References
- Psyk, V.; Risch, D.; Kinsey, B. L.; Tekkaya, A. E.; Kleiner, M. Electromagnetic Forming A Review. J. Mater. Proc. Technol. 2011, 211, 787–829. DOI: https://doi.org/10.1016/j.jmatprotec.2010.12.012.
- Hayt, J. W. H.; Buck, J. A.; Akhtar, M. J. Engineering Electromagnetics (SIE); McGraw-Hill Education: Chennai, India, 2020.
- Sadiku, M. N. Elements of Electromagnetics; 4th Edition, 2007, Oxford University Press, New Delhi, India.
- Kore, S. D.; Date, P.; Kulkarni, S. Effect of Process Parameters on Electromagnetic Impact Welding of Aluminum Sheets. Int. J. Impact Eng. 2007, 34, 1327–1341. DOI: https://doi.org/10.1016/j.ijimpeng.2006.08.006.
- Mamalis, A.; Manolakos, D.; Kladas, A.; Koumoutsos, A. Electromagnetic Forming Tools and Processing Conditions: Numerical Simulation. Mater. Manuf. Processes. 2006, 21(4), 411–423. DOI: https://doi.org/10.1080/10426910500411785.
- Dond, S.; Choudhary, H.; Kolge, T.; Sharma, A. Analysis of the Variation of the Discharge Circuit Parameters during Electromagnetic Forming Processes. Int. J. Precis. Eng. Manuf. 2019, 20(3), 375–382. DOI: https://doi.org/10.1007/s12541-019-00029-9.
- Qiu, L.; Yu, Y.; Xiong, Q.; Deng, C.; Cao, Q.; Han, X.; Li, L. Analysis of Electromagnetic Force and Deformation Behavior in Electromagnetic Tube Expansion with Concave Coil Based on Finite Element Method. IEEE Trans. Appl. Supercond. 2018, 28, 1–5. DOI: https://doi.org/10.1109/TASC.2017.2789287.
- Cao, Q.; Li, Z.; Lai, Z.; Li, Z.; Han, X.; Li, L. Analysis of the Effect of an Electrically Conductive Die on Electromagnetic Sheet Metal Forming Process Using the Finite Element-circuit Coupled Method. Int. J. Adv. Manuf. Technol. 2019, 101(1–4), 549–563. DOI: https://doi.org/10.1007/s00170-018-2798-8.
- Lai, Z.; Cao, Q.; Chen, M.; Liu, N.; Li, X.; Huang, Y.; Han, X.; Li, L. The Effect of Coil Polarity on Electromagnetic Forming Using a Multi-coil System. Int. J. Adv. Manuf. Technol. 2019, 103(1–4), 1555–1566. DOI: https://doi.org/10.1007/s00170-019-03656-8.
- Lai, Z.; Cao, Q.; Han, X.; Chen, M.; Liu, N.; Li, X.; Cao, Q.; Huang, Y.; Chen, Q.; Li, L. Insight into Analytical Modeling of Electromagnetic Forming. Int. J. Adv. Manuf. Technol. 2019, 101(9–12), 2585–2607. DOI: https://doi.org/10.1007/s00170-018-3090-7.
- Chen, M.; Lai, Z.; Cao, Q.; Han, X.; Wang, C.; Liu, N.; Li, L. Improvement on Formability and Forming Accuracy in Electromagnetic Forming of Deep-cavity Sheet Metal Part Using a Dual-coil System. J. Manuf. Processes. 2020, 57, 209–221. DOI: https://doi.org/10.1016/j.jmapro.2020.06.023.
- Khan, M. R.; Hossain, M. M.; Sharma, A.; Kumar, S. Sequential Coupling of Electromagnetic–structural Simulation for Compression Welding of Tubular Jobs. Proc. Inst. Mech. Eng. Part. C. J. Mech. Eng. Sci. 2019, 233, 3346–3355. DOI: https://doi.org/10.1177/0954406218813445.
- Maloberti, O.; Mansouri, O.; Jouaffre, D.; Hamzaoui, M.; Derosiere, J.; Buiron, N.; Sansen, P.; Sapanathan, T.; Pelca, P.; Rachik, M. Analytical Design Model of Coil Parameters for the Electro-magnetic Forming Technology–case of the 1-turn Coil Dedicated to Tubular Parts Forming and Crimping with 1D Approximation. J. Mater. Proc. Technol. 2019, 266, 450–473. DOI: https://doi.org/10.1016/j.jmatprotec.2018.07.016.
- Qiu, L.; Yu, Y.; Wang, Z.; Yang, Y.; Yang, Y.; Su, P. Analysis of Electromagnetic Force and Deformation Behavior in Electromagnetic Forming with Different Coil Systems. Int. J. Appl. Electromagn. Mech. 2018, 57, 337–345. DOI: https://doi.org/10.1109/TASC.2017.2789287.
- Haratmeh, H. E.; Arezoodar, A. F.; Farzin, M. Numerical and Experimental Investigation of Inward Tube Electromagnetic Forming. Int. J. Adv. Manuf. Technol. 2017, 88, 1175–1185. DOI: https://doi.org/10.1007/s00170-016-8826-7.
- Kumar, R.; Sahoo, S.; Sarkar, B.; Shyam, A., Development of Electromagnetic Welding Facility of Flat Plates for Nuclear Industry, J. Phys. Conf.: Ser. (JPCS). 2017, 12–19.
- Li, C.; Zhou, Y.; Shi, X.; Liao, Z.; Du, J.; Shen, T.; Yao, C. Magnetic Field Edge-effect Affecting Joint Macro-morphology in Sheet Electromagnetic Pulse Welding. Mater. Manuf. Processes. 2020, 1–11. DOI: https://doi.org/10.1080/10426914.2020.1758332.
- Mamutov, A. V.; Golovashchenko, S. F.; Mamutov, V. S. Experimental-analytical Method of Analyzing Performance of Coils for Electromagnetic Forming and Joining Operations. J. Mater. Proc. Technol. 2018, 255, 86–95. DOI: https://doi.org/10.1016/j.jmatprotec.2017.11.050.
- Kumar, R.; Kore, S. D. Finite Element Modelling and Analysis of the Effect of Frequency on the Electromagnetic Compression of Tubes. In Journal of Physics: Conference Series, IOP Publishing. 2016, 759, 012055. DOI: https://doi.org/10.1088/1742-6596/759/1/012055.
- Sedighi, M.; Karimi Nemch, H.; Khandaei, M. Effect of Sheet Thickness on Magnitude and Distribution of Magnetic Force in Electromagnetic Sheet Metal Forming Process. In: Applied Mechanics and Materials. Trans. Tech. Publ. 2012, 3506–3511. https://www.scientific.net/AMM.110-116.3506.
- Golowin, S.; Kamal, M.; Shang, J.; Portier, J.; Din, A.; Daehn, G. S.; Bradley, J., . R.; Newman, K. E.; Hatkevich, S. Application of a Uniform Pressure Actuator for Electromagnetic Processing of Sheet Metal. J. Mater. Eng. Perform. 2007, 16(4), 455–460. DOI: https://doi.org/10.1007/s11665-007-9085-4.
- Noh, H. G.; An, W. J.; Song, W. J.; Kang, B. S.; Kim, J. Experimental and Numerical Study on Patterned Emboss Forming Using Electromagnetic Forces. Int. J. Precis. Eng. Manuf. 2015, 16(7), 1447–1454. DOI: https://doi.org/10.1007/s12541-015-0191-1.
- Xu, D.; Liu, X.; Fang, K.; Fang, H. Calculation of Electromagnetic Force in Electromagnetic Forming Process of Metal Sheet. J. Appl. Phys. 2010, 107(12), 124907. DOI: https://doi.org/10.1063/1.3437201.
- Bartels, G.; Schätzing, W.; Scheibe, H.-P.; Leone, M. Comparison of Two Different Simulation Algorithms for the Electromagnetic Tube Compression. Int. J. Mater. Form. 2009, 2(1), 693. DOI: https://doi.org/10.1007/s12289-009-0620-8.
- Luo, W.; Huang, L.; Li, J.; Liu, X.; Wang, Z. A Novel Multi-layer Coil for A Large and Thick-walled Component by Electromagnetic Forming. J. Mater. Proc. Technol. 2014, 214(11), 2811–2819. DOI: https://doi.org/10.1016/j.jmatprotec.2014.05.023.
- Ouyang, S.; Li, X.; Li, C.; Du, L.; Peng, T.; Han, X.; Li, L.; Lai, Z.; Cao, Q. Investigation of the Electromagnetic Attractive Forming Utilizing a Dual-coil System for Tube Bulging. J. Manuf. Processes. 2020, 49, 102–115. DOI: https://doi.org/10.1016/j.jmapro.2019.11.006.
- Shrivastava, A.; Telang, A.; Jha, A.; Ahmed, M. Experimental and Numerical Study on the Influence of Process Parameters in Electromagnetic Compression of AA6061 Tube. Mater. Manuf. Processes. 2019, 1–12. DOI: https://doi.org/10.1080/10426914.2019.1655156.
- Zhang, H.; Yang, Z.; Ren, L. Experimental Investigation on Structure Parameters of E-shaped Coil in Magnetic Pulse Welding. Mater. Manuf. Processes. 2019, 34(15), 1701–1709. DOI: https://doi.org/10.1080/10426914.2019.1689263.
- Golovashchenko, S. F.;. Material Formability and Coil Design in Electromagnetic Forming. J. Mater. Eng. Perform. 2007, 16(3), 314–320. DOI: https://doi.org/10.1007/s11665-007-9058-7.
- Kim, D. H.; Park, Y. J. Calculation of the Inductance and AC Resistance of Planar Rectangular Coils. Electron. Lett. 2016, 52(15), 1321–1323. DOI: https://doi.org/10.1049/el.2016.0696.
- Cao, Q.; Han, X.; Lai, Z.; Zhang, B.; Zhou, Z.; Qiu, L.; Li, L. Effects of Current Frequency on Electromagnetic Sheet Metal Forming Process. IEEE Trans. Appl. Supercond. 2013, 24, 1–4. DOI: https://doi.org/10.1109/TASC.2013.2279886.
- Zaitov, O.; Kolchuzhin, V. A. Bitter Coil Design Methodology for Electromagnetic Pulse Metal Processing Techniques. J. Manuf. Processes. 2014, 16(4), 551–562. DOI: https://doi.org/10.1016/j.jmapro.2014.07.008.
- Paese, E.; Geier, M.; Homrich, R.; Rossi, R. A Coupled Electric–magnetic Numerical Procedure for Determining the Electromagnetic Force from the Interaction of Thin Metal Sheets and Spiral Coils in the Electromagnetic Forming Process. Appl. Math. Modell. 2015, 39(1), 309–321. DOI: https://doi.org/10.1016/j.apm.2014.05.032.
- Otin, R. A Numerical Model for the Search of the Optimum Frequency in Electromagnetic Metal Forming. Int. J. Solids Struct. 2013, 50(10), 1605–1612. DOI: https://doi.org/10.1016/j.ijsolstr.2013.01.023.
- Rajak, A. K.; Kore, S. D. Application of Electromagnetic Forming in Terminal Crimping Using Different Types of Field Shapers. J. Mech. Sci. Technol. 2018, 32(9), 4291–4297. DOI: https://doi.org/10.1007/s12206-018-0827-z.
- Johnson, G. R.; Cook, W. H. Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures. Eng. Fract. Mech. 1985, 21(1), 31–48. DOI: https://doi.org/10.1016/0013-7944(85)90052-9.
- Piao, M.; Huh, H.; Lee, I.; Park, L. Characterization of Hardening Behaviors of 4130 Steel, OFHC Copper, Ti6Al4V Alloy considering Ultra-high Strain Rates and High Temperatures. Int. J. Mech. Sci. 2017, 131, 1117–1129. DOI: https://doi.org/10.1016/j.ijmecsci.2017.08.013.
- Guo, Y. B.; Wen, Q.; Horstemeyer, M. F. An Internal State Variable Plasticity-based Approach to Determine Dynamic Loading History Effects on Material Property in Manufacturing Processes. Int. J. Mech. Sci. 2005, 47(9), 1423–1441. DOI: https://doi.org/10.1016/j.ijmecsci.2005.04.015.
- Bammann, D. J. Modeling Temperature and Strain Rate Dependent Large Deformation of Metals. Appl. Mech. Rev. 1990, 43((5),), 312–319. DOI: https://doi.org/10.1115/1.3120834.
- Bammann, D. J.; Chiesa, M. L.; Johnson, G. C. Modeling Large Deformation and Failure in Manufacturing Process. Theory. Appl. Mech. 1996, 9, 359–376.
- Shang, J.; Hatkevich, S.; Wilkerson, L. Comparison between Experimental and Numerical Results of Electromagnetic Tube Expansion. In 12th International Ls-Dyna Users Conference, Detroit, Dearborn, Michigan, USA, 2012, 1–10.
- Ls-DYNA Keyword User Manual, Volume I, May 2007, Version 971; Livermore Software Technology Corporation (LSTC), California, USA, 2007.
- Bird, J. Electrical Circuit Theory and Technology; Routledge: Oxon, UK, 2014.
- Lal, G.; Hillier, M. The Electrodynamics of Electromagnetic Forming. Int. J. Mech. Sci. 1968, 10(6), 491–500. DOI: https://doi.org/10.1016/0020-7403(68)90030-1.
- Operational and Maintenance manual. 40 KJ EMM Machine; Electronics corporation of India limited (ECIL) Hyderabad: India, 2017-2018.