3D printing of complex-shaped polymer-derived ceramics with enhanced structural retention

References

• Eckel, Z. C.; Zhou, C.; Martin, J. H.; Jacobsen, A. J.; Carter, W. B.; Schaedler, T. A., et al. Additive Manufacturing of Polymer-derived Ceramics. Science. 2016, 351(6268), 58–62.
   PubMed Web of Science ®Google Scholar
• Zanchetta, E.; Cattaldo, M.; Franchin, G., et al. Stereolithography of SiOC Ceramic Microcomponents. Adv. Mater. 2016, 28(2), 370–376.
   PubMed Web of Science ®Google Scholar
• Chen, Z.; Li, Z.; Li, J., et al. 3D Printing of Ceramics: A Review. J. Eur. Ceram. Soc. 2019, 39(4), 661–687.
   Web of Science ®Google Scholar
• Uribe-Lam, E.; Treviño-Quintanilla, C. D.; Cuan-Urquizo, E., et al. Use of Additive Manufacturing for the Fabrication of Cellular and Lattice Materials: A Review. Mater. Manuf. Processes. 2021Feb17, 36(3), 257–280.
   Web of Science ®Google Scholar
• Lu, Z.; Cao, J.; Song, Z., et al. Research Progress of Ceramic Matrix Composite Parts Based on Additive Manufacturing Technology. Virtual Phys. Prototyp. 2019October02, 14(4), 333–348.
   Web of Science ®Google Scholar
• Chen, Z.; Li, D.; Zhou, W., et al. Curing Characteristics of Ceramic Stereolithography for an Aqueous-based Silica Suspension. Proc Int Mech Eng Part B J Eng Manuf. 2010, 224(4), 641–651.
   Google Scholar
• Chen, Z.; Li, D.; Zhou, W. Process Parameters Appraisal of Fabricating Ceramic Parts Based on Stereolithography Using the Taguchi Method. Proc Int Mech Eng Part B J Eng Manuf. 2012, 226(7), 1249–1258.
   Google Scholar
• Rasaki, S. A.; Xiong, D.; Xiong, S., et al. Photopolymerization-based Additive Manufacturing of Ceramics: A Systematic Review. J. Adv. Ceram. 2021June01, 10(3), 442–471.
   Web of Science ®Google Scholar
• Shuai, X.; Zeng, Y.; Li, P., et al. Fabrication of Fine and Complex Lattice Structure Al2O3 Ceramic by Digital Light Processing 3D Printing Technology. J. Mater. Sci. 2020June01, 55(16), 6771–6782.
   Web of Science ®Google Scholar
• Zhang, C.; Luo, Z.; Liu, C.; Zhu, J.; Cao, J.; Yuan, J.; Wang, P.; Liu, C.; Lao, C.; Chen, Z., et al. Dimensional Retention of Photocured Ceramic Units during 3D Printing and Sintering Processes. Ceramics International. 2021, 47(8), 11097–11108.
   Web of Science ®Google Scholar
• Petrovskaya, T. S.; Toropkov, N. E.; Mironov, E. G.; Azarmi, F., et al. 3D Printed Biocompatible Polylactide-hydroxyapatite Based Material for Bone Implants. Materials and Manufacturing Processes. 2018December10, 33(16), 1899–1904. DOI: 10.1080/10426914.2018.1476764
   Web of Science ®Google Scholar
• Compton, B. G.; Kemp, J. W.; Novikov, T. V.; Pack, R. C.; Nlebedim, C. I.; Duty, C. E.; Rios, O.; Paranthaman, M. P., et al. Direct-write 3D Printing of NdFeB Bonded Magnets. Materials and Manufacturing Processes. 2018January02, 33(1), 109–113. DOI: 10.1080/10426914.2016.1221097
   Web of Science ®Google Scholar
• Mamatha, S.; Biswas, P.; Ramavath, P., et al. Effect of Parameters on 3D Printing of Alumina Ceramics and Evaluation of Properties of Sintered Parts. J. Asian Ceram. Soc. 9(3), 2021, 858–864.
   Web of Science ®Google Scholar
• Chen, A.-N.; Wu, J.-M.; Liu, K.; Chen, J.-Y.; Xiao, H.; Chen, P.; Li, C.-H.; Shi, Y.-S., et al. High-performance Ceramic Parts with Complex Shape Prepared by Selective Laser Sintering: A Review. Advances in Applied Ceramics. 2018, 117(2), 100–117.
   Web of Science ®Google Scholar
• Deckers, J. P.; Shahzad, K.; Cardon, L.; Rombouts, M.; Vleugels, J.; Kruth, J.-P., et al. Shaping Ceramics through Indirect Selective Laser Sintering. Rapid Prototyping Journal. 2016, 22(3), 544–558.
   Web of Science ®Google Scholar
• Zhu, Z.; Gong, Z.; Qu, P.; Li, Z.; Rasaki, S. A.; Liu, Z.; Wang, P.; Liu, C.; Lao, C.; Chen, Z., et al. Additive Manufacturing of Thin Electrolyte Layers via Inkjet Printing of Highly-stable Ceramic Inks. Journal of Advanced Ceramics. 2021, 10(2), 279–290.
   Web of Science ®Google Scholar
• Chen, Z.; Ouyang, J.; Liang, W.; Yan, Z.-C.; Stadler, F.; Lao, C., et al. Development and Characterizations of Novel Aqueous-based LSCF Suspensions for Inkjet Printing. Ceramics International. 2018, 44(11), 13381–13388.
   Web of Science ®Google Scholar
• Qu, P.; Xiong, D.; Zhu, Z., et al. Inkjet Printing Additively Manufactured Multilayer SOFCs Using High Quality Ceramic Inks for Performance Enhancement. Addit. Manuf. 2021December01, 48, 102394.
   Web of Science ®Google Scholar
• Duan, W.; Yin, X.; Li, Q., et al. A Review of Absorption Properties in Silicon-based Polymer Derived Ceramics. J. Eur. Ceram. Soc. 2016November01, 36(15), 3681–3689.
   Web of Science ®Google Scholar
• Chollon, G.; Pailler, R.; Canet, R., et al. Correlation between Microstructure and Electrical Properties of SiC-based Fibres Derived from Organosilicon Precursors. J. Eur. Ceram. Soc. 1998January01, 18(6), 725–733.
   Web of Science ®Google Scholar
• Li, Z.; Chen, Z.; Liu, J., et al. Additive Manufacturing of Lightweight and High-strength Polymer-derived SiOC Ceramics. Virtual Phys. Prototyp. 2020, 15(2), 163–177.
   Web of Science ®Google Scholar
• Cao, J.; Idrees, M.; Tian, G., et al. Complex SiC-based Structures with High Specific Strength Fabricated by Vat Photopolymerization and One-step Pyrolysis. Addit. Manuf. 2021December01, 48, 102430.
   Web of Science ®Google Scholar
• Schulz, M. Polymer Derived Ceramics in MEMS/NEMS – A Review on Production Processes and Application. Adv. Appl. Ceram. November 01, 2009, 108(8), 454–460.
   Web of Science ®Google Scholar
• Sujith, R.; Jothi, S.; Zimmermann, A., et al. Mechanical Behaviour of Polymer Derived Ceramics – A Review. Int. Mater. Rev. 2021August18, 66(6), 426–449.
   Web of Science ®Google Scholar
• Xu, X.; Li, P.; Ge, C., et al. 3D Printing of Complex-type SiOC Ceramics Derived from Liquid Photosensitive Resin. ChemistrySelect. 2019, 4(23), 6862–6869.
   Web of Science ®Google Scholar
• Colombo, P.; Schmidt, J.; Franchin, G., et al. Additive Manufacturing Techniques for Fabricating Complex Ceramic Components from Preceramic Polymers. Am. Ceram. Soc. Bull. 2017, 96, 16–23.
   Web of Science ®Google Scholar
• Colombo, P.; Bernardo, E.; Parcianello, G. Multifunctional Advanced Ceramics from Preceramic Polymers and Nano-sized Active Fillers. J. Eur. Ceram. Soc. 2013, 33(3), 453–469.
   Web of Science ®Google Scholar
• Hundley, J. M.; Eckel, Z. C.; Schueller, E., et al. Geometric Characterization of Additively Manufactured Polymer Derived Ceramics. Addit. Manuf. 2017December01, 18, 95–102.
   Web of Science ®Google Scholar
• Fu, Y.; Chen, Z.; Xu, G., et al. Preparation and Stereolithography 3D Printing of Ultralight and Ultrastrong ZrOC Porous Ceramics. J. Alloys Compd. 2019, 789, 867–873.
   Web of Science ®Google Scholar
• Fu, Y.; Xu, G.; Chen, Z., et al. Multiple Metals Doped Polymer-derived SiOC Ceramics for 3D Printing. Ceram. Int. 2018July01, 44(10), 11030–11038.
   Web of Science ®Google Scholar
• Schmidt, J.; Colombo, P. Digital Light Processing of Ceramic Components from Polysiloxanes. J. Eur. Ceram. Soc. 2018, 38(1), 57–66.
   Web of Science ®Google Scholar
• Zhuang, K.; Lin, S.; Huang, W., et al. Realizing High Ceramic Yield and Low Shrinkage of In-situ Formed Lightweight 3D-SiC(rGO)px Polymer-derived Ceramics with Excellent Fracture Toughness. Ceram. Int. 2020December01, 46(17), 27426–27436.
   Web of Science ®Google Scholar
• Brinckmann, S. A.; Patra, N.; Yao, J., et al. Stereolithography of SiOC Polymer-Derived Ceramics Filled with SiC Micronwhiskers. Adv. Eng. Mater. 2018, 20(11), 1800593.
   Web of Science ®Google Scholar
• de Hazan, Y.; Penner, D. SiC and SiOC Ceramic Articles Produced by Stereolithography of Acrylate Modified Polycarbosilane Systems. J. Eur. Ceram. Soc. December 01 2017, 37(16), 5205–5212.
   Web of Science ®Google Scholar
• Liu, J.; Xu, X.; Liu, D., et al. Ultrafast Formation of Al2O3–Y3Al5O12 Eutectic Ceramic by Flash Sintering. J. Am. Ceram. Soc. 2020 August01, 103(8), 4051–4056.
   Web of Science ®Google Scholar
• He, C.; Ma, C.; Li, X., et al. Polymer-derived SiOC Ceramic Lattice with Thick Struts Prepared by Digital Light Processing. Addit. Manuf. 2020October01, 35, 101366.
   Web of Science ®Google Scholar
• Wang, C.; Ping, W.; Bai, Q., et al. A General Method to Synthesize and Sinter Bulk Ceramics in Seconds. Science. 2020, 368(6490), 521.
   PubMed Web of Science ®Google Scholar
• Abdollahi, S.; Paryab, A.; Rahmani, S., et al. Synthesis of SiOC/Al2O3 Nano/macro Composites through PDC Method; Investigation of Potentials as Layers of a Packed Bed Reactor Membrane. Ceram. Int. 2020July01, 46(11, Part B), 19000–19007.
   Web of Science ®Google Scholar
• Ma, C.; He, C.; Wang, W., et al. Metal-doped Polymer-derived SiOC Composites with Inorganic Metal Salt as the Metal Source by Digital Light Processing 3D Printing. Virtual Phys. Prototyp. 2020July02, 15(3), 294–306.
   Web of Science ®Google Scholar
• Elsayed, H.; Sinico, M.; Secco, M., et al. B-doped Hardystonite Bioceramics from Preceramic Polymers and Fillers: Synthesis and Application to Foams and 3D-printed Scaffolds. J. Eur. Ceram. Soc. 2017April01, 37(4), 1757–1767.
   Web of Science ®Google Scholar
• Li, S.; Duan, W.; Zhao, T., et al. The Fabrication of SiBCN Ceramic Components from Preceramic Polymers by Digital Light Processing (DLP) 3D Printing Technology. J. Eur. Ceram. Soc. 2018, 38(14), 4597–4603.
   Web of Science ®Google Scholar
• Xiong, H.; Chen, H.; Zhao, L., et al. SiCw/SiCp Reinforced 3D-SiC Ceramics Using Direct Ink Writing of Polycarbosilane-based Solution: Microstructure, Composition and Mechanical Properties. J. Eur. Ceram. Soc. 2019July01, 39(8), 2648–2657.
   Web of Science ®Google Scholar