Improved approach to magnetorheological finishing of blind-hole cavities

References

• Bedi, T. S.; Kant, R. Comparative Performance of Magnetorheological External Finishing Tools Using Different Magnetic Structures. Mater. Today. 2021, 41(4), 908–914. DOI: 10.1016/j.matpr.2020.09.485.
   Google Scholar
• Hashmi, A. W.; Mali, H. S.; Meena, A. A Comprehensive Review on Surface Quality Improvement Methods for Additively Manufactured Parts. Rapid Prototyp. J. 2023, 29(3), 504–557. DOI: 10.1108/RPJ-06-2021-0133.
   Web of Science ®Google Scholar
• Bedi, T.; Singh, A. K. Magnetorheological Finishing of Ferromagnetic Blind-Hole Type Surfaces. Mater. Manuf. 2017, 33(11), 1169–1176. DOI: 10.1080/10426914.2017.1328120.
   Web of Science ®Google Scholar
• Kumar, M.; Das, M.; Yu, N. Surface Roughness Simulation During Rotational–Magnetorheological Finishing of Poppet Valve Profiles. Nanomanuf. Metrol. 2022, 5(3), 259–273. DOI: 10.1007/s41871-022-00144-8.
   Google Scholar
• Singh, G.; Jayant, A. A Novel Magnetorheological Finishing Process Based on Three Revolving Flat Tip Tools for External Cylindrical Surfaces. Int. J. Surf. Sci. Eng. 2023, 17(1), 1. DOI: 10.1504/IJSURFSE.2023.128876.
   Web of Science ®Google Scholar
• Pecora, R. A Practical Approach for the Mitigation of Seismic-Induced Vibrations in Slender Metallic Structures Through Magnetorheological Fluid Dampers. Appl. Sci. 2022, 12(9), 4155. DOI: 10.3390/app12094155.
   Google Scholar
• Bi, C.; Wang, H.; Liu, W.; Wu, K. A Comparative Analysis of Measured and Calculated Compressive Stresses of Magnetorheological Fluids Under Unidirectional Compression and Constant Area. Mater. 2022, 15(9), 3057. DOI: 10.3390/ma15093057.
   Google Scholar
• Iqbal, F.; Alam, Z.; Jha, S. Modelling of Transient Behavior of Roughness Reduction in Ball End Magnetorheological Finishing Process. Int. J. Abras. Technol. 2020, 10(3), 170–192. DOI: 10.1504/IJAT.2020.112690.
   Google Scholar
• Wang, R.; Sun, C.; Xiu, S.; Liang, D.; Li, B. Study of Machining Parameters in Reciprocating Magnetorheological Polishing Process Based on Response Surface Methodology. Ind. Lubr. Tribol. 2022, 74(9). DOI: 10.1108/ILT-04-2022-0141.
   Web of Science ®Google Scholar
• Shen, Z.; Pan, J.; Zhang, J.; Yan, Q. Preparation and Processing Performance of High Steady-State Magnetorheological Finishing Fluid. Smart Mater. Struct. 2023, 32(3), 035032. DOI: 10.1088/1361-665X/acb86e.
   Web of Science ®Google Scholar
• Qin, D.; Wu, J.; Li, J.; Ma, Y.; Ye, M.; Tian, D.; Wang, C.; Ji, F. Effect of Femtosecond Laser Modification on Magnetorheological Finishing of Magnesium Aluminate Spinel. Int. J. Adv. Manuf. Technol. 2023, 125(5–6), 2593–2600. DOI: 10.1007/s00170-023-10924-1.
   Web of Science ®Google Scholar
• Kumar, Y.; Singh, H. Chemomechanical Magnetorheological Finishing: Process Mechanism, Research Trends, Challenges and Opportunities in Surface Finishing. J. Micro. Manuf. 2021, 5(2), 193–206. DOI: 10.1177/25165984211038878.
   Google Scholar
• Choopani, Y.; Khajehzadeh, M.; Razfar, M. R. Experimental Investigations into the Nano-Finishing of Al2024 Tubes Using the Rotational-Magnetorheological Abrasive Flow Finishing (R-MRAFF) Process. Proc. Inst. Mech. Eng., Part E: J. Process Mech. Eng. 2022, 236(6), 2545–2557. DOI: 10.1177/09544089221094999.
   Web of Science ®Google Scholar
• Azami, A.; Azizi, A.; Khoshanjam, A. Nanofinishing of Stainless Steel Tubes Using Rotational Abrasive Finishing (RAF) Process. J. Manuf. Process. 2018, 34, 281–291. DOI: 10.1016/j.jmapro.2018.06.027.
   Web of Science ®Google Scholar
• Bedi, T. S.; Singh, A. K. An Initial New Approach for Magnetorheological Finishing of Ferromagnetic Internal Cylindrical Surfaces. Int. J. Adv. Manuf. Technol. 2019, 100(5–8), 1017–1030. DOI: 10.1007/s00170-018-2031-9.
   Web of Science ®Google Scholar
• Deng, J.; Lu, J.; Yan, Q.; Zhang, Q.; Pan, J. Preparation and Polishing Properties of Water-Based Magnetorheological Chemical Finishing Fluid with High Catalytic Activity for Single-Crystal SiC. J. Intell. Mater. Syst. Struct. 2020, 32(13), 1441–1451. DOI: 10.1177/1045389X20975503.
   Web of Science ®Google Scholar
• Xu, J.; Zou, Y. Development of a New Magnetic Abrasive Finishing Process with Renewable Abrasive Particles Using the Circulatory System. Precis. Eng. 2021, 72, 417–425. DOI: 10.1016/j.precisioneng.2021.06.004.
   Web of Science ®Google Scholar
• Aggarwal, A.; Singh, A. K. Development of Grinding Wheel Type Magnetorheological Finishing Process for Blind-Hole Surfaces. Mater. Manuf. 2021, 36(4), 457–478. DOI: 10.1080/10426914.2020.1843666.
   Web of Science ®Google Scholar
• Choopani, Y.; Razfar, M. R.; Khajehzadeh, M.; Khosrojerdi, M. Design and Development of Ultrasonic Assisted-Rotational Magnetorheological Abrasive Flow Finishing (UA-MRAFF) Process. Appl. Acoust. 2022, 197, 108950. DOI: 10.1016/j.apacoust.2022.108950.
   Web of Science ®Google Scholar
• Paswan, S. K.; Bedi, T. S.; Singh, A. K. Modeling and Simulation of Surface Roughness in Magnetorheological Fluid Based Honing Process. Wear. 2017, 376-377, 1207–1221. DOI: 10.1016/j.wear.2016.11.025.
   Web of Science ®Google Scholar