Room temperature and high temperature micro-forming analysis of SS304 foil

References

• Mashalkar, A.; Kakandikar, G.; Nandedkar, V. Micro-Forming Analysis of Ultra-Thin Brass Foil. Mater. Manuf. Process. 2019, 34(13), 1509–1515. DOI: 10.1080/10426914.2019.1655158.
   Web of Science ®Google Scholar
• Tiwari, T.; Nag, A.; Dixit, A. R. Investigations on Bending of Micro-Thin Sheets Using Spark Discharges. Mater. Manuf. Process. 2020, 35(12), 1362–1371. DOI: 10.1080/10426914.2020.1772488.
   Web of Science ®Google Scholar
• Gau, J. T.; Teegala, S.; Huang, K. M.; Hsiao, T. J.; Lin, B. T. Using Micro Deep Drawing with Ironing Stages to Form Stainless Steel 304 Micro Cups. J. Manuf. Process. 2013, 15(2), 298–305. DOI: 10.1016/j.jmapro.2013.01.009.
   Web of Science ®Google Scholar
• Chen, C. H.; Gau, J. T.; Lee, R. S. An Experimental and Analytical Study on the Limit Drawing Ratio of Stainless Steel 304 Foils for Microsheet Forming. Mater. Manuf. Processes. 2009, 24, 1256–1265. DOI: 10.1080/10426910903129786.
   Web of Science ®Google Scholar
• Alo, O. A.; Otunniyi, I. O.; Pienaar, H. Z. Manufacturing Methods for Metallic Bipolar Plates for Polymer Electrolyte Membrane Fuel Cell. Mater. Manuf. Process. 2019, 34(8), 927–955. DOI: 10.1080/10426914.2019.1605170.
   Web of Science ®Google Scholar
• Sun, G. S.; Du, L. X.; Hu, J.; Xie, H.; Wu, H. Y.; Misra, R. D. K. Ultrahigh Strength Nano/Ultrafine-Grained 304 Stainless Steel through Three-Stage Cold Rolling and Annealing Treatment. Mater. Charact. 2015, 110, 228–235. DOI: 10.1016/j.matchar.2015.11.001.
   Web of Science ®Google Scholar
• Dakhlaoui, R.; Baczmański, A.; Braham, C.; Wroński, S.; Wierzbanowski, K.; Oliver, E. C. Effect of Residual Stresses on Individual Phase Mechanical Properties of Austeno-Ferritic Duplex Stainless Steel. Acta Mater. 2006, 54(19), 5027–5039. DOI: 10.1016/j.actamat.2006.06.035.
   Web of Science ®Google Scholar
• Colombo, T. C. A.; Rego, R.; de Faria, A. R.; Otubo, J. Processing-Induced Residual Stresses in TWIP Steel Weld Spots. Mater. Manuf. Process. 2020, 35(5), 572–578. DOI: 10.1080/10426914.2020.1734619.
   Web of Science ®Google Scholar
• Zhu, J.; Lin, Y.; Liu, S.; Ma, X.; Wang, G. Plasticity and Size Effects of Micro-Forming Sheet Processed by Electropulsing. Mater. Manuf. Process. 2020, 35(10), 1146–1155. DOI: 10.1080/10426914.2020.1772482.
   Web of Science ®Google Scholar
• Kundu, A.; Chakraborti, P. C. Effect of Strain Rate on Quasistatic Tensile Flow Behaviour of Solution Annealed 304 Austenitic Stainless Steel at Room Temperature. J. Mater. Sci. 2010, 45(20), 5482–5489. DOI: 10.1007/s10853-010-4605-2.
   Web of Science ®Google Scholar
• Meng, B.; Wang, W. H.; Zhang, Y. Y.; Wan, M. Size Effect on Plastic Anisotropy in Microscale Deformation of Metal Foil. J. Mater. Process. Technol. 2019, 271(March), 46–61. DOI: 10.1016/j.jmatprotec.2019.03.023.
   Google Scholar
• Kim, S.-I.; Yoo, Y.-C. Dynamic Recrystallization Behavior of AISI 304 Stainless Steel. Mater. Sci. Eng. A. 2001, 311(1–2), 108–113. DOI: 10.1016/S0921-5093(01)00917-0.
   Web of Science ®Google Scholar
• Lee, J. E.; Bae, D. H.; Chung, W. S.; Kim, K. H.; Lee, J. H.; Cho, Y. R. Effects of Annealing on the Mechanical and Interface Properties of Stainless Steel/Aluminum/Copper Clad-Metal Sheets. J. Mater. Process. Technol. 2007, 187–188, 546–549. DOI: 10.1016/j.jmatprotec.2006.11.121.
   Web of Science ®Google Scholar
• Ngaile, G.; Lowrie, J. Punch Design for Floating Based Micro-Tube Hydroforming Die Assembly. J. Mater. Process. Technol. 2018, 253, 168–177. DOI: 10.1016/j.jmatprotec.2017.10.049.
   Web of Science ®Google Scholar
• Kumar, A.; Das, M. Multiphysics Simulation and Experimental Investigation of Microtool Fabricated by EMM. Mater. Manuf. Process. 2021, 36(13), 1489–1500. DOI: 10.1080/10426914.2021.1905837.
   Web of Science ®Google Scholar
• Mirzadeh, H.; Parsa, M. H.; Ohadi, D. Hot Deformation Behavior of Austenitic Stainless Steel for a Wide Range of Initial Grain Size. Mater. Sci. Eng. A. 2013, 569, 54–60. DOI: 10.1016/j.msea.2013.01.050.
   Web of Science ®Google Scholar
• Dehghan-Manshadi, A.; Barnett, M. R.; Hodgson, P. D. Recrystallization in AISI 304 Austenitic Stainless Steel during and after Hot Deformation. Mater. Sci. Eng. A. 2008, 485(1–2), 664–672. DOI: 10.1016/j.msea.2007.08.026.
   Web of Science ®Google Scholar
• El Wahabi, M.; Cabrera, J. M.; Prado, J. M. Hot Working of Two AISI 304 Steels: A Comparative Study. Mater. Sci. Eng. A. 2003, 343(1–2), 116–125. DOI: 10.1016/S0921-5093(02)00357-X.
   Web of Science ®Google Scholar
• Krishnan, A. N.; Mathew, J. Size Effect and Micro Endmilling Performance while Sustainable Machining on Inconel 718. Mater. Manuf. Process. 2021, 36(6), 668–676. DOI: 10.1080/10426914.2020.1854465.
   Web of Science ®Google Scholar
• Pandey, A. K.; Date, P. P. Mechanical and Micro-Structural Characterization of Hot Rolled Brass Foil. Mater. Charact. 2021, 181, 111515. DOI: 10.1016/j.matchar.2021.111515.
   Web of Science ®Google Scholar
• Sudarsan, C.; Sajun Prasad, K.; Hazra, S.; Panda, S. K. Forming of Serpentine Micro-Channels on SS304 and AA1050 Ultra-Thin Metallic Sheets Using Stamping Technology. J. Manuf. Process. 2020, 56, 1099–1113. DOI: 10.1016/j.jmapro.2020.05.013.
   Web of Science ®Google Scholar
• Dai, Y. Z.; Chiang, F. P. On the Mechanism of Plastic Deformation Induced Surface Roughness. J. Eng. Mater. Technol. Trans. ASME. 1992, 1144, 432–438. DOI:10.1115/1.2904196.
   Web of Science ®Google Scholar
• Mallick, P.; Tewary, N. K.; Ghosh, S. K.; Chattopadhyay, P. P. Effect of Cryogenic Deformation on Microstructure and Mechanical Properties of 304 Austenitic Stainless Steel. Mater. Charact. 2017, 133, 77–86. DOI: 10.1016/j.matchar.2017.09.027.
   Web of Science ®Google Scholar
• Ta, Q. T. H.; Tran, N. M.; Noh, J. S. Pressureless Manufacturing of Cr2AlC Compound and the Temperature Effect. Mater. Manuf. Process. 2021, 36(2), 200–208. DOI: 10.1080/10426914.2020.1819547.
   Web of Science ®Google Scholar
• Jaiswal, A. P.; Khanna, N.; Bajpai, V. Orthogonal Machining of Heat Treated Ti-10-2-3: FE and Experimental. Mater. Manuf. Process. 2020, 35(16), 1822–1831. DOI: 10.1080/10426914.2020.1802039.
   Web of Science ®Google Scholar
• Timokhina, I. B.; Hodgson, P. D.; Pereloma, E. V. Effect of Microstructure on the Stability of Retained Austenite in TRIP Steels. Metall. Mater. Trans. A. 2004, 35(8), 2331–2340. DOI: 10.1007/s11661-006-0213-9.
   Google Scholar
• John, J.; Shanmuganatan, S. P.; Kiran, M. B.; Senthil Kumar, V. S.; Krishnamurthy, R. Friction Stir Processing Combined with Incremental Forming Effect on AA2014-T6. Mater. Manuf. Process. 2021, 36(8), 950–966. DOI: 10.1080/10426914.2021.1885696.
   Web of Science ®Google Scholar
• Fei, W. D.; Yue, H. Y.; Wang, L. D. Equicohesive Temperature of the Interface and Matrix and Its Effect on the Tensile Plasticity of Al18B4O33 Whiskers Reinforced Aluminum Composite at Elevated Temperatures. Mater. Chem. Phys. 2010, 119(3), 515–518. DOI: 10.1016/j.matchemphys.2009.10.006.
   Web of Science ®Google Scholar
• Phadnis, S. V.; Satpati, A. K.; Muthe, K. P.; Vyas, J. C.; Sundaresan, R. I. Comparison of Rolled and Heat Treated SS304 in Chloride Solution Using Electrochemical and XPS Techniques. Corros. Sci. 2003, 45(11), 2467–2483. DOI: 10.1016/S0010-938X(03)00099-4.
   Web of Science ®Google Scholar
• Schino, A. D. I.; Salvatori, I.; Kenny, J. M. Effects of Martensite Formation and Austenite Reversion on Grain Refining of AISI 304 Stainless Steel. J. Mater. Sci. 2002, 7, 4561–4565. DOI: 10.1023/A:1020631912685.
   Google Scholar
• Abeyrathna, B.; Zhang, P.; Pereira, M. P.; Wilkosz, D.; Micro-Roll, W. M. Forming of Stainless Steel Bipolar Plates for Fuel Cells. Int. J. Hydrogen Energy. 2019, 44(7), 3861–3875. DOI: 10.1016/j.ijhydene.2018.12.013.
   Web of Science ®Google Scholar
• Kang, G.; Zhang, J.; SUN, Y. F.; KAN, Q. H. Uniaxial Time-Dependent Ratcheting of SS304 Stainless Steel at High Temperatures. J. Iron Steel Res. Int. 2007, 14(1), 53–59. DOI: 10.1016/S1006-706X(07)60012-0.
   Web of Science ®Google Scholar
• Rodriguez, P. Serrated Plastic Flow. Bull. Mater. Sci. 1984, 6(4), 653–663. DOI: 10.1007/BF02743993.
   Google Scholar
• Hou, J.; Peng, Q. J.; Lu, Z. P.; Shoji, T.; Wang, J. Q.; Han, E. H.; Ke, W. Effects of Cold Working Degrees on Grain Boundary Characters and Strain Concentration at Grain Boundaries in Alloy 600. Corros. Sci. 2011, 53(3), 1137–1142. DOI: 10.1016/j.corsci.2010.11.022.
   Web of Science ®Google Scholar
• Rahman, M. Z.; Das, A. K.; Chattopadhyaya, S. Fabrication of High Aspect-Ratio Tungsten Microtools through Controlled Electrochemical Etching. Mater. Manuf. Process. 2021, 36(11), 1236–1247. DOI: 10.1080/10426914.2021.1905834.
   Web of Science ®Google Scholar
• Dobrzynski, M.; Chuchala, D.; Orlowski, K. A.; Kaczmarczyk, M. Experimental Research of the Effect of Face Milling Strategy on the Flatness Deviations. Mater. Manuf. Process. 2021, 36(2), 235–244. DOI: 10.1080/10426914.2020.1819548.
   Web of Science ®Google Scholar
• Zhong, Z. W. Advanced Polishing, Grinding and Finishing Processes for Various Manufacturing Applications: A Review. Mater. Manuf. Process. 2020, 35(12), 1279–1303. DOI: 10.1080/10426914.2020.1772481.
   Web of Science ®Google Scholar
• Sarmah, A.; Kar, S.; Patowari, P. K. Surface Modification of Aluminum with Green Compact Powder Metallurgy Inconel-Aluminum Tool in EDM. Mater. Manuf. Process. 2020, 35(10), 1104–1112. DOI: 10.1080/10426914.2020.1765253.
   Web of Science ®Google Scholar
• Fuller, R. W.; Ehrgott, J. Q.; Heard, W. F.; Robert, S. D.; Stinson, R. D.; Solanki, K.; Horstemeyer, M. F. Failure Analysis of AISI 304 Stainless Steel Shaft. Eng. Fail. Anal. 2008, 15(7), 835–846. DOI: 10.1016/j.engfailanal.2007.11.001.
   Web of Science ®Google Scholar
• Huang, W.; Zhang, Y.; Dai, W.; Long, R. Mechanical Properties of 304 Austenite Stainless Steel Manufactured by Laser Metal Deposition. Mater. Sci. Eng. A. 2019, 758, 60–70. DOI: 10.1016/j.msea.2019.04.108.
   Web of Science ®Google Scholar
• Mohta, K.; Gupta, S. K.; Cathirvolu, S.; Jaganathan, S.; Chattopadhyay, J. High Temperature Deformation Behavior of Indian PHWR Calandria Material SS 304L. Nucl. Eng. Des. 2020, 368, 110801. DOI: 10.1016/j.nucengdes.2020.110801.
   Web of Science ®Google Scholar
• Marchattiwar, A.; Sarkar, A.; Chakravartty, J. K.; Kashyap, B. P. Dynamic Recrystallization during Hot Deformation of 304 Austenitic Stainless Steel. J. Mater. Eng. Perform. 2013, 22(8), 2168–2175. DOI: 10.1007/s11665-013-0496-0.
   Web of Science ®Google Scholar