REFERENCES
- G.H. Haertling, Ferroelectric Ceramics: History and Technology. J. Am. Ceram. Soc. 82(4), 797–818 (1999).
- D.W. Wang, M.S. Cao, S.J. Zhang, Piezoelectric properties of PbHfO3–PbTiO3– Pb(Mg1/3Nb2/3)O3 ternary ceramics. Phys. Status. Solidi. RRL, 6, 135–137 (2012).
- J.W. Rodel, K.T. P. Seifert, E.M. Anton, T. Granzow, D. Damjanovic, Perspective on the Development of Lead-free Piezoceramics. J. Am. Ceram. Soc. 92, 1153–1177 (2009).
- T.R. Shrout, S.J. Zhang, Lead-free piezoelectric ceramics: Alternatives for PZT ?. J. Electroceramics. 19, 113–126 (2007).
- D.Q. Xiao, W. Zheng, Environmentally Conscious Piezo-and Ferroelectric Ceramics. J. Piezoelectrics and Acoustooptics. 21, 363–366 (1999).
- L. Dunmin, X.D. Quan, Researches and progresses of niobate-based lead-free piezoelectric ceramics. J. Funct. Mater. 34, 615–618 (2003).
- A. Chowdhury, J. Bould et al., Nano-powders of Na0.5K0.5NbO3 made by a sol–gel method. J. Nanopart. Res. 12, 209–215 (2010).
- Y. Sun, D.Q. Xiao, L. Wu, M. Chen et al., Progresses of the preparation techniques of KNbO3 NaNbO3 based piezoelectric ceramics. J. Funct. Mater. 8, 225–1227 (2007).
- Y.L. Deng, Y.W. Liao, H.P. Wang, 0.94(K0.5Na0.5)NbO3-0.06 LiNbO3 Lead-Free Fine Powders Prepared by Sol-gel Process. J. China. West. Norm. University (Natural Sciences). 29, 356–358 (2008).
- G.J. DerderianJ.D. Barrie, K.A. Aitchison et al., Microstructure/Process Relations in Sol-Gel Prepared KNbO3 Thin Films on (100) MgO. J. Am. Ceram. Soc. 77, 820–828 (1994).
- E.R. Camargo, M. Popa, M. Kakihana, Sodium niobate (NaNbO3) powders synthesized by a wet-chemical method using a water-soluble malicacid complex. Chem. Mater. 14, 2365–2368 (2002).
- S.C. Navale, V. Samuel, V. Ravi, Investigations on Ru doped ZnO: Strain calculations and gas sensing study. Bull. Mater. Sci. 28, 391–393 (2005).
- D.Q. Zhang, Z.C. Qin, H.B. Zhu et al., Study on synthesis and evolution of sodium potassium niobate ceramic powders by an oxalic acid-based sol–gel method. J. Sol-Gel. Sci. Technol. 57, 31–35 (2011)
- H.Q. Wang, R.Z. Zuo, L. Wang et al., Preparation and piezoelectric properties of CuO-doped (Na0.5K0.5)NbO3 ceramics by the citrate precursor method. J. Mater. Sci. Mater Electron. 22, 458–462 (2011).
- X. Yan, W. Ren, Preparation of Na0.5K0.5NbO3 lead-free piezoelectric thin films with metal-organic salt thermo decomposition method, J. Electronic Components and Materials. 10, 25–31 (2010).
- P.X. Liu, K.J. Zhu, X.L. Hu et al., Preparation of K0.5Na0.5NbO3 Thin Film by the Hydrothermal-assisted Polymeric Precursor Method. J. Piezoelectrics and Acoustooptics. 5, 837–840 (2010).
- B.Q. Ming, J.F. Wang, G.Z. Zang et al., X-ray diffraction and phase transition analysis for (K, Na)NbO3-based lead-free piezoelectric ceramics. J. Acta. Physica. Sinica, 57, 5962–5967 (2008).
- Y.P. Guo, K. Kakimoto et al., Phase transitional behavior and piezoelectric properties of (Na0.5K0.5)NbO3–LiNbO3 ceramics. Appl. Phys. Lett. 85, 4121–4123 (2004).
- Y.P. Guo, K. Kakimoto, H. Ohsato, (Na0.5K0.5)NbO3–LiTaO3 lead-free piezoelectric ceramics. Mater. Lett. 59, 241–244 (2005).
- P Zhao, B.P. Zhang, J.F. Li, Enhancing piezoelectric d33 coefficient in Li/Ta-codoped lead-free (Na, K)NbO3 ceramics by compensating Na and K at a fixed ratio. Appl. Phys. Lett. 91, 172901-1-3 (2007).
- C.R. Cho, A. Grishin, Background oxygen effects on pulsed laser deposited films: From super paraelectric state to ferroelectricity. J. Appl. Phys. 87, 4439–4448 (2000).
- L.Y. Wang, K. Yao, W. Ren, Piezoelectric Na0.5K0.5NbO3 thick films derived from polyvinylpyrrolidone-modified chemical solution deposition. Appl. Phys. Lett. 93, 0929031–0929033 (2008).
- K. Tanaka, K.I. Kakimoto, H. Ohsato, Fabrication of highly oriented lead-free (Na, K)NbO3 thin films at low temperature by Sol-Gel process. J. Crystal. Growth. 294, 209–213 (2006).
- H.B. Yang, Y. Lin, F. Wang, Low-temperature Synthesis of NaNbO3 Ultrafine Powder and Morphology Control. J. Wuhan University of Technology. 29, 58–61 (2007).