References
- Cheung, C. F.; Lee, W. B. Study of Factors Affecting the Surface Quality in Ultra-Precision Diamond Turning. Mater. Manuf. Processes. 2000, 15(4), 481–502. DOI: https://doi.org/10.1080/10426910008913001.
- Mahajan, K. A.; Brahmankar, P. K.; Balasubramaniam, R.; Dhakad, M. R.; Experimental Investigation of Tool Vibration Effect on the Surface Roughness in Facing Operation of PMMA Material. International Review of Mechanical Engineering (IREME). 2017, 1110, 10. DOI:https://doi.org/10.15866/ireme.v11i10.12847.
- Zhang, S. J.; To, S.; Zhang, G. Q.; Zhu, Z. W. A Review of Machine Tool Vibration and Its Influence upon Surface Generation in Ultra-precision Machining. International Journal of Machine Tools Manufacturing. 2015, 91, 34–42. DOI: https://doi.org/10.1016/j.ijmachtools.2015.01.005.
- Tian, F.; Yin, Z.; Li, S.; Theoretical and Experimental Investigation on Modeling of Surface Topography Influenced by the Tool-workpiece Vibration in the Cutting Direction and Feeding Direction in Single-point Diamond Turning. International Journal Advance Manufacturing Technology. 2016, 869–12, 2433–2439. DOI:https://doi.org/10.1007/s00170-016-8363-4.
- Mahajan, K. A.; Pawade, R. Effect of Machining Parameters and Vibration on Polymethylmethacrylate Curved Surface in Single-point Diamond Turning. J. Micro Nanomanuf. 2020, 1-10. DOI: https://doi.org/10.1177/2516598420941728.
- Wang, H.; To, S.; Chan, C. Y. Investigation on the Influence of Tool-tip Vibration on Surface Roughness and Its Representative Measurement in Ultra-precision Diamond Turning. Int. J. Mach. Tools Manuf. 2013, 69, 20–29. DOI: https://doi.org/10.1016/j.ijmachtools.2013.02.006.
- Wang, H.; To, S.; Chan, C. Y.; Cheung, C. F.; Lee, W. B.; A Theoretical and Experimental Investigation of the Tool-tip Vibration and Its Influence upon Surface Generation in Single-point Diamond Turning. International Journal of Machine Tools Manufacturing. 2010, 503, 241–252. DOI:https://doi.org/10.1016/j.ijmachtools.2009.12.003.
- Meyer, P. A.; Veldhuis, S. C.; Elbestawi, M. A. Predicting the Effect of Vibration on Ultraprecision Machining Surface Finish as Described by Surface Lobes. Int. J. Mach. Tools Manuf. 2009, 49(15), 1165–1174. DOI: https://doi.org/10.1016/j.ijmachtools.2009.08.006.
- Dong-Sik, K.; In-Cheol, C.; Seung-Woo, K. Microscopic Topographical Analysis of Tool Vibration Effects on Diamond Turned Optical Surfaces. Precis. Eng. 2002, 26(2), 168–174. DOI: https://doi.org/10.1016/S0141-6359(01)00115-5.
- Lee, W. B.; Cheung, C. F. A Dynamic Surface Topography Model for the Prediction of Nano-surface Generation in Ultra-precision Machining. Int. J. Mech. Sci. 2001, 43(4), 961–991. DOI: https://doi.org/10.1016/S0020-7403(00)00050-3.
- Lin, Z.; Wang, S.; To, C. X.; Yin, S.; Liu, J., Z. J.Modelling and Prediction of Surface Topography with Three Tool-work Vibration Components in Single-point Diamond Turning. Int. J. Adv. Manuf. Technol. 1627–1639, 2018(98). DOI: https://doi.org/10.1007/s00170-018-2266-5.
- Lee, W. B.; Cheung, C. F.; To, S. Materials Induced Vibration in Ultra-precision Machining. Journal of Materials Processing Technology. 1999, 89–90, 318–325. DOI: https://doi.org/10.1016/S0924-0136(99)00146-6.
- Mahajan, K. A.; Sadaiah, M.; Gawande, S. H. Experimental Investigations of Surface Roughness on OFHC Copper by Diamond Turning Machine. International Journal of Engineering Science and Technology 2010, 2(10), 5215–5220.
- Mishra, V.; Sabui, D.; Burada, D. R.; Jha, K. V.; Khan, G.S., S.; Khan, G. S. Experimental Investigations on Slow Tool Servo Process Parameters for Freeform Optics Machining. Mater. Manuf. Processes. 2020, 35(7), 797–810. DOI: https://doi.org/10.1080/10426914.2020.1743849.
- Khatri, N.; Sharma, R.; Mishra, V.; Kumar, M.; Karar, V.; RamaGopal, V. S. An Experimental Investigation on the Influence of Machining Parameters on Surface Finish in Diamond Turning of Silicon Optics, Proc. SPIE 9654. 2015, International Conference on Optics and Photonics. DOI: https://doi.org/10.1117/12.2181525.
- Sharma, R.; Mishra, V.; Khatri, N.; Garg, H.; Karar, V.; Ramagopal, V. S. Investigation of the Factors Affecting Surface Finish and Subsurface Damage in Optical Components. Mater. Today Proc. 2018, 5(11–3), 25149–25157. DOI: https://doi.org/10.1016/j.matpr.2018.10.316.
- He, C.; Zong, W. Influence of Multifrequency Vibration on the Optical Performance of Diamond-turned Optics and Its Elimination Method. Appl. Opt. 2019, 58(16), 4241–4249. DOI: https://doi.org/10.1364/AO.58.004241.
- Mishra, V.; Khatri, N.; Nand, K.; Singh, K.; Ramagopal, S. V. Experimental Investigations on Uncontrollable Parameters for Surface Finish during Diamond Turning. Mater. Manuf. Processes. 2015, 30(2), 232–240. DOI: https://doi.org/10.1080/10426914.2014.952021.
- Liman, M.; Hossein, K.; Abdulkadir, L.; Fuzzy Logic-based Modeling and Analysis of Surface Roughness, Electrostatic Charge, and Material Removal Rate in Ultrahigh Precision Diamond Turning of Rigid Contact Lens Polymer. Materials Journal of Thermoplastic Composite Materials. 2021, 347, 952–976. DOI: https://doi.org/10.1177/0892705719850602.
- Mishra, V.; Sharma, R.; Mahajan, K.; Kumar, J.; Khatri, N.; Gupta, A.; Garg, H.; Karar, V.; Pawade, R.; Ramagopal, V. S. Experimental Investigations on Ultra-precision Machining of Polycarbonate and Related Issues. J. Micro Nanomanuf. 2020, 1–13. DOI: https://doi.org/10.1177/2516598420938495.
- Mishra, V.; Khan, G. S.; Chattopadhayay, K. D. Effects of Tool Overhang on Selection of Machining Parameters and Surface Finish during Diamond Turning. Measure. 2014, 55, 353–361. DOI: https://doi.org/10.1016/j.measurement.2014.05.019.
- Goel, B.; Singh, S.; RamaGopal, V. S. Deterministic Machining of Polymethyl Methacrylate by Single Point Diamond Turning. Mater. Manuf. Processes. 2016, 31(14), 1917–1926. DOI: https://doi.org/10.1080/10426914.2016.1140186.
- Liu, X.; DeVor, R. E.; Kapoor, S. G.; Ehmann, K. F. The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science. J. Manuf. Sci. Eng. 2004, 126(4), 666–678. DOI: https://doi.org/10.1115/1.1813469.
- Yip, W. S.; To, S. Theoretical and Experimental Investigations of Tool Tip Vibration in Single Point Diamond Turning of Titanium Alloys. Micromachines. 2019, 10(231), 231. DOI: https://doi.org/10.3390/mi10040231.
- Pagar, N. D.; Gawande, S. H. Multi-response Design Optimisation of Convolution Stresses of Metal Bellows Using Integrated PCA-GRA Approach. Australian Journal of Mechanical Engineering 2020, 1–21. DOI: https://doi.org/10.1080/14484846.2020.1725347.
- Pagar, N. D.; Gawande, S. H. Parametric Design Analysis of Meridional Deflection Stresses in Metal Expansion Bellows Using Gray Relational Grade. Journal of Brazilian Society of Mechanical Science and Engineering. 2020, 42, 256. DOI: https://doi.org/10.1007/s40430-020-02327-0
- Pawade, R. S.; Joshi, S. S. Multi-objective Optimization of Surface Roughness and Cutting Forces in High-speed Turning of Inconel 718 Using Taguchi Grey Relational Analysis (TGRA). Int. J. Adv. Manuf. Tech. 2011, 56(47–62), 47–62. DOI: https://doi.org/10.1007/s00170-011-3183-z.
- Awale, A.; Inamdar, K. Multi-objective Optimization of High-speed Turning Parameters for Hardened AISI S7 Tool Steel Using Grey Relational Analysis. J Braz. Soc. Mech. Sci. Eng. 2020, 42(356). DOI: https://doi.org/10.1007/s40430-020-02433-z.
- Kumar, S.; Ghoshal, S.; Arora, P.; Nagdeve, L. Multi-variable Optimization in Die-sinking EDM Process of AISI420 Stainless Steel. Mater. Manuf. Processes. 2021, 36(5), 572–582. DOI: https://doi.org/10.1080/10426914.2020.1843678.