Analysis of drilling behavior of flax/PP composites

References

• Huang, K.; Tran, L. Q. N.; Kureemun, U.; Teo, W. S.; Lee, H. P. Vibroacoustic Behavior and Noise Control of Flax Fiber-Reinforced Polypropylene Composites. J. Nat. Fibers. 2019, 16(5), 729–743. DOI: 10.1080/15440478.2018.1433096.
   Web of Science ®Google Scholar
• Palanisamy, D.; Venkateshwarapuram Rengaswami, G. D. Novel Manufacturing Process for Improving Mechanical Properties of Flax/PP Composites. Mater. Manuf. Process. 2018, 33(5), 580–586. DOI: 10.1080/10426914.2017.1388525.
   Web of Science ®Google Scholar
• Haris, A.; Kureemun, U.; Tran, L. Q. N.; Lee, H. P. Noise Reduction Capability of Hybrid Flax Fabric-Reinforced Polypropylene-Based Composites. Adv. Compos. Mater. 2019, 28(4), 335–346. DOI: 10.1080/09243046.2018.1533347.
   Web of Science ®Google Scholar
• Goud, V.; Khan, A. N.; Ramasamy, A.; Das, A.; Kalyanasundaram, D. Mechanical Properties of Flax-Polypropylene Composites from Dry Flexible Towpregs: Influence of Radial Position of Flax Fibers in the Towpreg. J. Nat. Fibers. 2022, 19(17), 15225–15237. DOI: 10.1080/15440478.2022.2120591.
   Web of Science ®Google Scholar
• Yu, T.; Wu, C. M.; Wang, C. J.; Rwei, S. P. Effects of Surface Modifications on the Interfacial Bonding of Flax/β-Polypropylene Composites. Compos. Interfaces. 2013, 20(7), 483–496. DOI: 10.1080/15685543.2013.807168.
   Web of Science ®Google Scholar
• Lu, S. H.; Xie, L.; Steuernagel, L.; Ziegmann, G. Effects of Interfacial Enhancing by Aldehyde-Based Surface Modification of Flax Fibers on Their Polymer Composites. Soft. Mater. 2013, 11(1), 108–115. DOI: 10.1080/1539445X.2011.591866.
   Web of Science ®Google Scholar
• Bar, M.; Alagirusamy, R.; Das, A. Development of Flax-PP Based Twist-Less Thermally Bonded Roving for Thermoplastic Composite Reinforcement. J. Text. Inst. 2019, 110(10), 1369–1379. DOI: 10.1080/00405000.2019.1610997.
   Web of Science ®Google Scholar
• Haris, A.; Kureemun, U.; Tran, L. Q. N.; Lee, H. P. Water Uptake and Its Effects on Mechanical and Acoustic Properties of Flax/Polypropylene Composite. J. Nat. Fibers. 2021, 18(9), 1344–1358. DOI: 10.1080/15440478.2019.1691112.
   Web of Science ®Google Scholar
• Dissanayake, N. P. J.; Summerscales, J.; Grove, S. M.; Singh, M. M. Energy Use in the Production of Flax Fiber for the Reinforcement of Composites. J. Nat. Fibers. 2009, 6(4), 331–346. DOI: 10.1080/15440470903345784.
   Web of Science ®Google Scholar
• Kannan, G.; Thangaraju, R. Recent Progress on Natural Lignocellulosic Fiber Reinforced Polymer Composites: A Review. J. Nat. Fibers. 2022, 19(13), 7100–7131. DOI: 10.1080/15440478.2021.1944425.
   Web of Science ®Google Scholar
• Verma, D.; Goh, K. L.; Vimal, V. Interfacial Studies of Natural Fiber-Reinforced Particulate Thermoplastic Composites and Their Mechanical Properties. J. Nat. Fibers. 2022, 19(6), 2299–2326. DOI: 10.1080/15440478.2020.1808147.
   Web of Science ®Google Scholar
• Xiao, X.; Cheng, M.; Zhong, Y. Effects of Alkali Treatment on the Mechanical Properties and Moisture Absorption Behavior of Flax/Polypropylene Composites. J. Nat. Fibers. 2022, 19(14), 9201–9222. DOI: 10.1080/15440478.2021.1982813.
   Web of Science ®Google Scholar
• Shenoy Heckadka, S.; Nayak, S. Y.; Joe, T.; Zachariah, N. J.; Gupta, S.; Kumar, N. V. A.; Matuszewska, M. Comparative Evaluation of Chemical Treatment on the Physical and Mechanical Properties of Areca Frond, Banana, and Flax Fibers. J. Nat. Fibers. 2020, 1–13. DOI: 10.1080/15440478.2020.1784817.
   Google Scholar
• Aly, M.; Hashmi, M. S. J.; Olabi, A. G.; Benyounis, K. Y.; Messeiry, M.; Hussain, A. I.; Abadir, E. F. Optimization of Alkaline Treatment Conditions of Flax Fiber Using Box-Behnken Method. J. Nat. Fibers. 2012, 9(4), 256–276. DOI: 10.1080/15440478.2012.738036.
   Web of Science ®Google Scholar
• Komal, U. K.; Singh, I. Sustainable Treatments of Pineapple Leaf Fibers for Polylactic Acid Based Biocomposites. J. Nat. Fibers. 2022, 19(16), 13438–13456. DOI: 10.1080/15440478.2022.2095550.
   Web of Science ®Google Scholar
• Parodo, G.; Rubino, F.; Sorrentino, L.; Turchetta, S. Temperature Analysis in Fiber Metal Laminates Drilling: Experimental and Numerical Results. Polym. Compos. 2022, 43(10), 7600–7615. DOI: 10.1002/pc.26864.
   Web of Science ®Google Scholar
• Srinivasan, T.; Palanikumar, K.; Rajagopal, K.; Latha, B. Optimization of Delamination Factor in Drilling GFR–Polypropylene Composites. Mater. Manuf. Process. 2017, 32(2), 226–233. DOI: 10.1080/10426914.2016.1151038.
   Web of Science ®Google Scholar
• Malik, K.; Ahmad, F.; Gunister, E. Drilling Performance of Natural Fiber Reinforced Polymer Composites: A Review. J. Nat. Fibers. 2021, 19(12), 4761–4779. DOI: https://doi.org/10.1080/15440478.2020.1870624.
   Web of Science ®Google Scholar
• Raj, S. S. R.; Dhas, J. E. R.; Jesuthanam, C. P. Challenges on Machining Characteristics of Natural Fiber-Reinforced Composites – a Review. J. Reinf. Plast. Compos. 2020, 40(1–2), 41–69. DOI: https://doi.org/10.1177/0731684420940773.
   Web of Science ®Google Scholar
• Prisco, U.; Impero, F.; Rubino, F. Peck Drilling of CFRP/Titanium Stacks: Effect of Tool Wear on Hole Dimensional and Geometrical Accuracy. Prod. Eng. 2019, 13(5), 529–538. DOI: 10.1007/s11740-019-00915-1.
   Google Scholar
• Singh, S. P.; Dutt, A.; Hirwani, C. K. Experimental and Numerical Analysis of Different Natural Fiber Polymer Composite. Mater. Manuf. Process. 2022, 38(3), 322–332. DOI: https://doi.org/10.1080/10426914.2022.2136379.
   Web of Science ®Google Scholar
• Avinash, S.; Irulappasamy, S.; Selvan, C. P.; Sultan, M. T. H.; Hua, L. S.; Munde, Y. Abrasive Machining Characteristics and Prediction Model for Sisal/Polyester Sandwich Composite. J. Nat. Fibers. 2022, 19(14), 7956–7972. DOI: 10.1080/15440478.2021.1958427.
   Web of Science ®Google Scholar
• Zhou, L.; Ke, Y.; Dong, H.; Chen, Z.; Gao, K. Hole Diameter Variation and Roundness in Dry Orbital Drilling of CFRP/Ti Stacks. Int. J. Adv. Manuf. Technol. 2016, 87(1–4), 811–824. DOI: 10.1007/s00170-016-8528-1.
   Web of Science ®Google Scholar
• Ahmad, N.; Khan, S. A.; Raza, S. F. Influence of Hole Diameter, Workpiece Thickness, and Tool Surface Condition on Machinability of CFRP Composites in Orbital Drilling: A Case of Workpiece Rotation. Int. J. Adv. Manuf. Technol. 2019, 103(5–8), 2007–2015. DOI: 10.1007/s00170-019-03713-2.
   Web of Science ®Google Scholar
• Tewari, R.; Singh, M. K.; Zafar, S.; Powar, S. Parametric Optimization of Laser Drilling of Microwave-Processed Kenaf/HDPE Composite. Polym. Polym. Compos. 2021, 29(3), 176–187. DOI: 10.1177/0967391120905705.
   Web of Science ®Google Scholar
• Rathod, D.; Rathod, M.; Patel, R.; Shahabaz, S. M.; Shetty, S. D.; Shetty, N. A Review on Strengthening, Delamination Formation and Suppression Techniques During Drilling of CFRP Composites. Cogent Eng. 2021, 8, 1. DOI: 10.1080/23311916.2021.1941588.
   Web of Science ®Google Scholar
• Rezghi Maleki, H.; Hamedi, M.; Kubouchi, M.; Arao, Y. Experimental Investigation on Drilling of Natural Flax Fiber-Reinforced Composites. Mater. Manuf. Process. 2019, 34(3), 283–292. DOI: 10.1080/10426914.2018.1532584.
   Web of Science ®Google Scholar
• Chegdani, F.; El Mansori, M. Friction Scale Effect in Drilling Natural Fiber Composites. Tribol. Int. 2018, 119, 622–630. DOI: 10.1016/J.TRIBOINT.2017.12.006.
   Web of Science ®Google Scholar
• Bajpai, P. K.; Singh, I. Drilling Behavior of Sisal Fiber-Reinforced Polypropylene Composite Laminates. J. Reinf. Plast. Compos. 2013, 32(20), 1569–1576. DOI: 10.1177/0731684413492866.
   Web of Science ®Google Scholar
• Rakesh, P. K.; Singh, I.; Kumar, D. Drilling of Composite Laminates with Solid and Hollow Drill Point Geometries. J. Compos. Mater. 2012, 46(25), 3173–3180. DOI: 10.1177/0021998312436997.
   Web of Science ®Google Scholar
• Díaz-Álvarez, A.; Díaz-Álvarez, J.; Santiuste, C.; Miguélez, M. H. Experimental and Numerical Analysis of the Influence of Drill Point Angle When Drilling Biocomposites. Compos. Struct. 2019, 209(October 2018), 700–709. DOI: 10.1016/j.compstruct.2018.11.018.
   Google Scholar
• Díaz-Álvarez, A.; Rubio-López, Á.; Santiuste, C.; Miguélez, M. H. Experimental Analysis of Drilling Induced Damage in Biocomposites. Text. Res. J. 2018, 88(22), 2544–2558. DOI: 10.1177/0040517517725118.
   Web of Science ®Google Scholar
• Debnath, K.; Singh, I.; Dvivedi, A. Drilling Characteristics of Sisal Fiber-Reinforced Epoxy and Polypropylene Composites. Mater. Manuf. Process. 2014, 29(11–12), 1401–1409. DOI: 10.1080/10426914.2014.941870.
   Web of Science ®Google Scholar
• Debnath, K.; Sisodia, M.; Kumar, A.; Singh, I. Damage-Free Hole Making in Fiber-Reinforced Composites: An Innovative Tool Design Approach. Mater. Manuf. Process. 2016, 31(10), 1400–1408. DOI: 10.1080/10426914.2016.1140191.
   Web of Science ®Google Scholar
• Kalidas, V. K.; Loganathan, T. G.; Abu Hassan, S. B.; Chadalavala, H. A Comparative Study on Drill Tool Effect on Vibration and Delamination Characteristics of FRPs. J. Nat. Fibers. 2022, 19(16), 13943–13957. DOI: 10.1080/15440478.2022.2113848.
   Web of Science ®Google Scholar
• Özdemir, B.; Yardimeden, A.; Bahce, E.; Kilickap, E.; Emir, E. Analysis of Drilling Behaviour in Jute Fibres Reinforced Natural Composites. J. Nat. Fibers. 2023, 20, 1. DOI: 10.1080/15440478.2022.2159608.
   Web of Science ®Google Scholar
• Kumar, R. S.; Mohanraj, M.; Natarajan, P.; Julias, A. A.; Ravishankar, S. Experimental Study on the Drilling Parameter Analysis of Banana Fiber Reinforced Vajram Mixed Phenolic Resin Composite Laminates. J. Nat. Fibers. 2022, 19(15), 9827–9844. DOI: 10.1080/15440478.2021.1993412.
   Web of Science ®Google Scholar
• Gokulkumar, S.; Thyla, P. R.; ArunRamnath, R.; Karthi, N. Acoustical Analysis and Drilling Process Optimization of Camellia Sinensis/Ananas Comosus/GFRP/Epoxy Composites by TOPSIS for Indoor Applications. J. Nat. Fibers. 2021, 18(12), 2284–2301. DOI: 10.1080/15440478.2020.1726240.
   Web of Science ®Google Scholar
• Alarifi, I. M. A Review on Factors Affecting Machinability and Properties of Fiber-Reinforced Polymer Composites. J. Nat. Fibers. 2023, 20, 1. DOI: 10.1080/15440478.2022.2154304.
   Web of Science ®Google Scholar
• Debnath, K.; Singh, I.; Srivatsan, T. S. An Innovative Tool for Engineering Good-Quality Holes in Composite Laminates. Mater. Manuf. Process. 2017, 32(9), 952–957. DOI: 10.1080/10426914.2016.1221084.
   Web of Science ®Google Scholar
• Patel, K.; Gohil, P. P.; Chaudhary, V. Investigations on Drilling of Hemp/Glass Hybrid Composites. Mater. Manuf. Process. 2018, 33(15), 1714–1725. DOI: 10.1080/10426914.2018.1453150.
   Web of Science ®Google Scholar
• Aleksendrić, D.; Bellini, C.; Carlone, P.; Ćirović, V.; Rubino, F.; Sorrentino, L. Neural-Fuzzy Optimization of Thick Composites Curing Process. Mater. Manuf. Process. 2019, 34(3), 262–273. DOI: 10.1080/10426914.2018.1512116.
   Web of Science ®Google Scholar
• Kansal, A.; Dvivedi, A.; Kumar, P. Development and Performance Study of Biomedical Porous Zinc Scaffold Manufactured by Using Additive Manufacturing and Microwave Sintering. Mater. Manuf. Process. 2022, 1–13. DOI: 10.1080/10426914.2022.2089896.
   Web of Science ®Google Scholar
• Latha, B.; Senthilkumar, V. S. Analysis of Thrust Force in Drilling Glass Fiber-Reinforced Plastic Composites Using Fuzzy Logic. Mater. Manuf. Process. 2009, 24(4), 509–516. DOI: 10.1080/10426910802714688.
   Web of Science ®Google Scholar
• Wolday, A. K.; Ramteke, M. Optimisation of Methanol Distillation Using GA and Neural Network Hybrid. Mater. Manuf. Process. 2023. DOI: 10.1080/10426914.2023.2219306.
   Web of Science ®Google Scholar
• Miriyala, S. S.; Mitra, K. Multi-Objective Optimization of Iron Ore Induration Process Using Optimal Neural Networks. Mater. Manuf. Process. 2020, 35(5), 537–544. DOI: 10.1080/10426914.2019.1643476.
   Web of Science ®Google Scholar
• Manoj, A.; Miriyala, S. S.; Mitra, K. Multi-Objective Optimization Through a Novel Bayesian Approach for Industrial Manufacturing of Polyvinyl Acetate. Mater. Manuf. Process. 2023. DOI: 10.1080/10426914.2023.2195915.
   Web of Science ®Google Scholar
• Venkata Rao, R.; Kalyankar, V. D. Parameter Optimization of Machining Processes Using a New Optimization Algorithm. Mater. Manuf. Process. 2012, 27(9), 978–985. DOI: 10.1080/10426914.2011.602792.
   Web of Science ®Google Scholar
• Jayabal, S.; Natarajan, U. Optimization of Thrust Force, Torque, and Tool Wear in Drilling of Coir Fiber-Reinforced Composites Using Nelder-Mead and Genetic Algorithm Methods. Int. J. Adv. Manuf. Technol. 2010, 51(1–4), 371–381. DOI: 10.1007/s00170-010-2605-7.
   Web of Science ®Google Scholar
• Lilly Mercy, J.; Sivashankari, P.; Sangeetha, M.; Kavitha, K. R.; Prakash, S. Genetic Optimization of Machining Parameters Affecting Thrust Force During Drilling of Pineapple Fiber Composite Plates-An Experimental Approach. J. Nat. Fibers. 2022, 19(5), 1729–1740. DOI: 10.1080/15440478.2020.1788484.
   Web of Science ®Google Scholar
• Belaadi, A.; Laouici, H.; Bourchak, M. Mechanical and Drilling Performance of Short Jute Fibre-Reinforced Polymer Biocomposites: Statistical Approach. Int. J. Adv. Manuf. Technol. 2020, 106(5–6), 1989–2006. DOI: 10.1007/s00170-019-04761-4.
   Web of Science ®Google Scholar
• Belaadi, A.; Boumaaza, M.; Alshahrani, H.; Bourchak, M. Delamination in Drilling of Jute/Cork ‑ Reinforced Polymer Biosandwich Materials: Optimization by Response Surface Methodology and Genetic Algorithm. Int. J. Adv. Manuf. Technol. 2022, 122(3–4), 2095–2111. DOI: https://doi.org/10.1007/s00170-022-10001-z.
   Web of Science ®Google Scholar
• Rout, A.; BBVL, D.; Biswal, B. B. Optimization of Process Variables of Laser Sensor Assisted Robotic GMAW Process for Mild Steel Material. Mater. Manuf. Process. 2020, 35(15), 1690–1700. DOI: 10.1080/10426914.2020.1784934.
   Web of Science ®Google Scholar
• Devarasiddappa, D.; Chandrasekaran, M. Experimental Investigation and Optimization of Sustainable Performance Measures During Wire-Cut EDM of Ti-6Al-4V Alloy Employing Preference-Based TLBO Algorithm. Mater. Manuf. Process. 2020, 35(11), 1204–1213. DOI: 10.1080/10426914.2020.1762211.
   Web of Science ®Google Scholar
• Jain, S.; Parashar, V. WEDM Process Parameters Optimization by Preference-Based CS & PSO Algorithm for LCP. Mater. Manuf. Process. 2023, 1–20. DOI: 10.1080/10426914.2023.2165669.
   Web of Science ®Google Scholar
• Gupta, M. K.; Sood, P. K.; Sharma, V. S. Machining Parameters Optimization of Titanium Alloy Using Response Surface Methodology and Particle Swarm Optimization Under Minimum-Quantity Lubrication Environment. Mater. Manuf. Process. 2016, 31(13), 1671–1682. DOI: 10.1080/10426914.2015.1117632.
   Web of Science ®Google Scholar
• Rao, R. V.; Pawar, P. J.; Davim, J. P. Parameter Optimization of Ultrasonic Machining Process Using Nontraditional Optimization Algorithms. Mater. Manuf. Process. 2010, 25(10), 1120–1130. DOI: 10.1080/10426914.2010.489788.
   Web of Science ®Google Scholar
• Bhatnagar, N.; Singh, I.; Nayak, D. Damage Investigation in Drilling of Glass Fiber Reinforced Plastic Composite Laminates. Mater. Manuf. Process. 2004, 19(6), 995–1007. DOI: 10.1081/AMP-200034486.
   Web of Science ®Google Scholar
• Sharma, H.; Komal, U. K.; Singh, I.; Kumar, D.; Misra, J. P. Artificial Intelligence Based Tool for Predicting of Damage During Drilling of Frp’s. 21st ICCM Int. Conf. Compos. Mater. 2017, 20–25.
   Google Scholar
• Erturk, A. T.; Vatansever, F.; Yarar, E.; Guven, E. A.; Sinmazcelik, T. Effects of Cutting Temperature and Process Optimization in Drilling of GFRP Composites. J. Compos. Mater. 2021, 55(2), 235–249. DOI: 10.1177/0021998320947143.
   Web of Science ®Google Scholar
• Caprino, G.; Tagliaferri, V. Damage Development in Drilling Glass Fibre Reinforced Plastics. Int. J. Mach. Tools Manuf. 1995, 35(6), 817–829. DOI: 10.1016/0890-6955(94)00055-O.
   Web of Science ®Google Scholar
• Chaudhary, V.; Gohil, P. P. Investigations on Drilling of Bidirectional Cotton Polyester Composite. Mater. Manuf. Process. 2016, 31(7), 960–968. DOI: 10.1080/10426914.2015.1059444.
   Web of Science ®Google Scholar
• Lotfi, A.; Li, H.; Dao, D. V. Drilling Behavior of Flax/Poly(lactic Acid) Bio-Composite Laminates: An Experimental Investigation. J. Nat. Fibers. 2020, 17(9), 1264–1280. DOI: 10.1080/15440478.2018.1558158.
   Web of Science ®Google Scholar
• Ameur, M. F.; Hadj Djilani, A.; Zitoune, R.; V, K.; Sheikh-Ahmad, J.; Toubal, L.; Bougherara, H. Experimental and Numerical Investigations of the Damages Induced While Drilling Flax/Epoxy Composite. J. Compos. Mater. 2022, 56(2), 295–312. DOI: 10.1177/00219983211055825.
   Web of Science ®Google Scholar
• Pawar, P. J.; Rao, R. V. Parameter Optimization of Machining Processes Using Teaching-Learning-Based Optimization Algorithm. Int. J. Adv. Manuf. Technol. 2013, 67(5–8), 995–1006. DOI: 10.1007/s00170-012-4524-2.
   Web of Science ®Google Scholar