References
- van Dang, L.; Makhanov, S. Enhanced Vector Flow of Significant Directions for Five-Axis Machining of STL Surfaces. Int. J. Prod. Res. 2021, 59(12), 3664–3695. DOI: https://doi.org/10.1080/00207543.2020.1749325.
- Yu, W.; Nie, Z.; Lin, Y. Research on the Slicing Method with Equal Thickness and Low Redundancy Based on STL Files. J. Chin. Inst. Eng. 2021, 44(5), 469–477. DOI: https://doi.org/10.1080/02533839.2021.1919563.
- Gardan, J. Additive Manufacturing Technologies: State of the Art and Trends. Int. J. Prod. Res. 2016, 54(10), 3118–3132. DOI: https://doi.org/10.1080/00207543.2015.1115909.
- Saengchairat, N.; Tran, T.; Chua, C.-K. A Review: Additive Manufacturing for Active Electronic Components. Virtual Phys. Prototyp. 2017, 12(1), 31–46. DOI: https://doi.org/10.1080/17452759.2016.1253181.
- Tamburrino, F.; Barone, S.; Paoli, A.; Razionale, A. V. Post-Processing Treatments to Enhance Additively Manufactured Polymeric Parts: A Review. Virtual Phys. Prototyp. 2021, 16(2), 218–251. DOI: https://doi.org/10.1080/17452759.2021.1917039.
- Lavecchia, F.; Percoco, G.; Pei, E.; Galantucci, L. M. Computer Numerical Controlled Grinding and Physical Vapor Deposition for Fused Deposition Modelled Workpieces. Adv. Mater. Sci. Eng. 2018, 2018, 1–7. DOI: https://doi.org/10.1155/2018/9037490.
- Kechagias, J.; Maropoulos, S.; Karagiannis, S. Process Build‐time Estimator Algorithm for Laminated Object Manufacturing. Rapid Prototyp. J. 2004, 10(5), 297–304. DOI: https://doi.org/10.1108/13552540410562331.
- Reymus, M.; Liebermann, A.; Diegritz, C.; Keßler, A. Development and Evaluation of an Interdisciplinary Teaching Model via 3D Printing. Clin. Exp. Dent. 2021, 7(1), 3–10. DOI: https://doi.org/10.1002/cre2.334.
- Onuh, S. O.; Yusuf, Y. Y. Rapid Prototyping Technology: Applications and Benefits for Rapid Product Development. J. Intell. Manuf. 1999, 10(3/4), 301–311. DOI: https://doi.org/10.1023/A:1008956126775.
- Hofmann, M. 3D Printing Gets a Boost and Opportunities with Polymer Materials. ACS Macro Lett. 2014, 3(4), 382–386. DOI: https://doi.org/10.1021/mz4006556.
- Baumann, F.; Bugdayci, H.; Grunert, J.; Keller, F.; Roller, D. Influence of Slicing Tools on Quality of 3D Printed Parts. Comput. Aided Des. Appl. 2016, 13(1), 14–31. DOI: https://doi.org/10.1080/16864360.2015.1059184.
- Kim, G. D.; Oh, Y. T. A Benchmark Study on Rapid Prototyping Processes and Machines: Quantitative Comparisons of Mechanical Properties, Accuracy, Roughness, Speed, and Material Cost. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2008, 222(2), 201–215. DOI: https://doi.org/10.1243/09544054JEM724.
- Kitsakis, K.; Aslani, K. E.; Vaxevanidis, N.; Kechagias, J. An Internal Combustion Engine Visualization Physical Prototype Applying Digital Manufacturing. IOP Conf. Ser. Mater. Sci. Eng. 2019, 564(1), 012022. DOI: https://doi.org/10.1088/1757-899X/564/1/012022.
- Kechagias, J.; Kitsakis, K.; Zacharias, A.; Theocharis, K.; Aslani, K.-E.; Petousis, M.; Fountas, N. A.; Vaxevadnidis, N. M. Direct 3D Printing of a Hand Splint Using Reverse Engineering. IOP Conf. Ser. Mater. Sci. Eng. 2021, 1037(1), 012019. DOI: https://doi.org/10.1088/1757-899X/1037/1/012019.
- Kirby, B.; Kenkel, J. M.; Zhang, A. Y.; Amirlak, B.; Suszynski, T. M. T.-D. (3D) Synthetic Printing for the Manufacture of Non-Biodegradable Models, Tools and Implants Used in Surgery: A Review of Current Methods. J. Med. Eng. 2021, 45(1), 14–21. DOI: https://doi.org/10.1080/03091902.2020.1838643.
- Chua, C. K.; Leong, K. F.; Lim, C. S. Rapid Prototyping; World Scientific: Singapore, 2010. DOi: https://doi.org/10.1142/6665.
- Debnath, S. K.; Debnath, M.; Srivastava, R.; Omri, A. Intervention of 3D Printing in Health Care: Transformation for Sustainable Development. Expert Opin. Drug. Deliv. 2021, 18(11), 1659–1672. DOI: https://doi.org/10.1080/17425247.2021.1981287.
- Yap, Y. L.; Yeong, W. Y. Additive Manufacture of Fashion and Jewellery Products: A Mini Review. Virtual Phys. Prototyp. 2014, 9(3), 195–201. DOI: https://doi.org/10.1080/17452759.2014.938993.
- Muhammad, M. S.; Kerbache, L.; Elomri, A. Potential of Additive Manufacturing for Upstream Automotive Supply Chains. Supply Chain Forum. 2021, 1–19. DOI: https://doi.org/10.1080/16258312.2021.1973872.
- Khoo, Z. X.; Teoh, J. E. M.; Liu, Y.; Chua, C. K.; Yang, S.; An, J.; Leong, K. F.; Yeong, W. Y. 3D Printing of Smart Materials: A Review on Recent Progresses in 4D Printing. Virtual Phys. Prototyp. 2015, 10(3), 103–122. DOI: https://doi.org/10.1080/17452759.2015.1097054.
- Tsiolikas, A.; Mikrou, T.; Vakouftsi, F.; Aslani, K. E.; Kechagias, J. Robust Design Application for Optimizing ABS Fused Filament Fabrication Process: A Case Study. IOP Conf. Ser. Mater. Sci. Eng. 2019, 564. DOI: https://doi.org/10.1088/1757-899X/564/1/012021.
- Aslani, K.-E.; Kitsakis, K.; Kechagias, J. D.; Vaxevanidis, N. M.; Manolakos, D. E. On the Application of Grey Taguchi Method for Benchmarking the Dimensional accuracy of the PLA Fused Filament Fabrication Process. SN Appl. Sci. 2020, 2(6). DOI: https://doi.org/10.1007/s42452-020-2823-z.
- Bhardwaj, T.; Jain, P.; Singh, D. Experimental Study on Dimensional Accuracy of Freeform Fabricated Thermoplastic Polyurethane. IOP Conf. Ser. Mater. Sci. Eng. 2021, 1136(1), 012060. DOI: https://doi.org/10.1088/1757-899X/1136/1/012060.
- Zharylkassyn, B.; Perveen, A.; Talamona, D. Effect of Process Parameters and Materials on the Dimensional Accuracy of FDM Parts; Mater. Proc: Today, 2021. Vol. 44. 1307–1311. https://doi.org/10.1016/J.MATPR.2020.11.332.
- Khunt, C. P.; Makhesana, M. A.; Mawandiya, B. K.; Patel, K. M. Investigations on the Influence of Printing Parameters during Processing of Biocompatible Polymer in Fused Deposition Modelling (FDM). Adv. Mater. Process. Technol. 2021, 1–17. DOI: https://doi.org/10.1080/2374068X.2021.1927651.
- Rahim, T. N. A. T.; Abdullah, A. M.; Md Akil, H. Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites. Polym. Rev. 2019, 59(4), 589–624. DOI: https://doi.org/10.1080/15583724.2019.1597883.
- Vinoth Babu, N.; Venkateshwaran, N.; Rajini, N.; Ismail, S. O.; Mohammad, F.; Al-Lohedan, H. A.; Siengchin, S. Influence of Slicing Parameters on Surface Quality and Mechanical Properties of 3D-Printed CF/PLA Composites Fabricated by FDM Technique. Mater. Technol. 2021, 1–18. DOI: https://doi.org/10.1080/10667857.2021.1915056.
- Armillotta, A. Assessment of Surface Quality on Textured FDM Prototypes. Rapid Prototyp. J. 2006, 12(1), 35–41. DOI: https://doi.org/10.1108/13552540610637255.
- Bodaghi, M.; Mobin, M.; Ban, D.; Lomov, S. V.; Nikzad, M. Surface Quality of Printed Porous Materials for Permeability Rig Calibration. Mater. Manuf. Process. 2021, 1–11. DOI: https://doi.org/10.1080/10426914.2021.1960994.
- Anitha, R.; Arunachalam, S.; Radhakrishnan, P. Critical Parameters Influencing the Quality of Prototypes in Fused Deposition Modelling. J. Mater. Process. Technol. 2001, 118(1–3), 385–388. DOI: https://doi.org/10.1016/S0924-0136(01)00980-3.
- Sun, Q.; Rizvi, G. M.; Bellehumeur, C. T.; Gu, P. Effect of Processing Conditions on the Bonding Quality of FDM Polymer Filaments. Rapid Prototyp. J. 2008, 14(2), 72–80. DOI: https://doi.org/10.1108/13552540810862028.
- Radhwan, H.; Shayfull, Z.; Nasir, S. M.; Abdellah, A. E.-H.; Irfan, A. R. Optimization Parameter Effects on the Quality Surface Finish of 3D-Printing Process Using Taguchi Method. IOP Conf. Ser. Mater. Sci. Eng. 2020, 864(1), 012143. DOI: https://doi.org/10.1088/1757-899X/864/1/012143.
- Chaidas, D.; Kechagias, J. D. An Investigation of PLA/W Parts Quality Fabricated by FFF. Mater. Manuf. Process. 2021, 1–9. DOI: https://doi.org/10.1080/10426914.2021.1944193.
- Palanisamy, C.; Raman, R.; Dhanraj, P. Additive Manufacturing: A Review on Mechanical Properties of Polyjet and FDM Printed Parts. Polym. Bull. 2021. DOI: https://doi.org/10.1007/s00289-021-03899-0.
- Bhagia, S.; Bornani, K.; Agrawal, R.; Satlewal, A.; Ďurkovič, J.; Lagaňa, R.; Bhagia, M.; Yoo, C. G.; Zhao, X.; Kunc, V., et al. Critical Review of FDM 3D Printing of PLA Biocomposites Filled with Biomass Resources, Characterization, Biodegradability, Upcycling and Opportunities for Biorefineries. Appl. Mater. Today. 2021, 24. DOI: https://doi.org/10.1016/j.apmt.2021.101078.
- Aida, H. J.; Nadlene, R.; Mastura, M. T.; Yusriah, L.; Sivakumar, D.; Ilyas, R. A. Natural Fibre Filament for Fused Deposition Modelling (FDM): A Review. Int. J. Sustainable Eng. 2021, 14(6), 1988–2008. DOI: https://doi.org/10.1080/19397038.2021.1962426.
- Ahmadifar, M.; Benfriha, K.; Shirinbayan, M.; Tcharkhtchi, A. Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): A Review. Appl. Compos. Mater. 2021, 28(5), 5. DOI: https://doi.org/10.1007/s10443-021-09933-8.
- Pervaiz, S.; Qureshi, T. A.; Kashwani, G.; Kannan, S. 3D Printing of Fiber-Reinforced Plastic Composites Using Fused Deposition Modeling: A Status Review. Materials. 2021, 14(16), 4520. DOI: https://doi.org/10.3390/ma14164520.
- Ferreira, I.; Machado, M.; Alves, F.; Torres Marques, A. A Review on Fibre Reinforced Composite Printing via FFF. Rapid Prototyp. J. 2019, 25(6), 972–988. DOI: https://doi.org/10.1108/RPJ-01-2019-0004.
- Cuan-Urquizo, E.; Barocio, E.; Tejada-Ortigoza, V.; Pipes, R.; Rodriguez, C.; Roman-Flores, A. Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches. Materials. 2019, 12(6), 895. DOI: https://doi.org/10.3390/ma12060895.
- Al-Maharma, A. Y.; Patil, S. P.; Markert, B. Effects of Porosity on the Mechanical Properties of Additively Manufactured Components: A Critical Review. Mater. Res. Express. 2020, 7(12), 122001. DOI: https://doi.org/10.1088/2053-1591/abcc5d.
- Rashid, A. A.; Koç, M. Fused Filament Fabrication Process: A Review of Numerical Simulation Techniques. Polymers. 2021, 13(20), 3534. DOI: https://doi.org/10.3390/polym13203534.
- Ahmadifar, M.; Benfriha, K.; Shirinbayan, M.; Tcharkhtchi, A. Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): A Review. Appl. Compos. Mater. 2021, 28(5), 1335–1380. DOI: https://doi.org/10.1007/S10443-021-09933-8/TABLES/10.
- Kehinde Aworinde, A.; Oluropo Adeosun, S.; Adekunle Oyawale, F.; Titilayo Akinlabi, E.; Akinlabi, S. A. Parametric Effects of Fused Deposition Modelling on the Mechanical Properties of Polylactide Composites: A Review. J. Phys. Conf. Ser. 2019, 1378(2), 022060. DOI: https://doi.org/10.1088/1742-6596/1378/2/022060.
- Peterkin, F. E.; Stevens, J. L.; Sharrow, J. F.; Pitman, R. K. High Voltage Breakdown Strength of Rapid Prototype Materials. In 14th IEEE Int. Pulsed Power Conf.; IEEE: Dallas, TX, USA, 2003; pp 1025–1028. https://doi.org/10.1109/PPC.2003.1277986.
- Bermudez, D.; Quiñonez, P. A.; Vasquez, E. J.; Carrete, I. A.; Word, T. J.; Roberson, D. A. A Comparison of the Physical Properties of Two Commercial 3D Printing PLA Grades. Virtual Phys. Prototyp. 2021, 16(2), 178–195. DOI: https://doi.org/10.1080/17452759.2021.1910047.
- Pérez, C. J. L. Analysis of the Surface Roughness and Dimensional Accuracy Capability of Fused Deposition Modelling Processes. Int. J. Prod. Res. 2002, 40(12), 2865–2881. DOI: https://doi.org/10.1080/00207540210146099.
- Singh, R.; Kumar, R.; Singh, M.; Preet, P. O. F. Wear and Morphological Properties of 3D Printed Almond Skin Powder Reinforced PLA Matrix. Adv. Mater. Process. Technol. 2021, 1–25. DOI: https://doi.org/10.1080/2374068X.2021.1970992.
- Turner, B. N.; Gold, S. A. A Review of Melt Extrusion Additive Manufacturing Processes: II. Materials, Dimensional Accuracy, and Surface Roughness. Rapid Prototyp. J. 2015, 21(3), 250–261. DOI: https://doi.org/10.1108/RPJ-02-2013-0017.
- Decker, N.; Yee, A. A Simplified Benchmarking Model for the Assessment of Dimensional Accuracy in FDM Processes. Int. J. Rapid Manuf. 2015, 5(2), 145. DOI: https://doi.org/10.1504/IJRAPIDM.2015.073573.
- Park, S.; Fu, K. (Kelvin) Polymer-Based Filament Feedstock for Additive Manufacturing. Compos. Sci. Technol. 2021, 213. DOI: https://doi.org/10.1016/j.compscitech.2021.108876.
- Dey, A.; Roan Eagle, I. N.; Yodo, N. A Review on Filament Materials for Fused Filament Fabrication. J. Manuf. Mater. Process. 2021, 5, 3. DOI: https://doi.org/10.3390/jmmp5030069.
- Pricci, A.; de Tullio, M. D.; Percoco, G. Analytical and Numerical Models of Thermoplastics: A Review Aimed to Pellet Extrusion-Based Additive Manufacturing. Polymers. 2021, 13(18), 18. DOI: https://doi.org/10.3390/polym13183160.
- Vaes, D.; van Puyvelde, P. Semi-Crystalline Feedstock for Filament-Based 3D Printing of Polymers. Prog. Polym. Sci. 2021, 118. DOI: https://doi.org/10.1016/j.progpolymsci.2021.101411.
- Mohamed, O. A.; Masood, S. H.; Bhowmik, J. L. Experimental Investigations of Process Parameters Influence on Rheological Behavior and Dynamic Mechanical Properties of FDM Manufactured Parts. Mater. Manuf. Process. 2016, 31(15), 1983–1994. DOI: https://doi.org/10.1080/10426914.2015.1127955.
- Mosleh, N.; Rezadoust, A. M.; Dariushi, S. Determining Process-Window for Manufacturing of Continuous Carbon Fiber-Reinforced Composite Using 3D-Printing. Mater. Manuf. Process. 2021, 36(4), 409–418. DOI: https://doi.org/10.1080/10426914.2020.1843664.
- Parvanda, R.; Kala, P.; Sharma, V. Bibliometric Analysis-Based Review of Fused Deposition Modeling 3D Printing Method (1994–2020). 3D Print. Addit. Manuf. 2021. DOI: https://doi.org/10.1089/3dp.2021.0046.
- Phadke, M. S. Quality Engineering Using Robust Design; Englewood Cliffs, New Jersey 07632: Prentice Hall PTR, 1989. PTR Prentice Hall
- Al-Ghamdi, K. A. Sustainable FDM Additive Manufacturing of ABS Components with Emphasis on Energy Minimized and Time Efficient Lightweight Construction. Int. J. Lightweight Mater. Manuf. 2019, 2(4), 338–345. DOI: https://doi.org/10.1016/j.ijlmm.2019.05.004.
- Gul, J. Z.; Sajid, M.; Rehman, M. M.; Siddiqui, G. U.; Shah, I.; Kim, K.-H.; Lee, J.-W.; Choi, K. H. 3D Printing for Soft Robotics – A Review. Sci. Technol. Adv. Mater. 2018, 19(1), 243–262. DOI: https://doi.org/10.1080/14686996.2018.1431862.
- Compton, B. G.; Kemp, J. W.; Novikov, T. V.; Pack, R. C.; Nlebedim, C. I.; Duty, C. E.; Rios, O.; Paranthaman, M. P. Direct-Write 3D Printing of NdFeB Bonded Magnets. Mater. Manuf. Process. 2018, 33(1), 109–113. DOI: https://doi.org/10.1080/10426914.2016.1221097.
- Baumann, F. W.; Wellekötter, J.; Roller, D.; Bonten, C. Software-Aided Measurement of Geometrical Fidelity for 3D Printed Objects. Comput. Aided Des. Appl. 2017, 14(4), 486–497. DOI: https://doi.org/10.1080/16864360.2016.1257190.
- Roth, G. A.; Geraci, C. L.; Stefaniak, A.; Murashov, V.; Howard, J. Potential Occupational Hazards of Additive Manufacturing. J. Occup. Environ. Hyg . 2019, 16(5), 321–328. DOI: https://doi.org/10.1080/15459624.2019.1591627.
- Väisänen, A. J. K.; Hyttinen, M.; Ylönen, S.; Alonen, L. Occupational Exposure to Gaseous and Particulate Contaminants Originating from Additive Manufacturing of Liquid, Powdered, and Filament Plastic Materials and Related Post-Processes. J. Occup. Environ. Hyg . 2019, 16(3), 258–271. DOI: https://doi.org/10.1080/15459624.2018.1557784.
- Lee, A. Y.; Zhou, A.; An, J.; Chua, C. K.; Zhang, Y. Contactless Reversible 4D-Printing for 3D-to-3D Shape Morphing. Virtual Phys. Prototyp. 2020, 15(4), 481–495. DOI: https://doi.org/10.1080/17452759.2020.1822189.
- Urbanic, R. J. From Thought to Thing: Using the Fused Deposition Modeling and 3D Printing Processes for Undergraduate Design Projects. Comput. Aided Des. Appl. 2016, 13(6), 768–785. DOI: https://doi.org/10.1080/16864360.2016.1168219.
- Pereira, T.; Scaffaro, R.; Nieh, S.; Arias, J.; Guo, Z.; Hahn, H. T. The Performance of Thin-Film Li-Ion Batteries under Flexural Deflection. J. Micromech. Microeng. 2006, 16(12), 2714. DOI: https://doi.org/10.1088/0960-1317/16/12/026.
- Chu, C.; Graf, G.; Rosen, D. W. Design for Additive Manufacturing of Cellular Structures. Comput. Aided Des. Appl. 2008, 5(5), 686–696. DOI: https://doi.org/10.3722/cadaps.2008.686-696.
- Gohari, H.; Kishawy, H.; Barari, A. Adaptive Variable Layer Thickness and Perimetral Offset Planning for Layer-Based Additive Manufacturing Processes. Int. J. Comput. Integr. Manuf. 2021, 34(9), 964–974. DOI: https://doi.org/10.1080/0951192X.2021.1946854.
- Kechagias, J. An Experimental Investigation of the Surface Roughness of Parts Produced by LOM Process. Rapid Prototyp. J. 2007, 13(1), 17–22. DOI: https://doi.org/10.1108/13552540710719172.
- Hedrick, R. W.; Urbanic, R. J. Integration of Additive Manufacturing and Virtual Verification Strategies within a Commercial CAM System. Comput. Aided Des. Appl. 2013, 10(4), 567–583. DOI: https://doi.org/10.3722/cadaps.2013.567-583.
- Ruffo, M.; Tuck, C.; Hague, R. Empirical Laser Sintering Time Estimator for Duraform PA. Int. J. Prod. Res. 2006, 44(23), 5131–5146. DOI: https://doi.org/10.1080/00207540600622522.
- Di Angelo, L.; Di Stefano, P. Parametric Cost Analysis for Web-Based e-Commerce of Layer Manufactured Objects. Int. J. Prod. Res. 2010, 48(7), 2127–2140. DOI: https://doi.org/10.1080/00207540802183653.
- Cheng, W.; Fuh, J. Y. H.; Nee, A. Y. C.; Wong, Y. S.; Loh, H. T.; Miyazawa, T. Multi‐objective Optimization of Part‐ Building Orientation in Stereolithography. Rapid Prototyp. J. 1995, 1(4), 12–23. DOI: https://doi.org/10.1108/13552549510104429.
- Frank, D.; Fadel, G. Expert System-Based Selection of the Preferred Direction of Build for Rapid Prototyping Processes. J. Intell. Manuf. 1995, 6(5), 339–345. DOI: https://doi.org/10.1007/BF00124677.
- Zhang, Y.; Bernard, A.; Harik, R.; Karunakaran, K. P. Build Orientation Optimization for Multi-Part Production in Additive Manufacturing. J. Intell. Manuf. 2017, 28(6), 1393–1407. DOI: https://doi.org/10.1007/S10845-015-1057-1.
- Fernández, E.; Ayas, C.; Langelaar, M.; Duysinx, P. Topology Optimisation for Large-Scale Additive Manufacturing: Generating Designs Tailored to the Deposition Nozzle Size. Virtual Phys. Prototyp. 2021, 16(2), 196–220. DOI: https://doi.org/10.1080/17452759.2021.1914893.
- Bochnia, J.; Blasiak, M.; Kozior, T. A Comparative Study of the Mechanical Properties of FDM 3D Prints Made of PLA and Carbon Fiber-Reinforced PLA for Thin-Walled Applications. Materials. 2021, 14(22), 7062. DOI: https://doi.org/10.3390/ma14227062.
- Kechagias, J.; Anagnostopoulos, V.; Zervos, S.; Chryssolouris, G. Estimation of Build Times in Rapid Prototyping Processes. In 6th Eur. Conf. Rapid Prot. Manuf; Dickens, P. M., Ed.; University of Nottingham: Nottingham, 1997; pp 137–148.
- Alam, F.; Elsherif, M.; AlQattan, B.; Ali, M.; Ahmed, I. M. G.; Salih, A.; Antonysamy, D. S.; Yetisen, A. K.; Park, S.; Butt, H. Prospects for Additive Manufacturing in Contact Lens Devices. Adv. Eng. Mater. 2021, 23(1), 2000941. DOI: https://doi.org/10.1002/adem.202000941.
- Chryssolouris, G.; Kechagias, J. D.; Kotselis, J. L.; Mourtzis, D. A.; Zannis, S. G. Surface Roughness Modelling of the Helisys Laminated Object Manufacturing (LOM) Process. In 8th Eur. Conf. Rapid Prot. Manuf.; Dickens, P. M., Ed.; Manuf.; University of Nottingham: Nottingham, 1999; pp 141–152.
- Mohamed, O. A.; Masood, S. H.; Bhowmik, J. L. M. Analysis, and Optimization of Dimensional Accuracy of FDM-Fabricated Parts Using Definitive Screening Design and Deep Learning Feedforward Artificial Neural Network. Adv. Manuf. 2021, 9(1), 115–129. DOI: https://doi.org/10.1007/S40436-020-00336-9.
- Dey, A.; Yodo, N. A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics. J. Manuf. Mater. Process. 2019, 3(3), 64. DOI: https://doi.org/10.3390/jmmp3030064.
- Kristiawan, R. B.; Imaduddin, F.; Ariawan, D.; Ubaidillah,; Arifin, Z. A Review on the Fused Deposition Modeling (FDM) 3D Printing: Filament Processing, Materials, and Printing Parameters. Open Eng. 2021, 11(1), 639–649. DOI: https://doi.org/10.1515/eng-2021-0063.
- Kabir, S. M. F.; Mathur, K.; Seyam, A.-F. M. Impact Resistance and Failure Mechanism of 3D Printed Continuous Fiber-Reinforced Cellular Composites. J. Text. Inst. 2021, 112(5), 752–766. DOI: https://doi.org/10.1080/00405000.2020.1778223.
- Skawiński, I.; Goetzendorf-Grabowski, T. FDM 3D Printing Method Utility Assessment in Small RC Aircraft Design. Aircr. Eng. Aerosp. Technol. 2019, 91(6), 865–872. DOI: https://doi.org/10.1108/AEAT-07-2018-0189.
- Singh, R.; Verma, M. Investigations for Deducing Wall Thickness of Aluminium Shell Casting Using Three Dimensional Printing Analysis and Modelling. J. Achiev. Mater. Manuf. 2008, 31(2), 565–569.
- Yu, H.; Huang, J.; Zou, B.; Shao, W.; Liu, J. Stress-Constrained Shell-Lattice Infill Structural Optimisation for Additive Manufacturing. Virtual Phys. Prototyp. 2020, 15(1), 35–48. DOI: https://doi.org/10.1080/17452759.2019.1647488.
- Harpool, T. D.; Alarifi, I. M.; Alshammari, B. A.; Aabid, A.; Baig, M.; Malik, R. A.; Mohamed Sayed, A.; Asmatulu, R.; EL-Bagory, T. M. A. A. Evaluation of the Infill Design on the Tensile Response of 3D Printed Polylactic Acid Polymer. Materials. 2021, 14(9), 2195. DOI: https://doi.org/10.3390/ma14092195.
- Nukala, P. K.; Palekar, S.; Patki, M.; Patel, K. Abuse Deterrent Immediate Release Egg-Shaped Tablet (Egglets) Using 3D Printing Technology: Quality by Design to Optimize Drug Release and Extraction. AAPS PharmSciTech. 2019, 20(2), 1–12. DOI: https://doi.org/10.1208/S12249-019-1298-Y.
- Cho, E. E.; Hein, H. H.; Lynn, Z.; Hla, S. J.; Tran, T. Investigation on Influence of Infill Pattern and Layer Thickness on Mechanical Strength of PLA Material in 3D Printing Technology. J. Eng. Sci. Res. 2019, 3(2), 27–37.
- Vassilakos, A.; Giannatsis, J.; Dedoussis, V. Fabrication of Parts with Heterogeneous Structure Using Material Extrusion Additive Manufacturing. Virtual Phys. Prototyp. 2021, 16(3), 267–290. DOI: https://doi.org/10.1080/17452759.2021.1919154.
- Es-Said, O. S.; Foyos, J.; Noorani, R.; Mendelson, M.; Marloth, R.; Pregger, B. A. Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples. Mater. Manuf. Process. 2000, 15(1), 107–122. DOI: https://doi.org/10.1080/10426910008912976.
- Fountas, N. A.; Papantoniou, I.; Kechagias, J. D.; Manolakos, D. E.; Vaxevanidis, N. M. Experimental Investigation on Flexural Properties of FDM-Processed PET-G Specimen Using Response Surface Methodology; MATEC Web Conf.: France, 2021; Vol. 349. 01008. DOI:https://doi.org/10.1051/matecconf/202134901008.
- Kechagias, J. D.; Vidakis, N.; Petousis, M. Parameter Effects and Process Modeling of FFF-TPU Mechanical Response. Mater. Manuf. Process. 2021, 1–11. DOI: https://doi.org/10.1080/10426914.2021.2001523.
- Das, P.; Mhapsekar, K.; Chowdhury, S.; Samant, R.; Anand, S. Selection of Build Orientation for Optimal Support Structures and Minimum Part Errors in Additive Manufacturing. Comput. Aided Des. Appl. 2017, 14(sup1), 1–13. DOI: https://doi.org/10.1080/16864360.2017.1308074.
- Rubies, E.; Palacín, J. Design and FDM/FFF Implementation of a Compact Omnidirectional Wheel for a Mobile Robot and Assessment of ABS and PLA Printing Materials. Robotics. 2020, 9(2), 43. DOI: https://doi.org/10.3390/robotics9020043.
- Xu, B.; Han, Y.; Zhao, L.; Xie, Y. M. Topological Optimization of Continuum Structures for Additive Manufacturing considering Thin Feature and Support Structure Constraints. Eng. Optim. 2021, 53(12), 2122–2143. DOI: https://doi.org/10.1080/0305215X.2020.1849170.
- Torres, J.; Cotelo, J.; Karl, J.; Gordon, A. P. Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives. JOM. 2015, 67(5), 1183–1193. DOI: https://doi.org/10.1007/s11837-015-1367-y.
- Zaman, U. K. U.; Boesch, E.; Siadat, A.; Rivette, M.; Baqai, A. A. Impact of Fused Deposition Modeling (FDM) Process Parameters on Strength of Built Parts Using Taguchi’s Design of Experiments. Int. J. Adv. Manuf. Syst. 2019, 101(5–8), 1215–1226. DOI: https://doi.org/10.1007/s00170-018-3014-6.
- Chen, D.; Xu, X.-Y.; Li, R.; Zang, G.-A.; Zhang, Y.; Wang, M.-R.; Xiong, M.-F.; Xu, J.-R.; Wang, T. Preparation and in Vitro Evaluation of FDM 3D-Printed Ellipsoid-Shaped Gastric Floating Tablets with Low Infill Percentages. AAPS PharmSciTech. 2019, 21(1), 1–13. DOI: https://doi.org/10.1208/S12249-019-1521-X.
- Qureshi, A. J.; Mahmood, S.; Wong, W. L. E.; Talamona, D. Design for Scalability and Strength Optimisation for Components Created through FDM Process. In 20th Int. Conf. On Engineering Design (ICED 15); Newcastle University; ICED: Milan, 2015; pp 255–266.
- Geng, P.; Zhao, J.; Wu, W.; Ye, W.; Wang, Y.; Wang, S.; Zhang, S. Effects of Extrusion Speed and Printing Speed on the 3D Printing Stability of Extruded PEEK Filament. J. Manuf. Process. 2019, 37, 266–273. DOI: https://doi.org/10.1016/j.jmapro.2018.11.023.
- El Magri, A.; El Mabrouk, K.; Vaudreuil, S.; Ebn Touhami, M. Experimental Investigation and Optimization of Printing Parameters of 3D Printed Polyphenylene Sulfide through Response Surface Methodology. J. Appl. Polym. Sci. 2021, 138(1), 49625. DOI: https://doi.org/10.1002/app.49625.
- Bergonzi, L.; Pirondi, A.; Moroni, F.; Frascio, M.; Avalle, M. A Study on Additive Manufacturing Build Parameters as Bonded Joint Design Factors. J. Adhes. 2021, 1–30. DOI: https://doi.org/10.1080/00218464.2020.1862655.
- Chaidas, D.; Kitsakis, K.; Kechagias, J.; Maropoulos, S. The Impact of Temperature Changing on Surface Roughness of FFF Process. IOP Conf. Ser. Mater. Sci. Eng. 2016, 161, 012033. DOI: https://doi.org/10.1088/1757-899X/161/1/012033.
- Hertle, S.; Drexler, M.; Drummer, D. Additive Manufacturing of Poly(Propylene) by Means of Melt Extrusion. Macromol. Mater. Eng. 2016, 301(12), 1482–1493. DOI: https://doi.org/10.1002/mame.201600259.
- Rinaldi, M.; Ghidini, T.; Nanni, F. Fused Filament Fabrication of Polyetheretherketone/Multiwalled Carbon Nanotube Nanocomposites: The Effect of Thermally Conductive Nanometric Filler on the Printability and Related Properties. Polym. Int. 2021, 70(8), 1080–1089. DOI: https://doi.org/10.1002/pi.6206.
- Dilberoglu, U. M.; Simsek, S.; Yaman, U. Shrinkage Compensation Approach Proposed for ABS Material in FDM Process. Mater. Manuf. Process. 2019, 34(9), 993–998. DOI: https://doi.org/10.1080/10426914.2019.1594252.
- Christiyan, K. G. J.; Chandrasekhar, U.; Venkateswarlu, K. A Study on the Influence of Process Parameters on the Mechanical Properties of 3D Printed ABS Composite. IOP Conf. Ser. Mater. Sci. Eng. 2016, 114, 012109. DOI: https://doi.org/10.1088/1757-899X/114/1/012109.
- Rahman, K. M.; Letcher, T.; Reese, R. Mechanical Properties of Additively Manufactured PEEK Components Using Fused Filament Fabrication. In Vol. 2A: Adv. Manuf; ASME: Houston, Texas, USA., 2015. DOI: https://doi.org/10.1115/IMECE2015-52209.
- Harris, M.; Potgieter, J.; Archer, R.; Arif, K. M. In-Process Thermal Treatment of Polylactic Acid in Fused Deposition Modelling. Mater. Manuf. Process. 2019, 34(6), 701–713. DOI: https://doi.org/10.1080/10426914.2019.1566611.
- Durgun, I.; Ertan, R. Experimental Investigation of FDM Process for Improvement of Mechanical Properties and Production Cost. Rapid Prototyp. J. 2014, 20(3), 228–235. DOI: https://doi.org/10.1108/RPJ-10-2012-0091.
- Nyika, J.; Mwema, F. M.; Mahamood, R. M.; Akinlabi, E. T.; Jen, T. Advances in 3D Printing Materials Processing-Environmental Impacts and Alleviation Measures. Adv. Mater. Process. Technol. 2021, 1–11. DOI: https://doi.org/10.1080/2374068X.2021.1945311.
- Messimer, S. L.; Patterson, A. E.; Muna, N.; Deshpande, A. P.; Rocha Pereira, T. Characterization and Processing Behavior of Heated Aluminum-Polycarbonate Composite Build Plates for the FDM Additive Manufacturing Process. J. Manuf. Mater. Process. 2018, 2(1), 12. DOI: https://doi.org/10.3390/jmmp2010012.
- Arigela, S. H.; Ch, R.; K, V. Investigation on Dual Nozzle Fused Deposition Modelling Using Industrial Robot. Adv. Mater. Process. Technol. 2020, 1–19. DOI: https://doi.org/10.1080/2374068X.2020.1855400.
- Scheffel, R. M.; Fröhlich, A. A.; Silvestri, M. Automated Fault Detection for Additive Manufacturing Using Vibration Sensors. Int. J. Comput. Integr. Manuf. 2021, 34(5), 500–514. DOI: https://doi.org/10.1080/0951192X.2021.1901316.
- Tamburrino, F.; Graziosi, S.; Bordegoni, M. The Influence of Slicing Parameters on the Multi-Material Adhesion Mechanisms of FDM Printed Parts: An Exploratory Study. Virtual Phys. Prototyp. 2019, 14(4), 316–332. DOI: https://doi.org/10.1080/17452759.2019.1607758.
- Hashemi Sanatgar, R.; Campagne, C.; Nierstrasz, V. Investigation of the Adhesion Properties of Direct 3D Printing of Polymers and Nanocomposites on Textiles: Effect of FDM Printing Process Parameters. Appl. Surf. Sci. 2017, 403, 551–563. DOI: https://doi.org/10.1016/j.apsusc.2017.01.112.
- Deisenroth, D. C.; Moradi, R.; Shooshtari, A. H.; Singer, F.; Bar-Cohen, A.; Ohadi, M. Review of Heat Exchangers Enabled by Polymer and Polymer Composite Additive Manufacturing. Heat Transfer Engineering. 2018, 39(19), 1648–1664. DOI: https://doi.org/10.1080/01457632.2017.1384280.
- Melenka, G. W.; Schofield, J. S.; Dawson, M. R.; Carey, J. P. Evaluation of Dimensional Accuracy and Material Properties of the MakerBot 3D Desktop Printer. Rapid Prototyp. J. 2015, 21(5), 618–627. DOI: https://doi.org/10.1108/RPJ-09-2013-0093.
- Vyavahare, S.; Kumar, S.; Panghal, D. Experimental Study of Surface Roughness, Dimensional Accuracy and Time of Fabrication of Parts Produced by Fused Deposition Modelling. Rapid Prototyp. J. 2020, 26(9), 1535–1554. DOI: https://doi.org/10.1108/RPJ-12-2019-0315.
- Zandi, M. D.; Jerez-Mesa, R.; Lluma-Fuentes, J.; Jorba-Peiro, J.; Travieso-Rodriguez, J. A. Study of the Manufacturing Process Effects of Fused Filament Fabrication and Injection Molding on Tensile Properties of Composite PLA-Wood Parts. Int. J. Adv. Manuf. Technol. 2020, 108(5–6), 1725–1735. DOI: https://doi.org/10.1007/s00170-020-05522-4.
- Aslani, K.-E.; Chaidas, D.; Kechagias, J.; Kyratsis, P.; Salonitis, K. Quality Performance Evaluation of Thin Walled PLA 3D Printed Parts Using the Taguchi Method and Grey Relational Analysis. J. Manuf. Mater. Process. 2020, 4(2). DOI: https://doi.org/10.3390/jmmp4020047.
- Pérez, M.; Medina-Sánchez, G.; García-Collado, A.; Gupta, M.; Carou, D. Surface Quality Enhancement of Fused Deposition Modeling (FDM) Printed Samples Based on the Selection of Critical Printing Parameters. Materials. 2018, 11(8), 1382. DOI: https://doi.org/10.3390/ma11081382.
- Garg, A.; Bhattacharya, A.; Batish, A. On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment. Mater. Manuf. Process. 2016, 31(4), 522–529. DOI: https://doi.org/10.1080/10426914.2015.1070425.
- Wang, P.; Zou, B.; Ding, S. Modeling of Surface Roughness Based on Heat Transfer considering Diffusion among Deposition Filaments for FDM 3D Printing Heat-Resistant Resin. Appl. Therm. Eng. 2019, 161, 114064. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114064.
- Ahn, D.; Kweon, J.-H.; Kwon, S.; Song, J.; Lee, S. Representation of Surface Roughness in Fused Deposition Modeling. J. Mater. Process. Technol. 2009, 209(15–16), 5593–5600. DOI: https://doi.org/10.1016/j.jmatprotec.2009.05.016.
- Kim, M. K.; Lee, I. H.; Kim, H.-C. Effect of Fabrication Parameters on Surface Roughness of FDM Parts. Int. J. Precis. Eng. 2018, 19(1), 137–142. DOI: https://doi.org/10.1007/s12541-018-0016-0.
- Jackiewicz, J. Manufacturing of Instructional Aids for Students at Low Cost by Means of 3D Printing. Mater. Manuf. Process. 2017, 32(10), 1116–1130. DOI: https://doi.org/10.1080/10426914.2016.1257135.
- Reeves, P. E.; Cobb, R. C. Surface Deviation Modeling of LMT Processes—A Comparative Analysis. In Fifth Eur. Conf. Rapid Prot. Manuf; Dickens, P. M., Ed.; Manuf.; University of Nottingham: Nottingham, 1995; pp 59–77.
- Kumar, K.; Kumar, G. S. An Experimental and Theoretical Investigation of Surface Roughness of Poly-Jet Printed Parts. Virtual Phys. Prototyp. 2015, 10(1), 23–34. DOI: https://doi.org/10.1080/17452759.2014.999218.
- Bikas, H.; Stavropoulos, P.; Chryssolouris, G. Additive Manufacturing Methods and Modelling Approaches: A Critical Review. Int. J. Adv. Manuf. Technol. 2016, 83(1–4), 389–405. DOI: https://doi.org/10.1007/s00170-015-7576-2.
- Vidakis, N.; Petousis, M.; Vaxevanidis, N.; Kechagias, J. Surface Roughness Investigation of Poly-Jet 3D Printing. Mathematics. 2020, 8(10), 10. DOI: https://doi.org/10.3390/math8101758.
- Fazzini, G.; Paolini, P.; Paolucci, R.; Chiulli, D.; Barile, G.; Leoni, A.; Muttillo, M.; Pantoli, L.; Ferri, G. Print On Air: FDM 3D Printing Without Supports. In MetroInd4.0, Naples, Italy; IEEE, 2019; pp 350–354. DOI:https://doi.org/10.1109/METROI4.2019.8792846.
- Gurrala, P. K.; Regalla, S. P. Multi-Objective Optimisation of Strength and Volumetric Shrinkage of FDM Parts. Virtual Phys. Prototyp. 2014, 9(2), 2. DOI: https://doi.org/10.1080/17452759.2014.898851.
- Faria, C.; Fonseca, J.; Bicho, E. FIBR3DEmul—an Open-Access Simulation Solution for 3D Printing Processes of FDM Machines with 3+ Actuated Axes. Int. J. Adv. Manuf. Technol. 2020, 106(7–8), 3609–3623. DOI: https://doi.org/10.1007/s00170-019-04713-y.
- Langelaar, M. Combined Optimization of Part Topology, Support Structure Layout and Build Orientation for Additive Manufacturing. Struct. Multidiscip. Optim. 2018, 57(5), 1985–2004. DOI: https://doi.org/10.1007/s00158-017-1877-z.
- Syamsuzzaman, M.; Mardi, N. A.; Fadzil, M.; Farazila, Y. Investigation of Layer Thickness Effect on the Performance of Low-Cost and Commercial Fused Deposition Modelling Printers. Mater. Res. Innov. 2014, 18(sup6), SS6–489. DOI: https://doi.org/10.1179/1432891714Z.0000000001030.
- Rankouhi, B.; Javadpour, S.; Delfanian, F.; Letcher, T. Failure Analysis and Mechanical Characterization of 3D Printed ABS with respect to Layer Thickness and Orientation. J. Fail. Anal. Prev. 2016, 16(3), 467–481. DOI: https://doi.org/10.1007/s11668-016-0113-2.
- D’Amico, A. A.; Debaie, A.; Peterson, A. M. Effect of Layer Thickness on Irreversible Thermal Expansion and Interlayer Strength in Fused Deposition Modeling. Rapid Prototyp. J. 2017, 23(5), 943–953. DOI: https://doi.org/10.1108/RPJ-05-2016-0077.
- Goh, G. D.; Yap, Y. L.; Tan, H. K. J.; Sing, S. L.; Goh, G. L.; Yeong, W. Y. Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review. Crit. Rev. Solid State Mater. Sci. 2020, 45(2), 113–133. DOI: https://doi.org/10.1080/10408436.2018.1549977.
- Wach, R. A.; Wolszczak, P.; Adamus-Wlodarczyk, A. Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing. Macromol. Mater. Eng. 2018, 303(9), 1800169. DOI: https://doi.org/10.1002/mame.201800169.
- Wojtyła, S.; Klama, P.; Baran, T. Is 3D Printing Safe? Analysis of the Thermal Treatment of Thermoplastics: ABS, PLA, PET, and Nylon. J. Occup. Environ. Hyg . 2017, 14(6), D80–D85. DOI: https://doi.org/10.1080/15459624.2017.1285489.
- Cuiffo, M. A.; Snyder, J.; Elliott, A. M.; Romero, N.; Kannan, S.; Halada, G. P. Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure. Appl. Sci. 2017, 7(6), 579. DOI: https://doi.org/10.3390/app7060579.
- Marwah, O. M. F.; Yahaya, N. F.; Darsani, A.; Mohamad, E. J.; Haq, R. H. A.; Johar, M. A.; Othman, M. H. Investigation For Shrinkage Deformation In The Desktop 3D Printer Process By Using DOE Approach Of The ABS Materials. J. Phys. Conf. Ser. 2019, 1150, 012038. DOI: https://doi.org/10.1088/1742-6596/1150/1/012038.
- Choi, Y.-H.; Kim, C.-M.; Jeong, H.-S.; Youn, J.-H. Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic. World J. Eng. Tech. 2016, 4(3), 186–192. DOI: https://doi.org/10.4236/wjet.2016.43D022.
- Žarko, J.; Vladić, G.; Pál, M.; Dedijer, S. Influence of Printing Speed on Production of Embossing Tools Using FDM 3d Printing Technology. J. Graph. Eng. Des. 2017, 8(1), 19–27. DOI: https://doi.org/10.24867/JGED-2017-1-019.
- Lyu, J.; Manoochehri, S. Online Convolutional Neural Network-Based Anomaly Detection and Quality Control for Fused Filament Fabrication Process. Virtual Phys. Prototyp. 2021, 16(2), 160–177. DOI: https://doi.org/10.1080/17452759.2021.1905858.
- Kain, S.; Ecker, J. V.; Haider, A.; Musso, M.; Petutschnigg, A. Effects of the Infill Pattern on Mechanical Properties of Fused Layer Modeling (FLM) 3D Printed Wood/Polylactic Acid (PLA) Composites. Eur. J. Wood Wood Prod. 2020, 78(1), 65–74. DOI: https://doi.org/10.1007/s00107-019-01473-0.
- Gopsill, J. A.; Shindler, J.; Hicks, B. J. Using Finite Element Analysis to Influence the Infill Design of Fused Deposition Modelled Parts. Prog. Addit. Manuf. 2018, 3(3), 145–163. DOI: https://doi.org/10.1007/s40964-017-0034-y.
- Wu, W.; Geng, P.; Li, G.; Zhao, D.; Zhang, H.; Zhao, J. Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS. Materials. 2015, 8(9), 5834–5846. DOI: https://doi.org/10.3390/ma8095271.
- Alsoufi, M. S.; Elsayed, A. E. Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer. Mater. Sci. Appl. 2018, 9(1), 11–40. DOI: https://doi.org/10.4236/msa.2018.91002.
- Wu, C.; Dai, C.; Fang, G.; Liu, Y.-J.; Wang, C. C. L. RoboFDM: A Robotic System for Support-Free Fabrication Using FDM. In Int. Conf. Robotics and Automation (ICRA), Singapore; IEEE, 2017; pp 1175–1180. DOI:https://doi.org/10.1109/ICRA.2017.7989140.
- Lee, J.; Lee, K. Block-Based Inner Support Structure Generation Algorithm for 3D Printing Using Fused Deposition Modeling. Int. J. Adv. Manuf. Technol. 2017, 89(5–8), 2151–2163. DOI: https://doi.org/10.1007/s00170-016-9239-3.
- Chueca de Bruijn, A.; Gómez-Gras, G.; Pérez, M. A. Mechanical Study on the Impact of an Effective Solvent Support-Removal Methodology for FDM Ultem 9085 Parts. Polym. Test. 2020, 85, 106433. DOI: https://doi.org/10.1016/j.polymertesting.2020.106433.
- Valerga Puerta, A. P.; Lopez-Castro, J. D.; Ojeda López, A.; Fernández Vidal, S. R. On Improving the Surface Finish of 3D Printing Polylactic Acid Parts by Corundum Blasting. Rapid Prototyp. J. 2021, 27(7), 1398–1407. DOI: https://doi.org/10.1108/RPJ-05-2021-0105.
- Javaid, M.; Haleem, A. Additive Manufacturing Applications in Medical Cases: A Literature Based Review. Alexandria J. Med. 2018, 54(4), 411–422. DOI: https://doi.org/10.1016/j.ajme.2017.09.003.
- Hurst, E. J. 3D Printing in Healthcare: Emerging Applications. J. Hosp. Librariansh. 2016, 16(3), 255–267. DOI: https://doi.org/10.1080/15323269.2016.1188042.
- Taufik, M.; Jain, P. K. On the Achieving Uniform Finishing Allowance through Identifying Shape Deviation for Additive Manufacturing. Aust. J. Mech. Eng. 2021, 1–19. DOI: https://doi.org/10.1080/14484846.2021.1873067.
- Mali, H. S.; Prajwal, B.; Gupta, D.; Kishan, J. Abrasive Flow Finishing of FDM Printed Parts Using a Sustainable Media. Rapid Prototyp. J. 2018, 24(3), 593–606. DOI: https://doi.org/10.1108/RPJ-10-2017-0199.
- Pal, A. K.; Mohanty, A. K.; Misra, M. Additive Manufacturing Technology of Polymeric Materials for Customized Products: Recent Developments and Future Prospective. RSC Adv. 2021, 11(58), 36398–36438. DOI: https://doi.org/10.1039/D1RA04060J.
- Rodríguez-Panes, A.; Claver, J.; Camacho, A. The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis. Materials. 2018, 11(8), 1333. DOI: https://doi.org/10.3390/ma11081333.
- Kechagias, J. D.; Ninikas, K.; Petousis, M.; Vidakis, N.; Vaxevanidis, N. An Investigation of Surface Quality Characteristics of 3D Printed PLA Plates Cut by CO2 Laser Using Experimental Design. Mater. Manuf. Process. 2021, 36(13), 1544–1553. DOI: https://doi.org/10.1080/10426914.2021.1906892.
- Gardan, J. Smart Materials in Additive Manufacturing: State of the Art and Trends. Virtual Phys. Prototyp. 2019, 14(1), 1–18. DOI: https://doi.org/10.1080/17452759.2018.1518016.
- Chokshi, H.; Shah, D. B.; Patel, K. M.; Joshi, S. J. Experimental Investigations of Process Parameters on Mechanical Properties for PLA during Processing in FDM. Adv. Mater. Process. Technol. 2021, 1–14. DOI: https://doi.org/10.1080/2374068X.2021.1946756.
- Harris, M.; Potgieter, J.; Ray, S.; Archer, R.; Arif, K. M. Preparation and Characterization of Thermally Stable ABS/HDPE Blend for Fused Filament Fabrication. Mater. Manuf. Process. 2020, 35(2), 230–240. DOI: https://doi.org/10.1080/10426914.2019.1692355.
- Cazón, A.; Prada, J. G.; García, E.; Larraona, G. S.; Ausejo, S. Pilot Study Describing the Design Process of an Oil Sump for a Competition Vehicle by Combining Additive Manufacturing and Carbon Fibre Layers. Virtual Phys. Prototyp. 2015, 10(3), 149–162. DOI: https://doi.org/10.1080/17452759.2015.1076240.
- Savvakis, K.; Petousis, M.; Vairis, A.; Vidakis, N.; Bikmeyev, A. T. Experimental Determination of the Tensile Strength of Fused Deposition Modeling Parts. IMECE2014; ASME: Montreal, Quebec, Canada, 2014; 6. DOI: https://doi.org/10.1115/IMECE2014-37553.
- Vidakis, N.; Petousis, M.; Vairis, A.; Savvakis, K.; Maniadi, A. A Parametric Determination of Bending and Charpy’s Impact Strength of ABS and ABS-plus Fused Deposition Modeling Specimens. Prog. Addit. Manuf. 2019, 4(3), 323–330. DOI: https://doi.org/10.1007/s40964-019-00092-8.
- Vidakis, N.; Petousis, M.; Vairis, A.; Savvakis, K.; Maniadi, A. On the Compressive Behavior of an FDM Steward Platform Part. J. Comput. Des. Eng. 2017, 4(4), 339–346. DOI: https://doi.org/10.1016/j.jcde.2017.06.001.
- Vidakis, N.; Vairis, A.; Petousis, M.; Savvakis, K.; Kechagias, J. Fused Deposition Modelling Parts Tensile Strength Characterisation. Academic J. Manuf. Eng. 2016, 14(2), 87–94.
- Vidakis, N.; Petousis, M.; Maniadi, A.; Koudoumas, E.; Vairis, A.; Kechagias, J. Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes. Sustainability. 2020, 12(9), 3568. DOI: https://doi.org/10.3390/su12093568.
- Vidakis, N.; Maniadi, A.; Petousis, M.; Vamvakaki, M.; Kenanakis, G.; Koudoumas, E. Mechanical and Electrical Properties Investigation of 3D-Printed Acrylonitrile–Butadiene–Styrene Graphene and Carbon Nanocomposites. J. Mater. Eng. Perform. 2020, 29(3), 1909–1918. DOI: https://doi.org/10.1007/s11665-020-04689-x.
- Vidakis, N.; Petousis, M.; Maniadi, A.; Koudoumas, E.; Kenanakis, G.; Romanitan, C.; Tutunaru, O.; Suchea, M.; Kechagias, J. The Mechanical and Physical Properties of 3D-Printed Materials Composed of ABS-ZnO Nanocomposites and ABS-ZnO Microcomposites. Micromachines. 2020, 11(6), 615. DOI: https://doi.org/10.3390/mi11060615.
- Vidakis, N.; Petousis, M.; Korlos, A.; Velidakis, E.; Mountakis, N.; Charou, C.; Myftari, A. Strain Rate Sensitivity of Polycarbonate and Thermoplastic Polyurethane for Various 3D Printing Temperatures and Layer Heights. Polymers. 2021, 13(16), 2752. DOI: https://doi.org/10.3390/polym13162752.
- Reich, M. J.; Woern, A. L.; Tanikella, N. G.; Pearce, J. M. Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing. Materials. 2019, 12(10), 1642. DOI: https://doi.org/10.3390/ma12101642.
- Vidakis, N.; Petousis, M.; Velidakis, E.; Spiridaki, M.; Kechagias, J. D. Mechanical Performance of Fused Filament Fabricated and 3D-Printed Polycarbonate Polymer and Polycarbonate/Cellulose Nanofiber Nanocomposites. Fibers. 2021, 9(11), 74. DOI: https://doi.org/10.3390/fib9110074.
- Vidakis, N.; Petousis, M.; Tzounis, L.; Maniadi, A.; Velidakis, E.; Mountakis, N.; Kechagias, J. D. Sustainable Additive Manufacturing: Mechanical Response of Polyamide 12 over Multiple Recycling Processes. Materials. 2021, 14(2), 466. DOI: https://doi.org/10.3390/ma14020466.
- Rahim, T. N. A. T.; Abdullah, A. M.; Md Akil, H.; Mohamad, D.; Rajion, Z. A. The Improvement of Mechanical and Thermal Properties of Polyamide 12 3D Printed Parts by Fused Deposition Modelling. Express Polym. Lett. 2017, 11(12), 963–982. DOI: https://doi.org/10.3144/expresspolymlett.2017.92.
- Leng, J.; Gu, X.; Hong, R.; Zhang, J. Tailored Crystalline Structure and Enhanced Impact Strength of Isotactic Polypropylene/High-Density Polyethylene Blend by Controlling the Printing Speed of Fused Filament Fabrication. J. Mater. Sci. 2020, 55(28), 14058–14073. DOI: https://doi.org/10.1007/s10853-020-04999-4.
- Vidakis, N.; Petousis, M.; Velidakis, E.; Tzounis, L.; Mountakis, N.; Kechagias, J.; Grammatikos, S. Optimization of the Filler Concentration on Fused Filament Fabrication 3D Printed Polypropylene with Titanium Dioxide Nanocomposites. Materials. 2021, 14(11), 3076. DOI: https://doi.org/10.3390/ma14113076.
- Cao, S.; Yu, D.; Xue, W.; Zeng, Z.; Zhu, W. Synthesis and Properties of Modified PBT for FDM. Rapid Prototyp. J. 2017, 23(4), 804–810. DOI: https://doi.org/10.1108/RPJ-12-2015-0197.
- Kechagias, J. D.; Fountas, N. A.; Ninikas, K.; Petousis, M.; Vidakis, N.; Vaxevanidis, N. Surface Characteristics Investigation of 3D-Printed PET-G Plates during CO2 Laser Cutting. Mater. Manuf. Process. 2021, 1–11. DOI: https://doi.org/10.1080/10426914.2021.1981933.
- Honigmann, P.; Sharma, N.; Okolo, B.; Popp, U.; Msallem, B.; Thieringer, F. M. Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application. BioMed. Res. Int. 2018, 2018, 1–8. DOI: https://doi.org/10.1155/2018/4520636.
- McLauchlin, A. R.; Ghita, O. R.; Savage, L. Studies on the Reprocessability of Poly(Ether Ether Ketone) (PEEK). J. Mater. Process. Technol. 2014, 214(1), 75–80. DOI: https://doi.org/10.1016/j.jmatprotec.2013.07.010.
- Garcia‐Leiner, M.; Streifel, B.; Başgül, C.; MacDonald, D. W.; Kurtz, S. M. Characterization of Polyaryletherketone (PAEK) Filaments and Printed Parts Produced by Extrusion‐based Additive Manufacturing. Polym. Int. 2021, 70(8), 1128–1136. DOI: https://doi.org/10.1002/pi.6231.
- Ni, F.; Wang, G.; Zhao, H. Fabrication of Water-Soluble Poly(Vinyl Alcohol)-Based Composites with Improved Thermal Behavior for Potential Three-Dimensional Printing Application. J. Appl. Polym. Sci. 2017, 134, 24. DOI: https://doi.org/10.1002/app.44966.
- Park, S. J.; Lee, J. E.; Park, J. H.; Lee, N. K.; Lyu, M.-Y.; Park, K.; Koo, M. S.; Cho, S. H.; Son, Y.; Park, S.-H. Enhanced Solubility of the Support in an FDM-Based 3D Printed Structure Using Hydrogen Peroxide under Ultrasonication. Adv. Mater. Sci. Eng. 2018, 2018, 1–10. DOI: https://doi.org/10.1155/2018/3018761.
- Mizera, A.; Bednarik, M.; Mizera, M.; Tomanova, K.; Mohorko, M. Tensile Impact Behaviour of 3D Printed Parts on FFF/FDM Printer Zortrax M200; MATEC Web Conf.: France, 2018; Vol. 210. 04049. doi:https://doi.org/10.1051/matecconf/201821004049.
- Samouh, Z.; Molnar, K.; Boussu, F.; Cherkaoui, O.; El Moznine, R. Mechanical and Thermal Characterization of Sisal Fiber Reinforced Polylactic Acid Composites. Polym. Adv. Technol. 2019, 30(3), 529–537. DOI: https://doi.org/10.1002/pat.4488.
- Santo, J.; Penumakala, P. K.; Adusumalli, R. B. Mechanical and Electrical Properties of Three‐dimensional Printed Polylactic Acid–Graphene–Carbon Nanofiber Composites. Polym. Compos. 2021, 42(7), 3231–3242. DOI: https://doi.org/10.1002/pc.26053.
- Zgryza, Ł.; Raczyńska, A.; Paśnikowska-Łukaszuk, M. Thermovisual Measurments of 3D Printing of ABS and PLA Filaments. Adv. Sci. Technol. Res. J. 2018, 12(3), 266–271. DOI: https://doi.org/10.12913/22998624/94325.
- Yusoff, R. B.; Takagi, H.; Nakagaito, A. N. Tensile and Flexural Properties of Polylactic Acid-Based Hybrid Green Composites Reinforced by Kenaf, Bamboo and Coir Fibers. Ind. Crop Prod. 2016, 94, 562–573. DOI: https://doi.org/10.1016/j.indcrop.2016.09.017.
- Lanzotti, A.; Martorelli, M.; Maietta, S.; Gerbino, S.; Penta, F.; Gloria, A. A Comparison between Mechanical Properties of Specimens 3D Printed with Virgin and Recycled PLA. Procedia CIRP. 2019, 79, 143–146. DOI: https://doi.org/10.1016/j.procir.2019.02.030.
- Soares, J. B.; Finamor, J.; Silva, F. P.; Roldo, L.; Cândido, L. H. Analysis of the Influence of Polylactic Acid (PLA) Colour on FDM 3D Printing Temperature and Part Finishing. Rapid Prototyp. J. 2018, 24(8), 1305–1316. DOI: https://doi.org/10.1108/RPJ-09-2017-0177.
- Ahn, S.; Montero, M.; Odell, D.; Roundy, S.; Wright, P. K. Anisotropic Material Properties of Fused Deposition Modeling ABS. Rapid Prototyp. J. 2002, 8(4), 248–257. DOI: https://doi.org/10.1108/13552540210441166.
- Chockalingam, K.; Jawahar, N.; Praveen, J. Enhancement of Anisotropic Strength of Fused Deposited ABS Parts by Genetic Algorithm. Mater. Manuf. Process. 2016, 31(15), 2001–2010. DOI: https://doi.org/10.1080/10426914.2015.1127949.
- Kechagias, J.; Ninikas, K.; Petousis, M.; Vidakis, N. Laser Cutting of 3D Printed Acrylonitrile Butadiene Styrene Plates for Dimensional and Surface Roughness Optimization. Int. J. Adv. Manuf. Technol. 2021. DOI: https://doi.org/10.1007/s00170-021-08350-2.
- Corsi, M.; Bagassi, S.; Moruzzi, M. C.; Weigand, F. Additively Manufactured Negative Stiffness Structures for Shock Absorber Applications. Mech. Adv. Mater. Struct. 2020, 1–12. DOI: https://doi.org/10.1080/15376494.2020.1801917.
- Cho, S. H.; Oh, S. H.; Lee, J. H. Fabrication and Characterization of Porous Alginate/Polyvinyl Alcohol Hybrid Scaffolds for 3D Cell Culture. J. Biomater. Sci. Polym. Educ. 2005, 16(8), 933–947. DOI: https://doi.org/10.1163/1568562054414658.
- Jia, N.; Fraenkel, H. A.; Kagan, V. A. Effects of Moisture Conditioning Methods on Mechanical Properties of Injection Molded Nylon 6. J. Reinf. Plast. Compos. 2004, 23(7), 729–737. DOI: https://doi.org/10.1177/0731684404030730.
- Barrios, J. M.; Romero, P. E. Improvement of Surface Roughness and Hydrophobicity in PETG Parts Manufactured via Fused Deposition Modeling (FDM): An Application in 3D Printed Self–Cleaning Parts. Materials. 2019, 12(15), 2499. DOI: https://doi.org/10.3390/ma12152499.
- Kumar, R.; Singh, R.; Farina, I. On the 3D Printing of Recycled ABS, PLA and HIPS Thermoplastics for Structural Applications. PSU Res. Rev. 2018, 2(2), 115–137. DOI: https://doi.org/10.1108/PRR-07-2018-0018.
- Salazar-Martín, A. G.; Pérez, M. A.; García-Granada, -A.-A.; Reyes, G.; Puigoriol-Forcada, J. M. A Study of Creep in Polycarbonate Fused Deposition Modelling Parts. Mater. Des. 2018, 141, 414–425. DOI: https://doi.org/10.1016/j.matdes.2018.01.008.
- Chen, R. K.; Lo, T. T.; Chen, L.; Shih, A. J. Nano-CT Characterization of Structural Voids and Air Bubbles in Fused Deposition Modeling for Additive Manufacturing. In ASME 2015 International Manufacturing Science and Engineering Conference; Charlotte: North Carolina, USA, 2015; Vol. 1:Processing. DOI:https://doi.org/10.1115/MSEC2015-9462.
- Verma, D.; Dong, Y.; Sharma, M.; Chaudhary, A. K. Advanced Processing of 3D Printed Biocomposite Materials Using Artificial Intelligence. Mater. Manuf. Process. 2021, 1–21. DOI: https://doi.org/10.1080/10426914.2021.1945090.
- Vidakis, N.; Petousis, M.; Velidakis, E.; Mountakis, N.; Fischer-Griffiths, P. E.; Grammatikos, S. A.; Tzounis, L. Mechanical Reinforcement Course of 3D Printed Polypropylene–Antimony Doped Tin Oxide Nanocomposites versus Filler Loading. Adv. Compos. Mater. 2021, 1–22. DOI: https://doi.org/10.1080/09243046.2021.1973173.
- Vidakis, N.; Petousis, M.; Kourinou, M.; Velidakis, E.; Mountakis, N.; Fischer-Griffiths, P. E.; Grammatikos, S.; Tzounis, L. Additive Manufacturing of Multifunctional Polylactic Acid (Pla)—multiwalled Carbon Nanotubes (Mwcnts) Nanocomposites. Nanocomposites. 2021, 7(1), 184–199. DOI: https://doi.org/10.1080/20550324.2021.2000231.
- Rafiee, M.; Abidnejad, R.; Ranta, A.; Ojha, K.; Karakoç, A.; Paltakari, J. Exploring the Possibilities of FDM Filaments Comprising Natural Fiber-Reinforced Biocomposites for Additive Manufacturing. AIMS Mater. Sci. 2021, 8(4), 524–537. DOI: https://doi.org/10.3934/matersci.2021032.
- Martinez, L.; Palessonga, D.; Roquefort, P.; Chevalier, A.; Maalouf, A.; Ville, J.; Laur, V. Development of a High Temperature Printable Composite for Microwave Absorption Applications. AIMS Mater. Sci. 2021, 8(5), 739–747. DOI: https://doi.org/10.3934/matersci.2021044.
- Zhang, Z.; Demir, K. G.; Gu, G. X. Developments in 4D-Printing: A Review on Current Smart Materials, Technologies, and Applications. Int. J. Smart Nano Mater. 2019, 10(3), 205–224. DOI: https://doi.org/10.1080/19475411.2019.1591541.
- Parmar, H.; Khan, T.; Tucci, F.; Umer, R.; Carlone, P. Advanced Robotics and Additive Manufacturing of Composites: Towards a New Era in Industry 4.0. Mater. Manuf. Process. 2021, 1–35. DOI: https://doi.org/10.1080/10426914.2020.1866195.
- Sukindar, N. A.; Ariffin, M. K. A.; Baharudin, B. T. H. T.; Jaafar, C. N. A.; Ismail, M. I. S. Analyzing the Effect of Nozzle Diameter in Fused Deposition Modeling for Extruding Polylactic Acid Using Open Source 3D Printing. J. Teknol. 2016, 78(10). DOI: https://doi.org/10.11113/jt.v78.6265.
- Bakrani Balani, S.; Chabert, F.; Nassiet, V.; Cantarel, A. Influence of Printing Parameters on the Stability of Deposited Beads in Fused Filament Fabrication of Poly(Lactic) Acid. Addit. Manuf. 2019, 25, 112–121. DOI: https://doi.org/10.1016/j.addma.2018.10.012.
- Han, S.; Xiao, Y.; Qi, T.; Li, Z.; Zeng, Q. Design and Analysis of Fused Deposition Modeling 3D Printer Nozzle for Color Mixing. Adv. Mater. Sci. Eng. 2017, 2017, 1–12. DOI: https://doi.org/10.1155/2017/2095137.
- Reiner, T.; Carr, N.; Měch, R.; Št’ava, O.; Dachsbacher, C.; Miller, G. Dual-Color Mixing for Fused Deposition Modeling Printers. Comp. Graph. Forum. 2014, 33(2), 479–486. DOI: https://doi.org/10.1111/cgf.12319.
- Ali, M.; Mir-Nasiri, H.; Ko, N.; L, W. Multi-Nozzle Extrusion System for 3D Printer and Its Control Mechanism. Int. J. Adv. Manuf. Technol. 2016, 86(1–4), 999–1010. DOI: https://doi.org/10.1007/s00170-015-8205-9.
- Khalil, S.; Nam, J.; Sun, W. Multi‐nozzle Deposition for Construction of 3D Biopolymer Tissue Scaffolds. Rapid Prototyp. J. 2005, 11(1), 9–17. DOI: https://doi.org/10.1108/13552540510573347.
- Widden, M.; Gunn, K. Design–Build–Test of Model Aerofoils for Engineering Education Using FDM. Virtual Phys. Prototyp. 2010, 5(4), 189–194. DOI: https://doi.org/10.1080/17452759.2010.528841.
- Canessa, E.; Fonda, C.; Zennaro, M.; Deadline, N. Low-‐cost 3D Printing for Science, Education and Sustainable Development. Low-Cost 3D Print. 2013, 11, 1.
- Horta, J. F.; Simões, F. J. P.; Mateus, A. Large Scale Additive Manufacturing of Eco-Composites. Int. J. Mater. Form. 2018, 11(3), 375–380. DOI: https://doi.org/10.1007/s12289-017-1364-5.
- Zhang, D.; Li, Z.; Qin, S.; Han, S. Optimization of Vibration Characteristics of Fused Deposition Modeling Color 3D Printer Based on Modal and Power Spectrum Method. Appl. Sci. 2019, 9(19), 4154. DOI: https://doi.org/10.3390/app9194154.
- Rao, P. K.; Liu, J. (Peter); Roberson, D.; Kong, Z. (James); Williams, C. Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors. J. Manuf. Sci. Eng. 2015, 137(6), 6. DOI: https://doi.org/10.1115/1.4029823.
- Shen, X.; Wang, Q.; Fu, Z. Y.; Bai, S. W.; Sun, Z. Y. Dynamic States Specific Analysis for Belt Conveyor Based on FDM. Appl. Mech. Mater. 2013, 278–280, 27–30. www.scientific.net.
- Floyd, E. L.; Wang, J.; Regens, J. L. Fume Emissions from a Low-Cost 3-D Printer with Various Filaments. J. Occup. Environ. Hyg. 2017, 14(7), 523–533. DOI: https://doi.org/10.1080/15459624.2017.1302587.
- Lyu, J.; Manoochehri, S. Error Modeling and Compensation for FDM Machines. Rapid Prototyp. J. 2019, 25(10), 1565–1574. DOI: https://doi.org/10.1108/RPJ-04-2017-0068.
- Hernandez, D. Factors Affecting Dimensional Precision of Consumer 3D Printing. Int. J. Aviat. Aeronaut. 2015. DOI: https://doi.org/10.15394/ijaaa.2015.1085.
- Tsiolikas, A.; Mikrou, T.; Vakouftsi, F.; Aslani, K. E.; Kechagias, J. Robust Design Application for Optimizing ABS Fused Filament Fabrication Process: A Case Study. IOP Conf. Ser. Mater. Sci. Eng. 2019, 564(1), 012021. DOI: https://doi.org/10.1088/1757-899X/564/1/012021.
- Saad, M. S.; Nor, A. M.; Baharudin, M. E.; Zakaria, M. Z.; Aiman, A. F. Optimization of Surface Roughness in FDM 3D Printer Using Response Surface Methodology, Particle Swarm Optimization, and Symbiotic Organism Search Algorithms. Int. J. Adv. Manuf. Technol. 2019, 105(12), 5121–5137. DOI: https://doi.org/10.1007/s00170-019-04568-3.
- Vahabli, E.; Rahmati, S. Application of an RBF Neural Network for FDM Parts’ Surface Roughness Prediction for Enhancing Surface Quality. Int. J. Precis. Eng. 2016, 17(12), 1589–1603. DOI: https://doi.org/10.1007/s12541-016-0185-7.
- Mahapatra, S. S.; Sood, A. K. Bayesian Regularization-Based Levenberg–Marquardt Neural Model Combined with BFOA for Improving Surface Finish of FDM Processed Part. Int. J. Adv. Manuf. Technol. 2012, 60(9–12), 1223–1235. DOI: https://doi.org/10.1007/s00170-011-3675-x.
- Boschetto, A.; Giordano, V.; Veniali, F. Surface Roughness Prediction in Fused Deposition Modelling by Neural Networks. Int. J. Adv. Manuf. Technol. 2013, 67(9–12), 2727–2742. DOI: https://doi.org/10.1007/s00170-012-4687-x.
- Vijayaraghavan, V.; Garg, A.; Lam, J. S. L.; Panda, B.; Mahapatra, S. S. Process Characterisation of 3D-Printed FDM Components Using Improved Evolutionary Computational Approach. Int. J. Adv. Manuf. Technol. 2015, 78(5–8), 781–793. DOI: https://doi.org/10.1007/s00170-014-6679-5.
- Wankhede, V.; Jagetiya, D.; Joshi, A.; Chaudhari, R. Experimental Investigation of FDM Process Parameters Using Taguchi Analysis; Mater. Proc: Today, 2020. Vol. 27. 2117–2120. https://doi.org/10.1016/j.matpr.2019.09.078.
- Srivastava, M.; Rathee, S. Optimisation of FDM Process Parameters by Taguchi Method for Imparting Customised Properties to Components. Virtual Phys. Prototyp. 2018, 13(3), 203–210. DOI: https://doi.org/10.1080/17452759.2018.1440722.
- Ippolito, R.; Iuliano, L.; Gatto, A. Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional Accuracy and Surface Finish. CIRP Annals. 1995, 44(1), 157–160. DOI: https://doi.org/10.1016/S0007-8506(07)62296-3.
- Chung Wang, C.; Lin, T.; Hu, S. Optimizing the Rapid Prototyping Process by Integrating the Taguchi Method with the Gray Relational Analysis. Rapid Prototyp. J. 2007, 13(5), 304–315. DOI: https://doi.org/10.1108/13552540710824814.
- Noriega, A.; Blanco, D.; Alvarez, B. J.; Garcia, A. Dimensional Accuracy Improvement of FDM Square Cross-Section Parts Using Artificial Neural Networks and an Optimization Algorithm. Int. J. Adv. Manuf. Technol. 2013, 69(9–12), 2301–2313. DOI: https://doi.org/10.1007/s00170-013-5196-2.
- Johnson, M.; Rowell, W.; Deason, M.; Eubanks M, B. Comparative Evaluation of an Open-Source FDM System. Rapid Prototyp. J. 2014, 20(3), 205–214. DOI: https://doi.org/10.1108/RPJ-06-2012-0058.
- Moza, Z.; Kitsakis, K.; Kechagias, J.; Mastorakis, N. Optimizing Dimensional Accuracy of Fused Filament Fabrication Using Taguchi Design. In 14th Int. Conf. Instr. Measur. Circ. Systems (IMCAS-15), Salerno, Italy, 27–29 June 2015; pp 110–114.
- Kitsakis, K.; Alabey, P.; Kechagias, J.; Vaxevanidis, N. A Study of the Dimensional Accuracy Obtained by Low Cost 3D Printing for Possible Application in Medicine. IOP Conf. Ser. Mater. Sci. Eng. 2016, 161, 012025. DOI: https://doi.org/10.1088/1757-899X/161/1/012025.
- Boschetto, A.; Bottini, L. Design for Manufacturing of Surfaces to Improve Accuracy in Fused Deposition Modeling. Robot. Comput. Integr. Manuf. 2016, 37, 103–114. DOI: https://doi.org/10.1016/j.rcim.2015.07.005.
- Choi, Y.-H.; Kim, C.-M.; Jeong, H.-S.; Youn, J.-H.; Choi, Y.-H.; Kim, C.-M.; Jeong, H.-S.; Youn, J.-H. Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic. World J. Eng.Technol. 2016, 4(3), 186–192. DOI: https://doi.org/10.4236/WJET.2016.43D022.
- Polak, R.; Sedlacek, F.; Raz, K. Determination of FDM Printer Settings with Regard to Geometrical Accuracy. In 28th DAAAM Int. Symposium; Katalinic, B., Ed.; DAAAM International: Vienna, Austria, 2017; pp 0561–0566. DOI:https://doi.org/10.2507/28th.daaam.proceedings.079.
- Mohamed, O. A.; Masood, S. H.; Bhowmik, J. L. Experimental Investigation for Dynamic Stiffness and Dimensional Accuracy of FDM Manufactured Part Using IV-Optimal Response Surface Design. Rapid Prototyp. J. 2017, 23(4), 736–749. DOI: https://doi.org/10.1108/RPJ-10-2015-0137.
- Equbal, A.; Sood, A. K.; Ansari, A. K.; Equbal, A. Optimization of Process Parameters of FDM Part for Minimiizing Its Dimensional Inaccuracy. Int. J. Mech. Prod. Eng. Res. Develop. 2017, 7(2), 57–65.
- Alsoufi, M. S.; Elsayed, A. E. How Surface Roughness Performance of Printed Parts Manufactured by Desktop FDM 3D Printer with PLA+ Is Influenced by Measuring Direction. Am. J. Mech. Eng. 2017, 5(5), 211–222. DOI: https://doi.org/10.12691/ajme-5-5-4.
- Redza Ramli, F.; Afdhal Nazan, M.; Sudin, M.; Ramli, F. R.; M Faudzie, M. S.; Nazan, M. A.; Alkahari, M. R.; Sudin, M. N.; Mat, S.; Khalil, S. N. Dimensional Accuracy and Surface Roughness of Part Features Manufactured by Open Source 3D Printer. ARPN J. Eng. Appl. 2018, 13(3), 1139–1144.
- Alafaghani, A.; Qattawi, A. Investigating the Effect of Fused Deposition Modeling Processing Parameters Using Taguchi Design of Experiment Method. J. Manuf. Process. 2018, 36, 164–174. DOI: https://doi.org/10.1016/j.jmapro.2018.09.025.
- Minetola, P.; Galati, M. A Challenge for Enhancing the Dimensional Accuracy of A Low-Cost 3D Printer by Means of Self-Replicated Parts. Addit. Manuf. 2018, 22, 256–264. DOI: https://doi.org/10.1016/j.addma.2018.05.028.
- García Plaza, E.; Núñez López, P.; Caminero Torija, M.; Chacón Muñoz, J. Analysis of PLA Geometric Properties Processed by FFF Additive Manufacturing: Effects of Process Parameters and Plate-Extruder Precision Motion. Polymers. 2019, 11(10), 1581. DOI: https://doi.org/10.3390/polym11101581.
- Akbaş, O. E.; Hıra, O.; Hervan, S. Z.; Samankan, S.; Altınkaynak, A. Dimensional Accuracy of FDM-Printed Polymer Parts. Rapid Prototyp. J. 2019, 26(2), 288–298. DOI: https://doi.org/10.1108/RPJ-04-2019-0115.
- Jain, R.; Nauriyal, S.; Gupta, V.; Khas, K. S. Effects of Process Parameters on Surface Roughness, Dimensional Accuracy and Printing Time in 3D Printing. Adv. Prod. Ind. Eng. 2021, 187–197. DOI: https://doi.org/10.1007/978-981-15-5519-0_15.
- Elkaseer, A.; Schneider, S.; Scholz, S. G. Experiment-Based Process Modeling and Optimization for High-Quality and Resource-Efficient FFF 3D Printing. Appl. Sci. 2020, 10(8), 2899. DOI: https://doi.org/10.3390/app10082899.
- Chohan, J. S.; Mittal, N.; Kumar, R. Parametric Optimization of Fused Deposition Modeling Using Learning Enthusiasm Enabled Teaching Learning Based Algorithm. SN Appl. Sci. 2020, 2(12), 1978. DOI: https://doi.org/10.1007/s42452-020-03818-4.
- Fountas, N. A.; Kitsakis, K.; Aslani, K.-E.; Kechagias, J. D.; Vaxevanidis, N. M. An Experimental Investigation of Surface Roughness in 3D-Printed PLA Items Using Design of Experiments. Proc. Inst. Mech. Eng. J: J. Eng. Tribol. 2021, 135065012110593. DOI: https://doi.org/10.1177/13506501211059306.
- Buj-Corral, I.; Bagheri, A.; Sivatte-Adroer, M. Effect of Printing Parameters on Dimensional Error, Surface Roughness and Porosity of FFF Printed Parts with Grid Structure. Polymers. 2021, 13(8), 1213. DOI: https://doi.org/10.3390/polym13081213.
- Huang, Q.; Zhang, J.; Sabbaghi, A.; Dasgupta, T. Optimal Offline Compensation of Shape Shrinkage for Three-Dimensional Printing Processes. IIE Trans. 2015, 47(5), 431–441. DOI: https://doi.org/10.1080/0740817X.2014.955599.
- Quarto, M.; Carminati, M.; D’Urso, G. Density and Shrinkage Evaluation of AISI 316L Parts Printed via FDM Process. Mater. Manuf. Process. 2021, 36(13), 1535–1543. DOI: https://doi.org/10.1080/10426914.2021.1905830.
- Kamio, T.; Hayashi, K.; Onda, T.; Takaki, T.; Shibahara, T.; Yakushiji, T.; Shibui, T.; Kato, H. Utilizing a Low-Cost Desktop 3D Printer to Develop a “One-stop 3D Printing Lab” for Oral and Maxillofacial Surgery and Dentistry Fields. 3D Print. Med. 2018, 4(1), 6. DOI: https://doi.org/10.1186/s41205-018-0028-5.