Parameter effects and process modeling of FFF-TPU mechanical response

References

• Chaidas, D.; Kechagias, J. D. An Investigation of PLA/W Parts Quality Fabricated by FFF. Mater. Manuf. Processes. 2021, 1–9. DOI: 10.1080/10426914.2021.1944193.
   Web of Science ®Google Scholar
• Mohan, N.; Senthil, P.; Vinodh, S.; Jayanth, N. A Review on Composite Materials and Process Parameters Optimisation for the Fused Deposition Modelling Process. Virtual. Phys. Prototyp. 2017, 12(1), 47–59. DOI: 10.1080/17452759.2016.1274490.
   Web of Science ®Google Scholar
• Leng, J.; Wu, J.; Chen, N.; Xu, X.; Zhang, J. The Development of a Conical Screw-based Extrusion Deposition System and Its Application in Fused Deposition Modeling with Thermoplastic Polyurethane. Rapid Prototyp. J. 2020, 26(2), 409–417. DOI: 10.1108/RPJ-05-2019-0139.
   Web of Science ®Google Scholar
• Vidakis, N.; Petousis, M.; Maniadi, A.; Koudoumas, E.; Kenanakis, G.; Romanitan, C.; Tutunaru, O.; Suchea, M.; Kechagias, J. The Mechanical and Physical Properties of 3D-Printed Materials Composed of ABS-ZnO Nanocomposites and ABS-ZnO Microcomposites. Micromachines. 2020, 11(6), 615. DOI: 10.3390/mi11060615.
   PubMed Web of Science ®Google Scholar
• Kechagias, J. D.; Ninikas, K.; Petousis, M.; Vidakis, N.; Vaxevanidis, N. An Investigation of Surface Quality Characteristics of 3D Printed PLA Plates Cut by CO2 Laser Using Experimental Design. Mater. Manuf. Processes. 2021, 1–10. DOI: 10.1080/10426914.2021.1906892.
   Web of Science ®Google Scholar
• Kabir, S.; Kim, H.; Lee, S. Physical Property of 3D-printed Sinusoidal Pattern Using Shape Memory TPU Filament. Text. Res. J. 2020, 90(21–22), 2399–2410. DOI: 10.1177/0040517520919750.
   Web of Science ®Google Scholar
• Dijkshoorn, A.; Werkman, P.; Welleweerd, M.; Wolterink, G.; Eijking, B.; Delamare, J.; Sanders, R.; Krijnen, G. J. Embedded Sensing: Integrating Sensors in 3-D Printed Structures. J. Sens. Sens. Syst. 2018, 7(1), 169–181. DOI: 10.5194/jsss-7-169-2018.
   Web of Science ®Google Scholar
• Xiao, J.; Gao, Y. The Manufacture of 3D Printing of Medical Grade TPU. Prog. Addit. Manuf. 2017, 2(3), 117–123. DOI: 10.1007/s40964-017-0023-1.
   Google Scholar
• Slapnik, J.; Pulko, I.; Rudolf, R.; Anžel, I.; Brunčko, M. Fused Filament Fabrication of Nd-Fe-B Bonded Magnets: Comparison of PA12 and TPU Matrices. Addit. Manuf. 2021, 101745(38). DOI: 10.1016/j.addma.2020.101745.
   Google Scholar
• Kim, K.; Park, J.; Suh, J.-H.; Kim, M.; Jeong, Y.; Park, I. 3D Printing of Multiaxial Force Sensors Using Carbon Nanotube (Cnt)/thermoplastic Polyurethane (TPU) Filaments. Sens. Actuators, A. 2017, 263, 493–500. DOI: 10.1016/j.sna.2017.07.020.
   Google Scholar
• Liu, J.; Li, W.; Guo, Y.; Zhang, H.; Zhang, Z. Improved Thermal Conductivity of Thermoplastic Polyurethane via Aligned Boron Nitride Platelets Assisted by 3D Printing. Compos. A 2019, 120, 140–146. DOI: 10.1016/j.compositesa.2019.02.026.
   Google Scholar
• 3D Printerly. https://3dprinterly.com/filament-printing-guide/tpu/ (accessed Jul 22, 2021).
   Google Scholar
• El Magri, A.; Vanaei, S.; Vaudreuil, S. An Overview on the Influence of Process Parameters through the Characteristic of 3D-printed PEEK and PEI Parts. High Perform. Polym. 2021, 09540083211009961. DOI: 10.1177/09540083211009961.
   Web of Science ®Google Scholar
• Han, Y.; Kim, J. A Study on the Mechanical Properties of Knit Fabric Using 3D Printing-Focused on PLA, TPU Filament. J. Fashion Business 2018, 22(4), 93–105. DOI: 10.12940/JFB.2018.22.4.93.
   Google Scholar
• Spoerk, M.; Gonzalez-Gutierrez, J.; Sapkota, J.; Schuschnigg, S.; Holzer, C. Effect of the Printing Bed Temperature on the Adhesion of Parts Produced by Fused Filament Fabrication. Plast., Rubber Compos. 2018, 47(1), 17–24. DOI: 10.1080/14658011.2017.1399531.
   Web of Science ®Google Scholar
• Vidakis, N.; Petousis, M.; Velidakis, E.; Liebscher, M.; Mechtcherine, V.; Tzounis, L. On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers. Polymers. 2020, 12(12), 2924. DOI: 10.3390/polym12122924.
   PubMed Web of Science ®Google Scholar
• Dwiyati, S. T.; Kholil, A.; Riyadi, R.; Putra, S. E. Influence of Layer Thickness and 3D Printing Direction on Tensile Properties of ABS Material. J. Phys. 2019, 1402, 066014. DOI: 10.1088/1742-6596/1402/6/066014.
   Google Scholar
• Abbas, T. F.; Othman, F. M.; Ali, H. B. Influence of Layer Thickness on Impact Property of 3D-printed PLA. Int. Res. J. Eng. Technol. (Irjet). 2018, 5, 1–4.
   Google Scholar
• Erokhin, K. S.; Gordeev, E. G.; Ananikov, V. P. Revealing Interactions of Layered Polymeric Materials at Solid-liquid Interface for Building Solvent Compatibility Charts for 3D Printing Applications. Sci. Rep. 2019, 9(1), 20177. DOI: 10.1038/s41598-019-56350-w.
   PubMedGoogle Scholar
• Wang, J.; Yang, B.; Lin, X.; Gao, L.; Liu, T.; Lu, Y.; Wang, R. Research of TPU Materials for 3D Printing Aiming at Non-Pneumatic Tires by FDM Method. Polymers. 2020, 12(11), 2492. DOI: 10.3390/polym12112492.
   PubMed Web of Science ®Google Scholar
• Sun, Q.; Rizvi, G. M.; Bellehumeur, C. T.; Gu, P. Effect of Processing Conditions on the Bonding Quality of FDM Polymer Filaments. Rapid Prototyp. J. 2008, 14(2), 72–80. DOI: 10.1108/13552540810862028.
   Web of Science ®Google Scholar
• Vanaei, H.; Shirinbayan, M.; Deligant, M.; Raissi, K.; Fitoussi, J.; Khelladi, S.; Tcharkhtchi, A. Influence of Process Parameters on Thermal and Mechanical Properties of Polylactic Acid Fabricated by Fused Filament Fabrication. Polym. Eng. Sci. 2020, 60(8), 1822–1831. DOI: 10.1002/pen.25419.
   Web of Science ®Google Scholar
• Lužanin, O.; Movrin, D.; Plančak, M. Effect of Layer Thickness, Deposition Angle, and Infill on Maximum Flexural Force in FDM-built Specimens. J. Technol. Plast. 2014, 39(1), 49–58.
   Google Scholar
• Christiyan, K. J.; Chandrasekhar, U., and Venkateswarlu, K. A Study on the Influence of Process Parameters on the Mechanical Properties of 3D Printed ABS Composite. IOP Conf. Ser.: Mater. Sci. Eng. 2016,114, 012109 . DOI: 10.1088/1757-899X/114/1/012109.
   Google Scholar
• Srivastava, M.; Rathee, S. Optimisation of FDM Process Parameters by Taguchi Method for Imparting Customised Properties to Components. Virtual. Phys. Prototyp. 2018, 13(3), 203–210. DOI: 10.1080/17452759.2018.1440722.
   Web of Science ®Google Scholar
• Coogan, T. J.; Kazmer, D. O. Bond and Part Strength in Fused Deposition Modeling. Rapid Prototyp. J. 2017, 23(2), 414–422. DOI: 10.1108/RPJ-03-2016-0050.
   Web of Science ®Google Scholar
• Phadke, M. S. Quality Engineering Using Robust Design; New Jersey: PTR Prentice Hall, 1989.
   Google Scholar
• Aslani, K.-E.; Kitsakis, K.; Kechagias, J. D.; Vaxevanidis, N. M.; Manolakos, D. E. On the Application of Grey Taguchi Method for Benchmarking the Dimensional Accuracy of the PLA Fused Filament Fabrication Process. SN Appl. Sci. 2020, 2(6), 1–11. DOI: 10.1007/s42452-020-2823-z.
   Web of Science ®Google Scholar