Magnetorheological finishing process for improved performance of polymer gears

References

• Petare, A.; Deshwal, G.; Palani, I. A.; Jain, N. K. Laser texturing of helical and straight bevel gears to enhance finishing performance of AFF process. Int. J. Adv. Manuf. Tech. 2020, 110(7), 2221–2238. DOI: 10.1007/s00170-020-06007-0.
   Web of Science ®Google Scholar
• Snyder, L. At the “PEEK” of the polymer food chain. Gear Tech 2010, 26–28.
   Google Scholar
• Fernandes, C. M.; Rocha, D. M.; Martins, R. C.; Magalhães, L.; Seabra, J. H. Hybrid Polymer Gear Concepts to Improve Thermal Behavior. J. Trib. 2019, 141(3), 032201. DOI: 10.1115/1.4041461.
   Web of Science ®Google Scholar
• Mao, K.; Greenwood, D.; Ramakrishnan, R.; Goodship, V.; Shrouti, C.; Chetwynd, D.; Langlois, P. The wear resistance improvement of fibre reinforced polymer composite gears. Wear. 2019, 426, 1033–1039.
   Web of Science ®Google Scholar
• Le Bot, A. Noise of sliding rough contact. J. Phy.: Conf. Ser. 2017, 797(1), 012006.
   Google Scholar
• Davis, J. R. Gear materials, properties and manufacture. ASM Int. Ohio. 2005;1-18.
   Google Scholar
• Gupta, K.; Jain, N. K.; Laubscher, R. Advanced gear manufacturing and finishing classical and modern processes; Academic Press: London, 2017.
   Google Scholar
• Sekar, R. P.; Sathishkumar, R. Enhancement of wear resistance on normal contact Ratio Spur gear pairs through non-standard gears. Wear. 2017, 380–381, 228–239.
   Web of Science ®Google Scholar
• Kalin, M. Influence of flash temperatures on the tribological behaviour in low-speed sliding: a review. Mater. Sci. Eng. A. 2004, 374(1–2), 390–397. DOI: 10.1016/j.msea.2004.03.031.
   Web of Science ®Google Scholar
• Hoskins, T. J.; Dearn, K. D.; Kukureka, S. N.; Walton, D. Acoustic noise from polymer gears–A tribological investigation. Mater. Des. 2011, 32(6), 3509–3515. DOI: 10.1016/j.matdes.2011.02.041.
   Web of Science ®Google Scholar
• Petare, A. C.; Jain, N. K. Improving spur gear microgeometry and surface finish by AFF process. Mater. Manuf. Process. 2018, 33(9), 923–934. DOI: 10.1080/10426914.2017.1376074.
   Web of Science ®Google Scholar
• Yadav, R. D.; Singh, A. K.; Arora, K. Modeling of surface roughness in a novel magnetorheological gear profile finishing process. Proc. Ins. Mech. Eng., Part C: J. Mech. Eng. Sci 2020, 0954406220978265. DOI: 10.1177/0954406220978265.
   Web of Science ®Google Scholar
• Sokolov, I. I.; Cherkashin, V. New machining method of the hardened bevel gears flanks. Vest. Masi. 1998, 8, 50–52.
   Google Scholar
• Misra, J. P.; Jain, N. K.; Jain, P. K. Investigations on precision finishing of helical gears by electrochemical honing process. Proc. Ins. Mech. Eng., Part B: J. Eng. Manuf. 2010, 224(12), 1817–1830.
   Web of Science ®Google Scholar
• Shaikh, J. H.; Jain, N. K.; Venkatesh, V. C. Precision Finishing of bevel gears by electrochemical honing. Mater. Manufac. Process. 2013, 28(10), 1117–1112. DOI: 10.1080/10426914.2013.811737.
   Web of Science ®Google Scholar
• Venkatesh, G.; Sharma, A. K.; Singh, N.; Kumar, P. Finishing of bevel gears using abrasive flow machining. Proc. Eng. 2014, 97, 320–328. DOI: 10.1016/j.proeng.2014.12.255.
   Google Scholar
• Maloney, C.; Lormeau, J. P.; Dumas, P. Improving low, mid and high-spatial frequency errors on advanced aspherical and freeform optics with MRF. Proc. SPIE. Int. Soc. Opt. Eng. 2016, 10009, 100090R. DOI: 10.1117/12.2236034.
   Google Scholar
• Singh, M.; Singh, A. K. Improved magnetorheological finishing process with rectangular core tip for external cylindrical surfaces. Mater. Manuf. Process. 2019, 34(9), 1049–1061. DOI: 10.1080/10426914.2019.1594272.
   Web of Science ®Google Scholar
• Singh, M.; Singh, A.; Singh, A. K. A rotating core-based magnetorheological nano-finishing process for external cylindrical surfaces. Mater. Manuf. Process. 2018, 33(11), 1160–1168. DOI: 10.1080/10426914.2017.1328116.
   Web of Science ®Google Scholar
• Singh, M.; Singh, A. K. Magnetorheological Finishing of Micro-punches for Enhanced Performance of Micro-extrusion Process. Mater. Manuf. Process. 2019, 34(14), 1646–1657. DOI: 10.1080/10426914.2019.1689262.
   Web of Science ®Google Scholar
• Bedi, T. S.; Singh, A. K. Magnetorheological methods for nanofinishing–a review. Part. Sci. Tech. 2016, 34(4), 412–422. DOI: 10.1080/02726351.2015.1081657.
   Web of Science ®Google Scholar
• Yadav, R. D.; Singh, A. K. A novel magnetorheological gear profile finishing with high shape accuracy. Int. J. Mach. Tool. Manuf. 2019, 139, 75–92. DOI: 10.1016/j.ijmachtools.2019.02.001.
   Web of Science ®Google Scholar
• Yadav, R. D.; Singh, A. K.; Arora, K. Parametric analysis of magnetorheological finishing process for improved performance of gear profile. J. Manuf. Process. 2020, 57, 254–267. DOI: 10.1016/j.jmapro.2020.06.024.
   Web of Science ®Google Scholar
• Arora, K.; Singh, A. K. Theoretical and experimental investigation on surface roughness of straight bevel gears using a novel magnetorheological finishing process. Wear. 2021, 476, 203693. DOI: 10.1016/j.wear.2021.203693.
   Web of Science ®Google Scholar
• Aggarwal, A.; Singh, A. K. Development of grinding wheel type magnetorheological finishing process for blind-hole surfaces. Mater. Manuf. Process. 2020, 1–22. DOI: 10.1080/10426914.2020.1843666.
   Web of Science ®Google Scholar
• Asadollahzadeh, M.; Tavakoli, H.; Torab-Mostaedi, M.; Hosseini, G.; Hemmati, A. Response surface methodology based on central composite design as a chemometric tool for optimization of dispersive-solidification liquid–liquid microextraction for speciation of inorganic arsenic in environmental water samples. Talan. 2014, 123, 25–31. DOI: 10.1016/j.talanta.2013.11.071.
   PubMed Web of Science ®Google Scholar
• Kordonski, W.; Golini, D. Magnetorheological suspension-based high precision finishing technology (MRF). J. Int. Mater. Sys. Struct. 1998, 9(8), 650–654. DOI: 10.1177/1045389X9800900811.
   Web of Science ®Google Scholar
• Stolarski, T. A. A system for wear prediction in lubricated sliding contacts. Lub. Sci. 1996, 8(4), 315–351. DOI: 10.1002/ls.3010080402.
   Google Scholar
• Arora, K.; Singh, A. K. Magnetorheological finishing of UHMWPE acetabular cup surface and its performance analysis. Mater. Manuf. Process. 2020, 35(11), 1631–1649. DOI: 10.1080/10426914.2020.1784928.
   Google Scholar
• Singh, M.; Singh, A. K. Magnetorheological finishing of grooved drum surface and its performance analysis in winding process. Int. J. Adv. Manuf. Tech. 2020, 106(7–8), 2921–2937. DOI: 10.1007/s00170-019-04812-w.
   Web of Science ®Google Scholar
• Tsukamoto, N.; Yano, T.; Osakai, H. Noise and transmission efficiency under deformation of tooth form of nylon gear. Bullet. JSME 1982, 25(207), 1465–1473. DOI: 10.1299/jsme1958.25.1465.
   Google Scholar