References
- S. Savov, P. Nedyalkov, and I. Minin, Crushing force theoretical examination in one cone inertial crusher, J. Multidiscipl. Eng. Sci. Technol. (JMEST. 2 (3), 430 (2015).
- S. Savov, P. Nedyalkov, and I. Minin, Layer crushing in one inertial crusher, J. Multidiscipl. Eng. Sci. Technol. (JMEST). 2 (9), 2619 (2015).
- B. P. Numbi, X. Xia, and J. Zhang, Optimal energy control modeling of a vertical shaft impact crushing process, Energy Procedia. 61, 560 (2014). DOI: 10.1016/j.egypro.2014.11.1170.
- J. S. Salazar et al., Mathmatical modeling of a vertical shaft impact crusher using the Whiten model, Miner. Eng. 111, 222 (2017). DOI: 10.1016/j.mineng.2017.06.022.
- N. Sokur et al., Investigation of the process of crushing solid materials in the centrifugal disintegrators, Eejet.3 (781), 34 (2016). DOI: 10.15587/1729-4061.2016.71983.
- W. Qian, and Q. Lingshan, Impact velocity analysis of centrifugal impact crusher. Cement. 1, 12 (1992). in Chinese)
- I. V. Shadrunova et al., Metallurgical slag disintegration in centrifugal impact crushing machines, J. Min. Sci. . 51 (2), 363 (2015). DOI: 10.1134/S1062739115020210.
- I. V. Shadrunova et al., Resource-saving technologies and technical means for processing raw materials difficult for concentration, Metallurg. Mining Indust. 12, 45 (2016).
- P. E. Vaitekhovich, P. S. Grebenchuk, and A. V. Tabolich, The model of material movement in the rotor accelerator of the centrifugal impact crusher, Proceedings of BSTV. 3, 91 (2014).
- E. Stamboliadis, and D. Stamboliadis, Energy, cost and optimization of a closed circuit crushing plant with a centrifugal crusher, Europ. Sci. J. 3, 160 (2013).
- Y. Jingan et al., Numerical simulation of central shrinkage crack formation in a 234-t steel ingot, China Foundry. 14 (5), 365 (2017). DOI: 10.1007/s41230-017-7160-5.
- S. L. Goerrero, and L. E. Vallejo, Analysis of crushing of granular material under isotropic and biaxial stress conditions, Solid and Foundation. 45, 79 (2005). DOI: 10.3208/sandf.45.4_79.
- B. Wu et al., Numerical simulation of microstructure evolution on near eutectic spheroidal graphite cast iron, China Foundry. 14 (5), 386 (2017). DOI: 10.1007/s41230-017-7153-4.
- H. Nan et al., Development and application of low alloy steel wear block materials, Thermal Process. 42 (24), 131 (2013). +136. (in Chinese)
- J. Wang, X. Sun, Y. Guan, Numerical simulation and process optimization for producing large-sized castings, China Foundry. 3, 179 (2008).
- L. Ri et al., Study on boundary search method for DFM mesh generation, China Foundry. 9 (3), 231 (2012).