Antisymmetric deformation behavior during eccentric explosion electro-hydraulic sheet forming process

References

• Oyane, M.; Masaki, S. Fundamental Study on Electrohydraulic. Bull. JSME. 1964, 7(26), 474–480. DOI: 10.1299/jsme1958.7.474.
   Google Scholar
• Rohatgi, A.; Stephens, E. V.; Soulami, A.; Davies, R. W.; Smith, M. T. Experimental Characterization of Sheet Metal Deformation During Electro-Hydraulic Forming. J. Mater. Process. Technol. 2011, 211(11), 1824–1833. DOI: 10.1016/j.jmatprotec.2011.06.005.
   Web of Science ®Google Scholar
• Rácz, P.; Göbl, N.; Horváth, D.; Mamalis, A. G. Aspects of Electrodynamic Forming Processes. Mater. Sci. Forum. 2013, 767, 126–131. DOI: 10.4028/MSF.767.126.
   Google Scholar
• Woo, M.; Song, W.; Kang, B.; Kim, J. Evaluation of Formability Enhancement of Aluminum Alloy Sheet in Electrohydraulic Forming Process with Free-Bulge Die. Int. J. Adv. Manuf. Technol. 2019, 101(1–4), 1085–1093. DOI: 10.1007/s00170-018-2989-3.
   Web of Science ®Google Scholar
• Samei, J.; Green, D. E.; Golovashchenko, S. Metallurgical Investigations on Hyperplasticity in Dual Phase Steel Sheets. J. Manuf. Sci. Eng. 2014, 136(4), 41010. DOI: 10.1115/1.4027492.
   Web of Science ®Google Scholar
• Jenab, A.; Green, D. E.; Alpas, A. T.; Golovashchenko, S. F. Experimental and Numerical Analyses of Formability Improvement of AA5182-O Sheet During Electro-Hydraulic Forming. J. Mater. Process. Technol. 2018, 255, 914–926. DOI: 10.1016/j.jmatprotec.2017.12.037.
   Web of Science ®Google Scholar
• Woo, M.; Song, W.; Kang, B.; Kim, J. Acquisition and Evaluation of Theoretical Forming Limit Diagram of Al 6061-T6 in Electrohydraulic Forming Process. Metals. 2019, 9(4), 401. DOI: 10.3390/met9040401.
   Web of Science ®Google Scholar
• Zhang, Y.; Li, X.; Tang, Y.; Liu, H.; Ouyang, S.; Zhang, Z.; Cao, Q.; Li, L. Research into Controlling the Material Flow for Electrohydraulic Forming Alloy Tubes by a Pulsed Magnet. IEEE Trans. Appl. Supercond. 2022, 32(6), 1–5. DOI: 10.1109/TASC.2022.3149859.
   Web of Science ®Google Scholar
• Langstädtler, L.; Schnabel, S.; Herrmann, M.; Schenck, C.; Kuhfuss, B. Short-Term Material Characterization by Electrohydraulic Incremental Extrusion Through Micro Channels. Materials. 2021, 14(3), 525. DOI: 10.3390/ma14030525.
   PubMed Web of Science ®Google Scholar
• Li, C.; Lai, Z.; Wang, C.; Gao, Y.; Wang, Z.; Cao, Q.; Han, X.; Li, L. Toward Better Metal Flow Control in Electrohydraulic Sheet Forming by Combining with Electromagnetic Approach. J. Mater. Process. Technol. 2022, 299, 117343. DOI: 10.1016/j.jmatprotec.2021.117343.
   Web of Science ®Google Scholar
• Heggemann, T.; Psyk, V.; Oesterwinter, A.; Linnemann, M.; Kräusel, V.; Homberg, W. Comparative Analysis of Electrohydraulic and Electromagnetic Sheet Metal Forming Against the Background of the Application as an Incremental Processing Technology. Metals. 2022, 12(4), 660. DOI: 10.3390/met12040660.
   Web of Science ®Google Scholar
• Cantergiani, E.; Atieh, S.; Léaux, F.; Perez Fontenla, A. T.; Prunet, S.; Dufay-Chanat, L.; Koettig, T.; Bertinelli, F.; Capatina, O.; Favre, G.; et al. Niobium Superconducting Rf Cavity Fabrication by Electrohydraulic Forming. Phys. Rev. Accel. Beams. 2016, 19(11), 114703.
   Web of Science ®Google Scholar
• Mamutov, A. V.; Golovashchenko, S. F.; Mamutov, V. S.; Bonnen, J. J. F. Modeling of Electrohydraulic Forming of Sheet Metal Parts. J. Mater. Process. Technol. 2015, 219, 84–100. DOI: 10.1016/j.jmatprotec.2014.11.045.
   Web of Science ®Google Scholar
• Mamutov, A. V.; Golovashchenko, S. F.; Bessonov, N. M.; Mamutov, V. S. Electrohydraulic Forming of Low Volume and Prototype Parts: Process Design and Practical Examples. J. Manuf. Mater. Process. 2021, 5(2), 47. DOI: 10.3390/jmmp5020047.
   Google Scholar
• Stelmashuk, V.; Hoffer, P. Shock Waves Generated by an Electrical Discharge on Composite Electrode Immersed in Water with Different Conductivities. IEEE Trans. Plasma. Sci. 2012, 40(7), 1907–1912. DOI: 10.1109/TPS.2012.2197638.
   Web of Science ®Google Scholar
• Yi, L.; Jia, R. Y.; Wei, L. S.; Chang, L. F.; Yang, L.; Kuo, S. Y. Comparison and Analysis of Shockwave Characteristics Between Underwater Pulsed Discharge and Metal Wire Explosion. Phys. Plasmas. 2020, 27(3), 33503. DOI: 10.1063/1.5140829.
   Web of Science ®Google Scholar
• Bonnen, J. J. F.; Golovashchenko, S. F.; Dawson, S. A.; Mamutov, A. V. Electrode Erosion Observed in Electrohydraulic Discharges Used in Pulsed Sheet Metal Forming. J. Mater. Eng. Perform. 2013, 22(12), 3946–3958. DOI: 10.1007/s11665-013-0690-0.
   Web of Science ®Google Scholar
• Ahmed, M.; Shrivastava, A.; Kumar, D. R.; Nabi, M. U. Optimisation of Process Parameters for Energy-Efficient Electro-Hydraulic Forming of Al-Mg Alloy Sheets. Adv. Mater. Process. Technol. 2020, 6(3), 620–636. DOI: 10.1080/2374068X.2020.1731228.
   Google Scholar
• Zohoor, M.; Mousavi, S. M. Evaluation and Optimization of Effective Parameters in Electrohydraulic Forming Process. J. Braz. Soc. Mech. Sci. 2018, 40(11), 524. DOI: 10.1007/s40430-018-1449-1.
   Web of Science ®Google Scholar
• Zheng, Q.; Yu, H.; Xie, X.; Cai, X. Influence of Wire Parameters on the Formability of DP600 Steel Sheets During Wire Explosion Impact Forming. Int. J. Adv. Manuf. Technol. 2020, 108(9–10), 3361–3372. DOI: 10.1007/s00170-020-05631-0.
   Web of Science ®Google Scholar
• Sarkisov, G. S.; Rosenthal, S. E.; Cochrane, K. R.; Struve, K. W.; Deeney, C.; McDaniel, D. H. Nanosecond Electrical Explosion of Thin Aluminum Wires in a Vacuum: Experimental and Computational Investigations. Phys. Rev. E, Statistical, Nonlinear, and Soft Matter Physics. 2005, 71(4), 46404. DOI: 10.1103/PhysRevE.71.046404.
   Web of Science ®Google Scholar
• Han, R.; Zhu, W.; Wu, J.; Li, C.; Zhang, C.; Cui, R.; He, F.; Ouyang, J.; Wang, Y.; Ding, W. Spatial-Temporal Evolution of Plasma Radiation in Electrical Wire Explosion: A Morphological Observation. J. Phys D: Appl Phys. 2020, 53(34), 345201. DOI: 10.1088/1361-6463/ab8b07.
   Web of Science ®Google Scholar
• Yin, G.; Shi, H.; Fan, Y.; Wu, J.; Li, X.; Qiu, A. Effects of Circuit Inductance on Electrical and Shock Wave Characteristics at Underwater Wire Explosion. J. Phys D: Appl Phys. 2020, 53(19), 195502. DOI: 10.1088/1361-6463/ab747d.
   Web of Science ®Google Scholar
• Qian, D.; Liu, Z.; Li, L.; Zou, X.; Wang, X. Observation of Early Stage of Underwater Electrical Wire Explosion by Shadowgraph. IEEE Access. 2020, 8, 85968–85972. DOI: 10.1109/ACCESS.2020.2992284.
   Web of Science ®Google Scholar
• Sheftman, D.; Shafer, D.; Efimov, S.; Krasik, Y. E. Evaluation of Electrical Conductivity of Cu and Al Through Sub Microsecond Underwater Electrical Wire Explosion. Phys. Plasmas. 2012, 19(3), 34501. DOI: 10.1063/1.3689856.
   Web of Science ®Google Scholar
• Iyama, H.; Itoh, S. Eccentric Spherical Forming of Metal Plate by Underwater Shock Loading. Mater. Sci. Forum. 2011, 673, 291–296. DOI: 10.4028/MSF.673.291.
   Google Scholar
• Mamalis, A. G.; Manolakos, D. E.; Kladas, A. G.; Koumoutsos, A. K. Electromagnetic Forming Tools and Processing Conditions: Numerical Simulation. Mater. Manuf. Process. 2006, 21(4), 411–423. DOI: 10.1080/10426910500411785.
   Web of Science ®Google Scholar