References
- Pusavec, F.; Grguras, D.; Koch, M.; Krajnik, P. Cooling Capability of Liquid Nitrogen and Carbon Dioxide in Cryogenic Milling. CIRP Ann. Manuf. Technol. 2019, 68, 73–76. DOI: https://doi.org/10.1016/j.cirp.2019.03.016.
- Ulutan, D.; Ozel, T. Machining Induced Surface Integrity in Titanium and Nickel Alloys: A Review. Int. J. Mach. Tool. Manu. 2011, 51, 250–280. DOI: https://doi.org/10.1016/j.ijmachtools.2010.11.003.
- Gross, D.; Bigelmaier, M.; Meier, T.; Amon, S.; Ostrowicki, N.; Hanenkamp, N. Investigation of the Influence of Lubricating Oils on the Turning of Metallic Materials with Cryogenic Minimum Quantity Lubrication. Procedia CIRP. 2019, 80, 95–100. DOI: https://doi.org/10.1016/j.procir.2019.01.005.
- Augspurger, T.; Koch, M.; Klocke, F.; Döbbeler, B. Investigation of Transient Temperature Fields in the Milling Cutter under CO2 Cooling by Means of an Embedded Thermocouple. Procedia CIRP. 2019, 9, 33–38. DOI: https://doi.org/10.1016/j.procir.2019.02.007.
- Jerold, B. D.; Kumar, M. P. Experimental Comparison of Carbon-Dioxide and Liquid Nitrogen Cryogenic Coolants in Turning of AISI 1045 Steel. Cryogenics. 2012, 52(10), 569–574. DOI: https://doi.org/10.1016/j.cryogenics.2012.07.009.
- Patrick, M.; Robert, S.; Marek, S.; Dietmar, E.; Aurich, J. C. Deformation Induced Surface Hardening When Turning Metastable Austenitic Steel AISI 347 with Different Cryogenic Cooling Strategies. Procedia CIRP. 2014, (2014)(14), 101–106. DOI: https://doi.org/10.1016/j.procir.2014.03.097.
- Jebaraj, M.; Kumar, M. P. Effect of Cryogenic CO2 and LN2 Coolants in Milling of Aluminum Alloy. Mater. Manuf. Processes. 2019, 34(5), 511–520. DOI: https://doi.org/10.1080/10426914.2018.1532591.
- Jebaraj, M.; Kumar, M. P.; Yuvaraj, N.; Rahman, G. M. Experimental Study of the Influence of the Process Parameters in the Milling of Al6082-T6 Alloy. Mater. Manuf. Processes. 2019, 34(12), 1411–1427. DOI: https://doi.org/10.1080/10426914.2019.1594271.
- Klocke, F.; Krämer, A.; Sangermann, H.; Lung, D. Thermo-Mechanical Tool Load during High Performance Cutting of Hard-to-cut Materials. Procedia CIRP. 2012, 1, 295–300. DOI: https://doi.org/10.1016/j.procir.2012.04.053.
- Jebaraj, M.; Kumar, M. P.; Yuvaraj, N.; Anburaj, R. Investigation of Surface Integrity in End Milling of 55NiCrMoV7 Die Steel under the Cryogenic Environments. Mach. Sci. Technol. 2020, 24(3), 465–488. DOI: https://doi.org/10.1080/10910344.2019.1698612.
- Jebaraj, M.; Kumar, M. P.; Anburaj, R. Effect of LN2 and CO2 Coolants in Milling of 55NiCrMoV7 Steel. J. Manuf. Process. 2020, 53, 318–327. DOI: https://doi.org/10.1016/j.jmapro.2020.02.040.
- Yildirim, C. V.; Kivak, T.; Sarikaya, M.; Sirin, S. Evaluation of Tool Wear, Surface Roughness/Topography and Chip Morphology When Machining of Ni-Based Alloy 625 under MQL, Cryogenic Cooling and CryoMQL. J. Mater. Res. Technol. 2020, 9(2), 2079–2092. DOI: https://doi.org/10.1016/j.jmrt.2019.12.069.
- Arunachalam, R. M.; Mannan, M. A.; Spowage, A. C. Residual Stress and Surface Roughness When Facing Age Hardened Inconel 718 with CBN and Ceramic Cutting Tools. Int. J. Mach. Tool. Manu. 2004, 44(9), 879–887. DOI: https://doi.org/10.1016/j.ijmachtools.2004.02.016.
- Jawahir, I. S.; Brinksmeier, E.; M’Saoubi, R.; Aspinwall, D. K.; Outeiro, J. C.; Meyer, D.; Umbrello, D.; Jayal, A. D. Surface Integrity in Material Removal Processes: Recent Advances. CIRP Ann. Manuf. Technol. 2011, 60, 603–626. DOI: https://doi.org/10.1016/j.cirp.2011.05.002.
- Devillez, A.; Le Coz, G.; Dominiak, S.; Dudzinski, D. Dry Machining of Inconel 718, Workpiece Surface Integrity. J. Mater. Res. Technol. 2011, 211(10), 1590–1598. DOI: https://doi.org/10.1016/j.jmatprotec.2011.04.011.
- Sharman, A. R. C.; Hughes, J. I.; Ridgway, K. An Analysis of the Residual Stresses Generated in Inconel 718™ When Turning. J. Mater. Process Tech. 2006, 173(3), 359–367. DOI: https://doi.org/10.1016/j.jmatprotec.2005.12.007.
- Anburaj, R.; Kumar, M. P. Experimental Studies on Cryogenic CO2 Face Milling of Inconel 625 Superalloy. Mater. Manuf. Processes. 2020, 36(7), 814–826. DOI: https://doi.org/10.1080/10426914.2020.1866199.
- Shaw, M. C.;. Metal Cutting Principles, Second ed.; Oxford University Press: London, 2004; pp 206–264.
- Pervaiz, S.; Rashid, A.; Deiab, I.; Nicolescu, M. Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review. Mater. Manuf. Processes. 2014, 29(3), 219–252. DOI: https://doi.org/10.1080/10426914.2014.880460.
- Liu, C. R.; Barash, M. M. Variables Governing Patterns of Mechanical Residual Stress in a Machined Surface. J. Eng. Ind. 1982, 104(3), 257–264. DOI: https://doi.org/10.1115/1.3185828.
- Pusavec, F.; Hamdi, H.; Kopac, J.; Jawahir, I. S. Surface Integrity in Cryogenic Machining of Nickel Based Alloy-Inconel 718. J. Mater. Res. Technol. 2011, 211(4), 773–783. DOI: https://doi.org/10.1016/j.jmatprotec.2010.12.013.
- Smith, G. T.;. Industrial Metrology Surfaces and Roundness, First ed; Springer-Verlag: London, 2002. Doi:https://doi.org/10.1007/978-1-4471-3814-3.