Effect of fill pattern on flexural performance of FDM printed PLA

References

• Daminabo, S. C.; Goel, S.; Grammatikos, S. A.; Nezhad, H. Y.; Thakur, V. K. Fused Deposition Modeling Based Additive Manufacturing (3D Printing): Techniques for Polymer Material Systems. Mater. Today Chem. 2020, 16, 1002482. DOI: 10.1016/j.mtchem.2020.100248.
   Web of Science ®Google Scholar
• Alizadeh-Osgouei, M.; Li, Y.; Vahid, A.; Ataee, A.; Wen, C. High Strength Porous PLA Gyroid Scaffolds Manufactured via Fused Deposition Modeling for Tissue Engineering Applications. Smart Mater Med. 2021, 2, 15–25. DOI: 10.1016/j.smaim.2020.10.003.
   Google Scholar
• Wu, D.; Spanou, A.; Diez-Escudero, A. P. C.; Persson, C. 3D Printed PLA/HA Composite Structures as Synthetic Trabecular Bone: A Feasibility Study Using Fused Deposition Modeling. J. Mech. Behav. Biomed. Mater. 2020, 103, 03608. DOI: 10.1016/j.jmbbm.2019.103608.
   Web of Science ®Google Scholar
• Sujithra, R.; Saritha, D. Effect of Fill Pattern and Printing Speed on Friction Characteristics of FDM Printed Polylactic Acid Polymer. Adv. Mater. Technol. 2022, 2021(sup3), 1583–1592. DOI: 10.1080/2374068X.2021.1948707.
   Google Scholar
• Lay, M.; Thajudin, M. L. N.; Hamid, Z. A. A.; Rusli, A.; Abdullah, M. K.; Shuib, R. K. Comparison of Physical and Mechanical Properties of PLA, ABS and Nylon 6 Fabricated Using Fused Deposition Modeling and Injection Molding. Compos. B Eng. 2019, 176, 107341. DOI: 10.1016/j.compositesb.2019.107341.
   Web of Science ®Google Scholar
• Gao, X.; Qi, S.; Kuang, X.; Su, Y.; Li, J.; Wang, D. Fused Filament Fabrication of Polymer Materials: A Review of Interlayer Bond. Addit. Manuf. 2021, 37, 101658. DOI: 10.1016/j.addma.2020.101658.
   Web of Science ®Google Scholar
• Zhang, Y.; Phil, J.; Seung, C.; Moon, K. Effect of Geometry on the Mechanical Response of Additively Manufactured Polymer. Polym. Test. 2021, 100, 107245. DOI: 10.1016/j.polymertesting.2021.107245.
   Web of Science ®Google Scholar
• Popescu, D.; Zapciu, A.; Amza, C.; Baciu, F.; Marinescu, R. FDM Process Parameters Influence Over the Mechanical Properties of Polymer Specimens: A Review. Polym. Test. 2018, 69, 157–166. DOI: 10.1016/j.polymertesting.2018.05.020.
   Web of Science ®Google Scholar
• Wang, S.; Ma, Y.; Deng, Z.; Zhang, S.; Cai, J. Effects of Fused Deposition Modeling Process Parameters on Tensile, Dynamic Mechanical Properties of 3D Printed Polylactic Acid Materials. Polym. Test. 2020, 86, 106483. DOI: 10.1016/j.polymertesting.2020.106483.
   Web of Science ®Google Scholar
• Song, Y.; Li, Y.; Song, W.; Yee, K.; Lee, K.-Y.; Tagarielli, V. L. Measurements of the Mechanical Response of Unidirectional 3D-Printed PLA. Mater. Des. 2017, 123, 154–164. DOI: 10.1016/j.matdes.2017.03.051.
   Web of Science ®Google Scholar
• Koch, C.; Hulle, L. V.; Rudolph, N. Investigation of Mechanical Anisotropy of the Fused Filament Fabrication Process via Customized Tool Path Generation. Addit. Manuf. 2017, 16, 138–145. DOI: 10.1016/j.addma.2017.06.003.
   Web of Science ®Google Scholar
• Chacón, J. M.; Caminero, M. A.; García-Plaza, E.; Núñez, P. J. Additive Manufacturing of PLA Structures Using Fused Deposition Modelling: Effect of Process Parameters on Mechanical Properties and Their Optimal Selection. Mater. Des. 2017, 124, 143–157. DOI: 10.1016/j.matdes.2017.03.065.
   Web of Science ®Google Scholar
• Tang, C.; Liu, J.; Yang, Y.; Liu, Y.; Jiang, S.; Hao, W. Effect of Process Parameters on Mechanical Properties of 3D Printed PLA Lattice Structures. Compos. C. 2020, 3, 100076. DOI: 10.1016/j.jcomc.2020.100076.
   Google Scholar
• Azadi, M.; Dadashi, A.; Dezianian, S.; Kianifar, M.; Torkaman, S.; Chiyani, M. High-Cycle Bending Fatigue Properties of Additive-Manufactured ABS and PLA Polymers Fabricated by Fused Deposition Modeling 3D-Printing. Forces In Mech. 2021, 3, 100016. DOI: 10.1016/j.finmec.2021.100016.
   Google Scholar
• Lubomdo, C.; Huneault, M. A. Effect of Infill Patterns on the Mechanical Performance of Lightweight 3D-Printed Cellular PLA Parts. Mater. Today Commun. 2018, 17, 214–228. DOI: 10.1016/j.mtcomm.2018.09.017.
   Web of Science ®Google Scholar
• Mohamed, O. A.; Masood, S. H.; Bhowmik, J. L. Experimental Investigations of Process Parameters Influence on Rheological Behavior and Dynamic Mechanical Properties of FDM Manufactured Parts. Mater. Manuf. 2016, 31(15), 1983–1994. DOI: 10.1080/10426914.2015.1127955.
   Web of Science ®Google Scholar
• Penumakal, P. K.; Santo, J.; Thomas, A. A Critical Review on the Fused Deposition Modeling of Thermoplastic Polymer Composites. Compos. B Eng. 2020, 201, 108336. DOI: 10.1016/j.compositesb.2020.108336.
   Web of Science ®Google Scholar
• Sathies, T.; Senthil, P.; Anoop, M. S. A Review on Advancements in Applications of Fused Deposition Modeling Process. Rapid Prototyp. J. 2020, 26(4), 669–687. DOI: 10.1108/RPJ-08-2018-0199.
   Web of Science ®Google Scholar
• Akhoundi, B.; Behravesh, A. H. Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products. Exp. Mech. 2019, 59(6), 883–897. DOI: 10.1007/s11340-018-00467-y.
   Web of Science ®Google Scholar
• Rankin, T. M.; Giovinco, N. A.; Cucher, D. J.; Watts, G.; Hurwitz, B.; Armstrong, D. G. Three-Dimensional Printing Surgical Instruments: Are We There Yet. J. Surg. Res. 2014, 189(2), 193–197. DOI: 10.1016/j.jss.2014.02.020.
   PubMed Web of Science ®Google Scholar
• George, M.; Aroom, K. R.; Hawes, H. G.; Gill, B. S.; Love, J. 3D Printed Surgical Instruments: The Design and Fabrication Process. World J. Surg. 2017, 41, 314–319. DOI: 10.1007/s00268-016-3814-5.
   PubMedGoogle Scholar
• Gomez-Gras, G.; Jerez-Mesa, R.; Travieso-Rodriguez, J. A.; Lluma-Fuentes, J. Fatigue Performance of Fused Filament Fabrication PLA Specimens. Mater. Des. 2018, 140, 278–285. DOI: 10.1016/j.matdes.2017.11.072.
   Web of Science ®Google Scholar
• Aloyaydi, B.; Sivasankaran, S.; Mustafa, A. Investigation of Infill Patterns on Mechanical Response of 3D Printed Polylactic Acid. Polym. Test. 2020, 87, 106557. DOI: 10.1016/j.polymertesting.2020.106557.
   Web of Science ®Google Scholar
• Birosz, M. T.; Ledenyák, D.; M, A. Effect of FDM Infill Patterns on Mechanical Properties. Polym. Test. 2022, 113, 107654. DOI: 10.1016/j.polymertesting.2022.107654.
   Web of Science ®Google Scholar
• Ayatollahi, M. R.; Nabavi-Kivi, A.; Bahrami, B.; Yahya, M. Y.; Khosravani, M. R. The Influence of In-Plane Raster Angle on Tensile and Fracture Strengths of 3D-Printed PLA Specimens. Eng. Fract. Mech. 2020, 237, 107225. DOI: 10.1016/j.engfracmech.2020.107225.
   Web of Science ®Google Scholar
• Kiendl, J.; Gao, C. Controlling Toughness and Strength of FDM 3D-Printed PLA Components Through the Raster Layup. Compos. B Eng. 2020, 180, 107562. DOI: 10.1016/j.compositesb.2019.107562.
   Web of Science ®Google Scholar
• Yao, T.; Yea, J.; Deng, Z.; Zhang, K.; Ma, Y.; Ouyang, H. Tensile Failure Strength and Separation Angle of FDM 3D Printing PLA Material: Experimental and Theoretical Analyses. Compos. B Eng. 2020, 188, 107894. DOI: 10.1016/j.compositesb.2020.107894.
   Web of Science ®Google Scholar
• Zhao, Y.; Chen, Y.; Zhou, Y. Novel Mechanical Models of Tensile Strength and Elastic Property of FDM AM PLA Materials: Experimental and Theoretical Analyses. Mater. Des. 2019, 181, 108089. DOI: 10.1016/j.matdes.2019.108089.
   Web of Science ®Google Scholar
• Szust, A.; Adamski, G. Using Thermal Annealing and Salt Remelting to Increase Tensile Properties of 3D FDM Prints. Eng. Fail. Anal. 2022, 132, 105932. DOI: 10.1016/j.engfailanal.2021.105932.
   Web of Science ®Google Scholar
• Reis, I. A.; Claro, P. I. C.; Marcomini, A. L.; Mattoso, L. H. C.; Silva, S. P.; Neto, A. R. S. Annealing and Crystallization Kinetics of Poly(lactic Acid) Pieces Obtained by Additive Manufacturing. Polym. Eng. Sci. 2021, 61(7), 2097–2104. DOI: 10.1002/pen.25737.
   Web of Science ®Google Scholar
• Wach, R. A.; Wolszczak, P.; Adamus-Wlodarczyk, A. Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing. Macromol. Mater. Eng. 2018, 303(9), 1800169. DOI: 10.1002/mame.201800169.
   Web of Science ®Google Scholar
• Bhandari, S.; Lopez-Anido, R. A.; Gardner, D. J. Enhancing the Interlayer Tensile Strength of 3D Printed Short Carbon Fiber Reinforced PETG and PLA Composites via Annealing. Addit. Manuf. 2019, 30, 100922. DOI: 10.1016/j.addma.2019.100922.
   Web of Science ®Google Scholar