References
- Kulkarni, P.; Mali, K. D.; Singh, S. An Overview of the Formation of Fibre Waviness and Its Effect on the Mechanical Performance of Fibre Reinforced Polymer Composites. Compos. Part A Appl. Sci. Manuf. 2020, 137, 106013. DOI: https://doi.org/10.1016/j.compositesa.2020.106013.
- Hale, D. K.;. The Physical Properties of Composite Materials. J. Mater. Sci. 1976, 11(11), 2105–2141. DOI: https://doi.org/10.1007/PL00020339.
- Miao, J.; Fang, Y.; Yang, X.; Zhu, Y.; Hu, A.; Wang, G. Fabrication, Flame Retardancy and Physical Properties of Phosphorus Containing Porous Organic Polymers/epoxy Resin Composites. Polym. Degrad. Stab. 2020, 176, 109159. DOI: https://doi.org/10.1016/j.polymdegradstab.2020.109159.
- Jin, S.; Liu, Z.; Qian, L.; Qiu, Y.; Chen, Y.; Xu, B. Epoxy Thermoset with Enhanced Flame Retardancy and Physical-mechanical Properties Based on Reactive Phosphaphenanthrene Compound. Polym. Degrad. Stab. 2020, 172, 109063. DOI: https://doi.org/10.1016/j.polymdegradstab.2019.109063.
- Li, J.; Ai, Z.; Zhang, L. Design of a Neutral electro-Fenton System with Fe@Fe2O3/ACF Composite Cathode for Wastewater Treatment. J. Hazard. Mater. 2009, 164(1), 18–25. DOI: https://doi.org/10.1016/j.jhazmat.2008.07.109.
- Straumal, B. B.; Vershinin, N. F.; Cantarero-Saez, A.; Friesel, M.; Zieba, P.; Gust, W. Vacuum Arc Deposition of Protective Layers on Glass and Polymer Substrates. Thin Solid Films. 2001, 383(1–2), 224–226. DOI: https://doi.org/10.1016/S0040-6090(00)01799-5.
- Zhou, Q.; Chen, H.; Wang, Y. Region-selective Electroless Gold Plating on Polycarbonate Sheets by UV-patterning in Combination with Silver Activating. Electrochim. Acta. 2010, 55(7), 2542–2549. DOI: https://doi.org/10.1016/j.electacta.2009.12.024.
- Mekaru, H.; Koizumi, O.; Ueno, A.; Takahashi, M. Guide Structure with Pole Arrays Imprinted on Nylon Fiber. Microelectron. Eng. 2010, 87(5–8), 922–926. DOI: https://doi.org/10.1016/j.mee.2009.11.174.
- Robitaille, F.; Yandouzi, M.; Hind, S.; Jodoin, B. Metallic Coating of Aerospace Carbon/epoxy Composites by the Pulsed Gas Dynamic Spraying Process. Surf. Coatings Technol. 2009, 203(19), 2954–2960. DOI: https://doi.org/10.1016/j.surfcoat.2009.03.011.
- Zhou, X. L.; Chen, A. F.; Liu, J. C.; Wu, X. K.; Zhang, J. S. Preparation of Metallic Coatings on Polymer Matrix Composites by Cold Spray. Surf. Coatings Technol. 2011, 206(1), 132–136. DOI: https://doi.org/10.1016/j.surfcoat.2011.07.005.
- Lupoi, R.; O’Neill, W. Deposition of Metallic Coatings on Polymer Surfaces Using Cold Spray. Surf. Coatings Technol. 2010, 205(7), 2167–2173. DOI: https://doi.org/10.1016/j.surfcoat.2010.08.128.
- Rokni, M. R.; Feng, P.; Widener, C. A.; Nutt, S. R. Depositing Al-Based Metallic Coatings onto Polymer Substrates by Cold Spray. J. Therm. Spray. Technol. 2019, 28(7), 1699–1708. DOI: https://doi.org/10.1007/s11666-019-00911-y.
- Schmidt, T.; Assadi, H.; Gärtner, F.; Richter, H.; Stoltenhoff, T.; Kreye, H.; Klassen, T. From Particle Acceleration to Impact and Bonding in Cold Spraying. J. Therm. Spray. Technol. 2009, 18(5–6), 794–808. DOI: https://doi.org/10.1007/s11666-009-9357-7.
- Schmidt, T.; Gärtner, F.; Assadi, H.; Kreye, H. Development of a Generalized Parameter Window for Cold Spray Deposition. Acta Mater. 2006, 54(3), 729–742. DOI: https://doi.org/10.1016/j.actamat.2005.10.005.
- Che, H.; Vo, P.; Yue, S. Metallization of Carbon Fibre Reinforced Polymers by Cold Spray. Surf. Coatings Technol. 2017, 313, 236–247. DOI: https://doi.org/10.1016/j.surfcoat.2017.01.083.
- Che, H.; Vo, P.; Yue, S. Investigation of Cold Spray on Polymers by Single Particle Impact Experiments. J. Therm. Spray. Technol. 2018, 1–9. DOI: https://doi.org/10.1007/s11666-018-0801-4.
- Moridi, A.; Hassani-Gangaraj, S. M.; Guagliano, M.; Dao, M. Cold Spray Coating: Review of Material Systems and Future Perspectives. Surf. Eng. 2014, 30, 369–395. DOI: https://doi.org/10.1179/1743294414Y.0000000270.
- Dykhuizen, R. C.; Smith, M. F.; Gilmore, D. L.; Neiser, R. A.; Jiang, X.; Sampath, S. Impact of High Velocity Cold Spray Particles. J. Therm. Spray. Technol. 1999, 8(4), 559–564. DOI: https://doi.org/10.1361/105996399770350250.
- Raletz, F.; Vardelle, M.; Ezo’o, G. Critical Particle Velocity under Cold Spray Conditions. Surf. Coatings Technol. 2006, 201(5), 1942–1947. DOI: https://doi.org/10.1016/j.surfcoat.2006.04.061.
- Assadi, H.; Gärtner, F.; Stoltenhoff, T.; Kreye, H. Bonding Mechanism in Cold Gas Spraying. Acta Mater. 2003, 51(15), 4379–4394. DOI: https://doi.org/10.1016/S1359-6454(03)00274-X.
- Che, H.; Chu, X.; Vo, P.; Yue, S. Metallization of Various Polymers by Cold Spray. J. Therm. Spray. Technol. 2018, 27(1–2), 169–178. DOI: https://doi.org/10.1007/s11666-017-0663-1.
- Ganesan, A.; Affi, J.; Yamada, M.; Fukumoto, M. Bonding behavior studies of cold sprayed copper coating on the PVC polymer substrate. vol. 207. 2012.
- Pattison, J.; Celotto, S.; Khan, A.; O’Neill, W. Standoff Distance and Bow Shock Phenomena in the Cold Spray Process. Surf. Coatings Technol. 2008, 202(8), 1443–1454. DOI: https://doi.org/10.1016/j.surfcoat.2007.06.065.
- Jeandin, M.; Rolland, G.; Descurninges, L. L.; Berger, M. H. Which Powders for Cold Spray? Surf. Eng. 2014, 30(5), 291–298. DOI: https://doi.org/10.1179/1743294414Y.0000000253.
- Gillet, V.; Aubignat, E.; Costil, S.; Courant, B.; Langlade, C.; Casari, P.; Knapp, W.; Planche, M. P. Development of Low Pressure Cold Sprayed Copper Coatings on Carbon Fiber Reinforced Polymer (CFRP). Surf. Coatings Technol. 2019, 364, 306–316. DOI: https://doi.org/10.1016/j.surfcoat.2019.01.011.
- Perna, A. S.; Viscusi, A.; Astarita, A.; Boccarusso, L.; Caraviello, A.; Carrino, L.; Durante, M.; Sansone, R. Experimental Study of Functionalized Polymer Matrix Composite with Multi-Material Metal Coatings Produced by Means of Cold Spray Technology. Key Eng. Mater. 2019, 813, 267–272. DOI: 10.4028/http://www.scientific.net/KEM.813.267.
- Viscusi, A.; Antonucci, V.; Carrino, L.; Della Gatta, R.; Lopresto, V.; Papa, I.; Perna, A. S.; Ricciardi, M. R.; Astarita, A. Manufacturing of an Innovative Composite Structure: Design, Manufacturing and Impact Behaviour. Compos. Struct. 2020, 250, 112637. DOI: https://doi.org/10.1016/j.compstruct.2020.112637.
- Ganesan, A.; Yamada, M.; Fukumoto, M. Cold Spray Coating Deposition Mechanism on the Thermoplastic and Thermosetting Polymer Substrates. J. Therm. Spray. Technol. 2013, 22(8), 1275–1282. DOI: https://doi.org/10.1007/s11666-013-9984-x.
- Varinor, G. D.; Guipont, V.; Giraud, D.; Borit, F.; Guipont, V.; Jeandin, M.; Malhaire, J. M. Metallization of a polymer using cold spray: Application to aluminum coating of polyamide 66 Characterization and modeling of coating properties and microstructure evolution View project Metallization of a Polymer Using Cold Spray: Application to Aluminum. 2012.
- Bortolussi, V.; Borit, F.; Chesnaud, A.; Jeandin, M.; Faessel, M.; Figliuzzi, B.; Willot, F.; Roche, K.; Surdon, G. Cold spray of metal-polymer composite coatings onto carbon fiber-reinforced polymer (CFRP). 7. 2016.
- K., P.; M., M.; P., S. P. P. S.P. Technologies in Additive Manufacturing for Fiber Reinforced Composite Materials: A Review. Curr. Opin. Chem. Eng. 2020, 28, 51–59. DOI: https://doi.org/10.1016/j.coche.2020.01.001.
- Zindani, D.; Kumar, K. An Insight into Additive Manufacturing of Fiber Reinforced Polymer Composite. Int. J. Light. Mater. Manuf. 2019, 267–278. DOI: https://doi.org/10.1016/j.ijlmm.2019.08.004.
- Das, A.; Chatham, C. A.; Fallon, J. J.; Zawaski, C. E.; Gilmer, E. L.; Williams, C. B.; Bortner, M. J. Current Understanding and Challenges in High Temperature Additive Manufacturing of Engineering Thermoplastic Polymers. Addit. Manuf. 2020, 101218. DOI: https://doi.org/10.1016/j.addma.2020.101218.
- Brenken, B.; Barocio, E.; Favaloro, A.; Kunc, V.; Pipes, R. B. Fused Filament Fabrication of Fiber-reinforced Polymers: A Review. Addit. Manuf. 2018, 1–16. DOI: https://doi.org/10.1016/j.addma.2018.01.002.
- Blok, L. G.; Longana, M. L.; Yu, H.; Woods, B. K. S. An Investigation into 3D Printing of Fibre Reinforced Thermoplastic Composites. Addit. Manuf. 2018, 22(November2017), 176–186. DOI: https://doi.org/10.1016/j.addma.2018.04.039.
- Kabir, S. M. F.; Mathur, K.; Seyam, A.-F. M. A Critical Review on 3D Printed Continuous Fiber-reinforced Composites: History, Mechanism, Materials and Properties. Compos. Struct. 2020, 232, 111476. DOI: https://doi.org/10.1016/j.compstruct.2019.111476.
- Della Gatta, R.; Viscusi, A.; Perna, A. S.; Caraviello, A.; Astarita, A. Feasibility of Steel Powder Deposition on Composites through Cold Spray. Mater. Manuf. Process. 2020, 1–11. DOI: https://doi.org/10.1080/10426914.2020.1832693.
- Gonzalez, R.; Ashrafizadeh, H.; Lopera, A.; Mertiny, P.; McDonald, A. A. Review of Thermal Spray Metallization of Polymer-Based Structures. J. Therm. Spray Technol. 2016, 25, 897–919. DOI: https://doi.org/10.1007/s11666-016-0415-7.
- Della Gatta, R.; Viscusi, A.; Perna, A. S.; Caraviello, A.; Astarita, A. Cold Spray Process for the Production of AlSi10Mg Coatings on Glass Fibers Reinforced Polymers. Mater. Manuf. Process. 2020, 1–16. DOI: https://doi.org/10.1080/10426914.2020.1813895.
- Małachowska, A.; Winnicki, M.; Stachowicz, M.; Korzeniowski, M. Metallisation of Polycarbonates Using a Low Pressure Cold Spray Method. Surf. Eng. 2018, 34(3), 251–258. DOI: https://doi.org/10.1080/02670844.2016.1277843.
- Vucko, M. J.; King, P. C.; Poole, A. J.; Carl, C.; Jahedi, M. Z.; De Nys, R. Cold Spray Metal Embedment: An Innovative Antifouling Technology. Biofouling. 2012, 28(3), 239–248. DOI: https://doi.org/10.1080/08927014.2012.670849.
- Lupoi, R.; Stenson, C.; McDonnell, K. A.; Dowling, D. P.; Ahearne, E. Antifouling Coatings Made with Cold Spray onto Polymers: Process Characterization. CIRP Ann. 2016, 65(1), 545–548. DOI: https://doi.org/10.1016/j.cirp.2016.04.015.
- González-Estrada, O. A.; Pertuz, A.; Quiroga, J. Evaluation of Tensile Properties and Damage of Continuous Fibre Reinforced 3D-printed Parts. Key Engineering Materials. 2018; Trans Tech Publications Ltd: Switzerland. Vol. 774 KEM. 161–166.
- Bárnik, F.; Vaško, M.; Sága, M.; Handrik, M.; Sapietová, A.; Malujda, I.; Dudziak, M.; Krawiec, P.; Talaśka, K.; Wilczyński, D. Mechanical Properties of Structures Produced by 3D Printing from Composite Materials. MATEC Web Conf. 2019, 254, 01018. DOI: https://doi.org/10.1051/matecconf/201925401018.
- Viscusi, A.; Astarita, A.; Genna, S.; Leone, C. On the Influence of Different Superficial Laser Texturing on the Deposition of Powders through Cold Spray Process. Trans. Inst. Met. Finish. 2018, 96(1), 34–40. DOI: https://doi.org/10.1080/00202967.2018.1403096.
- Prisco, U.;. Size-dependent Distributions of Particle Velocity and Temperature at Impact in the Cold-gas Dynamic-spray Process. J. Mater. Process. Technol. 2015, 216, 302–314. DOI: https://doi.org/10.1016/j.jmatprotec.2014.09.013.
- Kalsi, S. S.; Sidhu, T. S.; Singh, H.; Karthikeyan, J. Behavior of Cold Spray Coating in Real Incineration Environment. Mater. Manuf. Process. 2016, 31(11), 1468–1475. DOI: https://doi.org/10.1080/10426914.2014.912319.
- Trexler, M. D.; Carter, R.; De Rosset, W. S.; Gray, D.; Helfritch, D. J.; Champagne, V. K. Cold Spray Fabrication of Refractory Materials for Gun Barrel Liner Applications. Mater. Manuf. Process. 2012, 27(8), 820–824. DOI: https://doi.org/10.1080/10426914.2011.648690.