References
- Ukamanal, M.; Mishra, P. C.; Sahoo, A. K. Effects of Spray Cooling Process Parameters on Machining Performance AISI 316 Steel: A Novel Experimental Technique. Exp. Techniq. 2020, 44(1), 19–36. DOI: https://doi.org/10.1007/s40799-019-00334-y.
- Cassin, C.; Boothroyd, G. Lubricating Action of Cutting Fluids. J. Mech. Eng. Sci. 1965, 7(1), 67–81. DOI: https://doi.org/10.1243/JMES_JOUR_1965_007_012_02.
- Acayaba, G. M. A.; Escalona, P. M. D. Prediction of Surface Roughness in Low Speed Turning of AISI316 Austenitic Stainless Steel. CIRP J. Manuf. Sci. Technol. 2015, 11, 62–67. DOI: https://doi.org/10.1016/j.cirpj.2015.08.004.
- Vaxevanidis, N. M., Kechagias, J. D., Fountas, N. A., Manolakos, D. E. Evaluation of Machinability in Turning of Engineering Alloys by Applying Artificial Neural Networks. Open Constr. Build. Technol. J. 2014, 81, 389–399. DOI:https://doi.org/10.2174/1874836801408010389.
- Leppert, T. Surface Layer Properties of AISI 316L Steel When Turning under Dry and with Minimum Quantity Lubrication Conditions. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2012, 226(4), 617–631. DOI: https://doi.org/10.1177/0954405411429894.
- Vasumathy, D.; Meena, A. Influence of Micro Scale Textured Tools on Tribological Properties at Tool-Chip Interface in Turning AISI 316 Austenitic Stainless Steel. Wear. 2017, 376–377. 1747–1758, doi: https://doi.org/10.1016/j.wear.2017.01.024
- Das, A.; Patel, S. K.; Arakha, M.; Dey, A.; Biswal, B. B. Processing of Hardened Steel by MQL Technique Using Nano Cutting Fluids. Mater. Manuf. Process. 2020, 36(3), 316–328. DOI: https://doi.org/10.1080/10426914.2020.1832688.
- Kulandaivel, A.; Kumar, S. Effect of Magneto Rheological Minimum Quantity Lubrication on Machinability, Wettability and Tribological Behavior in Turning of Monel K500 Alloy. Mach. Sci. Technol. 2020, 24(5), 810–836. DOI: https://doi.org/10.1080/10910344.2020.1765179.
- Duc, T. M.; Long, T. T.; Dong, P. Q. Effect of the Alumina Nanofluid Concentration on Minimum Quantity Lubrication Hard Machining for Sustainable Production. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2019, 233(17), 5977–5988. DOI: https://doi.org/10.1177/0954406219861992.
- Bedi, S. S.; Behera, G. C.; Datta, S. Effects of Cutting Speed on MQL Machining Performance of AISI 304 Stainless Steel Using Uncoated Carbide Insert: Application Potential of Coconut Oil and Rice Bran Oil as Cutting Fluids. Arab. J. Sci. Eng. 2020, 45(11), 8877–8893. DOI: https://doi.org/10.1007/s13369-020-04554-y.
- Rao, C. M.; Sachin, B.; Rao, S. S.; Herbert, M. A. Minimum Quantity Lubrication through the Micro-Hole Textured PCD and PCBN Inserts in the Machining of the Ti–6Al–4V Alloy. Tribol. Int. 2021, 153, 106619. DOI: https://doi.org/10.1016/j.triboint.2020.106619.
- Zhang, J.; Yang, H.; Chen, S.; Tang, H. Study on the Influence of Micro-Textures on Wear Mechanism of Cemented Carbide Tools. Int. J. Adv. Manuf. Technol. 2020, 108(5–6), 1701–1712. DOI: https://doi.org/10.1007/s00170-020-05530-4.
- Khan, A. M.; Hussain, G.; Alkahtani, M.; Alzabidi, A.; Abidi, M. H.; He, N. Holistic Sustainability Assessment of Hybrid Al–GnP-Enriched Nanofluids and Textured Tool in Machining of Ti–6Al–4V Alloy. Int. J. Adv. Manuf. Technol. 2020, 1–13. DOI: https://doi.org/10.1007/s00170-020-06371-x.
- Zhang, K.; Guo, X.; Wang, C.; Meng, X.; Sun, L.; Xing, Y. Effect of Scale and Sequence of Surface Textures on the Anti-Adhesive Wear Performance of PVD Coated Tool in Dry Machining SLM-Produced Stainless Steel. Int. J. Precis. Eng. Manuf. - Green Technol. 2020, 1–16. DOI: https://doi.org/10.1007/s40684-020-00233-3.
- Elias, J. V.; Venkatesh, N.; Lawrence K, D., P.; Mathew, J. Tool Texturing for Micro-Turning Applications–an Approach Using Mechanical Micro Indentation. Mater. Manuf. Process. 2020, 36(1), 84–93. DOI: https://doi.org/10.1080/10426914.2020.1813899.
- Gajrani, K. K.; Reddy, P. K.; Ravi Sankar, R.; Tribo-Mechanical, M. And Surface Morphological Comparison of Untextured, Mechanical Micro-Textured (MμT), and Coated-MμT Cutting Tools during Machining. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 2019, 233(1), 95–111. DOI: https://doi.org/10.1177/1350650118764975.
- Pang, M.; Liu, X.; Liu, K. Effect of Conical Micro-Grooved Texture on Tool–Chip Friction Property and Cutting Performance of WC-TiC/Co Cemented Carbide Tools. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 2019, 233(5), 791–804. DOI: https://doi.org/10.1177/1350650118804907.
- Siju, A. S.; Gajrani, K. K.; Joshi, S. S. Dual Textured Carbide Tools for Dry Machining of Titanium Alloys. Int. J. Refract. Met. Hard Mater. 2021, 94, 105403. DOI: https://doi.org/10.1016/j.ijrmhm.2020.105403.
- Sivaiah, P. Evaluation of Hybrid Textured Tool Performance under Minimum Quantity Lubrication while Turning of AISI 304 Steel. J. Brazilian Soc. Mech. Sci. Eng. 2019, 41(12), 1–8. DOI: https://doi.org/10.1007/s40430-019-2069-0.
- Sivaiah, P.; Ajay Kumar, G. V.; Singh, M. M.; Kumar, H. Effect of Novel Hybrid Texture Tool on Turning Process Performance in MQL Machining of Inconel 718 Superalloy. Mater. Manuf. Process. 2019, 35(1), 61–71. DOI: https://doi.org/10.1080/10426914.2019.1697444.
- Sivaiah, P.; Singh, M. M.; Venkatesu, S.; Yoganjaneyulu, G. Investigation on Turning Process Performance Using Hybrid-Textured Tools under Dry and Conventional Cooling Environment. Mater. Manuf. Process. 2020, 35(16), 1852–1859. DOI: https://doi.org/10.1080/10426914.2020.1813893.
- Sivaiah, P.; Uma, B. Effect of Surface Texture Tools and Minimum Quantity Lubrication (MQL) on Tool Wear and Surface Roughness in CNC Turning of AISI 52100 Steel. J. Inst. Eng. Ser. C. 2020, 1011, 85–95. DOI:https://doi.org/10.1007/s40032-019-00512-2.
- Sivaiah, P.; Guru Prasad, M.; Singh, M.; Uma, B, M. Machinability Evaluation during Machining of AISI 52100 Steel with Textured Tools under Minimum Quantity Lubrication–A Comparative Study. Mater. Manuf. Process. 2020, 35(15), 1761–1768. DOI: https://doi.org/10.1080/10426914.2020.1802034.
- Sivaiah, P.; Kumar, M. R.; Subramanyam, S. B.; Prasad, K. L. V. A Comparative Study on Different Textured and Untextured Tools Performance in Turning Process. Mater. Manuf. Process. 2020, 1–10. DOI: https://doi.org/10.1080/10426914.2020.1866201.
- Kumar, V. U.; Raj, D. S. Performance Analysis of Tools with Rake Face Textures Produced Using Wire-EDM in Turning AISI4340. Mater. Manuf. Process. 2021, 36(10), 1146–1160. DOI: https://doi.org/10.1080/10426914.2021.1905826.
- Manikandan, N.; Arulkirubakaran, D.; Palanisamy, D.; Raju, R. Influence of Wire-EDM Textured Conventional Tungsten Carbide Inserts in Machining of Aerospace Materials (Ti – 6Al – 4V Alloy). Mater. Manuf. Process. 2018, 1–9. DOI: https://doi.org/10.1080/10426914.2018.1544712.
- Khani, S.; Haghighi, S. S.; Razfar, M. R.; Farahnakian, M. Optimization of Dimensional Accuracy in Threading Process Using Solid-Lubricant Embedded Textured Tools. Mater. Manuf. Process. 2021, 1–11. DOI: https://doi.org/10.1080/10426914.2021.1926492.
- Palanisamy, D.; Balasubramanian, K.; Manikandan, N.; Arulkirubakaran, D.; Ramesh, R. Machinability Analysis of High Strength Materials with Cryo-Treated Textured Tungsten Carbide Inserts. Mater. Manuf. Process. 2019, 34(5), 502–510. DOI: https://doi.org/10.1080/10426914.2019.1566612.
- Thomas, S. J.; Kalaichelvan, K. Comparative Study of the Effect of Surface Texturing on Cutting Tool in Dry Cutting. Mater. Manuf. Process. 2018, 33(6), 683–694. DOI: https://doi.org/10.1080/10426914.2017.1376070.
- Singh, R.; Manu, J. S. D.; Dogra, M. Performance Evaluation of Textured Carbide Tools under Environment ‑ Friendly Minimum Quantity Lubrication Turning Strategies. J. Brazilian Soc. Mech. Sci. Eng. 2019, 41(2), 1–13. DOI: https://doi.org/10.1007/s40430-019-1586-1.
- Sun, J.; Zhou, Y.; Deng, J.; Zhao, J. Effect of Hybrid Texture Combining Micro-Pits and Micro-Grooves on Cutting Performance of WC/Co-Based Tools. Int. J. Adv. Manuf. Technol. 2016, 86(9–12), 3383–3394. DOI: https://doi.org/10.1007/s00170-016-8452-4.
- Rajbongshi, S. K.; Singh, M. A.; Sarma, D. K. A Comparative Study in Machining of AISI D2 Steel Using Textured and Non- Textured Coated Carbide Tool at the Fl Ank Face. J. Manuf. Process. May 2018, 36, 360–372. DOI: https://doi.org/10.1016/j.jmapro.2018.10.041.