References
- Ravisubramanian, S.; Shunmugam, M. S. Investigations into Peck Drilling Process for Large Aspect Ratio Microholes in Aluminum 6061-T6. Mater. Manuf. Process. 2018, 33(9), 935–942. DOI: https://doi.org/10.1080/10426914.2017.1376076.
- Ke, F.; Ni, J.; Stephenson, D. Chip Thickening in Deep-Hole Drilling. Int. J. Mach. Tools Manuf. 2006, 46, 1500–1507. DOI: https://doi.org/10.1016/j.ijmachtools.2005.09.022.
- Han, C.; Zhang, D.; Luo, M.; Wu, B. Chip Evacuation Force Modelling for Deep Hole Drilling with Twist Drills. Int. J. Adv. Manuf. Technol. 2018, 98(9–12), 3091–3103. DOI: https://doi.org/10.1007/s00170-018-2488-6.
- Biermann, D.; Bleicher, F.; Heisel, U.; Klocke, F.; Möhring, H.; Shih, A. Deep Hole Drilling. CIRP Ann. Manuf. Technol. 2018, 67, 673–694. DOI: https://doi.org/10.1016/j.cirp.2018.05.007.
- Zabel, A.; Heilmann, M. Deep Hole Drilling Using Tools with Small Diameters — Process Analysis and Process Design. CIRP Ann. Manuf. Technol. 2012, 61(1), 111–114. DOI: https://doi.org/10.1016/j.cirp.2012.03.002.
- Ahmed, A.; Lew, M. T.; Diwakar, P.; Senthil Kumar, A.; Rahman, M. A Novel Approach in High Performance Deep Hole Drilling of Inconel 718. Precis. Eng. 2019, 56, 432–437. DOI: https://doi.org/10.1016/j.precisioneng.2019.01.012.
- Uhlmann, E.; Richarz, S. Twisted Deep Hole Drilling Tools for Hard Machining. J. Manuf. Process. 2016, 24, 225–230. DOI: https://doi.org/10.1016/j.jmapro.2016.09.013.
- Daniel, C. D. Drilling Deep Holes on a Vmc. https://www.mmsonline.com/articles/drilling-deep-holes-on-a-vmc.
- Nath, C.; Kurfess, T. Obstruction - Type Chip Breakers for Controllable Chips and Improved Cooling/Lubrication during Drilling – A Feasibility Study 2 Machining Chip Formation. Procedia Manuf. 2016, 5, 375–385. DOI: https://doi.org/10.1016/j.promfg.2016.08.032.
- Biermann, D.; Wolf, M.; Aßmuth, R. Cutting Edge Preparation to Enhance the Performance of Single Lip Deep Hole Drills. Procedia CIRP. 2012, 1(1), 172–177. DOI: https://doi.org/10.1016/j.procir.2012.04.030.
- Ogawa, M.; Nakayama, K. Effects of Chip Splitting Nicks in Drilling. CIRP Ann. Manuf. Technol. 1985, 34(1), 101–104. DOI: https://doi.org/10.1016/S0007-8506(07)61733-8.
- Li, X. B.; Zheng, J. M.; Li, Y.; Kong, L. F.; Shi, W. C.; Guo, B. Investigation of Chip Deformation and Breaking with a Staggered Teeth BTA Tool in Deep Hole Drilling. Metals (Basel). 2019, 9(1). DOI: https://doi.org/10.3390/met9010046.
- Degenhardt, J. A.; Devor, R. E.; Kapoor, S. G. Generalized Groove-Type Chip Breaker Effects on Drilling for Different Drill Diameters and Flute Shapes. Int. J. Mach. Tools Manuf. 2005, 45, 1588–1597. DOI: https://doi.org/10.1016/j.ijmachtools.2005.02.009.
- Chu, N. H.; Nguyen, V. D.; Do, T. V. Ultrasonic-Assisted Cutting: A Beneficial Application for Temperature, Torque Reduction, and Cutting Ability Improvement in Deep Drilling of Al-6061. Appl. Sci. 2018, 8(10), 1–11. DOI: https://doi.org/10.3390/app8101708.
- Chu, N.-H.; Nguyen, V.-D.; Ngo, Q.-H. Machinability Enhancements of Ultrasonic-Assisted Deep Drilling of Aluminum Alloys. Mach. Sci. Technol. 2020, 24(1), 112–135. DOI: https://doi.org/10.1080/10910344.2019.1636267.
- Chen, Y.; Wang, J.; Chen, M. Enhancing the Machining Performance by Cutting Tool Surface Modifications: A Focused Review. Mach. Sci. Technol. 2019, 23(3), 477–509. DOI: https://doi.org/10.1080/10910344.2019.1575412.
- Ranjan, P.; Hiremath, S. S. Role of Textured Tool in Improving Machining Performance: A Review. J. Manuf. Process. 2019, 43(May), 47–73. DOI: https://doi.org/10.1016/j.jmapro.2019.04.011.
- Ribeiro, F. S. F.; Lopes, J. C.; Bianchi, E. C.; de Angelo Sanchez, L. E. Applications of Texturization Techniques on Cutting Tools Surfaces—a Survey. Int. J. Adv. Manuf. Technol. 2020, 109(3–4), 1117–1135. DOI: https://doi.org/10.1007/s00170-020-05669-0.
- Cascón, I.; Sarasua, J. A.; Elkaseer, A. Tailored Chip Breaker Development for Polycrystalline Diamond Inserts: FEM-Based Design and Validation. Appl. Sci. 2019, 9(19), 4117. DOI: https://doi.org/10.3390/app9194117.
- Sivaiah, P.; Revantha Kumar, M. Bala Subramanyam, S.; Prasad, K. L. V. A Comparative Study on Different Textured and Untextured Tools Performance in Turning Process. Mater. Manuf. Process., 2021, 1–10. doi:https://doi.org/10.1080/10426914.2020.1866201.
- Li, Q.; Pan, C.; Jiao, Y.; Hu, K. Investigation on Cutting Performance of Micro-Textured Cutting Tools. Micromachines. 2019, 10(6). DOI: https://doi.org/10.3390/mi10060352.
- Pan, J.; Feng, K.; He, L.; Zhuang, K.; Ni, J.; Lv, J. Influence of Different Textures on Machining Performance of a Milling Tool. Adv. Mater. Sci. Eng. 2020, 2020. DOI: https://doi.org/10.1155/2020/1724241.
- Palanisamy, D.; Balasubramanian, K.; Manikandan, N.; Arulkirubakaran, D.; Ramesh, R. Machinability Analysis of High Strength Materials with Cryo-Treated Textured Tungsten Carbide Inserts. Mater. Manuf. Process. 2019, 34(5), 502–510. DOI: https://doi.org/10.1080/10426914.2019.1566612.
- Ling, T. D.; Liu, P.; Xiong, S.; Grzina, D.; Cao, J.; Wang, Q. J.; Xia, Z. C.; Talwar, R. Surface Texturing of Drill Bits for Adhesion Reduction and Tool Life Enhancement. Tribol. Lett. 2013, 52(1), 113–122. DOI: https://doi.org/10.1007/s11249-013-0198-7.
- Niketh, S.; Samuel, G. L. Surface Texturing for Tribology Enhancement and Its Application on Drill Tool for the Sustainable Machining of Titanium Alloy. J. Clean. Prod. 2017, 167, 253–270. DOI: https://doi.org/10.1016/j.jclepro.2017.08.178.
- Sivaiah, P.; Singh, M. M.; Venkatesu, S.; Yoganjaneyulu, G. Investigation on Turning Process Performance Using Hybrid-Textured Tools under Dry and Conventional Cooling Environment. Mater. Manuf. Process. 2020, 35(16), 1852–1859. DOI: https://doi.org/10.1080/10426914.2020.1813893.
- Sahu, S. K.; Ozdoganlar, O. B.; Devor, R. E.; Kapoor, S. G. Effect of Groove-Type Chip Breakers on Twist Drill Performance. Int. J. Mach. Tools Manuf. 2003, 43(December 2002), 617–627. DOI: https://doi.org/10.1016/S0890-6955(02)00303-6.
- Guo, D.; Guo, X.; Zhang, K.; Chen, Y.; Zhou, C.; Gai, L. Improving Cutting Performance of Carbide Twist Drill Combined Internal Cooling and Micro-Groove Textures in High-Speed Drilling Ti6Al4V. Int. J. Adv. Manuf. Technol. 2019, 100(1–4), 381–389. DOI: https://doi.org/10.1007/s00170-018-2733-z.
- Kubota, H.; Tabei, H. Drilling of a Small and Deep Hole Using a Twist Drill. Trans. Jpn. Soc. Mech. Eng. Ser. C. 1996, 62(601), 3691–3697. DOI:https://doi.org/10.1299/kikaic.62.3691.
- Kelly, J. F.; Cotterell, M. G. Minimal Lubrication Machining of Aluminium Alloys. J. Mater. Process. Technol. 2002, 120(1–3), 327–334. DOI: https://doi.org/10.1016/S0924-0136(01)01126-8.
- Jesudass Thomas, S.; Kalaichelvan, K. Comparative Study of the Effect of Surface Texturing on Cutting Tool in Dry Cutting. Mater. Manuf. Process. 2018, 33(6), 683–694. DOI: https://doi.org/10.1080/10426914.2017.1376070.
- Kumar, V. U.; Raj, D. S. Performance Analysis of Tools with Rake Face Textures Produced Using Wire-EDM in Turning AISI4340. Mater. Manuf. Process. 2021, 36(10), 1146–1160. DOI: https://doi.org/10.1080/10426914.2021.1905826.
- Arunkumar, N.; Thanikasalam, A.; Sankaranarayanan, V.; Senthilkumar, E. Parametric Optimization of Deep-Hole Drilling on AISI 1045 Steel and Online Tool Condition Monitoring Using an Accelerometer. Mater. Manuf. Process. 2018, 33(16), 1751–1764. DOI: https://doi.org/10.1080/10426914.2018.1476757.
- Ke, F.; Ni, J.; Stephenson, D. A. Continuous Chip Formation in Drilling. Int. J. Mach. Tools Manuf. 2005, 45(15), 1652–1658. DOI: https://doi.org/10.1016/j.ijmachtools.2005.03.011.