References
- Gupta, K.; Gupta, M. K. Developments in Nonconventional Machining for Sustainable Production: A State-of-the-art Review. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 2019, 233(12), 4213–4232. DOI: https://doi.org/10.1177/0954406218811982.
- Rajamani, D.; Ananthakumar, K.; Balasubramanian, E.; Paulo Davim, J. Experimental Investigation and Optimization of PAC Parameters on Monel 400™ Superalloy. Mater. Manuf. Processes. 2018, 33(16), 1864–1873. DOI: https://doi.org/10.1080/10426914.2018.1532085.
- Rao, S.; Sethi, A.; Das, A. K.; Mandal, N.; Kiran, P.; Ghosh, R.; Mandal, A. Fiber Laser Cutting of CFRP Composites and Process Optimization through Response Surface Methodology. Mater. Manuf. Processes. 2017, 32(14), 1612–1621. DOI: https://doi.org/10.1080/10426914.2017.1279296.
- Kechagias, J. D.; Ninikas, K.; Petousis, M.; Vidakis, N.; Vaxevanidis, N. An Investigation of Surface Quality Characteristics of 3D Printed PLA Plates Cut by CO2 Laser Using Experimental. Mater. Manuf. Processes. 2021, 1–10. DOI: https://doi.org/10.1080/10426914.2021.1906892.
- Shrivastava, P. K.; Singh, B.; Shrivastava, Y.; Pandey, A. K.; Nandan, D. Investigation of Optimal Process Parameters for Laser Cutting of Inconel-718 Sheet. Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci. 2019, 234(8), 1581–1597. DOI: https://doi.org/10.1177/0954406219895533.
- Chaki, S.; Bose, D.; Bathe, R. N. Multi-Objective Optimization of Pulsed Nd: YAG Laser Cutting Process Using Entropy-Based ANN-PSO Model. Lasers Manuf. Mater. Process. 2020, 7(1), 88–110. DOI: https://doi.org/10.1007/s40516-019-00109-8.
- Tamilarasan, A.; Rajamani, D.; Esakki, B. Parametric Optimisation in Nd-YAG Laser Cutting of Thin Ti-6Al-4V Super Alloy Sheet Using Evolutionary Algorithms. Int. J. Mater. Prod. Technol. 2018, 57(1/2/3), 71. DOI: https://doi.org/10.1504/ijmpt.2018.092933.
- Samantaray, M.; Sahoo, S.; Thatoi, D. Modeling of Thermal and Solidification Behavior during Laser Additive Manufacturing of AlSi10Mg Alloy Powders and Its Experimental Validation. J. Laser Appl. 2019, 31(3), 32019. DOI: https://doi.org/10.2351/1.5104318.
- Wang, L.; Fu, Z.; SuessWolf, R.; Travitzky, N.; Greil, P.; Franke, J. Laser Associated Selective Metallization of Ceramic Surface with Infrared Nanosecond Laser Technology. Adv. Eng. Mater. 2019, 21(7), 1900096. DOI: https://doi.org/10.1002/adem.201900096.
- Vidyasagar, K. E. C.; Rana, A.; Kalyanasundaram, D. Optimization of Laser Parameters for Improved Corrosion Resistance of Nitinol. Mater. Manuf. Process. 2020, 1–9. DOI: https://doi.org/10.1080/10426914.2020.1784926.
- Nady, A.; Mathkoor, F. H.; Harun, S. W. Theoretical Study on Passively Mode-Locked Fiber Lasers with Saturable Absorber. Fiber Integr. Opt. 2019, 38(1), 76–89. DOI: https://doi.org/10.1080/01468030.2018.1527417.
- Liu, F.; Ji, Y.; Sun, Z.; Wang, G.; Bai, Y. Enhancing Corrosion Resistance of Al-Cu/AZ31 Composites Synthesized by a Laser Cladding and FSP Hybrid Method. Mater. Manuf. Process. 2019, 34(13), 1458–1466. DOI: https://doi.org/10.1080/10426914.2019.1661432.
- Fang, S.; Pérez, V.; Salán, N.; Baehre, D.; Llanes, L. Surface Patterning of Cemented Carbides by Means of Nanosecond Laser. Mater. Manuf. Process. 2020, 35(2), 123–129. DOI: https://doi.org/10.1080/10426914.2019.1628268.
- Liu, Z.; Yao, X.; Cheng, X.; Wu, H.; Wang, H.; Shen, H. Experimental Study on Two-Phase Boiling in Wavy Copper Microchannels Fabricated with Ultrafast Laser Micromachining. J. Micromech. Microeng. 2020, 30(6), 65011. DOI: https://doi.org/10.1088/1361-6439/ab870b.
- Wu, J.; Yang, L.; Li, Y.; Sultan, M.; Geng, D.; Chen, L. Microscopic Mechanisms of Femtosecond Laser Ablation of HMX from Reactive Molecular Dynamics Simulation. J. Phys. Chem. C. 2020, 124(21), 11681–11693. DOI: https://doi.org/10.1021/acs.jpcc.0c01567.
- Masoudi, S.; Mirabdolahi, M.; Dayyani, M.; Jafarian, F.; Vafadar, A.; Dorali, M. R. Development of an Intelligent Model to Optimize Heat-Affected Zone, Kerf, and Roughness in 309 Stainless Steel Plasma Cutting by Using Experimental Results. Mater. Manuf. Process. 2019, 34(3), 345–356. DOI: https://doi.org/10.1080/10426914.2018.1532579.
- Ahmed, N.; Rafaqat, M.; Pervaiz, S.; Umer, U.; Alkhalefa, H.; Shar, M. A.; Mian, S. H. Controlling the Material Removal and Roughness of Inconel 718 in Laser Machining. Mater. Manuf. Process. 2019, 34(10), 1169–1181. DOI: https://doi.org/10.1080/10426914.2019.1615082.
- Kraft, S.; Schille, J.; Mauersberger, S.; Schneider, L.; Loeschner, U. Time-Resolved Visualization of High-Repetition Ultrashort Pulse Laser Ablation. Appl. Opt. 2020, 59(2), 452–458. DOI: https://doi.org/10.1364/AO.59.000452.
- Jeyaprakash, N.; Yang, C. H.; Sivasankaran, S. Laser Cladding Process of Cobalt and Nickel Based Hard-Micron-Layers on 316L-Stainless-Steel-Substrate. Mater. Manuf. Process. 2020, 35(2), 142–151. DOI: https://doi.org/10.1080/10426914.2019.1692354.
- Lian, Z.; Xu, J.; Yu, Z.; Yu, P.; Ren, W.; Wang, Z.; Yu, H. Bioinspired Reversible Switch between Underwater Superoleophobicity/Superaerophobicity and Oleophilicity/Aerophilicity and Improved Antireflective Property on the Nanosecond Laser-Ablated Superhydrophobic Titanium Surfaces. ACS Appl. Mater. Interfaces. 2019, 12(5), 6573–6580. DOI: https://doi.org/10.1021/acsami.9b17639.
- Ma, J. W.; He, G. Z.; Jia, Z. Y.; Wang, X. L.; Wang, J. C. Solution of Maximum Laser Ablation Depth Based on Dynamic Energy Distribution Model. Mater. Manuf. Process. 2019, 34(15), 1719–1725. DOI: https://doi.org/10.1080/10426914.2019.1666987.
- Nemchinsky, V. A.; Severance, W. S. What We Know and What We Do Not Know about Plasma Arc Cutting. J. Phys. D. 2006, 39(22), R423. DOI: https://doi.org/10.1088/0022-3727/39/22/R01.
- Rout, A.; Deepak, B. B. V. L.; Biswal, B. B. Optimization of Process Variables of Laser Sensor Assisted Robotic GMAW Process for Mild Steel Material. Mater. Manuf. Process. 2020, 35(15), 1690–1700. DOI: https://doi.org/10.1080/10426914.2020.1784934.
- Stournaras, A.; Stavropoulos, S.; Salonitis, K.; Chryssolouris, G. An Investigation of Quality in CO2 Laser Cutting of Aluminum. CIRP J. Manuf. Sci. Technol. 2009, 2(1), 61–69. DOI: https://doi.org/10.1016/j.cirpj.2009.08.005.
- Han, T.; Xiao, M.; Zhang, Y.; Shen, Y. Laser Cladding Ni-Ti-Cr Alloy Coatings with Different Process Parameters. Mater. Manuf. Process. 2019, 34(15), 1710–1718. DOI: https://doi.org/10.1080/10426914.2019.1686521.
- Marimuthu, S.; Dunleavey, J.; Liu, Y.; Antar, M.; Smith, B. Laser Cutting of Aluminium-alumina Metal Matrix Composite. Opt. Laser Technol. 2019, 117, 251–259. DOI: https://doi.org/10.1016/j.optlastec.2019.04.029.
- Riveiro, A.; Quintero, F.; Lusquiños, F.; Comesaña, R.; Del Val, J.; Pou, J. The Role of the Assist Gas Nature in Laser Cutting of Aluminum Alloys. Phys. Procedia. 2011, 12, 548–554. DOI: https://doi.org/10.1016/j.phpro.2011.03.069.
- Leone, C.; Genna, S.; Tagliaferri, V. Cutting of AA6061 by a Multimode Pulsed Nd: YAG Laser with High Pressure Gas: Characterisation of Kerf Geometry and Quality. Int. J. Adv. Manuf. Technol. 2017, 94(1–4), 925–940. DOI: https://doi.org/10.1007/s00170-017-0804-1.
- Hossain, A.; Hossain, A.; Nukman, Y.; Hassan, M. A.; Harizam, M. Z.; Sifullah, A. M.; Parandoush, P. A Fuzzy Logic-based Prediction Model for Kerf Width in Laser Beam Machining. Mater. Manuf. Process. 2016, 31(5), 679–684. DOI: https://doi.org/10.1080/10426914.2015.1037901.
- Palanisamy, D.; Senthil, P. Machinability Study of Laser Surface Treated 15-5 PH Stainless Steel. Mater. Manuf. Process. 2016, 31(13), 1755–1762. DOI: https://doi.org/10.1080/10426914.2015.1103871.
- Kardas, O. O.; Keles, O.; Akhtar, S.; Yilbas, B. S. Laser Cutting of Rectangular Geometry in 2024 Aluminum Alloy: Thermal Stress Analysis. Opt. Laser Technol. 2014, 64, 247–256. DOI: https://doi.org/10.1016/j.optlastec.2014.05.029.
- Riveiro, A.; Quintero, F.; Del Val, J.; Boutinguiza, M.; Wallerstein, D.; Comesaña, R.; Pou, J. Laser Cutting of Aluminum Alloy Al-2024-T3. Procedia Manuf. 2017, 13, 396–401. DOI: https://doi.org/10.1016/j.promfg.2017.09.028.
- Raghavan, S.; Zhang, B.; Wang, P.; Sun, C. N.; Nai, M. L. S.; Li, T.; Wei, J. Effect of Different Heat Treatments on the Microstructure and Mechanical Properties in Selective Laser Melted INCONEL 718 Alloy. Mater. Manuf. Process. 2017, 32(14), 1588–1595. DOI: https://doi.org/10.1080/10426914.2016.1257805.
- Domashenkov, A.; Borbély, A.; Smurov, I. Structural Modifications of WC/Co Nanophased and Conventional Powders Processed by Selective Laser Melting. Mater. Manuf. Process. 2017, 32(1), 93–100. DOI: https://doi.org/10.1080/10426914.2016.1176195.
- Parthiban, A.; Sathish, T.; Chandran, S. S.; Venkatesh, R.; Vijayan, V. Optimization of CO2 Laser Cutting Parameters on Austenite Stainless Steel Using Grey Relational Analysis. Int. J. Mech. Eng. Technol. 2019, 10(1), 984–992.
- Meurling, F.; Melander, A.; Linder, J.; Larsson, M. The Influence of Mechanical and Laser Cutting on the Fatigue Strengths of Carbon and Stainless Sheet Steels. Scand. J. Metall. 2001, 30(5), 309–319. DOI: https://doi.org/10.1034/j.1600-0692.2001.300506.x.
- Tripathy, S.; Tripathy, D. K. Multi-attribute Optimization of Machining Process Parameters in Powder Mixed Electro-discharge Machining Using TOPSIS and Grey Relational Analysis. Eng. Sci. Technol. 2016, 19(1), 62–70. DOI: https://doi.org/10.1016/j.jestc.2015.07.010.
- Tran, Q. P.; Nguyen, V. N.; Huang, S. C. Drilling Process on CFRP: Multi-Criteria Decision-Making with Entropy Weight Using Grey-TOPSIS Method. Appl. Sci. 2020, 10(20), 7207. DOI: https://doi.org/10.3390/app10207207.
- Aslani, K. E.; Kitsakis, K.; Kechagias, J. D.; Vaxevanidis, N. M.; Manolakos, D. E. On the Application of Grey Taguchi Method for Benchmarking the Dimensional Accuracy of the PLA Fused Filament Fabrication Process. SN Appl. Sci. 2020, 2(6), 1–11. DOI: https://doi.org/10.1007/s42452-020-2823-z.
- Chaidas, D.; Kechagias, J. D. An Investigation of PLA/W Parts Quality Fabricated by FFF. Mater. Manuf. Process. 2021, 1–9. DOI: https://doi.org/10.1080/10426914.2021.1944193.
- Goffin, N.; Jones, L. C.; Tyrer, J.; Ouyang, J.; Mativenga, P.; Woolley, E. Characterisation of Laser System Power Draws in Materials Processing. J. Manuf. Mater. Process. 2020, 4(2), 48. DOI: https://doi.org/10.3390/jmmp4020048.
- Keles, O.; Oner, U. Laser Cutting Process: Influence of Workpiece Thickness and Laser Pulse Frequency on the Cut Quality. Arabian J. Sci. Eng. 2012, 37(8), 2277–2286. DOI: https://doi.org/10.1007/s13369-012-0306-2.