Clean-integrity processing and characterization of nuclear-grade austenitic steel components

References

• Poulain, T.; Mendez, J.; Henaff, G.; Baglion, L. D. E. Influence of Surface Finish in Fatigue Design of Nuclear Power Plant Components. Procedia. Eng. 2013, 66, 233–239. DOI: 10.1016/j.proeng.2013.12.078.
   Google Scholar
• Métais, T.; Courtin, S.; De Baglion, L.; Gourdin, C.; Le Roux, J. C. Code-Case Proposal to Explicitly Quantify the Interaction Between the PWR Environment and Component Surface Finish. In Volume 1A: Codes and Standards, ASME 2017 Pressure Vessels and Piping Conference; ASME: Waikoloa, Hawaii, USA; New York, USA, July 16-20, 2017; p V01AT01A020. DOI: 10.1115/PVP2017-65367.
   Google Scholar
• Morley, A.; Twite, M.; Platts, N.; McLennan, A.; Currie, C. Effect of Surface Condition on the Fatigue Life of Austenitic Stainless Steels in High Temperature Water Environments. In Volume 1A: Codes and Standards, ASME 2018 Pressure Vessels and Piping Conference; ASME: Prague, Czech Republic; New York, USA, July 15-20, 2018; p V01AT01A017. DOI: 10.1115/PVP2018-84251.
   Google Scholar
• Cheng, C. Q.; Zhao, J.; Cao, T. S.; Fu, Q. Q.; Lei, M. K.; Deng, D. W. Facile Chromaticity Approach for the Inspection of Passive Films on Austenitic Stainless Steel. Corros. Sci. 2013, 70, 235–242. DOI: 10.1016/j.corsci.2013.01.035.
   Web of Science ®Google Scholar
• Lei, M. K. Fundamental Theory on Manufacture of Main Coolant Pump in Nuclear Power Plant. China Nucl. Power. 2018, 11, 51–58.
   Google Scholar
• Sundar, R.; Ganesh, P.; Kumar, B. S.; Nagpure, D.; Kaul, C. R.; Ranganathan, K.; Bindra, K. S.; Oak, S. M.; Singh, B. Mitigation of Stress Corrosion Cracking Susceptibility of Machined 304L Stainless Steel Through Laser Peening. J. Mater. Eng. Perform. 2016, 25(9), 3710–3724. DOI: 10.1007/s11665-016-2220-3.
   Web of Science ®Google Scholar
• Lee, J.; Seo, M. G.; Hong, J. D.; Kim, T. S.; Jang, C. Low Cycle Fatigue Behavior of Hot-Bent 347 Stainless Steel in a Simulated PWR Water Environment. J. Mech. Sci. Technol. 2016, 30(11), 4931–4936. DOI: 10.1007/s12206-016-1012-x.
   Web of Science ®Google Scholar
• Cuvilliez, S.; McLennan, A.; Mottershead, K.; Mann, J.; Bruchhausen, M. Incefa-Plus Project: Lessons Learned from the Project Data and Impact on Existing Fatigue Assessment Procedures. J. Pressure Vessel Technol.-Trans. ASME. 2020, 142(6), 061507. DOI: 10.1115/PVP2020-21106.
   Web of Science ®Google Scholar
• Deshpande, N.; Vasudevan, H. Machining Induced Surface Integrity Aspects of Stainless Steels: A Review. In 2nd International Conference on Materials Manufacturing and Modelling; Elsevier: Tamil Nadu, India; Amsterdam, The Netherlands, March 29-31, 2019; Vol. 2, pp 1499–1506. DOI: 10.1016/j.matpr.2020.02.067.
   Google Scholar
• Liu, G.; Huang, C.; Zou, B.; Liu, H.; Liu, Z.; Liu, Y.; Li, C. The Modification of Corrosion Resistance of 17-4PH Stainless Steel by Cutting Process. J. Manuf. Process. 2020, 49, 447–455. DOI: 10.1016/j.jmapro.2019.11.001.
   Web of Science ®Google Scholar
• Pradhan, S.; Das, A.; Santoshwar, A.; Dharmendrabhai, T. R.; Das, S. R. Sustainability Assessment and Machinability Investigation of Austenitic Stainless Steel in Finish Turning with Advanced Ultra-Hard Sialon Ceramic Tool Under Different Cutting Environments. Silicon. 2021, 13(1), 119–147. DOI: 10.1007/s12633-020-00409-1.
   Web of Science ®Google Scholar
• Stango, R. J.; Heinrich, S. M.; Shia, C. Y. Analysis of Constrained Filament Deformation and Stiffness Properties of Brushes. J. Eng. Ind.-Trans. ASME. 1989, 111(3), 238–243. DOI: 10.1115/1.3188755.
   Google Scholar
• Luo, B.; Liu, C.; Liu, X.; Zhang, L. Effect of Expanded Graphite on the Tribological Behavior of Tin–Bronze Fiber Brushes Sliding Against Brass. Tribol. Trans. 2020, 63(1), 1–8. DOI: 10.1080/10402004.2019.1640327.
   Web of Science ®Google Scholar
• Sivaiah, P.; Chakradhar, D. Machinability Studies on 17-4 PH Stainless Steel Under Cryogenic Cooling Environment. Mater. Manuf. Processes. 2017, 32(15), 1775–1788. DOI: 10.1080/10426914.2017.1339317.
   Web of Science ®Google Scholar
• Matuszak, J.; Zaleski, K. Analysis of Deburring Effectiveness and Surface Layer Properties Around Edges of Workpieces Made of 7075 Aluminium Alloy. Aircr. Eng. 2018, 90(3), 515–523. DOI: 10.1108/AEAT-05-2016-0074.
   Google Scholar
• Ramanan, K. V.; Ramesh Babu, S.; Jebaraj, M.; Nimel Sworna Ross, K. Face Turning of Incoloy 800 Under MQL and Nano-MQL Environments. Mater. Manuf. Processes. 2021, 36(15), 1769–1780. DOI: 10.1080/10426914.2021.1944191.
   Web of Science ®Google Scholar
• Ben Rhouma, A.; Braham, C.; Fitzpatrick, M. E.; Ledion, J.; Sidhom, H. Effects of Surface Preparation on Pitting Resistance, Residual Stress, and Stress Corrosion Cracking in Austenitic Stainless Steels. J. Mater. Eng. Perform. 2001, 10(5), 507–514. DOI: 10.1361/105994901770344638.
   Web of Science ®Google Scholar
• El Shawesh, F.; El Houd, A.; Raghai, O. Role of Surface Finish and Post-Fabrication Cleaning on Localised Corrosion of Type 316L Austenitic Stainless Steel Flash Chambers. Br. Corros. J. 2001, 36(3), 184–190. DOI: 10.1179/bcj.2001.36.3.184.
   Web of Science ®Google Scholar
• Silva, V. M. A.; Camerini, C. G.; Pardal, J. M.; de Blas, J. C. G.; Pereira, G. R. Eddy Current Characterization of Cold-Worked AISI 321 Stainless Steel. J. Mater. Res. Technol. 2018, 7(3), 395–401. DOI: 10.1016/j.jmrt.2018.07.002.
   Google Scholar
• Aletdinov, A.; Mironov, S.; Korznikova, G. F.; Konkova, T.; Zaripova, R. G.; Myshlyaev, M. M.; Semiatin, S. L. Martensite-To-Austenite Reversion and Recrystallization in Cryogenically-Rolled Type 321 Metastable Austenitic Steel. Metall. and Mater. Trans.A. 2019, 50A(3), 1346–1357. DOI: 10.1007/s11661-018-5070-9.
   Web of Science ®Google Scholar
• Zhang, Z.; Wang, J.; Han, E.; Ke, W. Effects of Surface Machining by a Lathe on Microstructure of Near Surface Layer and Corrosion Behavior of SA182 Grade 304 Stainless Steel in Simulated Primary Water. Corros. Sci. Technol. 2019, 18(1), 1–7. DOI: 10.14773/CST.2019.18.1.1.
   Web of Science ®Google Scholar
• Sonawane, G. D.; Sargade, V. G. Machinability Study of Duplex Stainless Steel 2205 During Dry Turning. Int. J. Precis. Eng. Manuf. Green Technol. 2020, 21(5), 969–981. DOI: 10.1007/s12541-019-00305-8.
   Google Scholar
• M’saoubi, R.; Outeiro, J. C.; Chandrasekaran, H.; Dillon, O. W., Jr.; Jawahir, I. S. A Review of Surface Integrity in Machining and Its Impact on Functional Performance and Life of Machined Products. Int. J. Sustainable Manuf. 2008, 1(1/2), 203–236. DOI: 10.1504/IJSM.2008.019234.
   Google Scholar
• Lei, M. K.; Zhu, X. P.; Li, Y. P.; Guo, D. M. Significance of Surface Integrity on High-Performance Manufacturing by Surface Modification. Int. J. Adv. Manuf. Tech. 2016, 82(9–12), 1831–1842. DOI: 10.1007/s00170-015-7467-6.
   Web of Science ®Google Scholar
• Oliveira, A. C. D.; Oliveira, M. C. L. D.; Ríos, C. T.; Antunes, R. A. The Effect of Mechanical Polishing and Dinishing on the Corrosion Resistance of AISI 304 Stainless Steel. Corros. Eng. Sci. Technol. 2016, 51(6), 416–428. DOI: 10.1080/1478422X.2015.1131493.
   Web of Science ®Google Scholar