REFERENCES
- Felix, L.; Merritt, R.; Williamson, A. Evaluation of Styrene Emissions from a Shower Stall/Bathtub Manufacturing Facility; U.S. EPA Publication No. EPA/600/R-96/138 (NTIS PB97-125439), 1996.
- U.S. Environmental Protection Agency. Method 25A—Determination of Total Gaseous Organic Concentration Using a Flame Ionization Analyzer; Code of Federal Regulations, Vol. 40, Part 60, Appendix A, 1997.
- U.S. Environmental Protection Agency. Method 18—Measurement of Gaseous Organic Compound Emissions by Gas Chromatography; Code of Federal Regulations, Vol. 40, Part 60, Appendix A, 1997.
- Compilation of Air Pollutant Emission Factors: Stationary Point and Area Sources; U.S. Environmental Protection Agency Publication No. AP-42 (NTIS PB95-196028), 1995.
- Nunez, C.M.; Ramsey, G.H.; Kong, E.J.; Wright, R.S.; Clayton, C.A. “Evaluation of pollution prevention options to reduce styrene emissions from fiber-reinforced plastic open molding processes,” J Air & Waste Manage. Assoc. 1999, 49, 256–267.
- Nunez, C.M.; Bahner, M.A.; Wright, R.S.; Leese, K.; Ramsey, G.H. “Reducing styrene emissions from sprayed filled resins,” Pollution Prevention Review 1998, 8, 17–24.
- Bahner, M.A.; Nunez, C.M.; Ramsey, G.H.; Kong, E.J.; Wright, R.S.;Clayton, C.A.; Baskir, J.N. “Enclosures and Other Air-Flow Management Techniques to Reduce the Size and Cost of Controls for the Fiber-Reinforced Plastics Industry”; Presented at the Air & Waste Management Association Specialty Conference Emerging Solutions to VOC and Air Toxic Control, San Diego, CA, 1997; Paper ES97–51.
- Stelling Engineering, P.A.; Air-Tech Environmental LLC; Radian International LLC. Baseline Characterization of Emissions from Fiberglass Boat Manufacturing for National Marine Manufacturers Association; National Marine Manufacturers Association: Washington, DC, 1997.
- U.S. Environmental Protection Agency. Method 204—Criteria for and Verification of Permanent or Temporary Total Enclosure; Code of Federal Regulations, Vol. 40, Part 51, Appendix M, 1997.
- U.S. Environmental Protection Agency. Method 1—Sample and Velocity Traverses for Stationary Sources; Code of Federal Regulations, Vol. 40, Part 60, Appendix A, 1997.
- U.S. Environmental Protection Agency. Method 2—Determination of Stack Gas Velocity and Volumetric Flow Rate (Type S Pitot Tube); Code of Federal Regulations, Vol. 40, Part 60, Appendix A, 1997
- Nunez, C.M.; Ramsey, G.H; Bahner, M.A.; Clayton, C.A. “Empirical model to predict styrene emissions from fiber-reinforced plastics fabrication processes,” J Air & Waste Manage. Assoc., submitted for publication, 1999.