Investigation of hole roundness-error using different electrolytes in STED process

References

• Xu, J.; Ji, M.; Chen, M., Ren, F. Investigation of Minimum Quantity Lubrication Effects in Drilling CFRP/Ti6Al4V Stacks. Mater. Manuf. Process. Internet]. 2019;34(12):1401–1410. DOI:10.1080/10426914.2019.1661431.
   Web of Science ®Google Scholar
• Mahesh, K.; Philip, J. T.; Joshi, S. N., Kuriachen, B. Machinability of Inconel 718: A Critical Review on the Impact of Cutting Temperatures. Mater. Manuf. Process. Internet]. 2021, 36(7), 753–791. 10.1080/10426914.2020.1843671
   Web of Science ®Google Scholar
• Krishnan, A. N.; Mathew, J. Size Effect and Micro Endmilling Performance while Sustainable Machining on Inconel 718. Mater. Manuf. Process.2021, 36(6), 668–676 doi:10.1080/10426914.2020.1854465.
   Web of Science ®Google Scholar
• Khadtare, A.; Pawade, R.; Varghese, A.; Joshi, S. Micro-drilling of Straight and Inclined Holes on Thermal Barrier Coated Inconel 718 for Turbine Blade Cooling. Mater. Manuf. Process. Internet]. 2020;35(7):783–796. DOI:10.1080/10426914.2020.1740253.
   Web of Science ®Google Scholar
• Venkatesan, K.; Devendiran, S.; Bhupatiraju, S. C. S. R.; Kolluru, S.; Pavan Kumar, C. Experimental Investigation and Optimization of Micro-drilling Parameters on Inconel 800 Superalloy. Mater. Manuf. Process. Internet]. 2020;35(11):1214–1227. DOI:10.1080/10426914.2020.1746333.
   Web of Science ®Google Scholar
• Sharma, V. S.; Vats, A.; Ansari, I. Effects of Parameters on Burr Heights and Diametral Error in Dry Drilling International Journal of Additive and Subtractive Materials Manufacturing . Int J Addit Subtractive Mater Manuf [Internet. 2017,1(3/4), 223–239. doi:10.1504/IJASMM.2017.10010907
   Google Scholar
• Jafarian, F. Electro Discharge Machining of Inconel 718 Alloy and Process Optimization. Mater. Manuf. Process. Internet]. 2020;35(1):95–103. DOI:10.1080/10426914.2020.1711919.
   Web of Science ®Google Scholar
• Singh, R.; Dvivedi, A.; Kumar, P. EDM of High Aspect Ratio Micro-holes on Ti-6Al-4V Alloy by Synchronizing Energy Interactions. Mater. Manuf. Process. Internet]. 2020;35(11):1188–1203. DOI:10.1080/10426914.2020.1762207.
   Web of Science ®Google Scholar
• Zhang, A.; Xu, Z.; Lu, J.; Wang, Y. Improvement of Blade Platform Accuracy in ECM Utilizing an Auxiliary Electrode. Mater. Manuf. Process. Internet]. 2020;35(9):951–960. DOI:10.1080/10426914.2020.1752920.
   Web of Science ®Google Scholar
• Jain, V. K.; Chavan, A.; Kulkarni, A. Analysis of Contoured Holes Produced Using STED Process International Journal of Advanced Manufacturing Technology . 2009, 44(1–2), 133–148. DOI: 10.1007/s00170-008-1821-x.
   Web of Science ®Google Scholar
• Jain, V. K.; Lal, G. K.; Kanetkar, Y. Stray Current Attack and Stagnation Zones in Electrochemical Drilling International Journal of Advanced Manufacturing Technology . Int. J. Adv. Manuf. Technol. 2005,26(5–6), 527–536. DOI: 10.1007/s00170-004-2264-7.
   Web of Science ®Google Scholar
• Rathod, V.; Doloi, B.; Bhattacharyya, B. Sidewall Insulation of Microtool for Electrochemical Micromachining to Enhance the Machining Accuracy. Mater. Manuf. Process. 2014, 29(3), 305–313. DOI: 10.1080/10426914.2013.864407.
   Web of Science ®Google Scholar
• Soundarrajan, M.; Thanigaivelan, R. Effect of Coated and Geometrically Modified Tools on Performance of Electrochemical Micromachining. Mater. Manuf. Process. Internet]. 2020;35(7):775–782. DOI:10.1080/10426914.2020.1740252.
   Web of Science ®Google Scholar
• Fang, X.; Qu, N.; Zhang, Y., Xu, Z., Zhu, D. Improvement of hole exit accuracy in electrochemical drilling by applying a potential difference between an auxiliary electrode and the anode. J. Mater. Process. Technol. Internet]. 2014;214(3):556–564. DOI:10.1080/10426914.2020.1740253.
   Web of Science ®Google Scholar
• Vinod Kumaar, J. R.; Thanigaivelan, R. Performance of Magnetic Field-assisted Citric Acid Electrolyte on Electrochemical Micro-machining of SS 316L. Materials and Manufacturing Processes. Internet]. 2020;35(9):969–977. DOI:10.1080/10426914.2020.1740253.
   Web of Science ®Google Scholar
• Thanigaivelan, R.; Arunachalam, R. M.; Kumar, M.; Dheeraj, B. P. Performance of Electrochemical Micromachining of Copper through Infrared Heated Electrolyte. Materials and Manufacturing Processes. Internet]. 2018;33(4):383–389. DOI:10.1080/10426914.2017.1279304.
   Web of Science ®Google Scholar
• Maniraj, S.; Thanigaivelan, R. Effect of Electrode Heating on Performance of Electrochemical Micromachining. Materials and Manufacturing Processes. Internet]. 2019;34(13):1494–1501. DOI:10.1080/10426914.2020.1711919.
   Web of Science ®Google Scholar
• Rahman, Z.; Das, A. K.; Chattopadhyaya, S. Microhole Drilling through Electrochemical Processes: A Review. Materials and Manufacturing Processes. Internet]. 2018;33(13):1379–1405. DOI:10.1080/10426914.2020.1762207.
   Web of Science ®Google Scholar
• Wang, X.; Qu, N.; Fang, X.; Li, H. Electrochemical Drilling with Constant Electrolyte Flow. Journal of Materials Processing Technology. Internet]. 2016;238:1–7. DOI:10.1016/j.jmatprotec.2016.06.033.
   Web of Science ®Google Scholar
• Anasane, S. S.; Bhattacharyya, B. Experimental Investigation on Suitability of Electrolytes for Electrochemical Micromachining of Titanium. The International Journal of Advanced Manufacturing Technology. Internet]. 2016;86(5–8):2147–2160. DOI:10.1080/10426914.2013.864407.
   Web of Science ®Google Scholar
• Wang, D.; Zhu, Z.; Bao, J., Zhu, D. Reduction of Stray Corrosion by Using Iron Coating in NaNO3 Solution during Electrochemical Machining. The International Journal of Advanced Manufacturing Technology. 2015, 76(5–8), 1365–1370 doi:10.1007/s00170-014-6351-0.
   Web of Science ®Google Scholar
• Zhu, D.; Yu, L.; Zhang, R. Dissolution Effects with Different Microstructures of Inconel 718 on Surface Integrity in Electrochemical Machining. Journal of the Electrochemical Society. 2018, 165(16), E872–E878. DOI: 10.1149/2.0761816jes.
   Web of Science ®Google Scholar
• Wang, D.; He, B.; Cao, W. Enhancement of the Localization Effect during Electrochemical Machining of Inconel 718 by Using an Alkaline Solution. Appl. Sci.2019, 9(4), 690. doi:10.3390/app9040690.
   Google Scholar
• Vats, A.; Dvivedi, A.; Kumar, P. Assessing the Performance of STED Process for Fabricating High Aspect Ratio Holes on Inconel 718 Alloy. Materials and Manufacturing Processes. Internet]. 2021;36(6):677–692. DOI:10.1080/10426914.2020.1866189.
   Web of Science ®Google Scholar
• Rajkeerthi, E.; Hariharan, P.; Pradeep, N. Enhancing Machining Rate and Geometrical Accuracy in Electrochemical Micromachining of Co-Ni-Cr-W Superalloy. Materials and Manufacturing Processes. Internet]. 2021;36(4):488–500. DOI:10.1080/10426914.2020.1843672.
   Web of Science ®Google Scholar
• Haynes, W. M.;. CRC Handbook of Chemistry and Physics, 97th ed.; CRC Press: Boca Raton, FL, USA, 2017.
   Google Scholar
• Isono, T.;. Density, Viscosity, and Electrolytic Conductivity of Concentrated Aqueous Electrolyte Solutions at Several Temperatures. Alkaline-earth Chlorides, Lanthanum Chloride, Sodium Chloride, Sodium Nitrate, Sodium Bromide, Potassium Nitrate, Potassium Bromide, and Cadmium Nitrate. Journal of Chemical & Engineering Data. 1984, 29(1), 45–52. DOI: 10.1021/je00035a016.
   Web of Science ®Google Scholar
• Dean, J. A.;. Lange’s Handbook of Chemistry; McGraw-Hill, Inc: New York, 1999; pp 15.
   Google Scholar
• Bilgi, D. S.; Kumar, R.; Jain, V. K.; Shekhar, R. Predicting Radial Overcut in Deep Holes Drilled by Shaped Tube Electrochemical Machining. The International Journal of Advanced Manufacturing Technology. 2008, 39(1–2), 47–54 doi:10.1007/s00170-007-1185-7.
   Web of Science ®Google Scholar
• Smets, N.; Van Damme, S.; De Wilde, D.; Weyns, G.; Deconinck, J. Time Averaged Temperature Calculations in Pulse Electrochemical Machining, Part II: Numerical Simulation. Journal of Applied Electrochemistry. 2008, 38(4), 551–560 doi:10.1007/s10800-007-9472-4.
   Web of Science ®Google Scholar
• Singh, T.; Dvivedi, A. Impact of Gas Film Thickness on the Performance of RM-ECDM Process during Machining of Glass. Mater. Manuf. Process. 2021, 00, 1–12. Available from. DOI: 10.1080/10426914.2021.1945092.
   Google Scholar
• Shamim, F. A.; Dvivedi, A.; Kumar, P. On Near-dry Wire ECDM of Al6063/SiC/10p MMC. Materials and Manufacturing Processes. Internet]. 2021;36(1):122–134. DOI:10.1007/s10800-007-9472-4.
   Web of Science ®Google Scholar
• Yadav, V. K.; Kumar, P.; Dvivedi, A. Effect of Tool Rotation in Near-dry EDM Process on Machining Characteristics of HSS. Materials and Manufacturing Processes. Internet]. 2019;34(7):779–790. DOI:10.1080/10426914.2019.1605171.
   Web of Science ®Google Scholar
• Palani, S.; Lakshmanan, P.; Kaliyamurthy, R. Experimental Investigations of Electrochemical Micromachining of Nickel Aluminum Bronze Alloy. Mater. Manuf. Process. Internet]. 2020;35:1860–1869. Available from. DOI:10.1080/10426914.2020.1813888
   Google Scholar
• Geethapriyan, T.; Kalaichelvan, K.; Muthuramalingam, T. Multi Performance Optimization of Electrochemical Micro-machining Process Surface Related Parameters on Machining Inconel 718 Using Taguchi-grey Relational Analysis. Metall. Ital. 2016, 108, 13–19.
   Google Scholar
• Datta, M.; Landolt, D. Film Breakdown on Nickel under Transpassive Dissolution Conditions in Sodium Nitrate Solutions. Journal of the Electrochemical Society. 1977, 124(4), 483–489. DOI: 10.1149/1.2133334.
   Web of Science ®Google Scholar
• Sharma, S.; Jain, V. K.; Shekhar, R. Electrochemical Drilling of Inconel Superalloy with Acidified Sodium Chloride Electrolyte. The International Journal of Advanced Manufacturing Technology. 2002, 19(7), 492–500. DOI: 10.1007/s001700200052.
   Web of Science ®Google Scholar
• Laidler, K. J.;. The Development of the Arrhenius Equation. Journal of Chemical Education. 1984, 61(6), 494–498. DOI: 10.1021/ed061p494.
   Web of Science ®Google Scholar
• Tiwari, T.; Dvivedi, A.; Kumar, P. Internet]. 2021;00:1–13. Available from. Investigations on the Fabrication of a Patterned Tool by Chemical Etching. Mater. Manuf. Process. DOI: 10.1080/10426914.2021.1926491.
   Google Scholar
• Wildgoose, G. G.; Giovanelli, D.; Lawrence, N. S.; Compton, R. G. High-temperature Electrochemistry: A Review. Electroanalysis. 2004, 16(6), 421–433 doi:10.1002/elan.200302875.
   Web of Science ®Google Scholar
• Chang, C. S.; Hourng, L. W. Two-dimensional Two-phase Numerical Model for Tool Design in Electrochemical Machining. Journal of Applied Electrochemistry. 2001, 31(2), 145–154. DOI: 10.1023/A:1004115303419.
   Web of Science ®Google Scholar
• Bhattacharyya, B.; 2015 Electrochemical Micromachining for Nanofabrication, MEMS and Nanotechnology (William Andrew)1–270 9780323327374 doi:10.1016/C2014-0-00027-5 .
   Google Scholar