References
- Mitsuishi, M.; Cao, J.; Bartolo, P.; Friedrich, D.; Shih, A. J.; Rajurkar, K.; Sugita, N.; Harada, K. Biomanufacturing. CIRP Annu. Manuf. Technol. 2013, 62(2), 585–606. DOI: https://doi.org/10.1016/j.cirp.2013.05.001.
- Khan, W.; Muntimadugu, E.; Jaffe, M.; Domb, A. J. Implantable Medical Devices. In Focal Controlled Drug Delivery; Khan, W., Domb, A. J., Eds.; Springer: New York, 2014; pp 33–59.
- Bartolo, P.; Kruth, J. P.; Silva, J.; Levy, G.; Malshe, A.; Rajurkar, K.; Mitsuishi, M.; Ciurana, J.; Leu, M. Biomedical Production of Implants by Additive Electro-Chemical and Physical Processes. CIRP Ann. Manuf. Technol. 2012, 61(2), 635–655. DOI: https://doi.org/10.1016/j.cirp.2012.05.005.
- Kumar, N.; Arora, N. C.; Datta, B.; Bearing Surfaces in Hip Replacement - Evolution and Likely Future. Med. J. Armed Forces India 2014, 70(4), 371–376. DOI:https://doi.org/10.1016/j.mjafi.2014.04.015.
- Meftah, M.; Klingenstein, G. G.; Yun, R. J.; Ranawat, A. S.; Ranawat, C. S.; Long-Term Performance of Ceramic and Metal Femoral Heads on Conventional Polyethylene in Young and Active Patients: A Matched-Pair Analysis. J. Bone Jt. Surg. - Ser. A. 2013, 95(13), 1193–1197. DOI:https://doi.org/10.2106/JBJS.L.00432.
- Czelusniak, T.; Higa, C. F.; Torres, R. D.; Laurindo, C. A. H.; de Paiva Júnior, J. M. F.; Lohrengel, A.; Amorim, F. L. Materials Used for Sinking EDM Electrodes: A Review. J. Braz. Soc. Mech. Sci. Eng. 2019, 41(1), 14. DOI: https://doi.org/10.1007/s40430-018-1520-y.
- Roy, S.; Kumar, R.; Das, R. K.; Sahoo, A. K. A Comprehensive Review on Machinability Aspects in Hard Turning of AISI 4340 Steel. IOP Conf. Ser. Mater. Sci. Eng. 2018, 390, 012009. DOI: https://doi.org/10.1088/1757-899X/390/1/012009.
- El Baradie, M. A.;. Cutting Fluids: Part I. Characterisation. J. Mater. Process. Technol. 1996, 56(1–4), 786–797. DOI: https://doi.org/10.1016/0924-0136(95)01892-1.
- Maji, P. K.; Banerjee, A. J.; Banerjee, P. S.; Karmakar, S. Additive Manufacturing in Prosthesis Development - A Case Study. Rapid Prototyp. J. 2014, 20(6), 480–489. DOI: https://doi.org/10.1108/RPJ-07-2012-0066.
- Joshi, A. Y.; Joshi, A. Y.; Systematic, A. Review on Powder Mixed Electrical Discharge Machining. Heliyon. 2019, 5(12), e02963. DOI: https://doi.org/10.1016/j.heliyon.2019.e02963.
- Singh, S.; Maheshwari, S.; Pandey, P. C. Some Investigations into the Electric Discharge Machining of Hardened Tool Steel Using Different Electrode Materials. Journal of Materials Processing Technology. 2004, 149(1–3), 272–277. DOI: https://doi.org/10.1016/j.jmatprotec.2003.11.046.
- Luis, C. J.; Puertas, I.; Villa, G. Material Removal Rate and Electrode Wear Study on the EDM of Silicon Carbide. J. Mater. Process. Technol. 2005, 164–165, 889–896. DOI: https://doi.org/10.1016/j.jmatprotec.2005.02.045.
- Ming, W.; Zhang, Z.; Wang, S.; Zhang, Y.; Shen, F.; Zhang, G. Comparative Study of Energy Efficiency and Environmental Impact in Magnetic Field Assisted and Conventional Electrical Discharge Machining. J. Clean. Prod. 2019, 214, 12–28. DOI: https://doi.org/10.1016/j.jclepro.2018.12.231.
- Shrivastava, P. K.; Dubey, A. K. Electrical Discharge Machining–Based Hybrid Machining Processes: A Review. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2014, 228(6), 799–825. DOI: https://doi.org/10.1177/0954405413508939.
- Electrical Discharge Machining (EDM) Design Consideration Process and Capabilities. Engineers Edge. URL [https://www.engineersedge.com/edm.shtml] (accessed Feb 4 2021)
- Li, H.; Wang, Z.; Wang, Y.; Liu, H.; Bai, Y. Micro-EDM Drilling of ZrB2-SiC-Graphite Composite Using Micro Sheet-Cylinder Tool Electrode. Int. J. Adv. Manuf. Technol. 2017, 92(5–8), 2033–2041. DOI: https://doi.org/10.1007/s00170-017-0296-z.
- Qian, J.; Wang, J.; Ferraris, E.; Reynaerts, D. A Holistic Approach for Zero-Defect Micro-EDM Milling. In Proceedings - 2013 IEEE International Symposium on Assembly and Manufacturing, Xi’an, China, 2013; pp 226–229. 10.1109/ISAM.2013.6643533.
- Zhang, J. H.; Lee, T. C.; Lau, W. S.; Ai, X. Spark Erosion with Ultrasonic Frequency. J. Mater. Process. Technol. 1997, 68(1), 83–88. DOI: https://doi.org/10.1016/S0924-0136(96)02545-9.
- Ekmekci, B.; Erden, A. Remarks on Surface Integrity of Electric Discharge Machined Surfaces: A State of Art Review. International Conference on Machine Design and Production, Antalya, Turkey. 2004, 1, 411–428.
- Bisaria, H.; Shandilya, P. Machining of Metal Matrix Composites by EDM and Its Variants: A Review. In DAAAM International Scientific Book; Katalinic, B., Ed.; DAAAM International: Vienna: Austria, 2015; pp 267–282. DOI: https://doi.org/10.2507/daaam.scibook.2015.23.
- Kunieda, M.;. Electrical Discharge Machining Processes. In Handbook of Manufacturing Engineering and Technology; Andrew, Y. C., Nee, E., Eds.; Springer: London, 2015; pp 1551–1580.
- Wire EDM. Manufacturing Guide. URL [https://www.manufacturingguide.com/en/wire-edm] (accessed Feb 4 2021)
- Electrical Discharge Grinding. Manufacturing Guide. URL [https://www.manufacturingguide.com/en/wire-edm] (accessed Feb 4 2021)
- Modica, F.; Marrocco, V.; Fassi, I. Micro-Electro-Discharge Machining (Micro-EDM). In Micro-Manufacturing Technologies and Their Applications; Fassi, I., Shipley, D., Eds.; Springer: Switzerland, 2017; pp 149–173. DOI: https://doi.org/10.1007/978-3-319-39651-4_6.
- Qian, J.; Yang, F.; Wang, J.; Lauwers, B.; Reynaerts, D. Material Removal Mechanism in Low-Energy Micro-EDM Process. CIRP Ann. Manuf. Technol. 2015, 64(1), 225–228. DOI: https://doi.org/10.1016/j.cirp.2015.04.040.
- Sonawane, H. A.; Pawade, R. S.; Effects of Powder Mixed Dielectric on Electro Discharge Machining (PMEDM) of HSS Tool Steel. Int. J. Mechatron. Manuf. Syst. 2012, 5(5/6), 431–454. DOI:https://doi.org/10.1504/IJMMS.2012.049971.
- Pant, P.; Bharti, P. S. Electrical Discharge Machining (EDM) of Nickel-Based Nimonic Alloys: A Review. Mater. Today Proc. 2019, 25, 765–772. DOI: https://doi.org/10.1016/j.matpr.2019.09.007.
- Schmalz, G.;. Determination of Biocompatibility. In Biocompatibility of Dental Materials; Schmalz, G., Arenholt-Bindslev, D., Eds.; Springer: Berlin Heidelberg, 2009; pp 13–43. DOI: https://doi.org/10.1007/978-3-540-77782-3.
- Nakai, M.; Niinomi, M. Mechanical Property of Biomedical Materials. In Novel Structured Metallic and Inorganic Materials; Setsuhara, Y., Kamiya, T., Yamaura, S.-I., Eds.; Springer: Japan, 2019; pp 385–397. DOI: https://doi.org/10.1007/978-981-13-7611-5_26.
- Rungsri, T. N.; Meesane, J. Hybrid Composite Material of Bombyx Silk Fiber for Ankle Foot Orthoses: Morphology, Physical, and Mechanical Properties. In 5th 2012 Biomedical Engineering International Conference, Thailand, 2012; pp 225–228. https://doi.org/10.1109/BMEiCon.2012.6465469.
- Torres, Y.; Trueba, P.; Pavon, J. J.; Rodriguez, J. A. Titanium for Biomedical Application with Radial Graded Porosity: Development of a Novel Compaction Device. In Pan American Health Care Exchanges; IEEE: Medellin, Colombia: 2013; pp. 1. DOI: https://doi.org/10.1109/PAHCE.2013.6568340.
- Sinha, N.; Yeow, J. T. W.; Carbon Nanotubes for Biomedical Applications. IEEE Trans. Nanobiosci. 2005, 4(2), 180–195. DOI:https://doi.org/10.1109/TNB.2005.850478.
- Mahbod, M.; Asgari, M. Mechanical Properties of Functionally Graded Biomaterials in Bone Replacement; Analytical and Numerical Solution. In 2018 25th National and 3rd International Iranian Conference on Biomedical Engineering (ICBME), Qom, Iran, 2018; pp. 1–6. 10.1109/ICBME.2018.8703574.
- Jonoobi, M.; Mathew, A. P.; Oksman, K. Natural Resources and Residues for Production of Bionanomaterials. In Handbook of Green Materials; Oksman, K., Mathew, A. P., Bismarck, A., Rojas, O., Sain, M., Eds.; World Scientific: Singapore, 2014; pp 19–33. DOI: https://doi.org/10.1142/9789814566469_0003.
- Zhang, Y.; Ahn, P. B.; Fitzpatrick, D. C.; Heiner, A. D.; Poggie, R. A.; Brown, T. D.; Interfacial Frictional Behavior: Cancellous Bone, Cortical Bone, and a Novel Porous Tantalum Biomaterial. J. Musculoskelet. Res. 1999, 3(4), 245–251. DOI:https://doi.org/10.1142/S0218957799000269.
- Poon, K. K.; Wurm, M. C.; Evans, D. M.; Einarsrud, M.; Lutz, R.; Glaum, J. Biocompatibility of (Ba,ca)(zr,ti)o 3 Piezoelectric Ceramics for Bone Replacement Materials. J. Biomed. Mater. Res. Part B Appl. Biomater. 2020, 108(4), 1295–1303. DOI: https://doi.org/10.1002/jbm.b.34477.
- Anselme, K.; Bigerelle, M. On the Relation between Surface Roughness of Metallic Substrates and Adhesion of Human Primary Bone Cells. Scanning. 2014, 36(1), 11–20. DOI: https://doi.org/10.1002/sca.21067.
- Visaveliya, N. R.; Leishman, C. W.; Ng, K.; Yehya, N.; Tobar, N.; Eisele, D. M.; Köhler, J. M. Surface Wrinkling and Porosity of Polymer Particles toward Biological and Biomedical Applications. Adv. Mater. Interfaces. 2017, 4(24), 1700929. DOI: https://doi.org/10.1002/admi.201700929.
- Guzman, R.; Fernandez-García, E.; Gutierrez-Gonzalez, C. F.; Fernandez, A.; Lopez-Lacomba, J. L.; Lopez-Esteban, S. Biocompatibility Assessment of Spark Plasma-Sintered Alumina-Titanium Cermets. J. Biomater. Appl. 2016, 30(6), 759–769. DOI: https://doi.org/10.1177/0885328215584858.
- Hwang, Y.-J.; Choi, Y.-S.; Hwang, Y.-H.; Cho, H.-W.; Lee, D.-G. Biocompatibility and Biological Corrosion Resistance of Ti–39Nb–6Zr+0.45Al Implant Alloy. J. Funct. Biomater. 2020, 12(1), 2. DOI: https://doi.org/10.3390/jfb12010002.
- Cheng, J.; Li, J.; Yu, S.; Du, Z.; Dong, F.; Zhang, J.; Zhang, X. Corrosion Behavior of As-Cast Ti–10Mo–6Zr–4Sn–3Nb and Ti–6Al–4V in Hank’s Solution: A Comparison Investigation. Metals (Basel). 2020, 11(1), 11. DOI: https://doi.org/10.3390/met11010011.
- Beig, B.; Liaqat, U.; Niazi, M. F. K.; Douna, I.; Zahoor, M.; Niazi, M. B. K. Current Challenges and Innovative Developments in Hydroxyapatite-Based Coatings on Metallic Materials for Bone Implantation: A Review. Coatings. 2020, 10(12), 1249. DOI: https://doi.org/10.3390/coatings10121249.
- Sreekantan, S.; Hassan, M.; Sundera Murthe, S.; Seeni, A. Biocompatibility and Cytotoxicity Study of Polydimethylsiloxane (PDMS) and Palm Oil Fuel Ash (POFA) Sustainable Super-Hydrophobic Coating for Biomedical Applications. Polymers (Basel). 2020, 12(12), 3034. DOI: https://doi.org/10.3390/polym12123034.
- Jörg, F.; Betül, K. A.; Heiner, M.; Gerhard, K.; Erwin, B. R. Effects of Ti6Al4V Surfaces Manufactured through Precision Centrifugal Casting and Modified by Calcium and Phosphorus Ion Implantation on Human Osteoblasts. Metals (Basel). 2020, 10(12), 1681. DOI: https://doi.org/10.3390/met10121681.
- Ødegaard, K. S.; Torgersen, J.; Elverum, C. W. Structural and Biomedical Properties of Common Additively Manufactured Biomaterials: A Concise Review. Metals (Basel). 2020, 10(12), 1677. DOI: https://doi.org/10.3390/met10121677.
- Sauceda, S.; Lascano, S.; Béjar, L.; Neves, G. O.; Chicardi, E.; Salvo, C.; Aguilar, C. Study of the Effect of the Floating Die Compaction on Mechanical Properties of Titanium Foams. Metals (Basel). 2020, 10(12), 1621. DOI: https://doi.org/10.3390/met10121621.
- Saleem, W.; Salah, B.; Velay, X.; Ahmad, R.; Khan, R.; Pruncu, C. I. Numerical Modeling and Analysis of Ti6Al4V Alloy Chip for Biomedical Applications. Materials (Basel). 2020, 13(22), 5236. DOI: https://doi.org/10.3390/ma13225236.
- Mitchell, J.; Crow, N.; Nieto, A. Effect of Surface Roughness on Pitting Corrosion of AZ31 Mg Alloy. Metals (Basel). 2020, 10(5), 651. DOI: https://doi.org/10.3390/met10050651.
- Vorobjova, A.; Tishkevich, D.; Shimanovich, D.; Zdorovets, M.; Kozlovskiy, A.; Zubar, T.; Vinnik, D.; Dong, M.; Trukhanov, S.; Trukhanov, A.; et al. Electrochemical Behaviour of Ti/Al2O3/Ni Nanocomposite Material in Artificial Physiological Solution: Prospects for Biomedical Application. Nanomaterials. 2020, 10(1), 173. DOI: https://doi.org/10.3390/nano10010173.
- Thirumalvalavan, S.; Malliga, P. Optimisation of Wear Behaviour of Heat Treated Ti-6Al-4V Alloy by Response Surface Methodology. Int. J. Mater. Prod. Technol. 2017, 55(1/2/3), 44–55. DOI: https://doi.org/10.1504/IJMPT.2017.084952.
- Godavitarne, C.; Robertson, A.; Peters, J.; Rogers, B.; Biodegradable Materials. Orthop. Trauma. 2017, 31(5), 316–320. DOI:https://doi.org/10.1016/j.mporth.2017.07.011.
- Li, C. Y.; Gao, L.; Fan, X. L.; Zeng, R. C.; Chen, D. C.; Zhi, K. Q. In Vitro Degradation and Cytocompatibility of a Low Temperature In-Situ Grown Self-Healing Mg-Al LDH Coating on MAO-Coated Magnesium Alloy AZ31. Bioact. Mater. 2020, 5(2), 364–376. DOI: https://doi.org/10.1016/j.bioactmat.2020.02.008.
- Dambatta, M. S.; Izman, S.; Kurniawan, D.; Hermawan, H.; Processing of Zn-3Mg Alloy by Equal Channel Angular Pressing for Biodegradable Metal Implants. J. King Saud Univ. - Sci. 2017, 29(4), 455–461. DOI:https://doi.org/10.1016/j.jksus.2017.07.008.
- Murni, N. S.; Dambatta, M. S.; Yeap, S. K.; Froemming, G. R. A.; Hermawan, H. Cytotoxicity Evaluation of Biodegradable Zn-3Mg Alloy toward Normal Human Osteoblast Cells. Mater. Sci. Eng. C. 2015, 49, 560–566. DOI: https://doi.org/10.1016/j.msec.2015.01.056.
- Dambatta, M. S.; Izman, S.; Hermawan, H.; Kurniawan, D. Influence of Heat Treatment Cooling Mediums on the Degradation Property of Biodegradable Zn-3Mg Alloy. Adv. Mater. Res. 2014, 845, 7–11. DOI: https://doi.org/10.4028/scientific.net/AMR.845.7.
- Sun, H. F.; Li, C. J.; Xie, Y.; Fang, W. B. Microstructures and Mechanical Properties of Pure Magnesium Bars by High Ratio Extrusion and Its Subsequent Annealing Treatment. Trans. Nonferrous Met. Soc. China. 2012, 22(SUPPL.2), 445–449. DOI: https://doi.org/10.1016/S1003-6326(12)61744-0.
- Venezuela, J.; Dargusch, M. S. The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review. Acta Biomater. 2019, 87, 1–40. DOI: https://doi.org/10.1016/j.actbio.2019.01.035.
- Fan, J.; Qiu, X.; Niu, X.; Tian, Z.; Sun, W.; Liu, X.; Li, Y.; Li, W.; Meng, J. Microstructure, Mechanical Properties, in Vitro Degradation and Cytotoxicity Evaluations of Mg-1.5Y-1.2Zn-0.44Zr Alloys for Biodegradable Metallic Implants. Mater. Sci. Eng. C. 2013, 33(4), 2345–2352. DOI: https://doi.org/10.1016/j.msec.2013.01.063.
- Hufenbach, J.; Kochta, F.; Wendrock, H.; Voß, A.; Giebeler, L.; Oswald, S.; Pilz, S.; Kühn, U.; Lode, A.; Gelinsky, M.; et al. S and B Microalloying of Biodegradable Fe-30Mn-1C - Effects on Microstructure, Tensile Properties, in Vitro Degradation and Cytotoxicity. Mater. Des. 2018, 142, 22–35. DOI: https://doi.org/10.1016/j.matdes.2018.01.005.
- El-Hadad, S.; Safwat, E. M.; Sharaf, N. F. In-Vitro and in-Vivo, Cytotoxicity Evaluation of Cast Functionally Graded Biomaterials for Dental Implantology. Mater. Sci. Eng. C. 2018, 93, 987–995. DOI: https://doi.org/10.1016/j.msec.2018.09.003.
- Stráský, J.; Janeček, M.; Harcuba, P.; Bukovina, M.; Wagner, L. The Effect of Microstructure on Fatigue Performance of Ti-6Al-4V Alloy after EDM Surface Treatment for Application in Orthopaedics. J. Mech. Behav. Biomed. Mater. 2011, 4(8), 1955–1962. DOI: https://doi.org/10.1016/j.jmbbm.2011.06.012.
- González-García, D. M.; Téllez Jurado, L.; Jiménez-Gallegos, R.; Rodríguez-Lorenzo, L. M. Novel Non-Cytotoxic, Bioactive and Biodegradable Hybrid Materials Based on Polyurethanes/TiO2 for Biomedical Applications. Mater. Sci. Eng. C. 2017, 75, 375–384. DOI: https://doi.org/10.1016/j.msec.2017.02.041.
- Fernandes, L.; De Carvalho, R. A.; Amaral, A. C.; Pecoraro, E.; Salomão, R.; Trovatti, E. Mullite Cytotoxicity and Cell Adhesion Studies. J. Mater. Res. Technol. 2019, 8(3), 2565–2572. DOI: https://doi.org/10.1016/j.jmrt.2019.04.001.
- Ansari, S. M.; Bhor, R. D.; Pai, K. R.; Sen, D.; Mazumder, S.; Ghosh, K.; Kolekar, Y. D.; Ramana, C. V. Cobalt Nanoparticles for Biomedical Applications: Facile Synthesis, Physiochemical Characterization, Cytotoxicity Behavior and Biocompatibility. Appl. Surf. Sci. 2017, 414, 171–187. DOI: https://doi.org/10.1016/j.apsusc.2017.03.002.
- Pandit, A.; Planel, J.; Navarro, M. A - Titanium and Nitinol (Niti). In Biomaterials Science (Third Edition) an Introduction to Materials in Medicine; Ratner, B. D., Hoffman, A. S., Schoen, F. J., Lemons, J. E., Eds.; Elsevier: UK, 2013; pp 120–124.
- Wever, D. J.; Veldhuizen, A. G.; Sanders, M. M.; Schakenraad, J. M.; Van Horn, J. R. Cytotoxic, Allergic and Genotoxic Activity of a Nickel-Titanium Alloy. Biomaterials. 1997, 18(16), 1115–1120. DOI: https://doi.org/10.1016/S0142-9612(97)00041-0.
- Say, Y.; Aksakal, B. Enhanced Corrosion Properties of Biological NiTi Alloy by Hydroxyapatite and Bioglass Based Biocomposite Coatings. J. Mater. Res. Technol. 2020, 9(2), 1712–1749. DOI: https://doi.org/10.1016/j.jmrt.2019.12.005.
- Nasab, M. B.; Hassan, M. R.; Sahari, B. Metallic Biomaterials of Knee and Hip - a Review. Trends in Biomaterials and Artificial Organs. 2010, 24, 69–82.
- Staiger, M. P.; Pietak, A. M.; Huadmai, J.; Dias, G. Magnesium and Its Alloys as Orthopedic Biomaterials: A Review. Biomaterials. 2006, 27(9), 1728–1734. DOI: https://doi.org/10.1016/j.biomaterials.2005.10.003.
- Axinte, D.; Guo, Y.; Liao, Z.; Shih, A. J.; M’Saoubi, R.; Sugita, N. Machining of Biocompatible Materials — Recent Advances. CIRP Ann. 2019, 68(2), 629–652. DOI: https://doi.org/10.1016/j.cirp.2019.05.003.
- Kieswetter, K.; Schwartz, Z.; Dean, D. D.; Boyan, B. D.; The Role of Implant Surface Characteristics in the Healing of Bone. Crit. Rev. Oral Biol. Med. 1996, 7(4), 329–345. DOI:https://doi.org/10.1177/10454411960070040301.
- Buser, D.; Schenk, R. K.; Steinemann, S.; Fiorellini, J. P.; Fox, C. H.; Stich, H. Influence of Surface Characteristics on Bone Integration of Titanium Implants. A Histomorphometric Study in Miniature Pigs. J. Biomed. Mater. Res. 1991, 25(7), 889–902. DOI: https://doi.org/10.1002/jbm.820250708.
- Jahan, M. P.; Kakavand, P.; Alavi, F. A Comparative Study on Micro-Electro-Discharge-Machined Surface Characteristics of Ni-Ti and Ti-6Al-4V with respect to Biocompatibility. Procedia Manuf. 2017, 10, 232–242. DOI: https://doi.org/10.1016/j.promfg.2017.07.051.
- Singh, N.; Panpalia, N.; Singh, M. M.; Routara, B. C.; Nayak, R. K. Comparison of Machining Characteristics of Inconel 601 with Normal and Cryogenic Cooled Electrode in EDM Using RSM. IOP Conf. Ser. Mater. Sci. Eng. 2018, 455, 012078. DOI: https://doi.org/10.1088/1757-899X/455/1/012078.
- Jesudas, T.; Ramesh, S.; Senthilkumar, K.; Arunachalam, R. M. Study and Optimization of Overcut on Most Influencing Process Parameters of Micro EDM. Int. J. Appl. Eng. Res. 2015, 10, 13678–13683.
- Bhui, A. S.; Singh, G.; Sidhu, S. S.; Bains, P. S.; Experimental Investigation of MWCNTs Mixed EDM of Ti-6Al-4V Surface. Int. J. Precis. Technol. 2020, 9(1), 56–70. DOI:https://doi.org/10.1504/ijptech.2020.109778.
- Jose, J. V.; Shunmugam, M. S. Investigation into White Layer Formed on Wire Electrical Discharge Machined Ti6Al4V Surface. Int. J. Mach. Mach. Mater. 2009, 6(3–4), 234–249. DOI: https://doi.org/10.1504/IJMMM.2009.027326.
- Jahan, M. P.; Alavi, F.; Kirwin, R.; Mahbub, R. Micro-EDM Induced Surface Modification of Titanium Alloy for Biocompatibility. Int. J. Mach. Mach. Mater. 2018, 20(3), 274–298. DOI: https://doi.org/10.1504/IJMMM.2018.093548.
- Bigerelle, M.; Anselme, K.; Giljean, S.; Biocompatibility of the Electrical Discharge Machining Process on Titanium Surfaces. Int. J. Mechatron. Manuf. Syst. 2012, 5(5/6), 419–430. DOI:https://doi.org/10.1504/IJMMS.2012.049970.
- Gupta, V.; Singh, B.; Mishra, R. K. Machining of Titanium and Titanium Alloys by Electric Discharge Machining Process: A Review. Int. J. Mach. Mach. Mater. 2020, 22(2), 99–121. DOI: https://doi.org/10.1504/IJMMM.2020.105661.
- Klocke, F.; Schwade, M.; Welling, D.; Kopp, A.; Multi-Scale Directed Surface Topography Machined by Electro Discharge Machining in Combination with Plasma Electrolytic Conversion for Improved Osseointegration. Int. J. Mechatron. Manuf. Syst. 2013, 6(3), 254–269. DOI:https://doi.org/10.1504/IJMMS.2013.056452.
- Sivakumar, S.; Adam Khan, M.; Muralidharan, B. Studies on Surface Quality of Stainless-Steel Implant Material while Machining with WEDM Process. Int. J. Mach. Mach. Mater. 2020, 22(5), 374–385. DOI: https://doi.org/10.1504/IJMMM.2020.109845.
- Ablyaz, T. R.; Shlykov, E. S.; Muratov, K. R.; Mahajan, A.; Singh, G.; Devgan, S.; Sidhu, S. S. Surface Characterization and Tribological Performance Analysis of Electric Discharge Machined Duplex Stainless Steel. Micromachines. 2020, 11(10), 926. DOI: https://doi.org/10.3390/mi11100926.
- Umar Farooq, M.; Pervez Mughal, M.; Ahmed, N.; Ahmad Mufti, N.; Al-Ahmari, A. M.; He, Y. On the Investigation of Surface Integrity of Ti6Al4V ELI Using Si-Mixed Electric Discharge Machining. Materials (Basel). 2020, 13(7), 1549. DOI: https://doi.org/10.3390/ma13071549.
- Yeh, C. C.; Wu, K. L.; Lee, J. W.; Yan, B. H. Study on Surface Characteristics Using Phosphorous Dielectric on Wire Electrical Discharge Machining of Polycrystalline Silicon. Int. J. Adv. Manuf. Technol. 2013, 69(1–4), 71–80. DOI: https://doi.org/10.1007/s00170-013-4995-9.
- Maher, I.; Sarhan, A. A. D.; Marashi, H.; Barzani, M. M.; Hamdi, M. White Layer Thickness Prediction in Wire-EDM Using CuZn-Coated Wire Electrode – ANFIS Modelling. Trans. Inst. Met. Finish. 2016, 94(4), 204–210. DOI: https://doi.org/10.1080/00202967.2016.1180847.
- Marashi, H.; Ahmed, A. D. S.; Maher, I.; Sayuti, M.; Hamdi, M. Enhanced Surface Roughness of AISI D2 Steel Machined Using Nanopowder Mixed Electrical Discharge Machining. In Proceedings of Malaysian International Tribology Conference, Penang, Malaysia, 2015; pp 242–243.
- Ishfaq, K.; Asad, M.; Anwar, S.; Pruncu, C. I.; Saleh, M.; Ahmad, S. A Comprehensive Analysis of the Effect of Graphene-Based Dielectric for Sustainable Electric Discharge Machining of Ti-6Al-4V. Materials (Basel). 2020, 14(1), 23. DOI: https://doi.org/10.3390/ma14010023.
- Faisal, N.; Kumar, K. Optimization of Machine Process Parameters in EDM for EN 31 Using Evolutionary Optimization Techniques. Technologies. 2018, 6(2), 54. DOI: https://doi.org/10.3390/technologies6020054.
- Feng, C. C.; Li, L.; Zhang, C. S.; Zheng, G. M.; Bai, X.; Niu, Z. W. Surface Characteristics and Hydrophobicity of Ni-Ti Alloy through Magnetic Mixed Electrical Discharge Machining. Materials (Basel). 2019, 12(3), 388. DOI: https://doi.org/10.3390/ma12030388.
- Klocke, F.; Schwade, M.; Klink, A.; Veselovac, D.; Kopp, A. Influence of Electro Discharge Machining of Biodegradable Magnesium on the Biocompatibility. Procedia CIRP. 2013, 5, 88–93. DOI: https://doi.org/10.1016/j.procir.2013.01.018.
- Chaudhari, R.; Vora, J. J.; Patel, V.; de Lacalle, L. N. L.; Parikh, D. M. Effect of Wedm Process Parameters on Surface Morphology of Nitinol Shape Memory Alloy. Materials (Basel). 2020, 13(21), 4943. DOI: https://doi.org/10.3390/ma13214943.
- Gupta, K.; Gupta, M. K. Developments in Nonconventional Machining for Sustainable Production: A State-of-the-Art Review. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2019, 233(12), 4213–4232. DOI: https://doi.org/10.1177/0954406218811982.
- Singh, R.; Singh, R. P.; Trehan, R. State of the Art in Processing of Shape Memory Alloys with Electrical Discharge Machining: A Review. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2021, 235(3), 333–366. DOI: https://doi.org/10.1177/0954405420958771.
- Kataoka, Y.; Higuchi, D.; Baba, K.; Miyazaki, T. Quality of Newly Formed Bone on Titanium Implants Processed by Wire-Type Electric Discharge Machining. Clin. Oral Implants Res. 2017, 28(Poster), 31. DOI: https://doi.org/10.1111/clr.30_13042.
- Kataoka, Y.; Yamaguchi, K.; Ishiura, Y.; Higuchi, D.; Miyazaki, T. Bone Substance on Titanium by Wire-Type Electric Discharge Machining. Clin. Oral Implants Res. 2018, 29(Poster), 241. DOI: https://doi.org/10.1111/clr.126_13358.
- Kulkarni, V. N.; Gaitonde, V. N.; Karnik, S. R.; Manjaiah, M.; Paulo Davim, J. Machinability Analysis and Optimization in Wire EDM of Medical Grade NiTiNOL Memory Alloy. Materials (Basel). 2020, 13(9), 2184. DOI: https://doi.org/10.3390/ma13092184.
- Rao, K. V.; Raju, L. R.; Kumar, C. K. Modeling of Kerf Width and Surface Roughness in Wire Cut Electric Discharge Machining of Ti-6Al-4V. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. 2020, 234(6), 533–542. DOI: https://doi.org/10.1177/0954408920932369.
- Majumder, H.; Maity, K. Effect of Electrode Material on Cut Qualities of Shape Memory Alloy during Wedm: A Comparative Study. Surf. Rev. Lett. 2020, 27(4), 1950136. DOI: https://doi.org/10.1142/S0218625X19501361.
- Mohapatra, K. D.; Sahoo, S. K. Microstructural Analysis of Titanium Alloy Gear Using Wedm Process. Surf. Rev. Lett. 2018, 25(6), 1850112. DOI: https://doi.org/10.1142/S0218625X18501123.
- Maher, I.; Sarhan, A. A. D.; Marashi, H. Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process. Compr. Mater. Finish. 2017, 1, 231–266. DOI: https://doi.org/10.1016/B978-0-12-803581-8.09154-2.
- Soni, H.; Narendranath, N. S.; Ramesh, M. Experimental Investigation on Effects of Wire Electro Discharge Machining of Ti50Ni45Co5 Shape Memory Alloys. Silicon. 2018, 10(6), 2483–2490. DOI: https://doi.org/10.1007/s12633-018-9780-9.
- Sharma, N.; Singh, G.; Gupta, M.; Hegab, H.; Mia, M. Investigations of Surface Integrity, Bio-Activity and Performance Characteristics during Wire-Electrical Discharge Machining of Ti-6Al-7Nb Biomedical Alloy. Mater. Res. Express. 2019, 6(9), 096568. DOI: https://doi.org/10.1088/2053-1591/ab3094.
- Manjaiah, M.; Narendranath, S.; Basavarajappa, S.; Gaitonde, V. N. Wire Electric Discharge Machining Characteristics of Titanium Nickel Shape Memory Alloy. Trans. Nonferrous Met. Soc. China. 2014, 24(10), 3201–3209. DOI: https://doi.org/10.1016/S1003-6326(14)63461-0.
- Razak, D.; Syahrullail, S.; Nuraliza, N.; Azli, Y.; Sapawe, S. Surface Modification of Biomaterial Embedded with Pits Using Die Sinker Machine. Scientia Iranica. 2017, 24(4), 1901-1911.
- Mahajan, A.; Singh, G.; Devgan, S.; Sidhu, S. S. EDM Performance Characteristics and Electrochemical Corrosion Analysis of Co-Cr Alloy and Duplex Stainless Steel: A Comparative Study. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. 2020, 095440892097673. DOI: https://doi.org/10.1177/0954408920976739.
- İnan, Ö.; Acar, A.; Halkacı, S. Effects of Sandblasting and Electrical Discharge Machining on Porcelain Adherence to Cast and Machined Commercially Pure Titanium. J. Biomed. Mater. Res. Part B Appl. Biomater. 2006, 78B(2), 393–400. DOI: https://doi.org/10.1002/jbm.b.30500.
- Lorenz, M.; Schimmelpfennig, T. M. Process Optimization by Transferring Conventional Electrical Discharge Machining to near Dry Proceedings for Precise Bore Hole in CoCrMo. In 2019 International Interdisciplinary PhD Workshop (IIPhDW), Wismar, Germany, 2019; pp 57–61. 10.1109/IIPHDW.2019.8755422.
- Ali, S. M.;. Influence of Electrodes and Parameters on Micro-EDM Drilling Performances of 304L Stainless Steel. In 2019 2nd International Conference on Engineering Technology and its Applications (IICETA), Al-Najef, Iraq, 2019; pp 55–60. 10.1109/IICETA47481.2019.9012975.
- Maity, K. P.; Choubey, M. A Review on Vibration-Assisted EDM, Micro-EDM and WEDM. Surf. Rev. Lett. 2019, 26(5), 1830008. DOI: https://doi.org/10.1142/S0218625X18300083.
- Jahan, M. P.; Alavi, F. A Study on the Surface Composition and Migration of Materials and Their Effect on Surface Microhardness during Micro-EDM of Ti-6Al-4V. J. Mater. Eng. Perform. 2019, 28(6), 3517–3530. DOI: https://doi.org/10.1007/s11665-019-04120-0.
- Oza, A. D.; Kumar, A.; Badheka, V.; Arora, A. Traveling Wire Electrochemical Discharge Machining (TW-ECDM) of Quartz Using Zinc Coated Brass Wire: Investigations on Material Removal Rate and Kerf Width Characteristics. Silicon. 2019, 11(6), 2873–2884. DOI: https://doi.org/10.1007/s12633-019-0070-y.
- Mohanty, S.; Bhushan, B.; Das, A. K.; Dixit, A. R. Production of Hard and Lubricating Surfaces on Miniature Components through Micro-EDM Process. Int. J. Adv. Manuf. Technol. 2019, 105(5–6), 1983–2000. DOI: https://doi.org/10.1007/s00170-019-04380-z.
- Shen, Y.; Liu, Y.; Dong, H.; Zhang, K.; Lv, L.; Zhang, X.; Zheng, C.; Ji, R. Parameters Optimization for Sustainable Machining of Ti6Al4V Using a Novel High-Speed Dry Electrical Discharge Milling. Int. J. Adv. Manuf. Technol. 2017, 90(9–12), 2733–2740. DOI: https://doi.org/10.1007/s00170-016-9600-6.
- Vignesh, M.; Ramanujam, R. Numerical Modelling and Experimental Validation of Crater Formation in WEDM Hybrid Turning of Ti-6Al-4V Alloy. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. 2020, 095440892096468. DOI: https://doi.org/10.1177/0954408920964687.
- Kumar, K.; Singh, V.; Katyal, P.; Sharma, N. EDM μ-Drilling in Ti-6Al-7Nb: Experimental Investigation and Optimization Using NSGA-II. Int. J. Adv. Manuf. Technol. 2019, 104(5–8), 2727–2738. DOI: https://doi.org/10.1007/s00170-019-04012-6.
- Bains, P. S.; Mahajan, R.; Sidhu, S. S.; Kaur, S. Experimental Investigation of Abrasive Assisted Hybrid EDM of Ti-6Al-4V. J. Micromanuf. 2019, 2(2), 123–132. DOI: https://doi.org/10.1177/2516598419833498.
- Bose, S.; Nandi, T. Statistical and Experimental Investigation Using a Novel Multi-Objective Optimization Algorithm on a Novel Titanium Hybrid Composite Developed by Lens Process. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2020, 095440622095910. DOI: https://doi.org/10.1177/0954406220959101.
- Modica, F.; Marrocco, V.; Copani, G.; Fassi, I. Sustainable Micro-Manufacturing of Micro-Components via Micro Electrical Discharge Machining. Sustainability. 2011, 3(12), 2456–2469. DOI: https://doi.org/10.3390/su3122456.
- Jabbaripour, B.; Sadeghi, M. H.; Faridvand, S.; Shabgard, M. R. Investigating the Effects of EDM Parameters on Surface Integrity, MRR and TWR in Machining of Ti-6Al-4V. Mach. Sci. Technol. 2012, 16(3), 419–444. DOI: https://doi.org/10.1080/10910344.2012.698971.
- Tiwary, A. P.; Pradhan, B. B.; Bhattacharyya, B. Influence of Various Metal Powder Mixed Dielectric on Micro-EDM Characteristics of Ti-6Al-4V. Mater. Manuf. Process. 2019, 34(10), 1103–1119. DOI: https://doi.org/10.1080/10426914.2019.1628265.
- Karmiris-Obratański, P.; Zagórski, K.; Cieślik, J.; Papazoglou, E. L.; Markopoulos, A. Surface Topography of Ti 6Al 4V ELI after High Power EDM. Procedia Manuf. 2020, 47, 788–794. DOI: https://doi.org/10.1016/j.promfg.2020.04.242.
- Shabgard, M.; Khosrozadeh, B. Investigation of Carbon Nanotube Added Dielectric on the Surface Characteristics and Machining Performance of Ti–6Al–4V Alloy in EDM Process. J. Manuf. Process. 2017, 25, 212–219. DOI: https://doi.org/10.1016/j.jmapro.2016.11.016.
- Sales, W. F.; Oliveira, A. R. F.; Raslan, A. A. Titanium Perovskite (Catio3) Formation in Ti6Al4V Alloy Using the Electrical Discharge Machining Process for Biomedical Applications. Surf. Coatings Technol. 2016, 307, 1011–1015. DOI: https://doi.org/10.1016/j.surfcoat.2016.10.028.
- Razak, M. A.; Abdul-Rani, A. M.; Rao, T. V. V. L. N.; Pedapati, S. R.; Kamal, S. Electrical Discharge Machining on Biodegradable AZ31 Magnesium Alloy Using Taguchi Method. Procedia Engineering. 2016, 148, 916–922. DOI: https://doi.org/10.1016/j.proeng.2016.06.501.
- Chakraborty, S.; Mitra, S.; Bose, D. Modeling & Analysis of B4C Powder Mixed Wire EDM Process for Improving Performance Criteria of Ti6Al4V. IOP Conf. Ser. Mater. Sci. Eng. 2019, 653, 012006. DOI: https://doi.org/10.1088/1757-899X/653/1/012006.
- Abdudeen, A.; Qudeiri, J. E. A.; Kareem, A.; Ahammed, T.; Ziout, A. Recent Advances and Perceptive Insights into Powder-Mixed Dielectric Fluid of EDM. Micromachines. 2020, 11(8), 754. DOI: https://doi.org/10.3390/MI11080754.
- Ekmekci, N.; Ekmekci, B. Electrical Discharge Machining of Ti6Al4V in Hydroxyapatite Powder Mixed Dielectric Liquid. Mater. Manuf. Process. 2016, 31(13), 1663–1670. DOI: https://doi.org/10.1080/10426914.2015.1090591.
- Ou, S. F.; Wang, C. Y. Effects of Bioceramic Particles in Dielectric of Powder-Mixed Electrical Discharge Machining on Machining and Surface Characteristics of Titanium Alloys. J. Mater. Process. Technol. 2017, 245, 70–79. DOI: https://doi.org/10.1016/j.jmatprotec.2017.02.018.
- Prakash, C.; Kansal, H. K.; Pabla, B. S.; Puri, S. On the Influence of Nanoporous Layer Fabricated by PMEDM on β-Ti Implant: Biological and Computational Evaluation of Bone-Implant Interface. Mater. Today Proc. 2017, 4, 2298–2307. DOI: https://doi.org/10.1016/j.matpr.2017.02.078.
- Kumar, S.; Batra, U. Surface Modification of Die Steel Materials by EDM Method Using Tungsten Powder-Mixed Dielectric. J. Manuf. Process. 2012, 14(1), 35–40. DOI: https://doi.org/10.1016/j.jmapro.2011.09.002.
- Öpöz, T. T.; Yaşar, H.; Ekmekci, N.; Ekmekci, B. Particle Migration and Surface Modification on Ti6Al4V in SiC Powder Mixed Electrical Discharge Machining. J. Manuf. Process. 2018, 31, 744–758. DOI: https://doi.org/10.1016/j.jmapro.2018.01.002.
- Liqing, L.; Yingjie, S. Study of Dry EDM with Oxygen-Mixed and Cryogenic Cooling Approaches. Procedia CIRP. 2013, 6, 344–350. DOI: https://doi.org/10.1016/j.procir.2013.03.055.
- Kunieda, M.; Yoshida, M.; Taniguchi, N. Electrical Discharge Machining in Gas. CIRP Ann. Manuf. Technol. 1997, 46(1), 143–146. DOI: https://doi.org/10.1016/s0007-8506(07)60794-x.
- Kao, C. C.; Tao, J.; Shih, A. J. Near Dry Electrical Discharge Machining. Int. J. Mach. Tools Manuf. 2007, 47(15), 2273–2281. DOI: https://doi.org/10.1016/j.ijmachtools.2007.06.001.
- Tao, J.; Shih, A. J.; Ni, J. Experimental Study of the Dry and Near-Dry Electrical Discharge Milling Processes. J. Manuf. Sci. Eng. Trans. ASME. 2008, 130(1), 0110021–0110029. DOI: https://doi.org/10.1115/1.2784276.
- Talla, G.; Gangopadhayay, S.; Biswas, C. State of the Art in Powder-Mixed Electric Discharge Machining: A Review. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2017, 231(14), 2511–2526. DOI: https://doi.org/10.1177/0954405416634265.
- Bai, X.; Zhang, Q. H.; Yang, T. Y.; Zhang, J. H. Research on Material Removal Rate of Powder Mixed near Dry Electrical Discharge Machining. Int. J. Adv. Manuf. Technol. 2013, 68(5–8), 1757–1766. DOI: https://doi.org/10.1007/s00170-013-4973-2.
- Singh, T.; Misra, J. P.; Singh, B. Experimental Investigation of Influence of Process Parameters on MRR during WEDM of Al6063 Alloy. Mater. Today Proc. 2017, 4, 2242–2247. DOI: https://doi.org/10.1016/j.matpr.2017.02.071.
- Sundriyal, S.; Walia, R. S.; Vipin,; Tyagi, M. Investigation on Surface Finish in Powder Mixed near Dry Electric Discharge Machining Method. Mater. Today Proc. 2019, 25, 804–809. DOI: https://doi.org/10.1016/j.matpr.2019.09.031.
- Bai, X.; Zhang, Q.; Zhang, J.; Kong, D.; Yang, T. Machining Efficiency of Powder Mixed near Dry Electrical Discharge Machining Based on Different Material Combinations of Tool Electrode and Workpiece Electrode. J. Manuf. Process. 2013, 15(4), 474–482. DOI: https://doi.org/10.1016/j.jmapro.2013.09.005.
- Sundriyal, S.; Walia, R. S.; Vipin. Powder Mixed near Dry Electric Discharge Machining Parameter Optimization for Tool Wear Rate. In Advances in Unconventional Machining and Composites. Lecture Notes on Multidisciplinary Industrial Engineering; Shunmugam, M., Kanthababu, M., Eds.; Springer: Singapore, 2020; pp 3–16. DOI: https://doi.org/10.1007/978-981-32-9471-4_1.
- Sultan, T.; Kumar, A.; Gupta, R. D. Material Removal Rate, Electrode Wear Rate, and Surface Roughness Evaluation in Die Sinking EDM with Hollow Tool through Response Surface Methodology. Int. J. Manuf. Eng. 2014, 2014, 1–16. DOI: https://doi.org/10.1155/2014/259129.
- Straka, Ľ.; Hašová, S. Optimization of Material Removal Rate and Tool Wear Rate of Cu Electrode in Die-Sinking EDM of Tool Steel. Int. J. Adv. Manuf. Technol. 2018, 97(5–8), 2647–2654. DOI: https://doi.org/10.1007/s00170-018-2150-3.
- Gaikwad, V.; Jatti, V. K. S.; Optimization of Material Removal Rate during Electrical Discharge Machining of Cryo-Treated NiTi Alloys Using Taguchi’s Method. J. King Saud Univ. - Eng. Sci. 2018, 30(3), 266–272. DOI:https://doi.org/10.1016/j.jksues.2016.04.003.
- Kumar, S.; Singh, R.; Batish, A.; Singh, T. Modeling the Tool Wear Rate in Powder Mixed Electro-Discharge Machining of Titanium Alloys Using Dimensional Analysis of Cryogenically Treated Electrodes and Workpiece. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. 2017, 231(2), 271–282. DOI: https://doi.org/10.1177/0954408915593875.
- Praveen, L.; Geeta Krishna, P.; Venugopal, L.; Prasad, N. E. C. Effects of Pulse on and off Time and Electrode Types on the Material Removal Rate and Tool Wear Rate of the Ti-6Al-4V Alloy Using EDM Machining with Reverse Polarity. IOP Conf. Ser. Mater. Sci. Eng. 2018, 330, 012083. DOI: https://doi.org/10.1088/1757-899X/330/1/012083.
- Wheeler, H. A.;; Formulas for the Skin Effect. Proc. IRE. 1942, 30(9), 412–424. DOI:https://doi.org/10.1109/JRPROC.1942.232015.
- Öpöz, T. T.; Ekmekci, B.; Erden, A. An Experimental Study on the Geometry of Microholes in Microelectric Discharge Machining. Mater. Manuf. Process. 2009, 24(12), 1236–1241. DOI: https://doi.org/10.1080/10426910903129422.
- Liu, Q.; Zhang, Q.; Zhu, G.; Wang, K.; Zhang, J.; Dong, C. Effect of Electrode Size on the Performances of Micro-EDM. Mater. Manuf. Process. 2016, 31(4), 391–396. DOI: https://doi.org/10.1080/10426914.2015.1059448.
- Chu, X.; Zhu, K.; Wang, C.; Hu, Z.; Zhang, Y. A Study on Plasma Channel Expansion in Micro-EDM. Mater. Manuf. Process. 2016, 31(4), 381–390. DOI: https://doi.org/10.1080/10426914.2015.1059445.
- Kar, S.; Patowari, P. K. Electrode Wear Phenomenon and Its Compensation in Micro Electrical Discharge Milling: A Review. Mater. Manuf. Processes. 2018, 33(14), 1491–1517. DOI: https://doi.org/10.1080/10426914.2018.1453144.
- Mondal, G.; Surekha, B.; Dev Choudhury, S. Investigation on the Influence of Different Powder Mixed Dielectric in Electric Discharge Machining. Mater. Today Proc. 2018, 5, 18281–18286. DOI: https://doi.org/10.1016/j.matpr.2018.06.166.
- Dewangan, S.; Biswas, C. K.; Gangopadhyay, S. Influence of Different Tool Electrode Materials on EDMed Surface Integrity of AISI P20 Tool Steel. Mater. Manuf. Process. 2014, 29(11–12), 1387–1394. DOI: https://doi.org/10.1080/10426914.2014.930892.
- Feng, W.; Chu, X.; Hong, Y.; Zhang, L. Studies on the Surface of High-Performance Alloys Machined by Micro-EDM. Mater. Manuf. Process. 2018, 33(6), 616–625. DOI: https://doi.org/10.1080/10426914.2017.1364758.
- Urso, G. D.; Ravasio, C.; The Effects of Electrode Size and Discharged Power on Micro-Electro-Discharge Machining Drilling of Stainless Steel. Res. Artic. Adv. Mech. Eng. 2016, 8(5), 1–12. DOI:https://doi.org/10.1177/1687814016648646.
- Tiwary, A. P.; Pradhan, B. B.; Bhattacharyya, B. Study on the Influence of Micro-EDM Process Parameters during Machining of Ti–6Al–4V Superalloy. Int. J. Adv. Manuf. Technol. 2014, 76(1–4), 151–160. DOI: https://doi.org/10.1007/s00170-013-5557-x.
- Wang, K.; Zhang, Q.; Zhu, G.; Zhang, J. Effects of Tool Electrode Size on Surface Characteristics in Micro-EDM. Int. J. Adv. Manuf. Technol. 2018, 96(9–12), 3909–3916. DOI: https://doi.org/10.1007/s00170-018-1775-6.
- Wang, K.; Zhang, Q.; Zhu, G.; Huang, Y.; Zhang, J. Influence of Tool Size on Machining Characteristics of Micro-EDM. Procedia CIRP. 2018, 68, 604–609. DOI: https://doi.org/10.1016/j.procir.2017.12.122.
- Muthuramalingam, T.; Mohan, B. Performance Analysis of Iso Current Pulse Generator on Machining Characteristics in EDM Process. Arch. Civ. Mech. Eng. 2014, 14(3), 383–390. DOI: https://doi.org/10.1016/j.acme.2013.10.003.
- Moghanizadeh, A.;. Reducing Side Overcut in EDM Process by Changing Electrical Field between Tool and Work Piece. Int. J. Adv. Manuf. Technol. 2017, 90(1–4), 1035–1042. DOI: https://doi.org/10.1007/s00170-016-9427-1.
- Jahan, M. P.;. Electro-Discharge Machining (EDM). In Modern Manufacturing Processes; Koç, M., Özel, T., Eds.; John Wiley & Sons: Hoboken, NJ, USA, 2019; pp 377–409.
- Muthuramalingam, T.;. Effect of Diluted Dielectric Medium on Spark Energy in Green EDM Process Using TGRA Approach. J. Clean. Prod. 2019, 238, 117894. DOI: https://doi.org/10.1016/j.jclepro.2019.117894.
- D’Urso, G.; Maccarini, G.; Ravasio, C. Influence of Electrode Material in Micro-EDM Drilling of Stainless Steel and Tungsten Carbide. Int. J. Adv. Manuf. Technol. 2016, 85(9–12), 2013–2025. DOI: https://doi.org/10.1007/s00170-015-7010-9.
- Kuriachen, B.; Mathew, J. Effect of Powder Mixed Dielectric on Material Removal and Surface Modification in Microelectric Discharge Machining of Ti-6Al-4V. Mater. Manuf. Process. 2016, 31(4), 439–446. DOI: https://doi.org/10.1080/10426914.2015.1004705.
- Kuriachen, B.; Mathew, J. Experimental Investigations into the Effects of Microelectric-Discharge Milling Process Parameters on Processing Ti-6Al-4V. Mater. Manuf. Process. 2015, 30(8), 983–990. DOI: https://doi.org/10.1080/10426914.2014.984206.
- Hassanin, H.; Modica, F.; El-Sayed, M. A.; Liu, J.; Essa, K. Manufacturing of Ti-6Al-4V Micro-Implantable Parts Using Hybrid Selective Laser Melting and Micro-Electrical Discharge Machining. Adv. Eng. Mater. 2016, 18(9), 1544–1549. DOI: https://doi.org/10.1002/adem.201600172.
- Sahu, A. K.; Mahapatra, S. S. Performance Analysis of Tool Electrode Prepared through Laser Sintering Process during Electrical Discharge Machining of Titanium. Int. J. Adv. Manuf. Technol. 2020, 106(3–4), 1017–1041. DOI: https://doi.org/10.1007/s00170-019-04675-1.
- Jahare, M. H.; Idris, M. H.; Hassim, M. H. Effect of WEDM Parameters on Material Removal Rate and Kerf’s Width of Cobalt Chromium Molybdenum Using Full Factorials Design. Adv. Mater. Process. Technol. 2020, null, 1–14. DOI: https://doi.org/10.1080/2374068X.2020.1829949.
- Das, A.; Sarkar, S.; Karanjai, M.; Sutradhar, G.; Application of Box-Behnken Design and Response Surface Methodology for Surface Roughness Prediction Model of CP-TI Powder Metallurgy Components through WEDM. J. Inst. Eng. Ser. D. 2017, 99(1), 9–21. DOI:https://doi.org/10.1007/s40033-017-0145-0.
- Rahul,; Mishra, D. K.; Datta, S.; Masanta, M. Effects of Tool Electrode on EDM Performance of Ti-6Al-4V. Silicon. 2018, 10(5), 2263–2277. DOI: https://doi.org/10.1007/s12633-018-9760-0.
- Kunieda, M.; Lauwers, B.; Rajurkar, K. P.; Schumacher, B. M. Advancing EDM through Fundamental Insight into the Process. CIRP Ann. Manuf. Technol. 2005, 54(2), 64–87. DOI: https://doi.org/10.1016/s0007-8506(07)60020-1.
- Kern, R.;. Sinker Electrode Material Selection. EDM Today 2008, 4, 32–38.
- Erçetin, A.; Aslantas, K.; Özgün, Ö. Micro-End Milling of Biomedical Tz54 Magnesium Alloy Produced through Powder Metallurgy. Mach. Sci. Technol. 2020, 24(6), 924–947. DOI: https://doi.org/10.1080/10910344.2020.1771572.
- Marco, F.; Milena, F.; Gianluca, G.; Vittoria, O. Peri-Implant Osteogenesis in Health and Osteoporosis. Micron. 2005, 36(7–8), 630–644. DOI: https://doi.org/10.1016/j.micron.2005.07.008.
- Ball, M.; Grant, D. M.; Lo, W. J.; Scotchford, C. A. The Effect of Different Surface Morphology and Roughness on Osteoblast-like Cells. J. Biomed. Mater. Res. Part A. 2008, 86(3), 637–647. DOI: https://doi.org/10.1002/jbm.a.31652.
- Segan, S.; Jakobi, M.; Khokhani, P.; Klimosch, S.; Billing, F.; Schneider, M.; Martin, D.; Metzger, U.; Biesemeier, A.; Xiong, X.;, et al. Systematic Investigation of Polyurethane Biomaterial Surface Roughness on Human Immune Responses in Vitro. Biomed Res. Int. 2020, 2020, 3481549. DOI: https://doi.org/10.1155/2020/3481549.
- Aigner, T. B.; DeSimone, E.; Scheibel, T. Biomedical Applications of Recombinant Silk-Based Materials. Adv. Mater. 2018, 30(19), 1704636. DOI: https://doi.org/10.1002/adma.201704636.
- Jo, Y. K.; Choi, B.; Kim, C. S.; Cha, H. J. Diatom‐Inspired Silica Nanostructure Coatings with Controllable Microroughness Using an Engineered Mussel Protein Glue to Accelerate Bone Growth on Titanium‐Based Implants. Adv. Mater. 2017, 29(46), 1704906. DOI: https://doi.org/10.1002/adma.201704906.
- Chen, S. L.; Lin, M. H.; Chen, C. C.; Ou, K. L. Effect of Electro-Discharging on Formation of Biocompatible Layer on Implant Surface. J. Alloys Compd. 2008, 456(1–2), 413–418. DOI: https://doi.org/10.1016/j.jallcom.2007.02.055.
- Prakash, C.; Kansal, H. K.; Pabla, B.; Puri, S.; Aggarwal, A. Electric Discharge Machining – A Potential Choice for Surface Modification of Metallic Implants for Orthopedic Applications: A Review. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2016, 230(2), 331–353. DOI: https://doi.org/10.1177/0954405415579113.
- Otsuka, F.; Kataoka, Y.; Miyazaki, T.; Enhanced Osteoblast Response to Electrical Discharge Machining Surface. Dent. Mater. J. 2012, 31(2), 309–315. DOI:https://doi.org/10.4012/dmj.2011-039.
- Stráský, J.; Havlíková, J.; Bačáková, L.; Harcuba, P.; Mhaede, M.; Janeček, M. Characterization of Electric Discharge Machining, Subsequent Etching and Shot-Peening as a Surface Treatment for Orthopedic Implants. Appl. Surf. Sci. 2013, 281, 73–78. DOI: https://doi.org/10.1016/j.apsusc.2013.02.053.
- Havlikova, J.; Strasky, J.; Vandrovcova, M.; Harcuba, P.; Mhaede, M.; Janecek, M.; Bacakova, L. Innovative Surface Modification of Ti-6Al-4V Alloy with a Positive Effect on Osteoblast Proliferation and Fatigue Performance. Mater. Sci. Eng. C. 2014, 39(1), 371–379. DOI: https://doi.org/10.1016/j.msec.2014.03.024.
- Varun, A.; Venkaiah, N. Grey Relational Analysis Coupled with Firefly Algorithm for Multiobjective Optimization of Wire Electric Discharge Machining. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2015, 229(8), 1385–1394. DOI: https://doi.org/10.1177/0954405414535591.
- Saha, S.; Ball, A. K.; Mukherjee, A.; Das, A.; Halder, S.; Hanumaiah, N. Optimization of Electrochemical Etching Process for Manufacturing of Micro Electrodes for Micro-EDM Application. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2020, 095440542095896. DOI: https://doi.org/10.1177/0954405420958961.
- Sahu, A. K.; Thomas, J.; Mahapatra, S. S. An Intelligent Approach to Optimize the Electrical Discharge Machining of Titanium Alloy by Simple Optimization Algorithm. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. 2020, 095440892096468. DOI: https://doi.org/10.1177/0954408920964685.
- Bhosale, R. B.; Dabade, B. M.; Multi-Performance Optimisation of Micro Electro-Discharge Machining during Deep Micro-Slots Fabrication Using Foil Tool Electrode. Int. J. Precis. Technol. 2017, 7(2/3/4), 237–250. DOI:https://doi.org/10.1504/ijptech.2017.090782.
- Tang, L.; Du, Y. T. Multi-Objective Optimization of Green Electrical Discharge Machining Ti-6Al-4V in Tap Water via Grey-Taguchi Method. Mater. Manuf. Process. 2014, 29(5), 507–513. DOI: https://doi.org/10.1080/10426914.2013.840913.
- Lin, M. Y.; Tsao, C. C.; Huang, H. H.; Wu, C. Y.; Hsu, C. Y. Use of the Grey-Taguchi Method to Optimise the Micro-Electrical Discharge Machining (Micro-edm) of Ti-6Al-4V Alloy. Int. J. Comput. Integr. Manuf. 2015, 28(6), 569–576. DOI: https://doi.org/10.1080/0951192X.2014.880946.
- Oliver Nesa Raj, S.; Prabhu, S. Modeling and Analysis of Titanium Alloy in Wire-Cut EDM Using Grey Relation Coupled with Principle Component Analysis. Aust. J. Mech. Eng. 2017, 15(3), 198–209. DOI: https://doi.org/10.1080/14484846.2016.1251077.
- Kuriachen, B.; Lijesh, K. P.; Kuppan, P. Multi Response Optimization and Experimental Investigations into the Impact of Wire EDM on the Tribological Properties of Ti–6Al–4V. Trans. Indian Inst. Met. 2018, 71(6), 1331–1341. DOI: https://doi.org/10.1007/s12666-017-1267-7.
- Sahu, A. K.; Mahapatra, S. S. Prediction and Optimization of Performance Measures in Electrical Discharge Machining Using Rapid Prototyping Tool Electrodes. J. Intell. Manuf. 2020. DOI: https://doi.org/10.1007/s10845-020-01624-8.
- Rajput, V.; Pundir, S. S.; Goud, M.; Suri, N. M. Multi-Response Optimization of ECDM Parameters for Silica (Quartz) Using Grey Relational Analysis. Silicon. 2020. DOI: https://doi.org/10.1007/s12633-020-00538-7.
- Kuriachen, B.; Mathew, J. Spark Radius Modeling of Resistance-Capacitance Pulse Discharge in Micro-Electric Discharge Machining of Ti-6Al-4V: An Experimental Study. Int. J. Adv. Manuf. Technol. 2016, 85(9–12), 1983–1993. DOI: https://doi.org/10.1007/s00170-015-7999-9.
- Nguyen, H. P.; Ngo, N. V.; Nguyen, Q. T. Optimizing Process Parameters in Edm Using Low Frequency Vibration for Material Removal Rate and Surface Roughness. J. King Saud Univ. - Eng. Sci. 2020, DOI: https://doi.org/10.1016/j.jksues.2020.05.002.
- Priyadarshini, M.; Behera, A.; Swain, B.; Patel, S. Multi-Objective Optimization of EDM Process for Titanium Alloy. Mater. Today Proc. 2020, 33, 5526–5529. DOI: https://doi.org/10.1016/j.matpr.2020.03.492.
- Dewangan, S.; Deepak Kumar, S.; Kumar Jha, S.; Kumar Biswas, C. Optimization of Micro-EDM Drilling Parameters of Ti–6Al–4V Alloy. Mater. Today Proc. 2020, 33, 5481–5485. DOI: https://doi.org/10.1016/j.matpr.2020.03.307.
- Gugulothu, B.;. Optimization of Process Parameters on EDM of Titanium Alloy. Mater. Today Proc. 2020, 27, 257–262. DOI: https://doi.org/10.1016/j.matpr.2019.10.150.
- Kumari, S.; Sonia, P.; Singh, B.; Abhishek, K.; Saxena, K. K. Optimization of Surface Roughness in EDM of Pure Magnesium (Mg) Using TLBO. Mater. Today Proc. 2019, 26, 2458–2461. DOI: https://doi.org/10.1016/j.matpr.2020.02.523.
- Sapkal, S. U.; Jagtap, P. S. Optimization of Micro EDM Drilling Process Parameters for Titanium Alloy by Rotating Electrode. Procedia Manuf. 2018, 20, 119–126. DOI: https://doi.org/10.1016/j.promfg.2018.02.017.
- Dwivedi, A. P.; Choudhury, S. K. Effect of Tool Rotation on MRR, TWR, and Surface Integrity of AISI-D3 Steel Using the Rotary EDM Process. Mater. Manuf. Process. 2016, 31(14), 1844–1852. DOI: https://doi.org/10.1080/10426914.2016.1140198.
- Bhaumik, M.; Maity, K. Effect of Electrode Materials on Different EDM Aspects of Titanium Alloy. Silicon. 2019, 11(1), 187–196. DOI: https://doi.org/10.1007/s12633-018-9844-x.
- Kibria, G.; Bhattacharyya, B. 2017. Microelectrical Discharge Machining of Ti-6Al-4V: Implementation of Innovative Machining Strategies. In Microfabrication and Precision Engineering: Research and Development, Paulo Davim, J., Ed., 99–142. Woodhead Publishing: Singapore. doi:https://doi.org/10.1016/B978-0-85709-485-8.00004-8.
- Bahgat, M. M.; Shash, A. Y.; Abd-Rabou, M.; El-Mahallawi, I. S. Effects of Process Parameters on the Machining Process in Die-Sinking EDM of Alloyed Tool Steel. Adv. Struct. Mater. 2020, 124, 215–233. DOI: https://doi.org/10.1007/978-3-030-39062-4_19.
- Sivapirakasam, S. P.; Mathew, J.; Surianarayanan, M. Multi-Attribute Decision Making for Green Electrical Discharge Machining. Expert Syst. Appl. 2011, 38(7), 8370–8374. DOI: https://doi.org/10.1016/j.eswa.2011.01.026.
- Prakash, C.; Singh, S.; Singh, M.; Verma, K.; Chaudhary, B.; Singh, S. Multi-Objective Particle Swarm Optimization of EDM Parameters to Deposit HA-Coating on Biodegradable Mg-Alloy. Vacuum. 2018, 158, 180–190. DOI: https://doi.org/10.1016/j.vacuum.2018.09.050.
- Kumar, R.; Roy, S.; Gunjan, P.; Sahoo, A.; Sarkar, D. D.; Das, R. K. Analysis of MRR and Surface Roughness in Machining Ti-6Al-4V ELI Titanium Alloy Using EDM Process. Procedia Manuf. 2018, 20, 358–364. DOI: https://doi.org/10.1016/j.promfg.2018.02.052.
- Rajamanickam, S.; Prasanna, J. Multi Objective Optimization during Small Hole Electrical Discharge Machining (EDM) of Ti-6Al-4V Using TOPSIS. Mater. Today Proc. 2019, 18, 3109–3115. DOI: https://doi.org/10.1016/j.matpr.2019.07.184.
- Sivaprakasam, P.; Hariharan, P.; Gowri, S. Modeling and Analysis of Micro-WEDM Process of Titanium Alloy (Ti–6al–4v) Using Response Surface Approach. Eng. Sci. Technol. Int. J. 2014, 17(4), 227–235. DOI: https://doi.org/10.1016/j.jestch.2014.06.004.
- Mohanty, S.; Mishra, A.; Nanda, B. K.; Routara, B. C. Multi-Objective Parametric Optimization of Nano Powder Mixed Electrical Discharge Machining of AlSiCp Using Response Surface Methodology and Particle Swarm Optimization. Alexandria Eng. J. 2018, 57(2), 609–619. DOI: https://doi.org/10.1016/j.aej.2017.02.006.
- Naik, S.; Das, S. R.; Dhupal, D. Experimental Investigation, Predictive Modeling, Parametric Optimization and Cost Analysis in Electrical Discharge Machining of Al-SiC Metal Matrix Composite. Silicon. 2020. DOI: https://doi.org/10.1007/s12633-020-00482-6.
- Kuriachen, B.; Somashekhar, K. P.; Mathew, J. Multiresponse Optimization of Micro-Wire Electrical Discharge Machining Process. Int. J. Adv. Manuf. Technol. 2014, 76(1–4), 91–104. DOI: https://doi.org/10.1007/s00170-014-6005-2.
- Pantula, P. D.; Mitra, K. Towards Efficient Robust Optimization Using Data Based Optimal Segmentation of Uncertain Space. Reliab. Eng. Syst. Saf. 2020, 197, 106821. DOI: https://doi.org/10.1016/j.ress.2020.106821.
- Inapakurthi, R. K.; Pantula, P. D.; Miriyala, S. S.; Mitra, K. Data Driven Robust Optimization of Grinding Process under Uncertainty. Mater. Manuf. Processes 2020, 35(16), 1870–1876.
- Pantula, P. D.; Mitra, K. A Data-driven Approach Towards Finding Closer Estimates of Optimal Solutions under Uncertainty for an Energy Efficient Steel Casting Process. Energy. 2019, 189, 116253. DOI: https://doi.org/10.1016/j.energy.2019.116253.
- Inapakurthi, R. K.; Miriyala, S. S.; Mitra, K. Recurrent Neural Networks Based Modelling of Industrial Grinding Operation. Chem. Eng. Sci. 2020, 219, 115585. DOI: https://doi.org/10.1016/j.ces.2020.115585.
- Miriyala, S. S.; Mitra, K. Deep Learning Based System Identification of Industrial Integrated Grinding Circuits. Powder Technol. 2020, 360, 921–936. DOI: https://doi.org/10.1016/j.powtec.2019.10.065.
- Kumar, K.; Gill, R. S.; Batra, U. Challenges and Opportunities for Biodegradable Magnesium Alloy Implants. Mater. Technol. 2018, 33(2), 153–172. DOI: https://doi.org/10.1080/10667857.2017.1377973.
- Ding, W.;. Opportunities and Challenges for the Biodegradable Magnesium Alloys as Next-generation Biomaterials. Regener. Biomater. 2016, 3(2), 79–86. DOI: https://doi.org/10.1093/rb/rbw003.
- Al-Amin, M.; Abdul Rani, A. M.; Abdu Aliyu, A. A.; Abdul Razak, M. A.; Hastuty, S.; Bryant, M. G. Powder Mixed-EDM for Potential Biomedical Applications: A Critical Review. Mater. Manuf. Processes. 2020, 35(16), 1789–1811. DOI: https://doi.org/10.1080/10426914.2020.1779939.
- Al-Amin, M.; Abdul Rani, A. M.; Abdu Aliyu, A. A.; Bryant, M. G.; Danish, M.; Ahmad, A. Bio-Ceramic Coatings Adhesion and Roughness of Biomaterials through PM-EDM: A Comprehensive Review. Mater. Manuf. Processes. 2020, 35(11), 1157–1180. DOI: https://doi.org/10.1080/10426914.2020.1772483.
- Demir, A. G.; Previtali, B.; Ge, Q.; Vedani, M.; Wu, W.; Migliavacca, F.; Petrini, L.; Biffi, C. A.; Bestetti, M. Biodegradable Magnesium Coronary Stents: Material, Design and Fabrication. Int. J. Comput. Integr. Manuf. 2014, 27(10), 936–945. DOI: https://doi.org/10.1080/0951192X.2013.834475.
- Mahajan, A.; Sidhu, S. S. Surface Modification of Metallic Biomaterials for Enhanced Functionality: A Review. Mater. Technol. 2018, 33(2), 93–105. DOI: https://doi.org/10.1080/10667857.2017.1377971.
- Linehan, A. D.; Windeler, A. S. Passive Fit of Implant-Retained Prosthetic Superstructures Improved by Electric Discharge Machining. J. Prosthodont. 1994, 3(2), 88–95. DOI: https://doi.org/10.1111/j.1532-849X.1994.tb00134.x.
- Gill, A. S.; Kumar, S. Surface Roughness and Microhardness Evaluation for EDM with Cu-Mn Powder Metallurgy Tool. Mater. Manuf. Process. 2016, 31(4), 514–521. DOI: https://doi.org/10.1080/10426914.2015.1070412.
- Mandal, P.; Mondal, S. C. Surface Characteristics of Mild Steel Using EDM with Cu-MWCNT Composite Electrode. Mater. Manuf. Process. 2019, 34(12), 1326–1332. DOI: https://doi.org/10.1080/10426914.2019.1605179.
- Manonmani, R.; Vinodhini, S. P.; Venkatachalapathy, B.; Sridhar, T. M. Electrochemical, Mechanical and Osseointegration Evaluation of NBPC-Coated 316L SS by EPD. Surf. Eng. 2018, 34(7), 511–519. DOI: https://doi.org/10.1080/02670844.2017.1341224.
- Ahmed, A.;. Deposition and Analysis of Composite Coating on Aluminum Using Ti-B 4C Powder Metallurgy Tools in EDM. Mater. Manuf. Process. 2016, 31(4), 467–474. DOI: https://doi.org/10.1080/10426914.2015.1025967.
- Singh, R.; Dvivedi, A.; Kumar, P. EDM of High Aspect Ratio Micro-Holes on Ti-6Al-4V Alloy by Synchronizing Energy Interactions. Mater. Manuf. Process. 2020, 35(11), 1188–1203. DOI: https://doi.org/10.1080/10426914.2020.1762207.
- Batish, A.; Bhattacharya, A.; Kumar, N. Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM. Part. Sci. Technol. 2015, 33(2), 150–158. DOI: https://doi.org/10.1080/02726351.2014.947659.
- Peças, P.; Henriques, E. Effect of the Powder Concentration and Dielectric Flow in the Surface Morphology in Electrical Discharge Machining with Powder-Mixed Dielectric (PMD-EDM). Int. J. Adv. Manuf. Technol. 2008, 37(11–12), 1120–1132. DOI: https://doi.org/10.1007/s00170-007-1061-5.
- Hameed, A. S.; Hamdoon, F. O.; Jafar, M. S. Influence of Powder Mixed EDM on the Surface Hardness of Die Steel. IOP Conf. Ser. Mater. Sci. Eng. 2019, 518, 032030. DOI: https://doi.org/10.1088/1757-899X/518/3/032030.
- Parkash, V.; Kumar, D.; Effect of Powder Mixed Dielectric Medium on Tool Wear Rate in EDM. IJSR-Int. J. Sci. Res. 2013, 2(2), 107–109. DOI:https://doi.org/10.15373/22778179/FEB2013/38.
- Klocke, F.; Schwade, M.; Klink, A.; Kopp, A. EDM Machining Capabilities of Magnesium (Mg) Alloy WE43 for Medical Applications. Procedia Engineering. 2011, 19, 190–195. DOI: https://doi.org/10.1016/j.proeng.2011.11.100.
- Surekha, B.; Sree Lakshmi, T.; Jena, H.; Samal, P. Response Surface Modelling and Application of Fuzzy Grey Relational Analysis to Optimise the Multi Response Characteristics of EN-19 Machined Using Powder Mixed EDM. Aust. J. Mech. Eng. 2019. DOI: https://doi.org/10.1080/14484846.2018.1564527.
- Rahang, M.; Patowari, P. K. Parametric Optimization for Selective Surface Modification in EDM Using Taguchi Analysis. Mater. Manuf. Process. 2016, 31(4), 422–431. DOI: https://doi.org/10.1080/10426914.2015.1037921.
- Bhaumik, M.; Maity, K. Effect of Machining Parameter on the Surface Roughness of AISI 304 in Silicon Carbide Powder Mixed EDM. Decis. Sci. Lett. 2017, 6(3), 261–268. DOI: https://doi.org/10.5267/j.dsl.2016.12.004.
- Sidhu, S. S.; Batish, A.; Kumar, S. Study of Surface Properties in Particulate-Reinforced Metal Matrix Composites (Mmcs) Using Powder-Mixed Electrical Discharge Machining (EDM). Mater. Manuf. Process. 2014, 29(1), 46–52. DOI: https://doi.org/10.1080/10426914.2013.852211.
- Singh, A. K.; Kumar, S.; Singh, V. P. Optimization of Parameters Using Conductive Powder in Dielectric for EDM of Super Co 605 with Multiple Quality Characteristics. Mater. Manuf. Process. 2014, 29(3), 267–273. DOI: https://doi.org/10.1080/10426914.2013.864397.
- Assarzadeh, S.; Ghoreishi, M. A Dual Response Surface-Desirability Approach to Process Modeling and Optimization of Al2O3 Powder-Mixed Electrical Discharge Machining (PMEDM) Parameters. Int. J. Adv. Manuf. Technol. 2013, 64(9–12), 1459–1477. DOI: https://doi.org/10.1007/s00170-012-4115-2.
- Ahmad, S.; Lajis, M. A.; Abdul Haq, R. H.; Tajul Arifin, A. M.; Abdol Rahman, M. N.; Ho, F. H.; Abdullah, H.; Hassan, M. F. Surface Roughness and Surface Topography of Inconel 718 in Powder Mixed Dielectric Electrical Discharge Machining (PMEDM). Int J Integr Eng. 2018, 10(5), 181–186. DOI: https://doi.org/10.30880/ijie.2018.10.05.027.
- Jadam, T.; Sahu, S. K.; Datta, S.; Masanta, M. Powder-Mixed Electro-Discharge Machining Performance of Inconel 718: Effect of Concentration of Multi-Walled Carbon Nanotube Added to the Dielectric Media. Sadhana - Acad. Proc. Eng. Sci. 2020, 45(1), 1–16. DOI: https://doi.org/10.1007/s12046-020-01378-2.
- Singh, A. K.; Mahajan, R.; Tiwari, A.; Kumar, D.; Ghadai, R. K. Effect of Dielectric on Electrical Discharge Machining: A Review. IOP Conf. Ser. Mater. Sci. Eng. 2018, 377. DOI: https://doi.org/10.1088/1757-899X/377/1/012184.
- Sahu, D. R.; Mandal, A. Critical Analysis of Surface Integrity Parameters and Dimensional Accuracy in Powder-Mixed EDM. Mater. Manuf. Process. 2020, 35(4), 430–441. DOI: https://doi.org/10.1080/10426914.2020.1718695.
- Talla, G.; Gangopadhyay, S.; Biswas, C. K. Influence of Graphite Powder Mixed EDM on the Surface Integrity Characteristics of Inconel 625. Part. Sci. Technol. 2017, 35(2), 219–226. DOI: https://doi.org/10.1080/02726351.2016.1150371.
- Wang, J. L.; Yang, H.; Li, M. Study on Discharge Parameters of Surface Strengthening with Powder Mixed near Dry EDM for H13 Steel. Appl. Mech. Mater. 2014, 602–605, 757–760. DOI: https://doi.org/10.4028/scientific.net/AMM.602-605.757.
- Kuppan, P.; Rajadurai, A.; Narayanan, S. Influence of EDM Process Parameters in Deep Hole Drilling of Inconel 718. Int. J. Adv. Manuf. Technol. 2008, 38(1–2), 74–84. DOI: https://doi.org/10.1007/s00170-007-1084-y.
- Bhattacharya, A.; Batish, A.; Singh, G.; Singla, V. K. Optimal Parameter Settings for Rough and Finish Machining of Die Steels in Powder-Mixed EDM. Int. J. Adv. Manuf. Technol. 2012, 61(5–8), 537–548. DOI: https://doi.org/10.1007/s00170-011-3716-5.
- Long, B. T.; Phan, N. H.; Cuong, N.; Toan, N. D. Surface Quality Analysis of Die Steels in Powder-Mixed Electrical Discharge Machining Using Titan Powder in Fine Machining. Adv. Mech. Eng. 2016, 8(7), 168781401665773. DOI: https://doi.org/10.1177/1687814016657732.
- Batish, A.; Bhattacharya, A. Mechanism of Material Deposition from Powder, Electrode and Dielectric for Surface Modification of H11and H13 Die Steels in EDM Process. Mater. Sci. Forum. 2011, 701, 61–75. DOI: https://doi.org/10.4028/scientific.net/MSF.701.61.
- Abdul-Rani, A. M.; Aliyu, A. A. A.; Hastuty, S.; Ginta, T. L.; Rao, T. V. V. L. N.; Ali, S. Enhancing Surface Quality of Zr-Cu-Ni-Ti-Be through Hydroxyapatite Mixed EDM for Potential Orthopedic Application. AIP Conference Proceedings,Kuala Lumbur, Malaysia. 2018, 2035, 080010. https://doi.org/10.1063/1.5075609.
- Aliyu, A. A. A.; Abdul-Rani, A. M.; Ginta, T. L.; Prakash, C.; Axinte, E.; Fua-Nizan, R. Investigation of Nanoporosities Fabricated on Metallic Glass Surface by Hydroxyapatite Mixed EDM for Orthopedic Application. Malaysian J. Fundam. Appl. Sci. 2017, 13(4–2), 523–528. DOI: https://doi.org/10.11113/mjfas.v13n4-2.830.
- Zinelis, S.;. Surface and Elemental Alterations of Dental Alloys Induced by Electro Discharge Machining (EDM). Dent. Mater. 2007, 23(5), 601–607. DOI: https://doi.org/10.1016/j.dental.2006.03.021.
- Kiyak, M.; Aldemir, B. E.; Altan, E. Effects of Discharge Energy Density on Wear Rate and Surface Roughness in EDM. Int. J. Adv. Manuf. Technol. 2015, 79(1–4), 513–518. DOI: https://doi.org/10.1007/s00170-015-6840-9.
- Dawson-Elli, N.; Kolluri, S.; Mitra, K.; Subramanian, V. R. On the Creation of a Chess-AI-Inspired Problem-Specific Optimizer for the Pseudo Two-Dimensional Battery Model Using Neural Networks. J. Electrochem. Soc. 2019, 166(6), A886–A896. DOI: https://doi.org/10.1149/2.1261904jes.
- Dawson-Elli, N.; Lee, S. B.; Pathak, M.; Mitra, K.; Subramanian, V. R. Data Science Approaches for Electrochemical Engineers: An Introduction through Surrogate Model Development for Lithium-Ion Batteries. J. Electrochem. Soc. 2018, 165, 2.
- Al-Amin, M.; Abdul-Rani, A. M.; Danish, M.; Thompson, H. M.; Aliyu, A. A. A.; Hastuty, S.; Zohura, F. T.; Bryant, M. G.; Rubaiee, S.; Rao, T. V. V. L. N. Assessment of PM-EDM Cycle Factors Influence on Machining Responses and Surface Properties of Biomaterials: A Comprehensive Review. Precis. Eng. 2020, 66, 531–549. DOI: https://doi.org/10.1016/j.precisioneng.2020.09.002.
- Abu Qudeiri, J. E.; Mourad, A. H. I.; Ziout, A.; Abidi, M. H.; Elkaseer, A. Electric Discharge Machining of Titanium and Its Alloys: Review. Int. J. Adv. Manuf. Technol. 2018, 96(1–4), 1319–1339. DOI: https://doi.org/10.1007/s00170-018-1574-0.
- Rao, R. V.; Kalyankar, V. D. Optimization of Modern Machining Processes Using Advanced Optimization Techniques: A Review. Int. J. Adv. Manuf. Technol. 2014, 73(5–8), 1159–1188. DOI: https://doi.org/10.1007/s00170-014-5894-4.
- Aliyu, A. A.; Abdul-Rani, A. M.; Ginta, T. L.; Prakash, C.; Axinte, E.; Razak, M. A.; Ali, S. A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants. Adv. Mater. Sci. Eng. 2017, 2017, 23.