References
- Poulachon, G.; Albert, A.; Schluraff, M.;Jawahir, I.S. An Experimental Investigation of Work Material Microstructure Effects on White Layer Formation in PCBN Hard Turning. Int. J. Mach. Tools Manuf. 2005, 45, 211–218. DOI: https://doi.org/10.1016/j.ijmachtools.2004.07.009.
- Bartarya, G.; Choudhury, S. K. Effect of Tool Wear on White Layer Thickness and Subsurface Hardness on Hard Turned EN31 Steel. Int. J. Mach. Machin. Mater. 2016, 18(5/6), 483–500.
- Umbrello, D.; Jayal, A. D.; Caruso, S.; Dillon, O. W.; Jawahir, I. S. Modeling of White and Dark Layer Formation in Hard Machining of AISI 52100 Bearing Steel. Machining Sci. Technol. 2010, 14(1), 128–147.
- Manco, G. L.; Caruso, S.; Rotella, G. FE Modeling of Microstructural Changes in Hard Turning of AISI 52100 Steel. Int. J. Mater. Forming. 2010, 3(1), 447–450. DOI: https://doi.org/10.1007/s12289-010-0803-3.
- Alok, A.; Das, M. Cost-effective Way of Hard Turning with Newly Developed HSN2-coated Tool. Mater. Manufac. Proc. 2018, 33(9), 1003–1010. DOI: https://doi.org/10.1080/10426914.2017.1388521.
- Nayak, R. K.; Bartarya, G.; Sahoo, M. R. Numerical Analysis of the Effect of Tool Wear on Surface Integrity during Hard Turning. J. Mech. Sci. Technol. 2021, 35(3), 1215~1222.
- Varadarajan, A. S.; Philip, P. K.; Ramamoorthy, B. Investigations on Hard Turning with Minimal Cutting Fluid Application (HTMF) and Its Comparison with Dry and Wet Turning. Int. J. Mach Tools Manuf. 2002, 42(2), 193–200. DOI: https://doi.org/10.1016/S0890-6955(01)00119-5.
- Dhar, N. R.; Islam, M. W.; Islam, S.; Mithu, M. A. H. The Influence of Minimum Quantity Lubrication (MQL) on Cutting Temperature, Chip and Dimensional Accuracy. J. Mat. Proc. Tech. 2006, 171, 93–99. DOI: https://doi.org/10.1016/j.jmatprotec.2005.06.047.
- Chinchanikar, S.; Choudhury, S. K. Hard Turning Using HiPIMS-coated Carbide Tools: Wear Behaviour under Dry and Minimum Quantity Lubrication (MQL). Measurement. 2014, 55, 536–548. DOI: https://doi.org/10.1016/j.measurement.2014.06.002.
- Bartarya, G.; Choudhury, S. K. State of the Art in Hard Turning. Int. J. Mach. Tools Manuf. 2012, 53, 1–14. DOI: https://doi.org/10.1016/j.ijmachtools.2011.08.019.
- Zhang, X. M.; Chen, L.; Ding, H. Effects of Process Parameters on White Layer Formation and Morphology in Hard Turning of AISI52100 Steel. J. Manuf. Sci. Eng. 2016, 138(7), 074502. DOI: https://doi.org/10.1115/1.4032769.
- Zhang, X. M.; Huang, X. D.; Chen, L.; Leopold, J; Ding, H. Effects of Sequential Cuts on White Layer Formation and Retained Austenite Content in Hard Turning of AISI52100 Steel. J. Manuf. Sci. Eng. 2017, 139(6), 064502.
- Attanasio, A.; Umbrello, D.; Cappellini, C. Tool Wear Effects on White and Dark Layer Formation in Hard Turning of AISI52100 Steel. Wear. 2012, 286–287, 98–107. DOI: https://doi.org/10.1016/j.wear.2011.07.001.
- Hosseini, S. B.; Klement, U.; Yao, Y.;Ryttberg, K. Formation Mechanisms of White Layers Induced by Hard Turning of AISI52100 Steel. Acta Mater. 2015, 89, 258–267. DOI: https://doi.org/10.1016/j.actamat.2015.01.075.
- Aramcharoen, A.; Mativenga, P. T.; Manufacturing & Laser Processing Group. White Layer Formation and Hardening Effects in Hard Turning of H13 Tool Steel with CrTiAlN and CrTiAlN/MoST-coated Carbide Tools. Int J Adv. Manuf Technol 2008, 36, 650–657. DOI: https://doi.org/10.1007/s00170-006-0899-2.
- Attanasio, A.; Gelfi, M.; Giardini, C. Minimal Quantity Lubrication in Turning: Effect on Tool Wear. Wear. 2006, 260, 333–338. DOI: https://doi.org/10.1016/j.wear.2005.04.024.
- Hadad, M.; Sadeghi, B. Minimum Quantity Lubrication-MQL Turning of AISI 4140 Steel Alloy. J Clean. Prod. 2013, 54, 332–343. DOI: https://doi.org/10.1016/j.jclepro.2013.05.011.
- Masoudi, S.; Vafadar, A.; Hadad, M.; Jafarian, F. Experimental Investigation into the Effects of Nozzle Position, Workpiece Hardness, and Tool Type in MQL Turning of AISI 1045 Steel. Mater. Manuf. Proc. 2018, 33(9), 1011–1019.
- Sivaiah, P.; Ajay Kumar, G. V.; Singh, M. M.; Kumar, H. Effect of Novel Hybrid Texture Tool on Turning Process Performance in MQL Machining of Inconel 718 Superalloy. Mater. And Manuf. Proc. 2020, 35(1), 61–71.
- Sivaiah, P.; Prasad, M. G.; Singh, M. M.; Uma, B. Machinability Evaluation during Machining of AISI 52100 Steel with Textured Tools under Minimum Quantity Lubrication – A Comparative Study. Mater. And Manuf. Proc. 2020, 35(15), 1761–1768.
- Sivaiah, P.; Bodicherla, U. Effect of Surface Texture Tools and Minimum Quantity Lubrication (MQL) on Tool Wear and Surface Roughness in CNC Turning of AISI 52100 Steel. J. Inst. Eng. (India): Series C. 2020, 101(1), 85–95.
- Das, A.; Patel, S. K.; Arakha, M.; Dey, A; Biswal, B.B. Processing of Hardened Steel by MQL Technique Using Nano Cutting Fluids. Mater. And Manuf. Proc. Published Online Oct 28, 2020. DOI: https://doi.org/10.1080/10426914.2020.1832688.
- Das, A.; Das, S. R.; Patel, S. K.; Biswal, B.B. Effect of MQL and Nanofluid on the Machinability Aspects of Hardened Alloy Steel. Machin. Sci. Technol. 2020, 24(2), 291.
- Umbrello, D.;. Analysis of the White Layers Formed during Machining of Hardened AISI 52100 Steel under Dry and Cryogenic Cooling Conditions. Int. J. Adv. Manuf. Technol. 2013, 64(5–8), 633–642. DOI: https://doi.org/10.1007/s00170-012-4073-8.
- Bertolini, R.; Bedekar, V.; Ghiotti, A.; Savio, E.; Shivpuri, R; Bruschi, S. Surface Integrity and Corrosion Performances of Hardened Bearing Steel after Hard Turning. The Int. J. Adv. Manuf. Technol. 2020, 108(7), 1983–1995.
- Bhadauria, N. S.; Bartarya, G. Finish Hard Turning of EN31 Steel Using Minimum Quantity Lubrication: Surface Integrity Analysis. Proc. of Int. Conf. on Technological and Managerial strategies for next generation transformation, organised by Mangalmay Group of Institutions, Greater Noida, INDIA, Bloomsbury Publishing India Pvt. Ltd, 2017. 262–268. ISBN 9789386432667.
- Verma, J. K.; Bartarya, G.; Bhaskar, J. Effect of Minimum Quantity Lubrication on Tool Wear and Surface Integrity during Hard Turning of EN31 Steel. In Advances in Forming, Machining and Automation. Lecture Notes on Multidisciplinary Industrial Engineering; Shunmugam, M., Kanthababu, M., Eds.; Springer: Singapore, 2019; pp 205–218.
- Mane, S.; Kumar, S. Analysis of Surface Roughness during Turning of AISI 52100 Hardened Alloy Steel Using Minimal Cutting Fluid Application. Adv. Mater. Proc. Technol. 2020, 1–12. DOI: https://doi.org/10.1080/2374068X.2020.1855965.
- Bartarya, G.; Choudhury, S. K. Influence of Machining Parameters on Forces and Surface Roughness during Finish Hard Turning of EN 31 Steel. Proc. IMechE Part B, J. Engg. Manuf. 2014, 228, 1068–1080. DOI: https://doi.org/10.1177/0954405413500492.