References
- Astashev, V. K. Effect of Ultrasonic Vibrations of a Single Point Tool on the Process of Cutting. J. Mach. Manuf. Reliability. 1992, 5(3), 65–70.
- Zhang, L.; Hashimoto, T.; Yan, J. Machinability Exploration for High-entropy Alloy FeCrCoMnNi by Ultrasonic Vibration-assisted Diamond Turning. CIRP Annals. 2021, 70(1), 37–40. DOI: https://doi.org/10.1016/j.cirp.2021.04.090.
- Li, Z.; Guo, H.; Li, L.; Zhang, D.; Jiang, X. Study on Surface Quality and Tool Life in Ultrasonic Vibration Countersinking of Titanium Alloys (Ti6al4v). The Int. J. Adv. Manuf. Tech. 2019, 103(1–4), 1119–1137. DOI: https://doi.org/10.1007/s00170-019-03572-x.
- Liu, X.; Wu, D.; Zhang, J. Fabrication of Micro-textured Surface Using Feed-direction Ultrasonic Vibration-assisted Turning. The Int. J. Adv. Manuf. Tech. 2018, 97, 3849–3857. DOI: https://doi.org/10.1007/s00170-018-2082-y.
- Liu, X.; Wu, D.; Zhang, J.; Hu, X.; Cui, P. Analysis of Surface Texturing in Radial Ultrasonic Vibration-assisted Turning. J. Mat. Proc. Tech. 2019, 267, 186–195. DOI: https://doi.org/10.1016/j.jmatprotec.2018.12.021.
- Zhang, J.; Wang, D. Investigations of Tangential Ultrasonic Vibration Turning of Ti6Al4V Using Finite Element Method. Int. J. Mat. Form. 2019, 12, 257–267. DOI: https://doi.org/10.1007/s12289-018-1402-y.
- Babitsky, V. I.; Kalashnikov, A. N.; Meadows, A.; Wijesundara, A. A. H. P. Ultrasonically Assisted Turning of Aviation Materials. J. Mat. Proc. Tech. 2003, 132(1–3), 157–167. DOI: https://doi.org/10.1016/S0924-0136(02)00844-0.
- Khanna, N.; Shah, P.; Agrawal, C.; Pusavec, F.; Hegab, H. Inconel 718 Machining Performance Evaluation Using Indigenously Developed Hybrid Machining Facilities: Experimental Investigation and Sustainability Assessment. The Int. J. Adv. Manuf. Tech. 2020, 106, 4987–4999. DOI: https://doi.org/10.1007/s00170-020-04921-x.
- Khajehzadeh, M.; Boostanipour, Q.; Razfar, M. R. Finite Element Simulation and Experimental Investigation of Residual Stresses in Ultrasonic Assisted Turning. Ultrasonics. 2020, 108, 106208. DOI: https://doi.org/10.1016/j.ultras.2020.106208.
- Airao, J.; Khanna, N.; Roy, A.; Hegab, H. Comprehensive Experimental Analysis and Sustainability Assessment of Machining Nimonic 90 Using Ultrasonic-assisted Turning Facility. The Int. J. Adv. Manuf. Tech. 2020, 109, 1447–1462. DOI: https://doi.org/10.1007/s00170-020-05686-z.
- Sharma, V. S.; Dogra, M.; Suri, N. M. Advances in the Turning Process for Productivity Improvement – A Review. J. Eng. Manuf. 2008, 222(11), 1417–1442. DOI: https://doi.org/10.1243/09544054JEM1199.
- Bayat, M.; Amini, S.; Hadidi, M. Effect of Ultrasonic-assisted Turning on Geometrical Tolerances in Al 2024-T6. Mat. Manuf. Proc. 2021, 36, 1875–1886. DOI: https://doi.org/10.1080/10426914.2021.1926496.
- Amini, S.; Soleimanimehr, H.; Nategh, M. J.; Abudollah, A.; Sadeghi, M. H. FEM Analysis of Ultrasonic Assisted Turning and the Vibratory Tool. J. Mat. Proc. Tech. 2008, 20, 43–47. DOI: https://doi.org/10.1016/j.jmatprotec.2007.11.271.
- Mitrofanov, A. V.; Babitsky, V. I.; Silberschmidt, V. V. Finite Element Analysis of Ultrasonically Assisted Turning of Inconel 718. J. Mat. Proc. Tech. 2004, 153–154, 233–239.
- Seah, K. H. W.; Wong, Y. S.; Lee, L. C. Design of Tool Holders for Ultrasonic Machining Using FEM. J. Mat. Proc. Tech. 1993, 37, 801–816. DOI: https://doi.org/10.1016/0924-0136(93)90138-V.
- Nad, M. Ultrasonic Horn Design for Ultrasonic Machining Technologies, App.and Comp. Mechanics. 2010, 4, 79–88.
- Banerjee, B.; Pradhan, S.; Das, S.; Chakraborty, A.; Dhupal, D. Horn Design and Analysis in Ultrasonic Machining Process Using ANSYS. Adv. Mat. Proc. Tech. 2021. DOI: https://doi.org/10.1080/2374068X.2021.1945266.
- Xu, L.; Liang, C.; Yang, L.; Shi, Z. Design and Study of Composite Horn in Ultrasonic Vibration Turning. Machinery Design Manuf. 2014, en.cnki.com.cn.
- Mohanty, A.; Talla, G.; Gangopadhyay, S. Experimental Investigation and Analysis of EDM Characteristics of Inconel 825. Mater. Manuf. Process. 2014, 29(5), 540–549. DOI: https://doi.org/10.1080/10426914.2014.901536.
- Wu, H. H. A Comparative Study of Using Grey Relational Analysis in Multiple Attribute Decision Making Problems. Qual. Eng. 2006, 15(2), 209–217. DOI: https://doi.org/10.1081/QEN-120015853.
- Kumar, S.; Dvivedi, A. Development of Material Removal Rate Model and Performance Evaluation of Ultrasonic Turning Process. Mat. Manuf. Process. 2020, 35(14), 1598–1611. DOI: https://doi.org/10.1080/10426914.2020.1784929.
- Mikolajczyk, T. Modeling of Minimal Thickness Cutting Layer Influence on Surface Roughness in Turning. App. Mech. Mat. 2014, 656, 262–269. www.scientific.net/amm.656.262
- Jamshidi, H.; Nategh, M. J. Theoretical and Experimental Investigation of the Frictional Behavior of the Tool–chip Interface in Ultrasonic-vibration Assisted Turning. Int. J. Machine Tools Manuf. 2013, 65, 1–7. DOI: https://doi.org/10.1016/j.ijmachtools.2012.09.004.
- Mikołajczyk, T.; Latos, H.; Pimenov, D. Y.; Paczkowski, T.; Gupta, M. K.; Krolczyk, G. Influence of the Main Cutting Edge Angle Value on Minimum Uncut Chip Thickness during Turning of C45 Steel. J. Manuf. Proc. 2020, 57, 354–362. DOI: https://doi.org/10.1016/j.jmapro.2020.06.040.