Investigation of Abrasive water jet machining parameters of Bismaleimide composites

References

• Kechagias, J.; Petropoulos, G.; Vaxevanidis, N. Application of Taguchi Design for Quality Characterization of Abrasive Water Jet Machining of TRIP Sheet steels.Int. J. Adv. Manuf. Technol 2012, 62, 635–643. DOI: 10.1007/s00170-011-3815-3.
   Web of Science ®Google Scholar
• Kant, R.; Dhami, S. Investigating Process Parameters of Abrasive Water Jet Machine Using EN31. Mater. Manuf. Process. 2021, 36(14), 1597–1603. DOI: 10.1080/10426914.2021.1914849.
   Web of Science ®Google Scholar
• Naresh Babu, M.; Muthukrishnan, N. Investigation on Surface Roughness in Abrasive Water-Jet Machining by the Response Surface Method. Mater. Manuf. Process. 2014, 29(11–12), 1422–1428. DOI: 10.1080/10426914.2014.952020.
   Web of Science ®Google Scholar
• Ravi Kumar, K.; Soms, N.; Selvakumar, S.; Sreebalaji, V. S. Investigation and Optimization of Machining through Hole by Abrasive Water Jet Machining in AA6063/Bagasseash/TiN Hybrid Composites. Mater. Manuf. Process. 2021, 36(15), 1813–1827. DOI: 10.1080/10426914.2021.1954194.
   Web of Science ®Google Scholar
• Vigneshwaran, S.; Uthayakumar, M.; Arumugaprabu, V. Abrasive Water Jet Machining of Fiber-Reinforced Composite Materials. J. Reinf. Plast. Compos. 2018, 37(4), 230–237. DOI: 10.1177/0731684417740771.
   Web of Science ®Google Scholar
• Singh, K. K.; Thakur, R. K. Experimental Analysis on Carbon Nanotube Embedded GFRP Composites during AWJM. Mater. Manuf. Process. 2021, 1–11. DOI: 10.1080/10426914.2021.1960997.
   Google Scholar
• Arunkumar, K.; Murugarajan, A. Influence of Graphene Filler on Surface Quality of Hybrid Composite during AWJM. Mater. Manuf. Process. 2021, 36(11), 1248–1255. DOI: 10.1080/10426914.2021.1905836.
   Web of Science ®Google Scholar
• Doreswamy, D.; Shivamurthy, B.; Anjaiah, D.; Sharma, N. Y. An Investigation of Abrasive Water Jet Machining on Graphite/Glass/Epoxy Composite. Int. J. Manuf. Eng 2015, 2015, 1–11. DOI: 10.1155/2015/627218.
   Google Scholar
• Venkatesh, R.; Rao, V. S.; Ashwin Kannan, S.; Mullaikodi, S. M. Analysis and Optimization of Abrasive Water Jet Machining processes on the Hybrid Nano Particle Reinforced Aluminum Alloy Matrix Composite Material. IOP Conf. Ser. Mater. Sci. Eng. 2020, 923, 1. DOI: 10.1088/1757-899X/923/1/012037.
   Google Scholar
• Chakraborty, S.; Mitra, A. Parametric Optimization of Abrasive Water-Jet Machining Processes Using Grey Wolf Optimizer. Mater. Manuf. Process. 2018, 1–12. DOI: 10.1080/10426914.2018.1453158.
   Google Scholar
• Jani, S. P.; Kumar, A. S.; Khan, M. A.; Kumar, M. U. Machinablity of Hybrid Natural Fiber Composite with and without Filler as Reinforcement. Mater. Manuf. Process. 2016, 31(10), 1393–1399. DOI: 10.1080/10426914.2015.1117633.
   Web of Science ®Google Scholar
• Xiao, S.; Wang, P.; Gao, H.; Soulat, D. A Study of Abrasive Waterjet Multi-Pass Cutting on Kerf Quality of Carbon Fiber-Reinforced Plastics. Int. J. Adv. Manuf. Technol. 2019, 105(11), 4527–4537. DOI: 10.1007/s00170-018-3177-1.
   Web of Science ®Google Scholar
• Unde, P. D.; Gayakwad, M. D.; Patil, N. G.; Pawade, R. S.; Thakur, D. G.; Brahmankar, P. K. Experimental Investigations into Abrasive Waterjet Machining of Carbon Fiber Reinforced Plastic. J. Compos 2015, 2015, 1–9. DOI: 10.1155/2015/971596.
   Google Scholar
• Dhanawade, A.; Kumar, P.; Kumar, S. Experimental Study on Abrasive Water Jet Machining of Carbon Epoxy Composite. Adv. Mater. Process. Technol. 2020, 6(1), 40–53. DOI: 10.1080/2374068X.2019.1703338.
   Google Scholar
• Xu, J.; Huang, X.; Chen, M.; Paulo Davim, J. Drilling Characteristics of Carbon/Epoxy and Carbon/Polyimide Composites. Mater. Manuf. Process. 2020, 1732–1740. DOI: 10.1080/10426914.2020.1784935.
   Google Scholar
• Kim, D.; Ramulu, M. Drilling Process Optimization for Graphite/Bismaleimide-Titanium Alloy Stacks. Compos. Struct. 2004, 63(1), 101–114. DOI: 10.1016/S0263-8223(03)00137-5.
   Web of Science ®Google Scholar
• Hamatani, G.; Ramulu, M. Machinability of High Temperature Composites by Abrasive Waterjet. J. Eng. Mater. Technol. Trans. ASME 1990, 112(4), 381–386. DOI: 10.1115/1.2903346.
   Web of Science ®Google Scholar
• Ley, R. P. A Summary and Review of Composite Laminate. NASA Contract NAS1-19347. 1997, 22, 30.
   Google Scholar
• Rajesh, M.; Rajkumar, K.; Annamalai, V. E. Abrasive Water Jet Machining on Ti Metal-Interleaved Basalt-Flax Fiber Laminate. Mater. Manuf. Process. 2021, 36(3), 329–340. DOI: 10.1080/10426914.2020.1832692.
   Web of Science ®Google Scholar
• Jagadish, Gupta, K. Abrasive Water Jet Machining of Engineering Materials. Manuf and surf. 2020. DOI: 10.1007/978-3-030-36001-6_3.
   Google Scholar
• Natarajan, Y.; Murugesan, P. K.; Mohan, M.; Liyakath Ali Khan, S. A. Abrasive Water Jet Machining Process: A State of Art of Review. J. Manuf. Process. 2020, 49, 271–322. November 2019. DOI: 10.1016/j.jmapro.2019.11.030.
   Web of Science ®Google Scholar
• Kechagias, J. D.; Fountas, N. A.; Ninikas, K.; Petousis, M.; Vidakis, N.; Vaxevanidis, N. Surface Characteristics Investigation of 3D-printed PET-G Plates during CO2 Laser Cutting. Mater. Manuf. Process. 2021. DOI: 10.1080/10426914.2021.1981933.
   Google Scholar
• Doğankaya, E.; Kahya, M.; Özgür Ünver, H. Abrasive Water Jet Machining of UHMWPE and Trade-off Optimization. Mater. Manuf. Process. 2020, 35(12), 1339–1351. DOI: 10.1080/10426914.2020.1772486.
   Web of Science ®Google Scholar
• Selvam, R.; Karunamoorthy, L.; Arunkumar, N. Investigation on Performance of Abrasive Water Jet in Machining Hybrid Composites. Mater. Manuf. Process. 2017, 32(6), 700–706. DOI: 10.1080/10426914.2016.1198039.
   Web of Science ®Google Scholar
• Azmir, M. A.; Ahsan, A. K.; Rahmah, A. Effect of Abrasive Water Jet Machining Parameters on Aramid Fibre Reinforced Plastics Composite. Int. J. Mater. Form. 2009, 2(1), 37–44. DOI: 10.1007/s12289-008-0388-2.
   Web of Science ®Google Scholar
• Yuvaraj, N.; Kumar, M. P. Investigation of Process Parameters Influence in Abrasive Water Jet Cutting of D2 Steel. Mater. Manuf. Process. 2017, 32(2), 151–161. DOI: 10.1080/10426914.2016.1176183.
   Web of Science ®Google Scholar