References
- Verma, V.; Kumar, B. V. M. Processing of Alumina-Based Composites via Conventional Sintering and Their Characterization. Mater. Manuf. Process. 2017, 32(1), 21–26. DOI: https://doi.org/10.1080/10426914.2016.1198023.
- Singh, K.; Sharma, S. Development of Ni-Based and CeO2 -modified Coatings by Microwave Heating. Mater. Manuf. Process. 2018, 33(1), 50–57. DOI: https://doi.org/10.1080/10426914.2016.1257860.
- Wu, S.; Cheng, L. Porous SiC Ceramics with Controlled Pores by CVI and Oxidation Consumption Processing. Mater. Manuf. Process. 2016, 31(2), 182–185. DOI: https://doi.org/10.1080/10426914.2015.1037897.
- Ferreira, R.; Martins, J.; Carvalho, Ó.; Sobral, L.; Carvalho, S.; Silva, F. Tribological Solutions for Engine Piston Ring Surfaces: An Overview on the Materials and Manufacturing. Mater. Manuf. Process. 2020, 35(5), 498–520. DOI: https://doi.org/10.1080/10426914.2019.1692352.
- Liu, Y.; Jiang, X.; Shi, J.; Luo, Y.; Tang, Y.; Wu, Q.; Luo, Z. Research on the Interface Properties and Strengthening-Toughening Mechanism of Nanocarbon-Toughened Ceramic Matrix Composites. Nanotechnol. Rev. 2020, 9(1), 190–208. DOI: https://doi.org/10.1515/ntrev-2020-0017.
- Limpichaipanit, A.; Jiansirisomboon, S.; Tunkasiri, T. Sintering Temperature-Microstructure-Property Relationships of Alumina Matrix Composites with Silicon Carbide and Silica Additives. Sci. Eng. Compos. Mater. 2017, 24(4), 495–500. DOI: https://doi.org/10.1515/secm-2014-0353.
- Kim, S. W.; Chung, W. S.; Sohn, K. S.; Son, C. Y.; Lee, S. Improvement of Wear Resistance in Alumina Matrix Composites Reinforced with Carbon Nanotubes. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 2010, 41(2), 380–388. DOI: https://doi.org/10.1007/s11661-009-0136-3.
- Mohanvel, V.; Ravichandran, M. Influence of AlN Particles on Microstructure, Mechanical and Tribological Behaviour in AA6351 Aluminum Alloy. Mater. Res. Express. 2019, 6(10). DOI: https://doi.org/10.1088/2053-1591/ab39b0.
- Rajavel Muthaiah, V. M.; Meka, S. R.; Venkata Manoj Kumar, B. Processing of Heat-Treated Silicon Carbide-Reinforced Aluminum Alloy Composites. Mater. Manuf. Process. 2019, 34(3), 312–320. DOI: https://doi.org/10.1080/10426914.2018.1544708.
- Radha, A.; Suresh, S.; Ramanan, G.; Mohanvel, V.; Emmy Prema, C. Processing and Characterization of Mechanical and Wear Behavior of Al7075 Reinforced with B4C and Nano Graphene Hybrid Composite. Mater. Res. Express. 2019, 6(12). DOI: https://doi.org/10.1088/2053-1591/ab6263.
- Özler, L.; Tosun, G.; Özcan, M. E. Influence of B4C Powder Reinforcement on Coating Structure, Microhardness and Wear in Friction Surfacing. Mater. Manuf. Process. 2020, 35(10), 1135–1145. DOI: https://doi.org/10.1080/10426914.2020.1772480.
- Liu, Q.; Wang, Y.; Gao, Z.; Zhang, B.; Hou, Z.; Zhang, H.; Ye, F.; Wang, W. Fabrication of Electrically Conductive Barium Aluminum Silicate/silicon Nitride Composites with Enhanced Strength and Toughness. J. Mater. Sci. 2021, 56(2), 1221–1230. DOI: https://doi.org/10.1007/s10853-020-05409-5.
- Chandrasekar, P.; Natarajan, S.; Ramkumar, K. R. Influence of Carbide Reinforcements on Accumulative Roll Bonded Al 8011 Composites. Mater. Manuf. Process. 2019, 34(8), 889–897. DOI: https://doi.org/10.1080/10426914.2019.1594279.
- Chen, M.; Xiao, X.; Zhang, X.; Zhao, C. Effect of Mo on Morphology Evolution and Mechanical Properties of TiC-Based Cermets. JOM. 2020, 72(1), 385–392. DOI: https://doi.org/10.1007/s11837-019-03850-9.
- Walunj, G.; Bearden, A.; Patil, A.; Larimian, T.; Christudasjustus, J.; Gupta, R. K.; Mechanical, B. T. Tribological Behavior of Mechanically Alloyed Ni-TiC Composites Processed via Spark Plasma Sintering. Materials. 2020, 13(22), 5306. DOI: https://doi.org/10.3390/ma13225306.
- Hou, C.; Song, X.; Tang, X.; Li, Y.; Cao, L.; Wang, J.; Nie, Z. W–Cu Composites with Submicron- and Nanostructures: Progress and Challenges. NPG. Asia. Mater. 2019, 11(74), 1–20. DOI: https://doi.org/10.1038/s41427-019-0179-x.
- Sharma, B.; Shogo, Y.; Kawabata, M.; Vajpai, S. K.; Ameyama, K. Fabrication of Ti from a Blend of Ti and TiH2 Powders via Powder Metallurgy Processing. Mater. Manuf. Process. 2019, 3415, 1745–1752. https://doi.org/10.1080/10426914.2019.1669802.
- Wang, Z.; Wang, B.; Yin, Z.; Liu, K. Tribological Behavior of Spark Plasma Sintered Ultrafine-Grained WC-Cobalt Cemented Carbides in Dry Sliding. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2020, 234(13), 2707–2715. DOI: https://doi.org/10.1177/0954406220909849.
- Senthilnathan, N.; Raja Annamalai, A.; Venkatachalam, G. Activated Sintering of Tungsten Alloys through Conventional and Spark Plasma Sintering Process. Mater. Manuf. Process. 2017, 32(16), 1861–1868. DOI: https://doi.org/10.1080/10426914.2017.1328109.
- Liu, J.; Sun, K.; Zeng, L.; Wang, J.; Xiao, X.; Liu, J.; Guo, C.; Microstructure, D. Y. Properties of Copper-Graphite Composites Fabricated by Spark Plasma Sintering Based on Two-Step Mixing. Metals. 2020, 10(11), 1–13. DOI: https://doi.org/10.3390/met10111506.
- Prakash, C.; Singh, S.; Pabla, B. S.; Sidhu, S. S.; Uddin, M. S. Bio-Inspired Low Elastic Biodegradable Mg-Zn-Mn-Si-HA Alloy Fabricated by Spark Plasma Sintering. Mater. Manuf. Process. 2019, 34(4), 357–368. DOI: https://doi.org/10.1080/10426914.2018.1512117.
- Son, H. W.; Berthebaud, D.; Yubuta, K.; Yoshikawa, A.; Shishido, T.; Suzuta, K.; Mori, T. New Synthesis Route for Complex Borides; Rapid Synthesis of Thermoelectric Yttrium Aluminoboride via Liquid-Phase Assisted Reactive Spark Plasma Sintering. Sci. Rep. 2020, 10(1), 1–16. DOI: https://doi.org/10.1038/s41598-020-65818-z.
- Al-Aqeeli, N.; Mohammad, K.; Laoui, T.; Saheb, N. The Effect of Variable Binder Content and Sintering Temperature on the Mechanical Properties of WC-Co-VC/Cr3C2 Nanocomposites. Mater. Manuf. Process. 2015, 30(3), 327–334. DOI: https://doi.org/10.1080/10426914.2014.930894.
- Ghadami, S.; Taheri-Nassaj, E.; Baharvandi, H. R.; Ghadami, F. Effect of in Situ VSi2 and SiC Phases on the Sintering Behavior and the Mechanical Properties of HfB2-Based Composites. Sci. Rep. 2020, 10(1), 1–13. DOI: https://doi.org/10.1038/s41598-020-73295-7.
- Lee, D. J.; Park, J. H.; Kang, M. C. Optimization of TiC Content during Fabrication and Mechanical Properties of Ni-Ti-Al/TiC Composites Using Mixture Designs. Materials. 2018, 11(7), 1–10. DOI: https://doi.org/10.3390/ma11071133.
- Wagner, A.; Meshorer, Y.; Ratzker, B.; Sinefeld, D.; Kalabukhov, S.; Goldring, S.; Galun, E.; Frage, N. Pressure-Assisted Sintering and Characterization of Nd: YAGCeramic Lasers. Sci. Rep. 2021, 11(1), 1–12. DOI: https://doi.org/10.1038/s41598-021-81194-8.
- Seramak, T.; Zielinski, A.; Serbinski, W.; Zasinska, K. Powder Metallurgy of the Porous Ti-13Nb-13Zr Alloy of Different Powder Grain Size. Mater. Manuf. Process. 2019, 34(8), 915–920. DOI: https://doi.org/10.1080/10426914.2019.1605178.
- Luo, C.; Wang, Y.; Xu, J.; Xu, G.; Yan, Z.; Li, J.; Li, H.; Lu, H.; Suo, J. The Activated Sintering of W-Cu Composites through Spark Plasma Sintering. Int. J. Refract. Met. H. 2019, 81, 27–35. DOI: https://doi.org/10.1016/j.ijrmhm.2019.02.015.
- Razavi, M.; Ghaderi, R.; Rahimipour, M. R.; Shabni, M. O. Synthesis of TiC Master Alloy in Nanometer Scale by Mechanical Milling. Mater. Manuf. Process. 2012, 27(12), 1310–1314. DOI: https://doi.org/10.1080/10426914.2012.663142.
- Lee, G.; Olevsky, E. A.; Manière, C.; Maximenko, A.; Izhvanov, O.; Back, C.; McKittrick, J. Effect of Electric Current on Densification Behavior of Conductive Ceramic Powders Consolidated by Spark Plasma Sintering. Acta Mater. 2018, 144, 524–533. DOI: https://doi.org/10.1016/j.actamat.2017.11.010.
- Kennedy, S.; Kumaran, S.; Rao, T. S. Effect of Milling on Sintering Behaviour of γ-TiAl by Spark Plasma Sintering. Mater. Manuf. Process. 2013, 28(8), 928–932. DOI: https://doi.org/10.1080/10426914.2013.792423.
- Velmurugan, C.; Senthilkumar, V. Optimization of Spark Plasma Sintering Parameters for NiTiCu Shape Memory Alloys. Mater. Manuf. Process. 2019, 34(4), 369–378. DOI: https://doi.org/10.1080/10426914.2018.1512118.
- Lee, W. H.; Seong, J. G.; Yoon, Y. H.; Jeong, C. H.; Van Tyne, C. J.; Lee, H. G.; Chang, S. Y. Synthesis of TiC Reinforced Ti Matrix Composites by Spark Plasma Sintering and Electric Discharge Sintering: A Comparative Assessment of Microstructural and Mechanical Properties. Ceram. Int. 2019, 45(7), 8108–8114. DOI: https://doi.org/10.1016/j.ceramint.2019.01.062.
- Babapoor, A.; Asl, M. S.; Ahmadi, Z.; Namini, A. S. Effects of Spark Plasma Sintering Temperature on Densification, Hardness and Thermal Conductivity of Titanium Carbide. Ceram. Int. 2018, 44(12), 14541–14546. DOI: https://doi.org/10.1016/j.ceramint.2018.05.071.
- Binner, J.; Porter, M.; Baker, B.; Zou, J.; Venkatachalam, V.; Diaz, V. R.; D’Angio, A.; Ramanujam, P.; Zhang, T.; Murthy, T. Selection, Processing, Properties and Applications of Ultra-High Temperature Ceramic Matrix Composites, UHTCMCs–a Review. Int. Mater. Rev. 2020, 65(7), 389–444. DOI: https://doi.org/10.1080/09506608.2019.1652006.
- Stankovic, M.; Marinkovic, A.; Grbovic, A.; Miskovic, Z.; Rosic, B.; Mitrovic, R. Determination of Archard’s Wear Coefficient and Wear Simulation of Sliding Bearings. Ind. Lubr. Tribol. 2019, 71(1), 119–125. DOI: https://doi.org/10.1108/ILT-08-2018-0302.
- Sharma, S. B.; Agarwala, R. C.; Agarwala, V.; Ray, S. Dry Sliding Wear and Friction Behavior of Ni-P-ZrO2-Al2O3 Composite Electroless Coatings on Aluminum. Mater. Manuf. Process. 2002, 17(5), 637–649. DOI: https://doi.org/10.1081/AMP-120016088.