References
- Zhang, Q.; Zhang, S.; Li, J. Three Dimensional Finite Element Simulation of Cutting Forces and Cutting Temperature in Hard Milling of AISI H13 Steel. Procedia Manuf. 2017, 10, 37–47. DOI: 10.1016/j.promfg.2017.07.018.
- Pellicer, N.; Ciurana, J.; Delgado, J. Tool Electrode Geometry and Process Parameters Influence on Different Feature Geometry and Surface Quality in Electrical Discharge Machining of AISI H13 Steel. J. Intell. Manuf. 2011, 22(4), 575–584. DOI: 10.1007/s10845-009-0320-8.
- Singh, A.; Anandita, S.; Gangopadhyay, S. Microstructural Analysis and Multiresponse Optimization During ECM of Inconel 825 Using Hybrid Approach. Mater. Manuf. Process. 2015, 30(7), 842–851. DOI: 10.1080/10426914.2014.973575.
- Shanmugam, R.; Ramoni, M.; Thangamani, G.; Thangaraj, M. Influence of Additive Manufactured Stainless Steel Tool Electrode on Machinability of Beta Titanium Alloy. Metals (Basel). 2021, 11, 5. DOI: 10.3390/met11050778.
- Ezugwu, E. O.; Wang, Z. M. Titanium Alloys and Their Machinability - a Review. J. Mater. Process. Technol. 1997, 68(3), 262–274. DOI: 10.1016/S0924-0136(96)00030-1.
- Rajkeerthi, E.; Hariharan, P.; Pradeep, N. Enhancing Machining Rate and Geometrical Accuracy in Electrochemical Micromachining of Co-Ni-Cr-W Superalloy. Mater. Manuf. Process. 2021, 36(4), 488–500. DOI: 10.1080/10426914.2020.1843672.
- Lohrengel, M. M.; Rataj, K. P.; Schubert, N.; Schneider, M.; Höhn, S.; Michaelis, A.; Hackert-Oschätzchen, M.; Martin, A.; Schubert, A. Electrochemical Machining of Hard Metals - WC/Co as Example. Powder Metall. 2014, 57(1), 21–30. DOI: 10.1179/1743290113Y.0000000062.
- Yuan, C. J.; Bakar, A. S. H. A.; Roslan, M. N.; Cheng, C. W.; Rosekhizam, U. N. S. M.; Ghani, J. A.; Wahid, Z. Electrochemical Machining (ECM) and Its Recent Development. J. Tribol. 2021, 28(August 2020), 20–31.
- Asokan, P.; Kumar, R. R.; Jeyapaul, R.; Santhi, M. Development of Multi-Objective Optimization Models for Electrochemical Machining Process. Int. J. Adv. Manuf. Technol. 2008, 39(1–2), 55–63. DOI: 10.1007/s00170-007-1204-8.
- Ross, N. S.; Mia, M.; Anwar, S.; G, M.; Saleh, M.; Ahmad, S. A Hybrid Approach of Cooling Lubrication for Sustainable and Optimized Machining of Ni-Based Industrial Alloy. J. Clean. Prod. 2021, 321, 321. DOI: 10.1016/j.jclepro.2021.128987.
- Ross, N. S.; Sheeba, P. T.; Jebaraj, M.; Stephen, H. Milling Performance Assessment of Ti-6al-4V Under CO2 Cooling Utilizing Coated AlCrn/TiAln Insert. Mater. Manuf. Process. 2021, 37(3), 1–15. DOI: 10.1080/10426914.2021.2001510.
- Tang, L.; Guo, Y. F. Experimental Study of Special Purpose Stainless Steel on Electrochemical Machining of Electrolyte Composition. Mater. Manuf. Process. 2013, 28(4), 457–462. DOI: 10.1080/10426914.2012.746784.
- Das, A. K.; Saha, P. Machining of Circular Micro Holes by Electrochemical Micro-Machining Process. Adv. Manuf. 2013, 1(4), 314–319. DOI: 10.1007/s40436-013-0042-1.
- Chaumont-Olive, P.; Sánchez-Quesada, J.; María, A.; Pérez, C.; Cossy, J. Jo Ur Na l P Re Jo Ur Na l P Of. Tetrahedron. 2009, (110), 131932. DOI: 10.1016/j.jcms.2021.11.008.
- Vinod Kumaar, J. R.; Thanigaivelan, R. Performance of Magnetic Field-Assisted Citric Acid Electrolyte on Electrochemical Micro-Machining of SS 316L. Mater. Manuf. Process. 2020, 35(9), 969–977. DOI: 10.1080/10426914.2020.1750630.
- Sen, M.; Shan, H. S. A Review of Electrochemical Macro- to Micro-Hole Drilling Processes. Int. J. Mach. Tools Manuf. 2005, 45(2), 137–152. DOI: 10.1016/j.ijmachtools.2004.08.005.
- Sathiyamoorthy, V.; Sekar, T.; Elango, N. Optimization of Processing Parameters in ECM of Die Tool Steel Using Nanofluid by Multiobjective Genetic Algorithm. Sci. World J. 2015, 2015, 1–7. DOI: 10.1155/2015/895696.
- Santhi, M.; Ravikumar, R.; Jeyapaul, R. Optimization of Process Parameters in Electro Chemical Machining (ECM) Using DFA-Fuzzy Set Theory-TOPSIS for Titanium Alloy. Multidiscip. Model. Mater. Struct. 2013, 9(2), 243–255. DOI: 10.1108/MMMS-04-2013-0030.
- Senthilkumar, C.; Ganesan, G.; Karthikeyan, R. Parametric Optimization of Electrochemical Machining of Al/15 SiC P Composites Using NSGA-II. Trans. Nonferrous Met. Soc. China (English Ed). 2011, 21(10), 2294–2300. DOI: 10.1016/S1003-6326(11)61010-8.
- Kalaimathi, M.; Venkatachalam, G.; Makhijani, N.; Agrawal, A.; Sivakumarz, M. Investigations on Machining of Monel 400 Alloys Using Electrochemical Machining with Sodium Nitrate as Electrolyte. Appl. Mech. Mater. 2014, 592–594, 467–472. DOI: 10.4028/scientific.net/AMM.592-594.467.
- Zhang, H.; Liu, S.; Yue, W.; Xiao, H.; Zhang, P. Experimental Study of Surface Characteristic in Electrochemical Machining of 35crmo Steel. Metals (Basel). 2018, 8, 7. DOI: 10.3390/met8070509.
- Ross, N. S.; Sheeba, P. T.; Jebaraj, M.; Stephen, H. Milling Performance Assessment of Ti-6al-4V Under CO2 Cooling Utilizing Coated AlCrn/TiAln Insert. Mater. Manuf. Process. 2022, 37(3), 327–341. DOI: 10.1080/10426914.2021.2001510.
- Khanna, N.; Suri, N. M.; Agrawal, C.; Shah, P.; Krolczyk, G. M. Effect of Hybrid Machining Techniques on Machining Performance of In-House Developed Mg-PMMC. Trans. Indian Inst. Met. 2019, 72(7), 1799–1807. DOI: 10.1007/s12666-019-01652-w.
- Khamel, S.; Ouelaa, N.; Bouacha, K. Analysis and Prediction of Tool Wear, Surface Roughness and Cutting Forces in Hard Turning with CBN Tool. J. Mech. Sci. Technol. 2012, 26(11), 3605–3616. DOI: 10.1007/s12206-012-0853-1.
- Qu, N. S.; Hu, Y.; Zhu, D.; Xu, Z. Y. Electrochemical Machining of Blisk Channels with Progressive-Pressure Electrolyte Flow. Mater. Manuf. Process. 2014, 29(5), 572–578. DOI: 10.1080/10426914.2014.892974.