References
- Dhar, N. R.; Kamruzzaman, M., and Ahmed, M. Effect of Minimum Quantity Lubrication (MQL) on Tool Wear and Surface Roughness in Turning AISI-4340 Steel. J. Mater. Process. Technol. 2006, 172, 299–304 https://doi.org/https://doi.org/10.1016/j.jmatprotec.2005.09.022.
- Weinert, K.; Inasaki, I.; Sutherland, J. W., and Wakabayashi, T. Dry Machining and Minimum Quantity Lubrication. CIRP Ann - Manuf Technol. 2004, 53(2), 511–537. https://doi.org/https://doi.org/10.1016/S0007-8506(07)60027-4 .
- Sreejith, P. S., and Ngoi, B. K. A. Dry Machining: Machining of the Future. J. Mater. Process. Technol. 2000, 101, 287–291. https://doi.org/https://doi.org/10.1016/S0924-0136(00)00445-3 .
- Braga, D. U.; Diniz, A. E.; Miranda, G. W. A., and Coppini, N. L. Using a Minimum Quantity of Lubricant (MQL) and a Diamond Coated Tool in the Drilling of Aluminum–silicon Alloys. J. Mater. Process. Technol. 2002, 122, 127–138. https://doi.org/https://doi.org/10.1016/S0924-0136(01)01249-3 .
- Li, K.-M.; Steven, and Liang, Y. Performance Profiling of Minimum Quantity Lubrication in Machining. Int. J. Adv. Manu. Tech. 35, 226–233. 2007. https://doi.org/10.1007/s00170-006-0713-1.
- Kishawy, H. A.; Dumitrescu, M.; Ng, E. G.; Elbestawi, M. A. Effect of Coolant Strategy on Tool Performance, Chip Morphology and Surface Quality during High-speed Machining of A356 Aluminum Alloy. Int. J. Mach. Tools Manuf. 2005, 45, 219–227. DOI: https://doi.org/10.1016/J.IJMACHTOOLS.2004.07.003.
- Heinemann, R.; Hinduja, S.; Barrow, G.; Petuelli, G. Effect of MQL on the Tool Life of Small Twist Drills in Deep-hole Drilling. Int. J. Mach. Tools Manuf. 2006, 46, 1–6. DOI: https://doi.org/10.1016/J.IJMACHTOOLS.2005.04.003.
- Li, K.-M.; Lin, C.-P. Study on Minimum Quantity Lubrication in Micro-grinding. Int. J. Adv. Manu. Tech. 62, 99–105. DOI: https://doi.org/10.1007/s00170-011-3789-1.
- Lee, K.; Hwang, Y.; Cheong, S.; Choi, Y.; Kwon, L.; Lee, J.; Kim, S. H. Understandin G the Role of Nanoparticles in Nano-oil Lubrication, Tribol. Lett. 2009, 35, 127–131.
- Peng, D. X.; Kang, Y.; Hwang, R. M.; Shyr, S. S.; Chang, Y. P. Tribological Properties of Diamond and SiO2 Nanoparticles Added in Paraffin. Tribol. Int. 2009, 42, 911 7. DOI: https://doi.org/10.1016/J.TRIBOINT.2008.12.015.
- Nika, D. L.; Askerov, A. S.; Balandin, A. A. Anomalous Size Dependence of the Thermal Conductivity of Graphene Ribbon. Nano Lett. 2012, 12, 3238–3244. DOI: https://doi.org/10.1021/nl301230g.
- Jang, W.; Chen, Z.; Bao, W.; Lau, C. N.; Dames, C. Thickness-dependent Thermal Conductivity of Encased Graphene and Ultrathin Graphite. Nano Lett. 2010.10: 3909–3913, 2010. doi: https://doi.org/10.1021/nl101613u
- Chou, R.; Battez, A. H.; Cabello, J. J.; Viesca, J. L.; Osorio, A.; Sagastume, A. Tribological Behavior of Polyalphaolefin with the Addition of Nickel Nanoparticles. Tribol. Int. 2010, 43, 2327–2332. DOI: https://doi.org/10.1016/J.TRIBOINT.2010.08.006.
- Ramana, S. V.; Ramji, K.; Satyanarayana, B. Studies on the Behaviour of the Green Particulate Fluid Lubricant in Its Nano Regime When Machining AISI 1040 Steel. Proc. Inst. Mech. Eng. B J. Eng. Manuf. 2010, 224(10), 1491–1501. DOI: https://doi.org/10.1243/09544054JEM1862.
- Vamsi Krishna, P.; Srikant, R. R.; Nageswara Rao, D. Experimental Investigation on the Performance of Nanoboric Acid Suspensions in SAE-40 and Coconut Oil during Turning of AISI 1040 Steel. Int. J. Mach. Tools Manuf. 2010, 50, 911–916. DOI: https://doi.org/10.1016/J.IJMACHTOOLS.2010.06.001.
- Khandekar, S.; Sankar, M. R.; Agnihotri, V.; Ramkumar, J. Nano-Cutting Fluid for Enhancement of Metal Cutting Performance. Mater. Manuf. Process. 2012, 27, 963–967. DOI: https://doi.org/10.1080/10426914.2011.610078.
- Amrita, M.; Srikant, R.; Sitaramaraju, A.; Prasad, M.; Krishna, P. V. Experimental Investigations on Influence of Mist Cooling Using Nanofluids on Machining Parameters in Turning AISI 1040 Steel. Proc. Inst. Mech. Eng.J: J. Eng. Tribol. 2013, 227(12), 1334–1346. DOI: https://doi.org/10.1177/1350650113491934.
- Chan, C. Y.; Lee, W. B.; Wang, H. Enhancement of Surface Finish Using Water-miscible Nano-cutting Fluid in Ultra-precision Turning. Int. J. Mach. Tools Manuf. 2013, 73, 62–70. DOI: https://doi.org/10.1016/J.IJMACHTOOLS.2013.06.006.
- Amrita, M.; Srikant, R. R.; Sitaramaraju, A. V. Performance Evaluation of Nanographite-Based Cutting Fluid in Machining Process. Mater. Manuf. Process. 2014, 29, 600–605. DOI: https://doi.org/10.1080/10426914.2014.893060.
- Khalil, A. N. M.; Ali, M. A. M.; Azmi, A. I. Effect of Al2O3 Nanolubricant with SDBS on Tool Wear during Turning Process of AISI 1050 with Minimal Quantity Lubricant. Procedia Manuf. 2015, 2, 130–134. DOI: https://doi.org/10.1016/J.PROMFG.2015.07.023.
- Padmini, R.; Krishna, P. V.; Mohana Rao, G. K. Experimental Evaluation of Nano-molybdenum Disulphide and Nano-boric Acid Suspensions in Vegetable Oils as Prospective Cutting Fluids during Turning of AISI 1040 Steel. Proc of the Inst of Mech Eng, Part J: Journal of Eng. Tribo 2016, 230(5), 493–505. DOI: https://doi.org/10.1177/1350650115601694.
- Su, Y.; Gong, L.; Li, B.; Liu, Z.; Chen, D. Performance Evaluation of Nanofluid MQL with Vegetable-based Oil and Ester Oil as Base Fluids in Turning. Int. J. Adv. Manuf. Technol. 2016, 83, 2083–2089. DOI: https://doi.org/10.1007/s00170-015-7730-x.
- Chetan, B. B. C.; Ghosh, S.; V, R. P. Application of Nanofluids during Minimum Quantity Lubrication: A Case Study in Turning Process. Tribol. Int. 2016, 101, 234–246. DOI: https://doi.org/10.1016/j.triboint.2016.04.019.
- Padmini, R.; Vamsi Krishna, P.; Krishna Mohana Rao, G. Effectiveness of Vegetable Oil Based Nanofluids as Potential Cutting Fluids in Turning AISI 1040 Steel. Tribol. Int. 2016, 94, 490–501. DOI: https://doi.org/10.1016/j.triboint.2015.10.006.
- Rajmohan, T.; Sathishkumar, S. D., and Palanikumar, K. Effect of a Nanoparticle-filled Lubricant in Turning of AISI 316L Stainless Steel (SS). Particulate Science and Technology . 2017, 35, 201–208. DOI: https://doi.org/10.1080/02726351.2016.1146812.
- Sharma, A. K.; Singh, R. K.; Dixit, A. R.; Tiwari, A. K. Characterization and Experimental Investigation of Al2O3 Nanoparticle Based Cutting Fluid in Turning of AISI 1040 Steel under Minimum Quantity Lubrication (MQL). Mater. Today Proc. 2016, 3, 1899–1906. DOI: https://doi.org/10.1016/j.matpr.2016.04.090.
- Gupta, M. K.; Sood, P. K. Surface Roughness Measurements in NFMQL Assisted Turning of Titanium Alloys: An Optimization Approach. Friction. 2017, 5, 155–170. DOI: https://doi.org/10.1007/s40544-017-0141-2.
- Mahboob Ali, M. A.; Azmi, A. I.; Mohd Khalil, A. N.; Leong, K. W. Experimental Study on Minimal Nanolubrication with Surfactant in the Turning of Titanium Alloys. Int. J. Adv. Manuf. Technol. 2017, 92, 117–127. DOI: https://doi.org/10.1007/s00170-017-0133-4.
- Sahu, N. K.; Andhare, A. B.; Raju, R. A. Evaluation of Performance of Nanofluid Using Multiwalled Carbon Nanotubes for Machining of Ti–6AL–4V. Mach. Sci. Technol. 2018, 22, 476–492. DOI: https://doi.org/10.1080/10910344.2017.1365898.
- Sekhar, K. C.; Rama Reddy, V. V.; Srikiran, S.; Daniel, M.; Kumar, S. Investigating the Effect of Nano Crystalline MoS2 Particles on the Surface Integrity of Turned Components. Mater. Today Proc. 2017, 4, 7527–7532. DOI: https://doi.org/10.1016/j.matpr.2017.07.084.
- Sharma, A. K.; Tiwari, A. K.; Dixit, A. R.; Singh, R. K. Investigation into Performance of SiO2 Nanoparticle Based Cutting Fluid in Machining Process. Mater. Today Proc. 2017, 4, 133–141. DOI: https://doi.org/10.1016/j.matpr.2017.01.006.
- Gutnichenko, O.; Bushlya, V.; Bihagen, S.; Ståhl, J. E. Influence of GnP Additive to Vegetable Oil on Machining Performance When MQL-assisted Turning Alloy 718. Procedia Manuf. 2018, 25, 330–337. DOI: https://doi.org/10.1016/j.promfg.2018.06.091.
- Hegab, H.; Kishawy, H. A.; Gadallah, M. H.; Umer, U.; Deiab, I. On Machining of Ti-6Al-4V Using Multi-walled Carbon Nanotubes-based Nano-fluid under Minimum Quantity Lubrication. Int. J. Adv. Manuf. Technol. 2018, 97, 1593–1603. DOI: https://doi.org/10.1007/s00170-018-2028-4.
- Hegab, H.; Umer, U.; Soliman, M.; Kishawy, H. A. Effects of Nano-cutting Fluids on Tool Performance and Chip Morphology during Machining Inconel 718. Int. J. Adv. Manuf. Technol. 2018, 96, 3449–3458. DOI: https://doi.org/10.1007/s00170-018-1825-0.
- Kishore Joshi, K.; Behera, R. K.; Anurag. Effect of Minimum Quantity Lubrication with Al2O3 Nanofluid on Surface Roughness and Its Prediction Using Hybrid Fuzzy Controller in Turning Operation of Inconel 600. Mater. Today Proc. 2018, 5, 20660–20668. DOI: https://doi.org/10.1016/j.matpr.2018.06.449.
- Mohd Khalil, A. N.; Azmi, A. I.; Murad, M. N.; Mahboob Ali, M. A. The Effect of Cutting Parameters on Cutting Force and Tool Wear in Machining Nickel Titanium Shape Memory Alloy ASTM F2063 under Minimum Quantity Nanolubricant. Procedia CIRP. 2018, 77, 227–230. DOI: https://doi.org/10.1016/j.procir.2018.09.002.
- Ukamanal, M.; Chandra Mishra, P.; Kumar Sahoo, A. Temperature Distribution during AISI 316 Steel Turning under TiO2-water Based Nanofluid Spray Environments. Mater. Today Proc. 2018, 5, 20741–20749. DOI: https://doi.org/10.1016/j.matpr.2018.06.459.
- Ali, M. A. M.; Azmi, A. I.; Murad, M. N.; Zain, M. Z. M.; Khalil, A. N. M.; Shuaib, N. A. Roles of New Bio-based Nanolubricants Towards Eco-friendly and Improved Machinability of Inconel 718 Alloys. Tribol. Int. 2020, 144, 106106. DOI: https://doi.org/10.1016/j.triboint.2019.106106.
- Anand, N.; Kumar, A. S.; Paul, S. Effect of Cutting Fluids Applied in MQCL Mode on Machinability of Ti-6Al-4V. J. Manuf. Process. 2019, 43, 154–163. DOI: https://doi.org/10.1016/j.jmapro.2019.05.029.
- Das, A.; Patel, S. K.; Das, S. R. Performance Comparison of Vegetable Oil Based Nanofluids Towards Machinability Improvement in Hard Turning of HSLA Steel Using Minimum Quantity Lubrication. Mech Ind 2019; 20. https://doi.org/10.1051/meca/2019036.
- Das, A.; Patel, S. K.; Biswal, B. B.; Sahoo, N., and Pradhan, A. Performance Evaluation of Various Cutting Fluids Using MQL Technique in Hard Turning of AISI 4340 Alloy Steel. Meas. J. Int. Meas. Confed. 2020, 150, 107079. DOI: https://doi.org/10.1016/j.measurement.2019.107079.
- Naresh Babu, M.; Anandan, V.; Muthukrishnan, N.; Arivalagar, A. A.; Dinesh Babu, M. Evaluation of Graphene Based Nano Fluids with Minimum Quantity Lubrication in Turning of AISI D3 Steel. SN Appl. Sci. 2019, 1. DOI: https://doi.org/10.1007/s42452-019-1182-0.
- Gajrani, K. K.; Suvin, P. S.; Kailas, S. V.; Mamilla, R. S. Thermal, Rheological, Wettability and Hard Machining Performance of MoS2 and CaF2 Based Minimum Quantity Hybrid Nano-green Cutting Fluids. J. Mater. Process. Technol. 2019, 266, 125–139. DOI: https://doi.org/10.1016/j.jmatprotec.2018.10.036.
- Kishawy, H. A.; Hegab, H.; Deiab, I.; Eltaggaz, A. Sustainability Assessment during Machining Ti-6Al-4V with Nano-additives-based Minimum Quantity Lubrication. J. Manuf. Mater. Process 2019; 3. https://doi.org/10.3390/jmmp3030061.
- Khajehzadeh, M.; Moradpour, J.; Razfar, M. R. Influence of Nanolubricant Particles’ Size on Flank Wear in Hard Turning. Mater. Manuf. Process. 2019, 34, 494–501. DOI: https://doi.org/10.1080/10426914.2019.1566619.
- Krishna Kanth, V.; Sreeramulu, D.; Srikiran, S.; Pradeep Kumar, M.; Jagdeesh, K. E.; Govindh, B. Experimental Investigation of Cutting Parameters Using Nano Lubrication on Turning AISI 1040 Steel. Mater. Today Proc. 2019, 18, 2095–2101. DOI: https://doi.org/10.1016/j.matpr.2019.06.323.
- Kumar, R.; Sahoo, A. K.; Mishra, P. C.; Das, R. K. Influence of Al2O3 and TiO2 Nanofluid on Hard Turning Performance. Int. J. Adv. Manuf. Technol. 2020, 106, 2265–2280. DOI: https://doi.org/10.1007/s00170-019-04754-3.
- Duc, T. M.; Long, T. T.; Chien, T. Q. Performance Evaluation of MQL Parameters Using Al2O3 and MoS2 Nanofluids in Hard Turning 90CrSi Steel. Lubricants. 2019, 7. DOI: https://doi.org/10.3390/lubricants7050040.
- Musavi, S. H.; Davoodi, B.; Niknam, S. A. Effects of Reinforced Nanoparticles with Surfactant on Surface Quality and Chip Formation Morphology in MQL-turning of Superalloys. J. Manuf. Process. 2019, 40, 128–139. DOI: https://doi.org/10.1016/j.jmapro.2019.03.014.
- Naresh Babu, M.; Anandan, V.; Muthukrishnan, N. Analysis of EN24 Steel in Turning Process with Copper Nanofluids under Minimum Quantity Lubrication. J. Brazilian Soc. Mech. Sci. Eng. 2019, 41, 1–13. DOI: https://doi.org/10.1007/s40430-019-1606-1.
- Padmini, R.; Vamsi Krishna, P.; Mahith, S.; Kumar, S. Influence of Green Nanocutting Fluids on Machining Performance Using Minimum Quantity Lubrication Technique. Mater. Today Proc. 2019, 18, 1435–1449. DOI: https://doi.org/10.1016/j.matpr.2019.06.612.
- Ramanjaneyulu, S.; Suman, K. N. S.; Srikiran, S., and Phani Kumar, S. Effect of Amalgamation of Al2O3 and Mustard Oil Nanofluids in the Machining of EN8 (Springer, Singapore.). 2019, 555–569. doi:https://doi.org/10.1007/978-981-13-7643-6_45
- Rahman, S. S.; Ashraf, M. Z. I.; Amin, A. N.; Bashar, M. S.; Ashik, M. F. K.; Kamruzzaman, M. Tuning Nanofluids for Improved Lubrication Performance in Turning Biomedical Grade Titanium Alloy. J. Clean. Prod. 2019, 206, 180–196. DOI: https://doi.org/10.1016/j.jclepro.2018.09.150.
- Shuang, Y.; John, M.; Songlin, D. Experimental Investigation on the Performance and Mechanism of Graphene Oxide Nanofluids in Turning Ti-6Al-4V. J. Manuf. Process. 2019, 43, 164–174. DOI: https://doi.org/10.1016/j.jmapro.2019.05.005.
- Singh, R.; Dureja, J. S.; Dogra, M.; Gupta, M. K.; Mia, M. Influence of Graphene-enriched Nanofluids and Textured Tool on Machining Behavior of Ti-6Al-4V Alloy. Int. J. Adv. Manuf. Technol. 2019, 105, 1685–1697. DOI: https://doi.org/10.1007/s00170-019-04377-8.
- Singh, R.; Dureja, J. S.; Dogra, M.; Gupta, M. K.; Mia, M.; Song, Q. Wear Behavior of Textured Tools under Graphene-assisted Minimum Quantity Lubrication System in Machining Ti-6Al-4V Alloy. Tribol. Int. 2020, 145, 106183. DOI: https://doi.org/10.1016/j.triboint.2020.106183.
- Singh, R.; Dureja, J. S.; Dogra, M. Performance Evaluation of Textured Carbide Tools under Environment-friendly Minimum Quantity Lubrication Turning Strategies. J. Brazilian Soc. Mech. Sci. Eng. 2019, 41, 1–13. DOI: https://doi.org/10.1007/s40430-019-1586-1.
- Sivaraman, V.; Prakash, S. Performance and Evaluation of MoS2 Based Machining Using PVD-TiAlN Coated Tool. J. Mech. Sci. Technol. 2019, 33, 4383–4388. DOI: https://doi.org/10.1007/s12206-019-0834-8.
- Talib, N.; Sani, A. S. A.; Hamzah, N. A. Modified Jatropha Nano-lubricant as Metalworking Fluid for Machining Process. J. Tribol. 2019, 23, 90–96.
- Thakur, A.; Manna, A.; Samir, S. Multi-Response Optimization of Turning Parameters during Machining of EN-24 Steel with SiC Nanofluids Based Minimum Quantity Lubrication. Silicon. 2020, 12, 71–85. DOI: https://doi.org/10.1007/s12633-019-00102-y.
- Yıldırım, Ç. V.; Sarıkaya, M.; Kıvak, T.; Şirin, Ş. The Effect of Addition of hBN Nanoparticles to nanofluid-MQL on Tool Wear Patterns, Tool Life, Roughness and Temperature in Turning of Ni-based Inconel 625. Tribol. Int. 2019, 134, 443–456. DOI: https://doi.org/10.1016/j.triboint.2019.02.027.
- Gupta, M. K.; Mia, M.; Pruncu, C. I.; Khan, A. M.; Rahman, M. A.; Jamil, M., Sharma, V. S. Modeling and Performance Evaluation of Al2O3, MoS2 and Graphite Nanoparticle-assisted MQL in Turning Titanium Alloy: An Intelligent Approach. J. Brazilian Soc. Mech. Sci. Eng. 2020, 42. DOI: https://doi.org/10.1007/s40430-020-2256-z.
- Kumar Mishra, S.; Ghosh, S.; Aravindan, S. Machining Performance Evaluation of Ti6Al4V Alloy with Laser Textured Tools under MQL and nano-MQL Environments. J. Manuf. Process. 2020, 53, 174–189. DOI: https://doi.org/10.1016/j.jmapro.2020.02.014.
- Venkatesan, K.; Devendiran, S.; Nishanth Purusotham, K.; Praveen, V. S. Study of Machinability Performance of Hastelloy-X for Nanofluids, Dry with Coated Tools. Mater. Manuf. Process. 2020, 35, 751–761. DOI: https://doi.org/10.1080/10426914.2020.1729990.
- Sharma, A. K.; Tiwari, A. K.; Dixit, A. R.; Singh, R. K.; Singh, M. Novel Uses of Alumina/graphene Hybrid Nanoparticle Additives for Improved Tribological Properties of Lubricant in Turning Operation. Tribol. Int. 2018, 119, 99–111. DOI: https://doi.org/10.1016/j.triboint.2017.10.036.
- Sharma, A. K.; Singh, R. K.; Dixit, A. R.; Tiwari, A. K. Novel Uses of alumina-MoS2 Hybrid Nanoparticle Enriched Cutting Fluid in Hard Turning of AISI 304 Steel. J. Manuf. Process. 2017, 30, 467–482. DOI: https://doi.org/10.1016/j.jmapro.2017.10.016.
- Singh, R. K.; Sharma, A. K.; Dixit, A. R.; Tiwari, A. K.; Pramanik, A.; Mandal, A. Performance Evaluation of Alumina-graphene Hybrid Nano-cutting Fluid in Hard Turning. J. Clean. Prod. 2017, 162, 830–845. DOI: https://doi.org/10.1016/j.jclepro.2017.06.104.
- Jamil, M.; Khan, A. M.; Hegab, H.; Gong, L.; Mia, M.; Gupta, M. K., He, N. Effects of Hybrid Al2O3-CNT Nanofluids and Cryogenic Cooling on Machining of Ti–6Al–4V. Int. J. Adv. Manuf. Technol. 2019, 102, 3895–3909. DOI: https://doi.org/10.1007/s00170-019-03485-9.
- Thakur, A.; Manna, A.; Samir, S. Experimental Investigation of Nanofluids in Minimum Quantity Lubrication during Turning of EN-24 Steel. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 2020, 234, 712–729. DOI: https://doi.org/10.1177/1350650119878286.
- Thakur, A.; Manna, A.; Samir, S. Performance Evaluation of Different Environmental Conditions on Output Characteristics during Turning of EN-24 Steel. Int. J. Precis. Eng. Manuf. 2019, 20, 1839–1849. DOI: https://doi.org/10.1007/s12541-019-00179-w.
- Yıldırım, Ç. V. Experimental Comparison of the Performance of Nanofluids, Cryogenic and Hybrid Cooling in Turning of Inconel 625. Tribol. Int. 2019, 137, 366–378. DOI: https://doi.org/10.1016/j.triboint.2019.05.014.
- Khan, A. M.; Gupta, M. K.; Hegab, H.; Jamil, M.; Mia, M.; He, N., Song, Q., Liu, Z., Pruncu, C. Energy-based Cost Integrated Modelling and Sustainability Assessment of Al-GnP Hybrid Nanofluid Assisted Turning of AISI52100 Steel. J. Clean. Prod. 2020, 257, 120502. DOI: https://doi.org/10.1016/j.jclepro.2020.120502.
- Khan, A. M.; Jamil, M.; Mia, M.; He, N.; Zhao, W.; Gong, L. Sustainability-based Performance Evaluation of Hybrid Nanofluid Assisted Machining. J. Clean. Prod. 2020, 257, 120541. DOI: https://doi.org/10.1016/j.jclepro.2020.120541.
- Kumar Sharma, A.; Kumar Tiwari, A.; Rai Dixit, A.; Kumar Singh, R. Measurement of Machining Forces and Surface Roughness in Turning of AISI 304 Steel Using alumina-MWCNT Hybrid Nanoparticles Enriched Cutting Fluid. Meas. J. Int. Meas. Confed. 2020, 150, 107078. DOI: https://doi.org/10.1016/j.measurement.2019.107078.
- Sharma, A. K.; Katiyar, J. K.; Bhaumik, S.; Roy, S. Influence of alumina/MWCNT Hybrid Nanoparticle Additives on Tribological Properties of Lubricants in Turning Operations. Friction. 2019, 7, 153–168. DOI: https://doi.org/10.1007/s40544-018-0199-5.
- Sarhan, A. A. D.; Sayuti, M.; Hamdi, M. Reduction of Power and Lubricant Oil Consumption in Milling Process Using a New SiO2 Nanolubrication System. Int. J. Adv. Manuf. Technol. 2012, 63, 505–512. DOI: https://doi.org/10.1007/s00170-012-3940-7.
- Sayuti, M.; Sarhan, A. A. D.; Hamdi, M. An Investigation of Optimum SiO2 Nanolubrication Parameters in End Milling of Aerospace Al6061-T6 Alloy. Int. J. Adv. Manuf. Technol. 2013, 67, 833–849. DOI: https://doi.org/10.1007/s00170-012-4527-z.
- Sayuti, M.; Erh, O. M.; Sarhan, A. A. D.; Hamdi, M. Investigation on the Morphology of the Machined Surface in End Milling of Aerospace AL6061-T6 for Novel Uses of SiO2 Nanolubrication System. J. Clean. Prod. 2014, 66, 655–663. DOI: https://doi.org/10.1016/J.JCLEPRO.2013.11.058.
- Sayuti, M.; Sarhan, A. A. D.; Tanaka, T.; Hamdi, M.; Saito, Y. Cutting Force Reduction and Surface Quality Improvement in Machining of Aerospace Duralumin AL-2017-T4 Using Carbon Onion Nanolubrication System. Int. J. Adv. Manuf. Technol. 2013, 65, 1493–1500. DOI: https://doi.org/10.1007/s00170-012-4273-2.
- Rahmati, B.; Sarhan, A. A. D.; Sayuti, M. Investigating the Optimum Molybdenum Disulfide (Mos2) Nanolubrication Parameters in CNC Milling of AL6061-T6 Alloy. Int. J. Adv. Manuf. Technol. 2014, 70, 1143–1155. DOI: https://doi.org/10.1007/s00170-013-5334-x.
- Rahmati, B.; Sarhan, A.; Sayuti, M.; Lumpur, K. Malaysia Morphology of Surface Generated by End Milling AL6061-T6 Using Molybdenum Disulfide (Mos 2) Nanolubrication in End Milling Machining. J. Clean. Prod. 2014, 66, 685–691. DOI: https://doi.org/10.1016/j.jclepro.2013.10.048.
- Erh, O.; Sayuti, M.; Sarhan, A. Fuzzy Logic-based Approach to Investigate the Novel Uses of Nano Suspended Lubrication in Precise Machining of Aerospace AL Tempered Grade 6061. J. Clean. Prod. 2015, 89, 286–295. DOI: https://doi.org/10.1016/j.jclepro.2014.11.006.
- Huang, W.-T.; Wu, D.-H.; Lin, S.-P.; Liu, W.-S. A Combined Minimum Quantity Lubrication and MWCNT Cutting Fluid Approach for SKD 11 End Milling. Int. J. Adv. Manuf. Technol. 2016, 84, 1697–1704. DOI: https://doi.org/10.1007/s00170-015-7770-2.
- Muthusamy, Y.; Kadirgama, K.; Rahman, M. M.; Ramasamy, D.; Sharma, K. V. Wear Analysis When Machining AISI 304 with Ethylene glycol/TIO2 Nanoparticle-based Coolant. Int. J. Adv. Manuf. Technol. 2016, 82, 327–340. DOI: https://doi.org/10.1007/s00170-015-7360-3.
- NikPa, N. M.; Sarhan, A. A. D.; Abdelnaeim Hassan, M.; Hamdi Abd Shukor, M. Novel Uses of SiO2 Nanolubrication in End Milling of Medium Carbon Steel for Higher Compressive Residual Stress Measured by High-energy X-ray Diffraction Data. Proc. of the Inst. of Mech. Eng., Part J: Journal of Eng. Tribology. 230(6):697–708. https://doi.org/10.1177/1350650115611157.
- Masmiati, N.; Sarhan, A. A. D.; Hassan, M. A. N.; Hamdi, M. Optimization of Cutting Conditions for Minimum Residual Stress, Cutting Force and Surface Roughness in End Milling of S50C Medium Carbon Steel. Measurement. 2016, 86, 253–265. DOI: https://doi.org/10.1016/j.measurement.2016.02.049.
- Najiha, M. S.; Rahman, M. M. Experimental Investigation of Flank Wear in End Milling of Aluminum Alloy with Water-based TiO2 Nanofluid Lubricant in Minimum Quantity Lubrication Technique. Int. J. Adv. Manuf. Technol. 2016, 86, 2527–2537. DOI: https://doi.org/10.1007/s00170-015-8256-y.
- Kim, J. S.; Kim, J. W.; Lee, S. W. Experimental Characterization on Micro-end Milling of Titanium Alloy Using Nanofluid Minimum Quantity Lubrication with Chilly Gas. Int. J. Adv. Manuf. Technol. 2017, 91, 2741–2749. DOI: https://doi.org/10.1007/s00170-016-9965-6.
- Minh, D. T.; The, L. T.; Bao, N. T. Performance of Al2O3 Nanofluids in Minimum Quantity Lubrication in Hard Milling of 60Si2Mn Steel Using Cemented Carbide Tools. Adv. Mech. Eng. 2017, 9, 1687814017710618. DOI: https://doi.org/10.1177/1687814017710618.
- Park, K.-H.; Suhaimi, M. A.; Yang, G.-D.; Lee, D.-Y.; Lee, S.-W.; Kwon, P. Milling of Titanium Alloy with Cryogenic Cooling and Minimum Quantity Lubrication (MQL). Int. J. Precis. Eng. Manuf. 2017, 18, 5–14. DOI: https://doi.org/10.1007/s12541-017-0001-z.
- Bai, X.; Li, C.; Dong, L.; Yin, Q. Experimental Evaluation of the Lubrication Performances of Different Nanofluids for Minimum Quantity Lubrication (MQL) in Milling Ti-6Al-4V. Int. J. Adv. Manuf. Technol. 2019, 101, 2621–2632. DOI: https://doi.org/10.1007/s00170-018-3100-9.
- Nghiep, T. N.; Sarhan, A. A. D.; Aoyama, H. Analysis of Tool Deflection Errors in Precision CNC End Milling of Aerospace Aluminum 6061-T6 Alloy. Measurement. 2018, 125, 476–495. DOI: https://doi.org/10.1016/j.measurement.2018.05.011.
- Yin, Q.; Li, C.; Zhang, Y.; Yang, M.; Jia, D., and Hou, Y. Spectral Analysis and Power Spectral Density Evaluation in Al2O3 Nanofluid Minimum Quantity Lubrication Milling of 45 Steel. Int. J. Adv. Manuf. Technol. 2018, 97, 129–145. DOI: https://doi.org/10.1007/s00170-018-1942-9.
- Khan, A. M.; Jamil, M.; Salonitis, K.; Sarfraz, S.; Zhao, W.; He, N., MIa, M., Zhao, G. Multi-Objective Optimization of Energy Consumption and Surface Quality in Nanofluid SQCL Assisted Face Milling. Energies. 2019, 12. DOI: https://doi.org/10.3390/en12040710.
- Dong, L.; Li, C.; Bai, X.; Zhai, M.; Qi, Q.; Yin, Q., et al. Analysis of the Cooling Performance of Ti–6Al–4V in Minimum Quantity Lubricant Milling with Different Nanoparticles. Int. J. Adv. Manuf. Technol. 2019, 103, 2197–2206. DOI: https://doi.org/10.1007/s00170-019-03466-y.
- Kulkarni, H. B.; Nadakatti, M. M.; Kulkarni, S. C.; Kulkarni, R. M. Investigations on Effect of Nanofluid Based Minimum Quantity Lubrication Technique for Surface Milling of Al7075-T6 Aerospace Alloy. Mater. Today Proc. 2020, 27, 251–256. DOI: https://doi.org/10.1016/j.matpr.2019.10.127.
- Peña-Parás, L.; Maldonado-Cortés, D.; Rodríguez-Villalobos, M.; Romero-Cantú, A. G.; Montemayor, O. E. Enhancing Tool Life, and Reducing Power Consumption and Surface Roughness in Milling Processes by Nanolubricants and Laser Surface Texturing. J. Clean. Prod. 2020, 253, 119836. DOI: https://doi.org/10.1016/j.jclepro.2019.119836.
- Peña-Parás, L.; Maldonado-Cortés, D.; Rodríguez-Villalobos, M.; Romero-Cantú, A. G.; Montemayor, O. E.; Herrera, M., Trousselle, G., González, J., Hugler, W. Optimization of Milling Parameters of 1018 Steel and Nanoparticle Additive Concentration in Cutting Fluids for Enhancing Multi-response Characteristics. Wear 2019, 426–427, 877–886. DOI: https://doi.org/10.1016/j.wear.2019.01.078.
- Li, M.; Yu, T.; Yang, L.; Li, H.; Zhang, R.; Wang, W. Parameter Optimization during Minimum Quantity Lubrication Milling of TC4 Alloy with Graphene-dispersed Vegetable-oil-based Cutting Fluid. J. Clean. Prod. 2019, 209, 1508–1522. DOI: https://doi.org/10.1016/j.jclepro.2018.11.147.
- Lv, T.; Huang, S.; Liu, E.; Ma, Y.; Xu, X. Tribological and Machining Characteristics of an Electrostatic Minimum Quantity Lubrication (EMQL) Technology Using Graphene Nano-lubricants as Cutting Fluids. J. Manuf. Process. 2018, 34, 225–237. DOI: https://doi.org/10.1016/j.jmapro.2018.06.016.
- Zhou, C.; Guo, X.; Zhang, K.; Cheng, L.; Wu, Y. The Coupling Effect of Micro-groove Textures and Nanofluids on Cutting Performance of Uncoated Cemented Carbide Tools in Milling Ti-6Al-4V. J. Mater. Process. Technol. 2019, 271, 36–45. DOI: https://doi.org/10.1016/j.jmatprotec.2019.03.021.
- Xu, X.; Lv, T.; Luan, Z.; Zhao, Y.; Wang, M.; Hu, X. Capillary Penetration Mechanism and Oil Mist Concentration of Al2O3 Nanoparticle Fluids in Electrostatic Minimum Quantity Lubrication (EMQL) Milling. Int. J. Adv. Manuf. Technol. 2019, 104, 1937–1951. DOI: https://doi.org/10.1007/s00170-019-04023-3.
- Şirin, Ş.; Kıvak, T. Performances of Different Eco-friendly Nanofluid Lubricants in the Milling of Inconel X-750 Superalloy. Tribol. Int. 2019, 137, 180–192. DOI: https://doi.org/10.1016/j.triboint.2019.04.042.
- Cetin, M. H.; Kabave Kilincarslan, S. Effects of Cutting Fluids with Nano-silver and Borax Additives on Milling Performance of Aluminium Alloys. J. Manuf. Process. 2020, 50, 170–182. DOI: https://doi.org/10.1016/j.jmapro.2019.12.042.
- Duan, Z.; Yin, Q.; Li, C.; Dong, L.; Bai, X.; Zhang, Y., Yang, M., Jia, D., Li, R., Liu, Z. Milling Force and Surface Morphology of 45 Steel under Different Al2O3 Nanofluid Concentrations. Int. J. Adv. Manuf. Technol. 2020, 107, 1277–1296. DOI: https://doi.org/10.1007/s00170-020-04969-9.
- Sharmin, I.; Gafur, M. A.; Dhar, N. R. Preparation and Evaluation of a Stable CNT-water Based Nano Cutting Fluid for Machining Hard-to-cut Material. SN Appl. Sci. 2020, 2. DOI: https://doi.org/10.1007/s42452-020-2416-x.
- Sen, B.; Mia, M.; Mandal, U. K.; Mondal, S. P. Synergistic Effect of Silica and Pure Palm Oil on the Machining Performances of Inconel 690: A Study for Promoting Minimum Quantity Nano Doped-green Lubricants. J. Clean. Prod. 2020, 258, 120755. DOI: https://doi.org/10.1016/j.jclepro.2020.120755.
- Muaz, M.; Choudhury, S. K. Experimental Investigations and Multi-objective Optimization of MQL-assisted Milling Process for Finishing of AISI 4340 Steel. Measurement. 2019, 138, 557–569. DOI: https://doi.org/10.1016/j.measurement.2019.02.048.
- Soo, J.; Lee, P.; Won, S. International Journal of Machine Tools & Manufacture Experimental Characterization of Micro-drilling Process Using Nanofluid Minimum Quantity Lubrication. Int. J. Mach. Tools Manuf. 2011, 51, 649–652. DOI: https://doi.org/10.1016/j.ijmachtools.2011.04.005.
- Huang, W.; Wu, D., and Chen, J . Robust Design of Using nanofluid/MQL in Micro-drilling. Int. J. Adv. Manuf. Technol. 85, 2155–2161. 2016. https://doi.org/10.1007/s00170-015-7382-x.
- Soo, J.; Hoon, D.; Chung, H.; Won, S. Optimization of Environmentally Benign Micro-drilling Process with Nano Fl Uid Minimum Quantity Lubrication Using Response Surface Methodology and Genetic Algorithm. J. Clean. Prod. 2015, 102, 428–436. DOI: https://doi.org/10.1016/j.jclepro.2015.04.057.
- Nam, J.; Kim, J. W.; Kim, J. S.; Lee, J., and Lee, S. W. Parametric Analysis and Optimization of Nanofluid Minimum Quantity Lubrication Micro-drilling Process for Titanium Alloy (Ti-6al-4v) Using Response Surface Methodology and Desirability Function. Procedia Manuf. 2018, 26, 403–414. DOI: https://doi.org/10.1016/j.promfg.2018.07.048.
- Chai, Y. H.; Yusup, S.; Chok, V. S.; Arpin, M. T.; Irawan, S. Investigation of Thermal Conductivity of Multi Walled Carbon Nanotube Dispersed in Hydrogenated Oil Based Drilling Fluids. Appl. Therm. Eng. 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.07.017.
- Singh, S.; Pal, A., and Singh, T. Performance Evaluation of Aluminium 6063 Drilling under the in Fl Uence of Nano Fl Uid Minimum Quantity Lubrication. Journal of Cleaner Production . 2016, 137, 537–545. doi:https://doi.org/10.1016/j.jclepro.2016.07.139
- Mosleh, M.; Ghaderi, M.; Shirvani, K. A.; Belk, J.; Grzina, D. J. Performance of Cutting Nanofluids in Tribological Testing and Conventional Drilling. J. Manuf. Process. 2017, 25, 70–76. DOI: https://doi.org/10.1016/j.jmapro.2016.11.001.
- Salimi-yasar, H.; Zeinali, S., and Shanbedi, M. Tribology International in Fl Uence of Soluble Oil-based TiO 2 Nano Fl Uid on Heat Transfer Performance of Cutting Fl Uid. Tribology International. 2017, 112, 147–154. doi:https://doi.org/10.1016/j.triboint.2017.04.004
- Rosnan, R.; Nasir, M.; Iskandar, A., and Shyha, I. Tribology International Effects of Minimal Quantity Lubricants Reinforced with Nano-particles on the Performance of Carbide Drills for Drilling Nickel-titanium Alloys. Tribology International. Tribiology Int 2019, 136, 58–66. DOI: https://doi.org/10.1016/j.triboint.2019.03.029.
- Duc, T. M.; Long, T. T.; Van Thanh, D. Evaluation of Minimum Quantity Lubrication and Minimum Quantity Cooling Lubrication Performance in Hard Drilling of Hardox 500 Steel Using Al2O3 Nanofluid. Adv. Mech. Eng. 2014, 12, 1687814019888404. DOI: https://doi.org/10.1177/1687814019888404.
- Huang, W. T.; Liu, W. S., and Wu, D. H. Investigations into Lubrication in Grinding Processes Using MWCNTs Nano Fl Uids with Ultrasonic-assisted Dispersion. J. Clean. Prod. 137, 1553–1559. 2016. https://doi.org/10.1016/j.jclepro.2016.06.038.
- Li, B.; Li, C.; Zhang, Y.; Wang, Y.; Yang, M. Effect of the Physical Properties of Different Vegetable Oil-based Nanofluids on MQLC Grinding Temperature of Ni-based Alloy. Int. J. Adv. Manuf. Technol. 2016. DOI: https://doi.org/10.1007/s00170-016-9324-7.
- Manojkumar, K.; Ghosh, A. Assessment of Cooling-lubrication and Wettability Characteristics of Nano-engineered Sunflower Oil as Cutting Fluid and Its Impact on SQCL Grinding Performance. J. Mater. Process Tech. 2016. DOI: https://doi.org/10.1016/j.jmatprotec.2016.05.030.
- Molaie, M. M.; Akbari, J.; Movahhedy, M. R. Ultrasonic Assisted Grinding Process with Minimum Quantity Lubrication Using Oil-based Nano Fl Uids. J. Clean. Prod. 2016, 129, 212–222. DOI: https://doi.org/10.1016/j.jclepro.2016.04.080.
- Setti, D.; Ghosh, S., and Paruchuri, V. R. Influence of Nanofluid Application on Wheel Wear, Coefficient of Friction and Redeposition Phenomenon in Surface Grinding of Ti-6Al-4V Journal of Engineering Manufacture . 232, 128–140. 2018. DOI:https://doi.org/10.1177/0954405416636039.
- Wang, Y.; Li, C.; Zhang, Y.; Yang, M.; Zhang, X.; Zhang, N., Dai, J. Experimental Evaluation on Tribological Performance of the Wheel/workpiece Interface in Minimum Quantity Lubrication Grinding with Different Concentrations of Al2O3 Nanofluids. J. Clean. Prod. 2016. DOI: https://doi.org/10.1016/j.jclepro.2016.10.110.
- Wang, Y.; Li, C.; Zhang, Y.; Li, B.; Yang, M.; Zhang, X., Guo, S., Liu, G. Experimental Evaluation of the Lubrication Properties of the Wheel/workpiece Interface in MQL Grinding with Different Nanofluids. Tribol. Int. 2016, 99, 198–210. DOI: https://doi.org/10.1016/j.triboint.2016.03.023.
- Zhang, Y.; Li, C.; Yang, M.; Jia, D.; Wang, Y., Li, B., Hou, Y., Zhang, N., Wu, Q. Experimental Evaluation of Cooling Performance by Friction Coefficient and Specific Friction Energy in Nanofluid Minimum Quantity Lubrication Grinding with Different Types of Vegetable Oil. Vol 139, 685–705 . J Clean Prod 2016. https://doi.org/10.1016/j.jclepro.2016.08.073.
- Jia, A. D.; Li, C.; Zhang, Y.; Wang, Y.; Guo, S.; Cao, H. Specific Energy and Surface Roughness of Minimum Quantity Lubrication Grinding Ni-Based Alloy with Mixed Vegetable Oil-based Nanofluids. Precis. Eng. 2017. DOI: https://doi.org/10.1016/j.precisioneng.2017.05.012.
- Kumar, A.; Ghosh, S.; Aravindan, S. Grinding Performance Improvement of Silicon Nitride Ceramics by Utilizing Nanofluids. Ceram. Int. 2017, 43, 13411–13421. DOI: https://doi.org/10.1016/j.ceramint.2017.07.044.
- Li, B.; Li, C.; Zhang, Y.; Wang, Y.; Jia, D.; Yang, M., Zhang, N., Wu, Q., Han, Z., Sun, K. Heat Transfer Performance of MQL Grinding with Different Nanofluids for Ni-based Alloys Using Vegetable Oil. J. Clean. Prod. 2017, 154, 1–11. DOI: https://doi.org/10.1016/j.jclepro.2017.03.213.
- Li, B.; Li, C.; Zhang, Y.; Wang, Y.; Yang, M.; Jia, D., Zhang, N., Wu, Q., Ding, W. Numerical and Experimental Research on the Grinding Temperature of Minimum Quantity Lubrication Cooling of Different Workpiece Materials Using Vegetable Oil-based Nanofluids. Int. J. Adv. Manuf. Technol. 2017, 93, 1971–1988. DOI: https://doi.org/10.1007/s00170-017-0643-0.
- Paul, S.; Ghosh, A. Suitability of Aqueous MoS 2 Nanofluid for Small Quantity Cooling Lubrication – Assisted Diamond Grinding of WC-Co Cermets. Proc. IMechE Part B J. Eng. Manuf. 2017. DOI: https://doi.org/10.1177/0954405417739037.
- Pavan, R. B.; Venu Gopal, A.; Amrita, M.; Goriparthi, B. K. Experimental Investigation of Graphene Nanoplatelets–based Minimum Quantity Lubrication in Grinding Inconel 718. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2019, 233, 400–410. DOI: https://doi.org/10.1177/0954405417728311.
- Rabiei, F.; Rahimi, A. R.; Hadad, M. J.; Saberi, A. Experimental Evaluation of Coolant-lubricant Properties of Nanofluids in Ultrasonic Assistant MQL Grinding. Int. J. Adv. Manuf. Technol. 2017, 93, 3935–3953. DOI: https://doi.org/10.1007/s00170-017-0774-3.
- Rabiei, F.; Rahimi, A. R.; Hadad, M. J. Performance Improvement of Eco-friendly MQL Technique by Using Hybrid Nanofluid and Ultrasonic-assisted Grinding. Int. J. Adv. Manuf. Technol. 2017, 93, 1001–1015. DOI: https://doi.org/10.1007/s00170-017-0521-9.
- Sinha, M. K.; Madarkar, R.; Ghosh, S.; Rao, P. V. Application of Eco-friendly Nanofluids during Grinding of Inconel 718 through Small Quantity Lubrication. J. Clean. Prod. 2017, 141, 1359–1375. DOI: https://doi.org/10.1016/j.jclepro.2016.09.212.
- Choudhary, A.; Naskar, A.; Paul, S. An Investigation on Application of Nano-fluids in High Speed Grinding of Sintered Alumina. J. Manuf. Process. 2018, 35, 624–633. DOI: https://doi.org/10.1016/j.jmapro.2018.09.013.
- Hosseini, S. F.; Emami, M.; Sadeghi, M. H. An Experimental Investigation on the Effects of Minimum Quantity Nano Lubricant Application in Grinding Process of Tungsten Carbide. J. Manuf. Process. 2018, 35, 244–253. DOI: https://doi.org/10.1016/j.jmapro.2018.08.007.
- Jia, D.; Li, C.; Zhang, Y.; Yang, M.; Zhang, X.; Li, R., Ji, H. Experimental Evaluation of Surface Topographies of NMQL Grinding ZrO2 Ceramics Combining Multiangle Ultrasonic Vibration. Int. J. Adv. Manuf. Technol. 2019, 100, 457–473. DOI: https://doi.org/10.1007/s00170-018-2718-y.
- Lee, P. H.; Kim, J. W.; Lee, S. W. Experimental Characterization on Eco-friendly Micro-grinding Process of Titanium Alloy Using Air Flow Assisted Electrospray Lubrication with Nanofluid. J. Clean. Prod. 2018, 201, 452–462. DOI: https://doi.org/10.1016/j.jclepro.2018.07.307.
- Naskar, A.; Singh, B. B.; Choudhary, A.; Paul, S. Effect of Different Grinding Fluids Applied in Minimum Quantity Cooling-lubrication Mode on Surface Integrity in cBN Grinding of Inconel 718. J. Manuf. Process. 2018, 36, 44–50. DOI: https://doi.org/10.1016/j.jmapro.2018.09.023.
- Pashmforoush, F.; Delir Bagherinia, R. Influence of Water-based Copper Nanofluid on Wheel Loading and Surface Roughness during Grinding of Inconel 738 Superalloy. J. Clean. Prod. 2018, 178, 363–372. DOI: https://doi.org/10.1016/j.jclepro.2018.01.003.
- Zhang, Y.; Li, C.; Yang, M.; Jia, D.; Li, R.; Li, J. Analysis of Single-grain Interference Mechanics Based on Material Removal and Plastic Stacking Mechanisms in Nanofluid Minimum Quantity Lubrication Grinding. Procedia CIRP. 2018, 71, 116–121. DOI: https://doi.org/10.1016/j.procir.2018.05.082.
- Dambatta, Y. S.; Sayuti, M.; Sarhan, A. A. D.; Hamdi, M.; Manladan, S. M.; Reddy, M. Tribological Performance of SiO 2 -based Nanofluids in Minimum Quantity Lubrication Grinding of Si 3 N 4 Ceramic. J. Manuf. Process. 2019, 41, 135–147. DOI: https://doi.org/10.1016/j.jmapro.2019.03.024.
- Li, M.; Yu, T.; Zhang, R.; Yang, L.; Ma, Z.; Li, B., Wang, X. Z., Wang, W., Zhao, J. Experimental Evaluation of an Eco-friendly Grinding Process Combining Minimum Quantity Lubrication and Graphene-enhanced Plant-oil-based Cutting Fluid. J. Clean. Prod. 2020, 244. DOI: https://doi.org/10.1016/j.jclepro.2019.118747.
- Li, X.; Huang, S.; Wu, Y.; Huang, H. Performance Evaluation of Graphene Oxide Nanosheet Water Coolants in the Grinding of Semiconductor Substrates. Precis. Eng. 2019, 60, 291–298. DOI: https://doi.org/10.1016/j.precisioneng.2019.08.016.
- Lopes, J. C.; Garcia, M. V.; Volpato, R. S.; de Mello, H. J.; Ribeiro, F. S. F.; de Angelo Sanchez, L. E., de Oliveira Rocha, K., Neto, L. D., Aguiar, P. R., Bianchi, E. C. Application of MQL Technique Using TiO2 Nanoparticles Compared to MQL Simultaneous to the Grinding Wheel Cleaning Jet. Int. J. Adv. Manuf. Technol. 2020, 106, 2205–2218. DOI: https://doi.org/10.1007/s00170-019-04760-5.
- Nandakumar, A.; Rajmohan, T.; Vijayabhaskar, S. Experimental Evaluation of the Lubrication Performance in MQL Grinding of Nano SiC Reinforced Al Matrix Composites. Silicon. 2019, 11, 2987–2999. DOI: https://doi.org/10.1007/s12633-019-0088-1.
- Kumar, A.; Ghosh, S.; Aravindan, S. Experimental Investigations on Surface Grinding of Silicon Nitride Subjected to Mono and Hybrid Nano Fl Uids. Ceram. Int. 2019, 45, 17447–17466. DOI: https://doi.org/10.1016/j.ceramint.2019.05.307.
- Zhang, Y.; Li, C.; Jia, D.; Li, B.; Wang, Y., Yang, M., Hou, Y., Zhang, H. Experimental Study on the Effect of Nanoparticle Concentration on the Lubricating Property of Nanofluids for MQL Grinding of Ni-based Alloy Journal of Materials Processing Technology. 232, 100–115 . Elsevier B.V. 2016. DOI:https://doi.org/10.1016/j.jmatprotec.2016.01.031.
- Zhang, X.; Li, C.; Zhang, Y.; Jia, D., and Li, B. Performances of Al 2 O 3/SiC Hybrid Nanofluids in Minimum-quantity Lubrication Grinding. Int. J. Adv. Manuf. Technol. 86, 3427–3441. 2016.https://doi.org/10.1007/s00170-016-8453-3.
- Zhang, Y.; Li, C.; Jia, D.; Zhang, D.; Zhang, X. Experimental Evaluation of MoS2 Nanoparticles in Jet MQL Grinding with Different Types of Vegetable Oil as Base Oil. J. Clean. Prod. 2015, 87, 930–940. DOI: https://doi.org/10.1016/j.jclepro.2014.10.027.
- Singh, V.; Sharma, A. K.; Sahu, R. K.; Katiyar, J. K. Novel Application of Graphite-talc Hybrid Nanoparticle Enriched Cutting Fluid in Turning Operation. J. Manuf. Process. 2021, 62, 378–387. DOI: https://doi.org/10.1016/j.jmapro.2020.12.017.