Effect of Cryo-treatment of wires on machining performance of WEDM

References

• Sharma, N.; Khanna, R.; Gupta, R. D. WEDM Process Variables Investigation for HSLA by Response Surface Methodology and Genetic Algorithm. Eng. Sci. Technol. Int. J. 2015, 18(2), 171–177. DOI: 10.1016/j.jestch.2014.11.004.
   Google Scholar
• Joshi, A. Y.; Joshi, A. Y. A Systematic Review on Powder Mixed Electrical Discharge Machining. Heliyon. 2019, 5(12), e02963. DOI: 10.1016/j.heliyon.2019.e02963.
   PubMed Web of Science ®Google Scholar
• Saleh, M.; Anwar, S.; El-Tamimi, A.; Mohammed, M. K.; Ahmad, S. Milling Microchannels in Monel 400 Alloy by Wire EDM: An Experimental Analysis. Micromachines. 2020, 11, 5. DOI: 10.3390/MI11050469.
   Web of Science ®Google Scholar
• Ganesh, M.; Natesan, A. Effect of Cryogenic Cooling in Deep Hole Drilling Process–A Stride in the Direction of Green Manufacturing. Mater. Manuf. Process. 2022, 37(13), 1566–1577. DOI: 10.1080/10426914.2022.2030878.
   Web of Science ®Google Scholar
• Pimenov, D. Y.; Mia, M.; Gupta, M. K.; Machado, A. R.; Tomaz, Í. V.; Sarikaya, M.; Wojciechowski, S.; Mikolajczyk, T.; Kaplonek, W. Improvement of Machinability of Ti and Its Alloys Using Cooling-Lubrication Techniques: A Review and Future Prospect. J. Mater. Res. Technol. 2021, 11, 719–753. DOI: 10.1016/j.jmrt.2021.01.031.
   Google Scholar
• Singh Grewal, G.; Parkash Dhiman, D. Effect of Deep Cryogenic Treatment on Copper Electrode for Non-Traditional Electric Discharge Machining (EDM). Mech. Sci. 2019, 10(2), 413–427. DOI: 10.5194/ms-10-413-2019.
   Web of Science ®Google Scholar
• Kapoor, J.; Khamba, J. S.; Singh, S. An Investigation on Wear of Shallow Cryogenic Treated Wire in WEDM. Mater. Sci. Forum. 2011, 701, 31–42. DOI: 10.4028/ww.scientific.net/MSF.701.31.
   Google Scholar
• Cardoso, P. H. S.; Israel, C. L.; da Silva, M. B.; Klein, G. A.; Soccol, L. Effects of Deep Cryogenic Treatment on Microstructure, Impact Toughness and Wear Resistance of an AISI D6 Tool Steel. Wear. 2020, 456–457(June), 203382. DOI: 10.1016/j.wear.2020.203382.
   Google Scholar
• Gupta, A.; Kumar, R.; Kumar, H.; Garg, H. Materials Today: Proceedings Comparative Performance of Pure Vegetable Oil and Al 2 O 3 Based Vegetable Oil During MQL Turning of AISI 4130. Mater. Today Proc. 2020, 28, 1662–1666. DOI: 10.1016/j.matpr.2020.05.019.
   Google Scholar
• Arun Kumar, N. E.; Subramanian, M.; Suresh Babu, A.; Elakkiyadasan, R. Performance Evaluation of Cryogenic Treated and Untreated Brass Electrode in Wire-EDM. Mater. Manuf. Process. 2023, 38(7), 816–827. DOI: 10.1080/10426914.2023.2165664.
   Web of Science ®Google Scholar
• Gill, S. S.; Singh, J. Effect of Deep Cryogenic Treatment on Machinability of Titanium Alloy (Ti-6246) in Electric Discharge Drilling. Mater. Manuf. Process. 2010, 25(6), 378–385. DOI: 10.1080/10426910903179914.
   Web of Science ®Google Scholar
• Rohilla, V. K.; Goyal, R.; Kumar, A.; Singla, Y. K.; Sharma, N. Surface Integrity Analysis of Surfaces of Nickel-Based Alloys Machined with Distilled Water and Aluminium Powder-Mixed Dielectric Fluid After WEDM. Int. J. Adv. Manuf. Technol. 2021, 116(7–8), 2467–2472. DOI: 10.1007/s00170-021-07610-5.
   Web of Science ®Google Scholar
• Kumar, V.; Jangra, K. K.; Kumar, V.; Sharma, N. GA-Based Optimisation Using RSM in WEDM of Nimonic-90: A Nickel-Based Super Alloy. Int. J. Ind. Syst. Eng. 2018, 28(1), 53–69. DOI: 10.1504/IJISE.2018.088564.
   Google Scholar
• Kumar, V.; Jangra, K. K.; Kumar, V.; Sharma, N. WEDM of Nickel Based Aerospace Alloy: Optimization of Process Parameters and Modelling. Int. J. Interact. Des. Manuf. 2017, 11(4), 917–929. DOI: 10.1007/s12008-016-0298-3.
   Google Scholar
• Nayak, B. B.; Mahapatra, S. S. Optimization of WEDM Process Parameters Using Deep Cryo-Treated Inconel 718 as Work Material. Eng. Sci. Technol. Int. J. 2016, 19(1), 161–170. DOI: 10.1016/j.jestch.2015.06.009.
   Google Scholar
• Jurkovic, Z.; Cukor, G.; Brezocnik, M.; Brajkovic, T. A Comparison of Machine Learning Methods for Cutting Parameters Prediction in High Speed Turning Process. J. Intell. Manuf. 2018, 29(8), 1683–1693. DOI: 10.1007/s10845-016-1206-1.
   Web of Science ®Google Scholar
• Kumar, N. E. A.; Babu, A. S.; Sathishkumar, N.; Pradeep Kumar, C. Influence of Near-Dry Ambiance on WEDM of Monel Superalloy. Mater. Manuf. Process. 2021, 36(7), 827–835. DOI: 10.1080/10426914.2020.1866191.
   Web of Science ®Google Scholar
• Arun Kumar, N. E.; Sathishkumar, N.; Raviraj, E.; Pathri Narayanan, M.; Eugene, R. Influence of Near Dry Wirecut Electrical Discharge Machining Parameters on Kerf Width in Monel 400. Mater. Today Proc. 2020, 39(xxxx), 1519–1526. DOI: 10.1016/j.matpr.2020.05.471.
   Google Scholar
• Ganesh, M.; Arunkumar, N.; E, K.; S, R. Experimental Investigation of Friction and Wear Behavior of AL7075-TiO 2 -B 4 C Using RSM, ANN and Desirability Function. Int. J. Veh. Struct. Syst. 2022, 14(1), 41–46. DOI: 10.4273/ijvss.14.1.10.
   Google Scholar