Experimental investigations into ultrasonic assisted magnetic abrasive flow machining process

References

• Kumar, M.; Alok, A.; Kumar, V.; Das, M. Advanced Abrasive-Based Nano-Finishing Processes: Challenges, Principles and Recent Applications. Mater. Manuf. Process. 2022, 37(4), 372–392. DOI: 10.1080/10426914.2021.2001509.
   Web of Science ®Google Scholar
• Vats, A.; Dvivedi, A.; Kumar, P. Investigation of Hole Roundness-Error Using Different Electrolytes in STED Process. Mater. Manuf. Process. 2021, 00(00), 1–17. DOI: 10.1080/10426914.2021.2016811.
   Google Scholar
• Gao, Y.; Zhao, Y.; Zhang, G.; Zhang, G.; Yin, F. Polishing of Paramagnetic Materials Using Atomized Magnetic Abrasive Powder. Mater. Manuf. Process. 2019, 34(6), 604–611. DOI: 10.1080/10426914.2018.1532087.
   Web of Science ®Google Scholar
• Chaudhari, A. R.; Judal, K. B. Development and Experimentation of Modified Electro-Chemical Magnetic Abrasive Finishing. Mater. Manuf. Process. 2022, 37(4), 448–457. DOI: 10.1080/10426914.2021.2016822.
   Web of Science ®Google Scholar
• Iqbal, F.; Alam, Z.; Khan, D. A.; Jha, S. Automated Insular Surface Finishing by Ball End Magnetorheological Finishing Process. Mater. Manuf. Process. 2022, 37(4), 437–447. DOI: 10.1080/10426914.2021.2001502.
   Web of Science ®Google Scholar
• Sambharia, J. K.; Mali, H. S.; Garg, V. Experimental Investigation on Unidirectional Abrasive Flow Machining of Trim Die Workpiece. Mater. Manuf. Process. 2018, 33(6), 651–660. DOI: 10.1080/10426914.2017.1364847.
   Web of Science ®Google Scholar
• Petare, A. C.; Jain, N. K. Improving Spur Gear Microgeometry and Surface Finish by AFF Process. Mater. Manuf. Process. 2018, 33(9), 923–934. DOI: 10.1080/10426914.2017.1376074.
   Web of Science ®Google Scholar
• Nagdeve, L.; Jain, V. K.; Ramkumar, J. Optimization of Process Parameters in Nano-Finishing of Co-Cr-Mo Alloy Knee Joint. Mater. Manuf. Process. 2020, 35(9), 985–992. DOI: 10.1080/10426914.2020.1750633.
   Web of Science ®Google Scholar
• Dixit, N.; Sharma, V.; Kumar, P. Research Trends in Abrasive Flow Machining: A Systematic Review. J. Manuf. Process. 2021, 64(March), 1434–1461. DOI: 10.1016/j.jmapro.2021.03.009.
   Google Scholar
• Walia, R. S.; Shan, H. S.; Kumar, P. Multi-Response Optimization of CFAAFM Process Through Taguchi Method and Utility Concept. Mater. Manuf. Process. 2006, 21(8), 907–914. DOI: 10.1080/10426910600837814.
   Web of Science ®Google Scholar
• Kathiresan, S.; Mohan, B. Experimental Analysis of Magneto Rheological Abrasive Flow Finishing Process on AISI Stainless Steel 316L. Mater. Manuf. Process. 2018, 33(4), 422–432. DOI: 10.1080/10426914.2017.1279317.
   Web of Science ®Google Scholar
• Dabrowski, L.; Marciniak, M.; Szewczyk, T. Analysis of Abrasive Flow Machining with an Electrochemical Process Aid. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2006, 220(3), 397–403. DOI: 10.1243/095440506X77571.
   Web of Science ®Google Scholar
• Jones, A. R.; Hull, J. B. Ultrasonic Flow Polishing. Ultrasonics. 1998, 36(1–5), 97–101. DOI: 10.1016/S0041-624X(97)00147-9.
   Web of Science ®Google Scholar
• Sharma, A. K.; Venkatesh, G.; Rajesha, S.; Kumar, P. Experimental Investigations into Ultrasonic-Assisted Abrasive Flow Machining (UAAFM) Process. Int. J. Adv. Manuf. Technol. 2015, 80(1–4), 477–493. DOI: 10.1007/s00170-015-7009-2.
   Web of Science ®Google Scholar
• Walia, R. S.; Shan, H. S.; Kumar, P. Abrasive Flow Machining with Additional Centrifugal Force Applied to the Media. Mach. Sci. Technol. 2006, 10(3), 341–354. DOI: 10.1080/10910340600902157.
   Web of Science ®Google Scholar
• Sankar, M. R.; Mondal, S.; Ramkumar, J.; Jain, V. K. Experimental Investigations and Modeling of Drill Bit-Guided Abrasive Flow Finishing (DBG-AFF) Process. Int. J. Adv. Manuf. Technol. 2009, 42(7–8), 678–688. DOI: 10.1007/s00170-008-1642-y.
   Web of Science ®Google Scholar
• Pusavec, F.; Kenda, J. The Transition to a Clean, Dry, and Energy Efficient Polishing Process: An Innovative Upgrade of Abrasive Flow Machining for Simultaneous Generation of Micro-Geometry and Polishing in the Tooling Industry. J. Clean. Prod. 2014, 76, 180–189. DOI: 10.1016/j.jclepro.2014.03.071.
   Web of Science ®Google Scholar
• Ali, P.; Walia, R. S.; Murtaza, Q.; Singari, R. M. Material Removal Analysis of Hybrid EDM-Assisted Centrifugal Abrasive Flow Machining Process for Performance Enhancement. J. Brazilian Soc. Mech. Sci. Eng. 2020, 42(6), 302. DOI: 10.1007/s40430-020-02375-6.
   Web of Science ®Google Scholar
• Jha, S.; Jain, V. K. Design and Development of the Magnetorheological Abrasive Flow Finishing (MRAFF) Process. Int. J. Mach. Tools Manuf. 2004, 44(10), 1019–1029. DOI: 10.1016/j.ijmachtools.2004.03.007.
   Web of Science ®Google Scholar
• Kumar, M.; Ahmad, S.; Das, M. Magnetorheological-Finishing of Miniature Gear Teeth Profiles Using Uniform Flow Restrictor. Mater. Manuf. Process. 2022, 37(4), 467–482. DOI: 10.1080/10426914.2021.1954193.
   Web of Science ®Google Scholar
• Das, M.; Jain, V. K.; Ghoshdastidar, P. S. The Out-Of-Roundness of the Internal Surfaces of Stainless Steel Tubes Finished by the Rotational–Magnetorheological Abrasive Flow Finishing Process. Mater. Manuf. Process. 2011, 26(8), 1073–1084. DOI: 10.1080/10426914.2010.537141.
   Web of Science ®Google Scholar
• Das, M.; Jain, V. K.; Ghoshdastidar, P. S. Nano-Finishing of Stainless-Steel Tubes Using Rotational Magnetorheological Abrasive Flow Finishing Process. Mach. Sci. Technol. 2010, 14(3), 365–389. DOI: 10.1080/10910344.2010.511865.
   Web of Science ®Google Scholar
• Singh, S.; Shan, H. S.; Kumar, P. Parametric Optimization of Magnetic-Field-Assisted Abrasive Flow Machining by the Taguchi Method. Qual. Reliab. Eng. Int. 2002, 18(4), 273–283. DOI: 10.1002/qre.470.
   Web of Science ®Google Scholar
• Sankar, M. R.; Jain, V. K.; Ramkumar, J. Nano-Finishing of Cylindrical Hard Steel Tubes Using Rotational Abrasive Flow Finishing (R-AFF) Process. Int. J. Adv. Manuf. Technol. 2016, 85(9–12), 2179–2187. DOI: 10.1007/s00170-015-8189-5.
   Web of Science ®Google Scholar
• Dixit, N.; Sharma, V.; Kumar, P. Experimental Investigations into Abrasive Flow Machining (AFM) of 3D Printed ABS and PLA Parts. Rapid Prototyp. J. 2022, 28(1), 161–174. DOI: 10.1108/RPJ-01-2021-0013.
   Web of Science ®Google Scholar
• Sharma, V.; Kumar, P.; Dixit, N. An Ultrasonic Assisted Magnetic Abrasive Flow Machining Process and a Device Therefor. 2021, Application No. 202111054926.
   Google Scholar
• Dixit, N.; Sharma, V.; Kumar, P. Development and Characterization of Xanthan Gum-Based Abrasive Media and Performance Analysis Using Abrasive Flow Machining. J. Manuf. Process. 2021, 67(April), 101–115. DOI: 10.1016/j.jmapro.2021.04.053.
   Google Scholar
• Dixit, N.; Sharma, V.; Kumar, P. Mathematical Modeling of Material Removal and Surface Roughness in Ultrasonic-Assisted Magnetic Abrasive Flow Machining Process. J. Manuf. Sci. Eng. 2022, 144(12), 121009. DOI: 10.1115/1.4055053.
   Web of Science ®Google Scholar
• Selvakumar, S.; Sreebalaji, V. S.; Ravikumar, K. Machinability Analysis and Optimization in Micro Turning on Tool Wear for Titanium Alloy. Mater. Manuf. Process. 2021, 36(7), 792–802. DOI: 10.1080/10426914.2020.1866198.
   Web of Science ®Google Scholar
• Yadav, V. K.; Kumar, P.; Dvivedi, A. Effect of Tool Rotation in Near-Dry EDM Process on Machining Characteristics of HSS. Mater. Manuf. Process. 2019, 34(7), 779–790. DOI: 10.1080/10426914.2019.1605171.
   Web of Science ®Google Scholar
• Sharma, V.; Pandey, P. M. Experimental Investigations and Statistical Modeling of Surface Roughness During Ultrasonic-Assisted Turning with Self-Lubricating Cutting Inserts. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng. 2018, 232(6), 709–722. DOI: 10.1177/0954408917738127.
   Web of Science ®Google Scholar
• Sarkar, M.; Jain, V. Nanofinishing of Freeform Surfaces Using Abrasive Flow Finishing Process. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2017, 231(9), 1501–1515. DOI: 10.1177/0954405415599913.
   Web of Science ®Google Scholar
• Jain, V. K.; Kumar, V.; Sankar, M. R. Experimental Study and Empirical Modelling of Magnetic Abrasive Finishing on Ferromagnetic and Non-Ferromagnetic Materials. Int. J. Precis. Technol. 2012, 3(1), 91. DOI: 10.1504/IJPTECH.2012.045991.
   Google Scholar
• Das, M.; Jain, V. K.; Ghoshdastidar, P. S. Analysis of Magnetorheological Abrasive Flow Finishing (MRAFF) Process. Int. J. Adv. Manuf. Technol. 2008, 38(5–6), 613–621. DOI: 10.1007/s00170-007-1095-8.
   Web of Science ®Google Scholar