References
- Gibson, I.; Rosen, D.; Stucker, B. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, Second Edition. Addit. Manuf. Technol. 3D Printing, Rapid Prototyping, Direct Digit. Manuf. Second Ed. 2015.
- Parmar, H.; Khan, T.; Tucci, F.; Umer, R.; Carlone, P. Advanced Robotics and Additive Manufacturing of Composites: Towards a New Era in Industry 4.0. Mater. Manuf. Process. 2021, 1–35.
- Shi, Y.; Zhang, Y.; Baek, S.; De Backer, W.; Harik, R. . Manufacturability Analysis for Additive Manufacturing Using a Novel Feature Recognition Technique. Comput. Aided Des. Appl. [Internet]. 2018, 15(6), 941–952. DOI:https://doi.org/10.1080/16864360.2018.1462574.
- Attaran, M. The Rise of 3-D Printing: The Advantages of Additive Manufacturing over Traditional Manufacturing. Bus Horiz. 2017, 60(5), 677–688. DOI: https://doi.org/10.1016/j.bushor.2017.05.011.
- Bogue, R. 3D Printing: The Dawn of a New Era in Manufacturing? Assem. Autom. 2013, 33(4), 307–311. DOI: https://doi.org/10.1108/AA-06-2013-055.
- Cunico, M. W. M.; Kai, D. A.; Cavalheiro, P. M.; de Carvalho, J. Development and Characterisation of 3D Printing Finishing Process Applying Recycled Plastic Waste. Virtual Phys. Prototyp. . 2019, 14(1), 37–52.
- Deisenroth, D. C.; Moradi, R.; Shooshtari, A. H.; Singer, F.; Bar-Cohen, A.; Ohadi, M. Review of Heat Exchangers Enabled by Polymer and Polymer Composite Additive Manufacturing. Heat Transf. Eng. [Internet]. 2018, 39(19), 1648–1664. https://www.tandfonline.com/doi/full/10.1080/01457632.2017.1384280
- Ning, F.; Cong, W.; Hu, Y.; Wang, H. Additive Manufacturing of Carbon Fiber-reinforced Plastic Composites Using Fused Deposition Modeling: Effects of Process Parameters on Tensile Properties. J. Compos. Mater. [Internet]. 2017, 51(6), 451–462. http://journals.sagepub.com/doi/10.1177/0021998316646169
- Rajak, D. K.; Pagar, D. D.; Menezes, P. L.; Linul, E. Fiber-reinforced Polymer Composites: Manufacturing, Properties, and Applications. Polymers (Basel). 2019, 11(10), 1667.
- Carlone, P.; Rubino, F.; Paradiso, V.; Tucci, F. Multi-scale Modeling and Online Monitoring of Resin Flow through Dual-scale Textiles in Liquid Composite Molding Processes. Int. J. Adv. Manuf. Technol. 2018, 96(5–8), 2215–2230.
- Rubino, F.; Esperto, V.; Tucci, F.; Carlone, P. Flow Enhancement in Liquid Composite Molding Processes by Online Microwave Resin Preheating. Polym. Eng. Sci. 2020, 60(10), 2377–2389.
- Niendorf, K.; Raeymaekers, B. Additive Manufacturing of Polymer Matrix Composite Materials with Aligned or Organized Filler Material: A Review. Adv. Eng. Mater. 2021, 23(4), 2001002. DOI: https://doi.org/10.1002/adem.202001002.
- Sun, S.; Han, Z.; Dhupia, J. S.; Jin, H. Multi-scale Analysis of Interface Characteristics for CFRPs Made by Automated Fiber Placement. Mech. Adv. Mater. Struct. [Internet]. 2020, 1–30. https://www.tandfonline.com/doi/full/10.1080/15376494.2020.1852456
- Goh, G. D.; Dikshit, V.; An, J.; Yeong, W. Y. Process-structure-property of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic: An Investigation of Mode I Interlaminar Fracture Toughness. Mech. Adv. Mater. Struct. [Internet]. 2020, 1–13. https://www.tandfonline.com/doi/full/10.1080/15376494.2020.1821266
- Ferrell, W. H.; Arndt, C. M.; TerMaath, S. Tensile Strength Dependence of FFF Fiber Reinforced ABS on Environmental Conditioning. Mech. Adv. Mater. Struct. [Internet]. 2020, 1–14. https://www.tandfonline.com/doi/full/10.1080/15376494.2020.1722870
- Lyu, J.; Manoochehri, S. Online Convolutional Neural Network-based Anomaly Detection and Quality Control for Fused Filament Fabrication Process. Virtual Phys. Prototyp. [Internet]. 2021, 16(2), 160–177. https://www.tandfonline.com/doi/full/10.1080/17452759.2021.1905858
- Liu, Z.; Wang, Y.; Wu, B.; Cui, C.; Guo, Y.; Yan, C. A Critical Review of Fused Deposition Modeling 3D Printing Technology in Manufacturing Polylactic Acid Parts. Int. J. Adv. Manuf. Technol. 2019, 102, 2877–2889.
- Nassar, A.; Nassar, E.; Younis, M. A Novel Design to External Filament Extruder for 3D Printer. Aust. J. Mech. Eng. [Internet]. 2019, 1–8. https://www.tandfonline.com/doi/full/10.1080/14484846.2019.1605684
- Raspall, F.; Velu, R.; Vaheed, N. M. Fabrication of Complex 3D Composites by Fusing Automated Fiber Placement (AFP) and Additive Manufacturing (AM) Technologies. Adv. Manuf. Polym. Compos. Sci. 2019, 5(1), 6-16, DOI: https://doi.org/10.1080/20550340.2018.1557397.
- Kabir, S. M. F.; Mathur, K.; Seyam, A. F. M. A Critical Review on 3D Printed Continuous Fiber-reinforced Composites: History, Mechanism, Materials and Properties. Compos. Struct. 2020, 232, 111476. DOI: https://doi.org/10.1016/j.compstruct.2019.111476.
- Hart, R. J.; Patton, E. G.; Sapunkov, O. Characterization of Continuous Fiber-Reinforced Composite Materials Manufactured Via Fused Filament Fabrication02. 2018, 14.
- Dickson, A. N.; Barry, J. N.; McDonnell, K. A.; Dowling, D. P. Fabrication of Continuous Carbon, Glass and Kevlar Fibre Reinforced Polymer Composites Using Additive Manufacturing. Addit. Manuf. 2017, 16, 146-152. https://doi.org/https://doi.org/10.1016/j.addma.2017.06.004.
- Sugiyama, K.; Matsuzaki, R.; Malakhov, A. V.; Polilov, A. N.; Ueda, M.; Todoroki, A.; Hirano, Y. 3D Printing of Optimized Composites with Variable Fiber Volume Fraction and Stiffness Using Continuous Fiber. Compos. Sci. Technol. 2020, 186, 107905. DOI: https://doi.org/10.1016/j.compscitech.2019.107905.
- Brown, N. W. A.; Worrall, C. M.; Ogin, S. L.; Smith, P. A. Investigation into the Mechanical Properties of Thermoplastic Composites Containing Holes Machined by a Thermally-assisted Piercing (TAP) Process. Adv. Manuf. Polym. Compos. Sci. 2015, 1(4), 199-209, DOI: https://doi.org/10.1080/20550340.2015.1117748.
- Rao, Y. S.; Mohan, N. S.; Shetty, N.; Shivamurthy, B. Drilling and Structural Property Study of Multi-layered Fiber and Fabric Reinforced Polymer Composite - a Review. Mater. Manuf. Process. [Internet]. 2019, 34(14), 1549–1579. https://www.tandfonline.com/doi/full/10.1080/10426914.2019.1686522
- Chapiro, M. Current Achievements and Future Outlook for Composites in 3D Printing. Reinf. Plast. 2016, 60(6), 372–375. DOI: https://doi.org/10.1016/j.repl.2016.10.002.
- Campbell, F. Structural Composite Materials. ASM Int. 2010, 4-52.
- ASTM D5961/D5961M-13. Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates. Am. Soc. Test. Mater. 2013, 15(03), 1–33.
- Persson, E.; Eriksson, I.; Hammersberg, P. Propagation of Hole Machining Defects in Pin-loaded Composite Laminates. J. Compos. Mater. 1997, 31(4), 383–408. DOI: https://doi.org/10.1177/002199839703100404.
- Papa, I.; Ricciardi, M. R.; Antonucci, V.; Langella, A.; Tirillò, J.; Sarasini, F.; Pagliarulo, V.; Ferraro, P.; Lopresto, V. Comparison between Different Non-destructive Techniques Methods to Detect and Characterize Impact Damage on Composite Laminates. J. Compos. Mater. 2020, 54(5), 617–631.
- Busse, G. Optoacoustic Phase Angle Measurement for Probing a Metal. Appl. Phys. Lett. 1979, 35(10), 759–760. DOI: https://doi.org/10.1063/1.90960.
- Cameron, C. J.; Larsson, J.; Loukil, M. S.; Murtagh, T.; Wennhage, P. Bearing Strength Performance of Mixed Thin/thick-ply, Quasi-isotropic Composite Laminates. Compos. Struct. 2021, 261, 113312. DOI: https://doi.org/10.1016/j.compstruct.2020.113312.
- Dickson, A. N.; Dowling, D. P. Enhancing the Bearing Strength of Woven Carbon Fibre Thermoplastic Composites through Additive Manufacturing. Compos. Struct. 2019, 212, 381–388. DOI: https://doi.org/10.1016/j.compstruct.2019.01.050.
- Turan, K.; Gur, M.; Kaman, M. O. Progressive Failure Analysis of Pin-loaded Unidirectional Carbon-epoxy Laminated Composites. Mech. Adv. Mater. Struct. 2014, 21(2), 98–106. DOI: https://doi.org/10.1080/15376494.2012.677109.
- Pekbey, Y. Failure Strength of E-glass/epoxy Composite Pinned Joints: Effect of Geometry, Clamping Torque and Laminate Orientation. Adv. Compos. Lett. 2007, 16(3), 096369350701600. DOI: https://doi.org/10.1177/096369350701600302.
- Ferrell, W. H.; Clement, J.; TerMaath, S. Uniaxial Tensile Testing Standardization for the Qualification of Fiber Reinforced Plastics for Fused Filament Fabrication. Mech. Adv. Mater. Struct. [Internet]. 2021, 28(12), 1254–1273. https://www.tandfonline.com/doi/full/10.1080/15376494.2019.1660438
- Meinhard, D.; Haeger, A.; Knoblauch, V. Drilling Induced Defects on Carbon Fiber-reinforced Thermoplastic Polyamide and Their Effect on Mechanical Properties. Compos. Struct. 2021, 256, 113138. DOI: https://doi.org/10.1016/j.compstruct.2020.113138.