294.
- Suslick, K. S.; Didenko, Y.; Fang, M. M.;, et al. Acoustic Cavitation and Its Chemical Consequences. Philos Trans R Soc A Math Phys Eng Sci. Published online 1999. doi:https://doi.org/10.1098/rsta.1999.0330 357 1751 335–353
- Shahid, M. B.; Han, S. C.; Jun, T. S.; Park, D. S. Effect of Process Parameters on the Joint Strength in Ultrasonic Welding of Cu and Ni Foils. Mater. Manuf. Process. 2019, 34(11), 1217–1224. Published online. DOI: https://doi.org/10.1080/10426914.2019.1643474.
- Fan, Y. Y.; Fan, C. L.; Yang, C. L.; Liu, W. G.; Lin, S. B. Research on Short Circuiting Transfer Mode of Ultrasonic Assisted GMAW Method. Sci. Technol. Weld. Join. 2012, 17(3), 186–191. Published online. DOI: https://doi.org/10.1179/1362171811Y.0000000058.
- Wang, Y.; Yu, C.; Lu, H.; Chen, J. Research Status and Future Perspectives on Ultrasonic Arc Welding Technique. J. Manuf. Process. 2020, 58, 936–954. Published online. DOI: https://doi.org/10.1016/j.jmapro.2020.09.005.
- Chen, C.; Fan, C.; Cai, X.; Lin, S.; Yang, C. Effects of Ultrasonic Energy on Short-circuiting Transfer Process in PU-GMA Welding. Mater. Manuf. Process. 2019, 34(11), 1225–1231. Published online. DOI: https://doi.org/10.1080/10426914.2019.1628257.
- Yuan, H.; Lin, S.; Yang, C.; Fan, C.; Wang, S. Microstructure and Porosity Analysis in Ultrasonic Assisted TIG Welding of 2014 Aluminum Alloy. China Weld. (English Ed. Published online. 2011, 20(1), 39-43.
- Chen, C.; Fan, C.; Cai, X.; Lin, S.; Yang, C. Analysis of Droplet Transfer, Weld Formation and Microstructure in Al-Cu Alloy Bead Welding Joint with Pulsed ultrasonic-GMAW Method. J. Mater. Process. Technol. 2019, 271, 144–151. Published online. DOI: https://doi.org/10.1016/j.jmatprotec.2019.03.030.
- Dong, H.; Yang, L.; Dong, C.; Kou, S. Improving Arc Joining of Al to Steel and Al to Stainless Steel. Mater. Sci. Eng. A 2012, 534, 424–435. Published online. DOI: https://doi.org/10.1016/j.msea.2011.11.090.
- Zhang, C. Q.; Robson, J. D.; Ciuca, O.; Prangnell, P. B. Microstructural Characterization and Mechanical Properties of High Power Ultrasonic Spot Welded Aluminum Alloy AA6111-TiAl6V4 Dissimilar Joints. Mater. Charact. 2014, 97, 83–91. Published online. DOI: https://doi.org/10.1016/j.matchar.2014.09.001.
- Fan, C. L.; Yang, C. L.; Lin, S. B.; Fan, Y. Y. Arc Characteristics of Ultrasonic Wave-assisted GMAW. Weld. J. Published online. 2013, 92, 375-s - 380-s.
- Zhou, T.; Ma, C. Study of Ultrasonic Vibration-assisted Forming in Copper Cylinder Compression. Procedia Manuf. 2020, 50, 199–202. Published online. DOI: https://doi.org/10.1016/j.promfg.2020.08.037.
- Zhuang, X. C.; Wang, J. P.; Zheng, H.; Zhao, Z. Forming Mechanism of Ultrasonic Vibration Assisted Compression. Trans. Nonferrous Met. Soc. China (English Ed. Published online. 2015. DOI: https://doi.org/10.1016/S1003-6326(15)63850-X.
- Xie, J.; Zhou, T.; Liu, Y.; Kuriyagawa, T.; Wang, X. Mechanism Study on Microgroove Forming by Ultrasonic Vibration Assisted Hot Pressing. Precis. Eng. 2016, 46, 270–277. Published online. DOI: https://doi.org/10.1016/j.precisioneng.2016.05.007.
- Xie, J. Q.; Zhou, T. F.; Liu, Y.; Kuriyagawa, T.; Bin, W. X. The Effects of Ultrasonic Vibration in Hot Pressing for Microgrooves. Mater. Scie. Forum. 2016, 861, 121–126. DOI: 10.4028/w ww.scientific.net/MSF.861.121.
- Li, M.; Wang, H.; Nie, K.; Liu, Y.; Liang, W. Microstructure and Tensile Properties of n-SiCp/Mg-9%Al Composites Prepared by Ultrasonic Assisted Hot Pressing of Powder. J. Mater. Eng. Perform. Published online. 2017. DOI: https://doi.org/10.1007/s11665-017-2596-8.
- Cao, M. Y.; Hu, H.; Jia, X. D.; Tian, S. J.; Zhao, C. C.; Han, X. B. Mechanism of Ultrasonic Vibration Assisted Upsetting of 6061 Aluminum Alloy. J. Manuf. Process. 2020, 59, 690–697. DOI: https://doi.org/10.1016/j.jmapro.2020.09.070.
- Xie, Z.; Guan, Y.; Zhai, J.; Zhu, L.; Zhong, C. Study on Ultrasonic Vibration Assisted Upsetting of 6063 Aluminum Alloy. Procedia Engineering. 2017, 207, 490–495. DOI: https://doi.org/10.1016/j.proeng.2017.10.810.
- Hung, J. C.; Hung, C. The Influence of Ultrasonic-vibration on Hot Upsetting of Aluminum Alloy. Ultrasonics 2005, 43(8), Published online. DOI: https://doi.org/10.1016/j.ultras.2005.03.001.
- Ma, K.; Zhu, X.; Cui, X.;, et al. Experimental Investigation on Surface Quality in Ultrasonic-assisted Honing of 304 Stainless Steel. Precis. Eng. 2020, 63, 148–158. Published online. DOI: https://doi.org/10.1016/j.precisioneng.2020.02.006.
- Singh, H.; Jain, P. K. Study on Ultrasonic-assisted Electrochemical Honing of Bevel Gears. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2018, 232(4), 705–712. Published online. DOI: https://doi.org/10.1177/0954405416654086.
- Singh, H.; Jain, P. K. Influence of Ultrasonic Vibrations on Process Performance of Electrochemical Honing. Int. J. Adv. Manuf. Technol. 2016, 87(1–4), 1057–1066. Published online. DOI: https://doi.org/10.1007/s00170-016-8560-1.
- Wang, J.; Shao, Y.; Zhu, X. Kinematics Analysis and Experimental Study on Ultrasonic Vibration Honing. In: IET Conference Publications.; 2009. doi:https://doi.org/10.1049/cp.2009.1420
- Wang, Y.; Mo, Y.; Zhu, M.; Bai, M. Wettability of Metal Coatings with Biomimic Micro Textures. Surf. Coatings Technol. 2008, 203(1–2), 137–141. Published online. DOI: https://doi.org/10.1016/j.surfcoat.2008.08.040.
- Guo, Z.; Liu, W. Progress in Biomimicing of Super-hydrophobic Surface. Prog Chem. Published online 2006. Progress in Chemistry, 2006, 18(06), 721-726.
- Pettersson, U.; Jacobson, S. Influence of Surface Texture on Boundary Lubricated Sliding Contacts. Tribol. Int. 2003, 36(11), 857–864. DOI: https://doi.org/10.1016/S0301-679X(03)00104-X.
- Huang, W.; Jiang, L.; Zhou, C.; Wang, X. The Lubricant Retaining Effect of Micro-dimples on the Sliding Surface of PDMS. Tribol. Int. 2012, 52, 87–93. Published online. DOI: https://doi.org/10.1016/j.triboint.2012.03.003.
- Zhang, N.; Yang, F.; Jiang, F.; Zhang, Y.; Liu, G. Investigation of Tribological Performance of Micro-groove Textured Cemented Carbide Surfaces. Surf. Eng. Published online. 2019. DOI: https://doi.org/10.1080/02670844.2019.1651003.
- Etsion, I.;. State of the Art in Laser Surface Texturing. J. Tribol. 2005, 127(1), 248–253. Published online. DOI: https://doi.org/10.1115/1.1828070.
- De Kraker, A.; Raj, V. O.; Van Beek, A.; Rixen, D. J. A Multiscale Method Modeling Surface Texture Effects. J. Tribol. 2007, 129(2), 221–230. Published online. DOI: https://doi.org/10.1115/1.2540156.
- Liu, W.; Ni, H.; Wang, P.; Chen, H. Investigation on the Tribological Performance of Micro-dimples Textured Surface Combined with Longitudinal or Transverse Vibration under Hydrodynamic Lubrication. Int. J. Mech. Sci. 2020, 190. DOI:https://doi.org/10.1016/j.ijmecsci.2020.105474. Published online.
- Zhu, L.; Ni, C.; Yang, Z.; Liu, C. Investigations of Micro-textured Surface Generation Mechanism and Tribological Properties in Ultrasonic Vibration-assisted Milling of Ti–6Al–4V. Precis. Eng. 2019, 57, 229–243. Published online. DOI: https://doi.org/10.1016/j.precisioneng.2019.04.010.
- Liu, W.; Ni, H.; Chen, H.; Wang, P. Numerical Simulation and Experimental Investigation on Tribological Performance of Micro-dimples Textured Surface under Hydrodynamic Lubrication. Int. J. Mech. Sci. 2019, 163, 105095. Published online. DOI: https://doi.org/10.1016/j.ijmecsci.2019.105095.
- Xu, S.; Shimada, K.; Mizutani, M.; Kuriyagawa, T. Fabrication of Hybrid Micro/nano-textured Surfaces Using Rotary Ultrasonic Machining with One-point Diamond Tool. Int. J. Mach. Tools Manuf. 2014, 86, 12–17. Published online. DOI: https://doi.org/10.1016/j.ijmachtools.2014.06.005.
- Chang, Q. Y.; Zheng, X. L.; Liu, Q. Numerical Simulation on the Lubrication Performance of Surface Textured Piston Rings. Adv. Mater. Res. 2011, 383-390, 4065–4069. DOI: 10.4028/w ww.scientific.net/AMR.199-200.734.
- Liu, X.; Wu, D.; Zhang, J.; Hu, X.; Cui, P. Analysis of Surface Texturing in Radial Ultrasonic Vibration-assisted Turning. J. Mater. Process. Technol. Published online. 2019. DOI: https://doi.org/10.1016/j.jmatprotec.2018.12.021.
- Kumar, M. N.; Kanmani Subbu, S.; Vamsi Krishna, P.; Venugopal, A. Vibration Assisted Conventional and Advanced Machining: A Review. Procedia Engineering. 2014, 97, 1577–1586. DOI: https://doi.org/10.1016/j.proeng.2014.12.441.
- Lauwers, B.;. Surface Integrity in Hybrid Machining Processes. Procedia Engineering. 2011, 19, 241–251. DOI: https://doi.org/10.1016/j.proeng.2011.11.107.