References
- Jackiewicz, J., Manufacturing of Instructional Αids for Students at Low Cost by Means of 3D Printing. Mater. Manuf. Processes. 2017, 32(10), 1116–1130. DOI: https://doi.org/10.1080/10426914.2016.1257135.
- Horn, T. J.; Harrysson, O. L., Overview of Current Additive Manufacturing Technologies and Selected Applications. Sci. Prog. 2012, 95(3), 255–282. DOI:https://doi.org/10.3184/003685012X13420984463047.
- Najmon, J. C.; Raeisi, S.; Tovar, A. 2 - Review of Additive Manufacturing Technologies and Applications in the Aerospace Industry. In Additive Manufacturing for the Aerospace Industry; Froes, F., Boyer, R., Eds. Elsevier: 2019; pp 7–31. DOI: https://doi.org/10.1016/B978-0-12-814062-8.00002-9.
- Spoerk, M.; Gonzalez-Gutierrez, J.; Sapkota, J. Schuschnigg, S.; Holzer, C.; Effect of the Printing Bed Temperature on the Adhesion of Parts Produced by Fused Filament Fabrication. Plast., Rubber Compos. 2018, 47(1), 17–24. DOI:https://doi.org/10.1080/14658011.2017.1399531.
- Turner, B. N.; Gold, S. A. A. Review of Melt Extrusion Additive Manufacturing Processes: II. Materials, Dimensional Accuracy, and Surface Roughness. Rapid. Prototyp. J. 2015, 21(3), 250–261. DOI:https://doi.org/10.1108/RPJ-02-2013-0017.
- Chaidas, D.; Kitsakis, K.; Kechagias, J. Maropoulos, S. The Impact of Temperature Changing on Surface Roughness of FFF Process. IOP Conf. Ser. Mater. Sci. Eng. 2016, 161, 012033. DOI: https://doi.org/10.1088/1757-899X/161/1/012033.
- Vyavahare, S.; Kumar, S.; Panghal, D. Experimental Study of Surface Roughness, Dimensional Accuracy and Time of Fabrication of Parts Produced by Fused Deposition Modelling. Rapid. Prototyp. J. 2020, 26(9), 1535–1554. DOI:https://doi.org/10.1108/RPJ-12-2019-0315.
- Dey, A.; Yodo, N.; Systematic, A. Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics. J. Manuf. Mater. Process. 2019, 3(3), 64. DOI: https://doi.org/10.3390/jmmp3030064.
- Somireddy, M.; Singh, C.; Czekanski, A. Analysis of the Material Behavior of 3D Printed Laminates via FFF. Exp. Mech. 2019, 59(6), 871–881. DOI: https://doi.org/10.1007/s11340-019-00511-5.
- Matuana, L.; Faruk, O. Effect of Gas Saturation Conditions on the Expansion Ratio of Microcellular Poly (Lactic Acid)/Wood-Flour Composites. Express Polym. Lett. 2010, 4(10), 621–631. DOI: https://doi.org/10.3144/expresspolymlett.2010.77.
- Lv, S.; Gu, J.; Tan, H.; Zhang, Y. Modification of Wood Flour/PLA Composites by Reactive Extrusion with Maleic Anhydride. J. Appl. Polym. Sci. 2016, 133(15), 1–9. DOI: https://doi.org/10.1002/app.43295.
- Meng, Q.; Hetzer, M.; De Kee, D. PLA/Clay/Wood Nanocomposites: Nanoclay Effects on Mechanical and Thermal Properties. J. Compos. Mater. 2011, 45(10), 1145–1158. DOI: https://doi.org/10.1177/0021998310381541.
- Huda, M.; Drzal, L.; Misra, M.; Mohanty, A. Wood‐Fiber‐Reinforced Poly (Lactic Acid) Composites: Evaluation of the Physicomechanical and Morphological Properties. J. Appl. Polym. Sci. 2006, 102(5), 4856–4869. DOI: https://doi.org/10.1002/app.24829.
- Wimmer, R.; Steyrer, B.; Woess, J.; Koddenberg, T.; Mundigler, N. 3D Printing and Wood. Pro Ligno. 2015, 11(4), 144–149.
- Faludi, G.; Dora, G.; Renner, K.; Móczó, J.; Improving Interfacial, P. B. Adhesion in PLA/Wood Biocomposites. Compos. Sci. Technol. 2013, 89, 77–82. DOI: https://doi.org/10.1016/j.compscitech.2013.09.009.
- Kariz, M.; Sernek, M.; Kuzman, M. K. Effect of Humidity on 3D-Printed Specimens from Wood-PLA Filaments. Wood Res. 2018, 63(5), 917–922.
- Kain, S.; Ecker, J.; Haider, A.; Musso, M. Petutschnigg, A. Effects of the Infill Pattern on Mechanical Properties of Fused Layer Modeling (FLM) 3D Printed Wood/Polylactic Acid (PLA) Composites. Eur. J. Wood Wood Prod. 2020, 78(1), 65–74. DOI: https://doi.org/10.1007/s00107-019-01473-0.
- Ayrilmis, N.; Kariž, M.; Kitek Kuzman, M. Effect of Wood Flour Content on Surface Properties of 3D Printed Materials Produced from Wood Flour/PLA Filament. Int. J. Polym. Anal. Charact. 2019, 24(7), 659–666. DOI:https://doi.org/10.1080/1023666X.2019.1651547.
- Guessasma, S.; Belhabib, S.; Nouri, H. Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature. Polymers. 2019, 11(11), 1778. DOI: https://doi.org/10.3390/polym11111778.
- Zandi, M. D.; Jerez-Mesa, R.; Lluma-Fuentes, J.; Roa, J. J.; Travieso-Rodriguez, J. A. Experimental Analysis of Manufacturing Parameters’ Effect on the Flexural Properties of Wood-PLA Composite Parts Built through FFF. Int. J. Adv. Manuf. Technol. 2020, 106(9–10), 3985–3998. DOI: https://doi.org/10.1007/s00170-019-04907-4.
- De Backer, J.; Christiansson, A. K.; Oqueka, J.; Bolmsjö, G. Investigation of Path Compensation Methods for Robotic Friction Stir Welding. Ind. Robot. Int. J. 2012, 39(6), 601–608. DOI:https://doi.org/10.1108/01439911211268813.
- Phadke, M. S. Quality Engineering Using Robust Design; Englewood Cliffs, NJ: Prentice Hall, 1989.