Micro-hexagonal Profile Making on Alloy276 by Fiber Laser: Desirability Approach

References

• Vidyasagar, K. C.; Rana, A.; Kalyanasundaram, D. Optimization of Laser Parameters for Improved Corrosion Resistance of Nitinol. Mater. Manuf. Process. 2020, 35(14), 1661–1669. DOI: 10.1080/10426914.2020.1784926.
   Web of Science ®Google Scholar
• Venkatesan, K.; Devendiran, S.; Bhupatiraju, S. C.; Kolluru, S.; Pavan Kumar, C. Experimental Investigation and Optimization of Micro-Drilling Parameters on Inconel 800 Alloy. Mater. Manuf. Process. 2020, 35(11), 1214–1227. DOI: 10.1080/10426914.2020.1746333.
   Web of Science ®Google Scholar
• Khajehzadeh, M.; Razfar, M. R. Process Parameters Influence Laser-Assisted Machining-Induced Residual Stresses. Mater. Manuf. Process. 2020, 35(15), 1680–1689. DOI: 10.1080/10426914.2020.1784930.
   Web of Science ®Google Scholar
• Ma, J. W.; He, G. Z.; Jia, Z. Y.; Wang, X. L.; Wang, J. C. Solution of Maximum Laser Ablation Depth Based on the Dynamic Energy Distribution Model. Mater. Manuf. Process. 2019, 34(15), 1719–1725. DOI: 10.1080/10426914.2019.1666987.
   Google Scholar
• Hribar, L.; Gregorcic, P.; Senegacnik, M.; Jezersek, M. The Influence of the Processing Parameters on the Laser-Ablation of Stainless Steel and Brass During the Engraving by Nanosecond Fiber Laser. Nanomaterials. 2022, 2(2), 232. DOI: 10.3390/nano12020232.
   Google Scholar
• Fang, S.; Perez, V.; Salan, N.; Baehre, D.; Llanes, L. Surface Patterning of Cemented Carbides by Means of Nanosecond Laser. Mater. Manuf. Process. 2020, 35(2), 123–129. DOI: 10.1080/10426914.2019.1628268.
   Web of Science ®Google Scholar
• Sahu, A. K.; Jha, S. Microchannel Fabrication and Metallurgical Characterization on Titanium by Nanosecond Fiber Laser Micro Milling. Mater. Manuf. Process. 2020, 35(3), 279–290. DOI: 10.1080/10426914.2020.1718702.
   Web of Science ®Google Scholar
• Wu, J.; Yang, L.; Li, Y.; Sultan, M.; Geng, D.; Chen, L. Microscopic Mechanisms of Femtosecond Laser Ablation of HMX from Reactive Molecular Dynamics Simulation. J. Phys. Chem. C. 2020, 124(21), 11681–11693. DOI: 10.1021/acs.jpcc.0c01567.
   Web of Science ®Google Scholar
• Zhang, C.; Zhang, L.; Cui, Y.; Feng, Q.; Cheng, C. Effects of High-Temperature Aging on Precipitation and Corrosion Behavior of a Ni-Cr-Mo-Based Hastelloy C276 Alloy. J. Mater. Eng. Perform. 2020, 29(3), 2026–2034. DOI: 10.1007/s11665-020-04723.
   Web of Science ®Google Scholar
• Gopichand, G.; Sreenivasarao, M. Experimental Investigation of Hastelloy C-276 Using Abrasive Waterjet Milling. Mater. Res. Express. 2019, 6(12), 126592. DOI: 10.1088/2053-1591/ab5ac5.
   Google Scholar
• Sen, B.; Hussain, S. A. I.; Gupta, A. D.; Gupta, M. K.; Pimenov, D. Y.; Mikołajczyk, T. Application of Type-2 Fuzzy AHP-ARAS for Selecting Optimal WEDM Parameters. Metals. 2021, 11(1), 42. DOI: 10.3390/met11010042.
   Google Scholar
• Manikandan, M.; Arivazhagan, N.; Rao, M. N.; Reddy, G. M. Microstructure and Mechanical Properties of Alloy C-276 Weldments Fabricated by Continuous and Pulsed Current Gas Tungsten Arc Welding Techniques. J. Manuf. Process. 2014, 16, 563–572. DOI: 10.1016/j.jmapro.2014.08.002.
   Web of Science ®Google Scholar
• Jeyaprakash, N.; Yang, C.H.; Sivasankaran, S. Laser Cladding Process of Cobalt and Nickel-Based Hard-Micron-Layers on 316L-Stainless-Steel-Substrate. Mater. Manuf. Process. 2020, 35(2), 142–151. DOI: 10.1080/10426914.2019.1692354.
   Web of Science ®Google Scholar
• Singh, G.; Aggarwal, V.; Singh, S. Experimental Investigations into Machining Performance of Hastelloy C-276 in Different Cooling Environments. Mater. Manuf. Process. 2021, 36(15), 1789–1799. DOI: 10.1080/10426914.2021.1945099.
   Web of Science ®Google Scholar
• Jeyaprakash, N.; Yang, C. H. Comparative Study of NiCrfemonb/fecrmovc Laser Cladding Process on the Nickel-Based Alloy. Mater. Manuf. Process. 2020, 35(12), 1383–1391. DOI: 10.1080/10426914.2020.1779933.
   Web of Science ®Google Scholar
• Msaoubi, R.; Outeiro, J. C.; Chandrasekaran, H. O.; Dillon, O. W., Jr; Jawahir, I. S. A Review of Surface Integrity in Machining and Its Impact on Functional Performance and Life of Machined Products. Int. J. Sus. Manuf. 2008, 1(1–2), 203–209. DOI: 10.1504/IJSM.2008.019234.
   Google Scholar
• Mikolajczyk, T. Analyse of Possibility of Form Tools Manufacturing Using Wire Cutting EDM. Appl. Mech. Mater. 2014, 656, 200–205. https://doi.org/10.4028/www.scientific.net/AMM.656.200.
   Google Scholar
• Rajamani, D.; Siva Kumar, M.; Balasubramanian, E.; Tamilarasan, A. Nd: YAG Laser Cutting of Hastelloy C276: ANFIS Modeling and Optimization Through WOA. Mater. Manuf. Process. 2021, 36(15), 1746–1760. DOI: 10.1080/10426914.2021.1942910.
   Web of Science ®Google Scholar
• Narayanan, B. K.; Duraiselvam, M.; Natarajan, S.; Anaz Khan, M. Laser Material Processing of Nickel Alloy for Improved Erosion Resistance. Mater. Manuf. Process. 2017, 32(14), 1596–1605. DOI: 10.1080/10426914.2017.1339312.
   Web of Science ®Google Scholar
• Rajamani, D.; Ananthakumar, K.; Balasubramanian, E.; Paulo Davim, J. Experimental Investigation and Optimization of PAC Parameters on Monel 400™ Alloy. Mater. Manuf. Processes. 2018, 33(16), 1864–1873. DOI: 10.1080/10426914.2018.1532085.
   Web of Science ®Google Scholar
• Mikolajczyk, T.; Olaru, A. Some Methods of Research Results Approximation. Appl. Mech. Mater. 2015, 783, 95–103. https://doi.org/10.4028/www.scientific.net/amm.783.95.
   Google Scholar
• Wang, Y.; Yang, L. J.; Wang, N. J. An Investigation of Laser-Assisted Machining of Al2o3 Particle Reinforced Aluminum Matrix Composite. J. Mater. Process. Technol. 2002, 129(1–3), 268–272. DOI: 10.1016/S0924-0136(02)00616-7.
   Web of Science ®Google Scholar
• Kalantari, O.; Fallah, M. M.; Jafarian, F.; Hamzeloo, S. R. Surface Integrity in Laser-Assisted Machining of Ti6al4v. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 2020, 35(20), 5009–5016. DOI: 10.1177/0954406220978255.
   Google Scholar
• Mahesh, K.; Philip, J. T.; Joshi, S. N.; Kuriachen, B. Machinability of Inconel 718: A Critical Review on the Impact of Cutting Temperatures. Mater. Manuf. Process. 2021, 36(7), 753–791. DOI: 10.1080/10426914.2020.1843671.
   Web of Science ®Google Scholar
• Yilbas, B. S. Effect of Process Parameters on the Kerf Width During the Laser Cutting Process. Proceedings of the Institution of Mech. Engi. Part B: J. Engi. Manuf. 2001, 215(10), 1357–1365. DOI: 10.1243/0954405011519132.
   Google Scholar
• Masoudi, S.; Mirabdolahi, M.; Dayyani, M.; Jafarian, F.; Vafadar, A.; Dorali, M.R. Development of an Intelligent Model to Optimize Heat-Affected Zone, Kerf, and Roughness in 309 Stainless Steel Plasma Cutting by Using Experimental Results. Mater. Manuf. Process. 2019, 34(3), 345–356. DOI: 10.1080/10426914.2018.1532579.
   Web of Science ®Google Scholar
• Ahmed, N.; Rafaqatn, M.; Pervaiz, S.; Umer, U.; Alkhalefa, H.; Shar, M.A.; Mian, S. H. Controlling the Material Removal and Roughness of Inconel 718 in Laser Machining. Mater. Manuf. Process. 2019, 34(10), 1169–1181. DOI: 10.1080/10426914.2019.1615082.
   Web of Science ®Google Scholar
• Bose, S.; Nandi, T. Statistical and Experimental Investigation Using a Novel Multi-Objective Optimization Algorithm on a Novel Titanium Hybrid Composite Developed by Lens Process. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 2021, 235(16), 2911–2933. DOI: 10.1177/0954406220959101.
   Google Scholar
• Arumugam, A.; Lakshmanan, P.; Palani, S. Micro Groove Cutting on the Surfaces of Cu-B4c Nanocom0.Posites by Fiber Laser. Surf. Topogr. Metrol. Prop. 2021, 9(3), 035023. DOI: 10.1088/2051-672X/ac1c7f.
   Google Scholar
• Boujelbene, M. Influence of the Co2 Laser Cutting Process Parameters on the Quadratic Mean Roughness Ra of the Low Carbon Steel. Proc. Manuf. 2018, 20, 259–264. DOI: 10.1016/j.promfg.2018.02.038.
   Google Scholar
• Guo, Y. B.; Li, W.; Jawahir, I. S. Surface Integrity Characterization and Prediction in Machining of Hardened and Difficult-To-Machine Alloys: A State-Of-Art Research Review and Analysis. Mach. Sci. Technol. 2009, 13(4), 437–470. DOI: 10.1080/10910340903454922.
   Web of Science ®Google Scholar
• Gopinath, C.; Lakshmanan, P.; Palani, S. Fiber Laser Micro-Cutting on Duplex Steel: Parameter Optimization by TOPSIS. Mater. Manuf. Process. 2021, 1–10. 10.1080/10426914.2021.1981939.
   Google Scholar
• Sharifi, M.; Akbari, M. Experimental Investigation of the Effect of Process Parameters on Cutting Region Temperature and Cutting Edge Quality in Laser Cutting of AL6061T6 Alloy. Optik. Int J. Light. Elec. 2019, 184, 457–463. DOI: 10.1016/j.ijleo.2019.04.105.
   Google Scholar
• Elsheikh, A. H.; Deng, W.; Showaib, E. A. Improving Laser Cutting Quality of Polymethyl Methacrylate Sheet: Experimental Investigation and Optimization. J. Mater. Res. Technol. 2020, 9(2), 1325–1339. DOI: 10.1016/j.jmrt.2019.11.059.
   Google Scholar
• Jain, A.; Singh, B.; Shrivastava, Y. Analysis of Heat-Affected Zone (HAZ) During Micro-Drilling of a New Hybrid Composite. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 2020, 234(2), 620–634. DOI: 10.1177/0954406219877911.
   Google Scholar
• Kumarasamy, G.; Lakshmanan, P.; Thangamani, G. Electrochemical Micromachining of Hastelloy C276 by Different Electrolyte Solutions. Arab. J. Sci. Eng. 2021, 46(3), 2243–2259. DOI: 10.1007/s13369-020-05032-1.
   Web of Science ®Google Scholar