The Coffin-Manson formula for unleaded Sn/3.0Ag/0.5Cu solder

References

• R.T. Rao, J. R. Eugene, C. K. Alan, Microelectronics Packaging Handbook, Chapman & Hall, New York, USA., (1996)
   Google Scholar
• Chandra S. Desai, Russell Whitenack, (2001), “Review of Models and the Disturbed State Concept for Thermomechanical Analysis in Electronic Packaging,” ASME Journal of Electronic Packaging, 123, pp.19–33.
   Web of Science ®Google Scholar
• H. D. Solomon, (1986), “Fatigue of 60/40 Solder,” IEEE Trans. Components, Hybrids, Manufact. Technol., 9, pp. 423–432.
   Web of Science ®Google Scholar
• D. Frear, H. Morgan, S. Burchett, J. Lau, (1994), The Mechanics of Solder Alloy Interconnects, Van Nostrand Reinhold, New York, USA, pp.199–313.
   Google Scholar
• W. Engelmaier, (1983), “Fatigue Life of Leadless Chip Carrier Solder Joints During Power Cycling,” IEEE Trans. Components, Hybrids, Manufact. Technol., 6, pp. 52–57.
   Google Scholar
• Q. Guo, E. C. Cutiongco, L. M. Keer, M. E. Fine, (1992), “Thermomechanical Fatigue Life Prediction of 63Sn/37Pb Solder,” Journal of Electronic Packaging, 114, pp.145–151.
   Google Scholar
• J. H. Lau, D. Y. R. Chong, (2001), “Flip Chip on Board Solder Joint Reliability Analysis Using 2-D and 3-D FEA Models,” IEEE Transactions on Advanced Packaging, 24, No. 4, pp. 499–506.
   Google Scholar
• A. Schubert, R. Dudek, E. Auerswald, A. Gollhardt, B. Michel, H. Reichl, (2003), “Fatigue Life Models for Sn/Ag/Cu and Sn/Pb Solder Joints Evaluated by Experiments and Simulation,” 2003 IEEE Electronic Components and Technology Conference, pp.603–610.
   Google Scholar
• T. S. Park, S. B. Lee, (2002), “Isothermal Low Cycle Fatigue Tests of Sn/3.5Ag/0.75Cu and 63Sn/37Pb Solder Joints under Mixed-Mode Loading Cases,” 2002 IEEE Electronic Component and Technology Conference, pp. 979–984.
   Google Scholar
• JEDEC Solid State Technology Association, (2000), “Test Method for BGA Ball Shear,” JESD22-B117, JEDEC Solid State Technology Association, Arlington, VA.
   Google Scholar
• R. J. Coyle, P. P. Solan, (2000), “The Influence of Test Parameters and Package Design Features on Ball Shear Test Requirements,” Proceedings of the 26th IEEE International Electronics Manufacturing Symposium, Santa Clara, CA, pp.168–177.
   Google Scholar
• R. J. Coyle, A. J. Serafino, (2002), “Ball Shear versus Ball Pull Test Methods for Evaluating Interfacial Failures in Area Array Packages,”Proceedings of the 27th IEEE International Electronics Manufacturing Symposium, pp.200–205.
   Google Scholar
• Xingjia Huang, S. W. Ricky Lee, Chien Chun Yan, Sam Hui, (2001), “Characterization and Analysis on the Solder Ball Shear Testing Conditions,” 2001 IEEE Electronic Components and Technology Conference, 51, pp.1065–1071.
   Google Scholar
• Xingjia Huang, S. W. Ricky Lee, Chien Chun Yan, (2002), “Experimental Investigation on the Progressive Failure Mechanism of Solder Balls During Ball Shear Test,” Proceedings 52st Electronic Components &Technology Conference (ECTC), pp.968–973.
   Google Scholar
• H. D. Solomon, (1989), Strain-Life Behavior in 60/40Solder, ASME Journal of Electronic Packaging, 111, P75–82.,
   Google Scholar
• W. W. Lee, L. T. Nguyen, G. S. Selvaduray, (2000), “Solder Joint Fatigue Models: Review and Applicability to Chip Scale Package,” Microelectronics Reliability, 40, pp. 231–244.
   Web of Science ®Google Scholar
• J. H. Lau, Y. H. Pao, (1997), Solder Joint Reliability of BGA, CSP, Flip Chip, and Fine Pitch SMT Assemblies, McGraw-Hill, New York, USA.
   Google Scholar
• K. Brakke, (2003), Surface Evolver Manual, Version 2.20, The Geometry Center, University of Minnesota.
   Google Scholar
• A. Schubert, R. Dudek, H. Walter, E. Jung, A. Gollhardt, B. Michel, H. Reichl, (2002), “Reliability Assessment of Flip-Chip Assemblies with Lead-free Solder Joints,” 2002 IEEE Electronic Component and Technology Conference, pp. 1246–1255.
   Google Scholar
• Q. Tan, Y. C. Lee, (1996), “Soldering Technology for Optoelectronic Packaging,” 1996 IEEE Electronic Component and Technology Conference, pp. 26–36.
   Google Scholar
• G. N. Ellison, (1989), Thermal Computations for Electronic Equipment, R.E.Krieger Publishing Co.Malabar, FL.pp.31–48.
   Google Scholar
• H. D. Solomon, (1996), “Energy Approach to the Fatigue of 60/40 Solder：Part II - Influence of Hold Time and Asymmetric Loading”, Journal of Electronic Packaging, 118, pp.67–71.
   Web of Science ®Google Scholar
• D. C. Montgomery, G. C. Runger, N. F. Hubele, (2002), Engineering Statistics, WILEY, New York, USA, pp.261–274.
   Google Scholar