References
- S. A. Sherrill et al., High to ultra-high power electrical energy storage, Phys. Chem. Chem. Phys. 13 (46), 20714 (2011). DOI: https://doi.org/10.1039/c1cp22659b.
- H. Palneedi et al., High‐performance dielectric ceramic films for energy storage capacitors: Progress and outlook, Adv. Funct. Mater. 28 (42), 1803665 (2018). DOI: https://doi.org/10.1002/adfm.201803665.
- V. K. Thakur, and R. K. Gupta, Recent progress on ferroelectric polymer-based nanocomposites for high energy density capacitors: Synthesis, dielectric properties, and future aspects, Chem. Rev. 116, 4260 (2016). DOI: https://doi.org/10.1021/acs.chemrev.5b00495.
- Z. Yao et al., Homogeneous/inhomogeneous‐structured dielectrics and their energy‐storage performances, Adv. Mater. 29 (20), 1601727 (2017). DOI: https://doi.org/10.1002/adma.201601727.
- N. H. Fletcher, A. Hilton, and B. Ricketts, Optimization of energy storage density in ceramic capacitors, J. Phys. D: Appl. Phys. 29 (1), 253 (1996). DOI: https://doi.org/10.1088/0022-3727/29/1/037.
- A. Chauhan et al., Anti-ferroelectric ceramics for high energy density capacitors, Materials (Basel) 8 (12), 8009 (2015). DOI: https://doi.org/10.3390/ma8125439.
- X. Hao et al., A comprehensive review on the progress of lead zirconate-based antiferroelectric materials, Prog. Mater. Sci. 63, 1 (2014). DOI: https://doi.org/10.1016/j.pmatsci.2014.01.002.
- Y. Li et al., Multiple electrical response and enhanced energy storage induced by unusual coexistent-phase structure in relaxor ferroelectric ceramics, Acta Mater. 146, 202 (2018). DOI: https://doi.org/10.1016/j.actamat.2017.12.048.
- Q. Zhang et al., Effects of composition and temperature on energy storage properties of (Pb, La)(Zr, Sn, Ti)O3 antiferroelectric ceramics, Ceram. Int. 43 (14), 11428 (2017). DOI: https://doi.org/10.1016/j.ceramint.2017.06.005.
- B. Peng et al., Improvement of the recoverable energy storage density and efficiency by utilizing the linear dielectric response in ferroelectric capacitors, Appl. Phys. Lett. 105 (5), 052904 (2014). DOI: https://doi.org/10.1063/1.4892454.
- R. Directive, Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, Official Journal of the European Union 13, L37 (2003).
- T. Takenaka, K. Maruyama, and K. Sakata, (Bi1/2Na1/2)TiO3-BaTiO3 system for lead-free piezoelectric ceramics, Jpn. J. Appl. Phys. 30 (Part 1, No. 9B), 2236 (1991). DOI: https://doi.org/10.1143/JJAP.30.2236.
- S.-T. Zhang et al., Giant strain in lead-free piezoceramics Bi0.5Na0.5TiO3–BaTiO3–K0.5Na0.5NbO3 system, Appl. Phys. Lett. 91 (11), 112906 (2007). DOI: https://doi.org/10.1063/1.2783200.
- B. Wang et al., Energy-storage properties of (1− x)Bi0.47Na0.47Ba0.06TiO3–xKNbO3 lead-free ceramics, J. Alloys Compd. 585, 14 (2014). DOI: https://doi.org/10.1016/j.jallcom.2013.09.052.
- J. Chen et al., Giant electric field-induced strain at room temperature in LiNbO3-doped 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3, J. Eur. Ceram. Soc. 37 (6), 2365 (2017). DOI: https://doi.org/10.1016/j.jeurceramsoc.2017.02.009.
- F. Li et al., Huge strain and energy storage density of A-site La3+ donor doped (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramics, Ceram. Int. 43 (1), 106 (2017). DOI: https://doi.org/10.1016/j.ceramint.2016.09.117.
- Q. Li et al., Giant field-induced strain in Nb2O5-modified (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics, Ceram. Int. 43 (7), 5367 (2017). DOI: https://doi.org/10.1016/j.ceramint.2017.01.084.
- R. A. Malik et al., Thermal-stability of electric field-induced strain and energy storage density in Nb-doped BNKT-ST piezoceramics, J. Eur. Ceram. Soc. 38 (6), 2511 (2018). DOI: https://doi.org/10.1016/j.jeurceramsoc.2018.01.010.
- Y. Pu et al., High energy storage density of 0.55Bi0.5Na0.5TiO3-0.45Ba0.85, Ca0.15Ti0.9−xZr0.1SnxO3 ceramics, J. Alloys Compd. 687, 689 (2016). DOI: https://doi.org/10.1016/j.jallcom.2016.06.181.
- B. Yan et al., Giant electro-strain and enhanced energy storage performance of (Y0.5Ta0.5)4+ co-doped 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 lead-free ceramics, Ceram. Int. 46 (1), 281 (2020). DOI: https://doi.org/10.1016/j.ceramint.2019.08.261.
- B. Sahoo, and P. K. Panda, Effect of CeO2 on dielectric, ferroelectric and piezoelectric properties of PMN–PT (67/33) compositions, J. Mater. Sci. 42 (13), 4745 (2007). DOI: https://doi.org/10.1007/s10853-006-0828-7.
- D. Jin, P. Hing, and C. Q. Sun, Growth dynamics and electric properties of PbTi0.1Zr0.9O3 ceramics doped with cerium oxide, J. Phys. D: Appl. Phys. 33 (6), 744 (2000). DOI: https://doi.org/10.1088/0022-3727/33/6/324.
- D. Gao et al., Microstructure, electrical properties of CeO2-doped (K0.5Na0.5)NbO3 lead-free piezoelectric ceramics, J. Mater. Sci. 44 (10), 2466 (2009). DOI: https://doi.org/10.1007/s10853-009-3314-1.
- S. Pattipaka, M. Peddigari, and P. Dobbidi, Effect of Ce on structural and dielectric properties of lead-free (Bi0.5Na0.5)TiO3 ceramics, Ceram. Int. 43, S151 (2017). DOI: https://doi.org/10.1016/j.ceramint.2017.05.185.
- W. Zheng et al., Enhanced ferroelectric and piezoelectric performance of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 lead-free ceramics upon Ce and Sb co-doping, RSC Adv. 11 (5), 2616 (2021). DOI: https://doi.org/10.1039/D0RA09441B.
- M. Otoničar et al., Structural diversity of the (Na1− xKx)0.5Bi0. 5TiO3 perovskite at the morphotropic phase boundary, J. Appl. Phys. 113 (2), 024106 (2013). DOI: https://doi.org/10.1063/1.4773831.
- M. Hammer et al., Correlation between surface texture and chemical composition in undoped, hard, and soft piezoelectric PZT ceramics, J. Am. Ceram. Soc. 81 (3), 721 (2005). DOI: https://doi.org/10.1111/j.1151-2916.1998.tb02397.x.
- X. Liu et al., Tuning the ferroelectric-relaxor transition temperature in NBT-based lead-free ceramics by Bi nonstoichiometry, J. Eur. Ceram. Soc. 37 (15), 4585 (2017). DOI: https://doi.org/10.1016/j.jeurceramsoc.2017.05.042.
- R. Ranjan, and A. Dviwedi, Structure and dielectric properties of (Na0.50Bi0.50)1−xBaxTiO3: 0≤ x≤ 0.10, Solid State Commun. 135 (6), 394 (2005). DOI: https://doi.org/10.1016/j.ssc.2005.03.053.
- W. Jo et al., On the phase identity and its thermal evolution of lead free (Bi1/2Na1/2)TiO3-6 mol% BaTiO3, J. Appl. Phys. 110 (7), 074106 (2011). DOI: https://doi.org/10.1063/1.3645054.
- S. Prasertpalichat et al., Structural characterization of A-site nonstoichiometric (1− x)Bi0.5Na0.5TiO3–xBaTiO3 ceramics, J. Mater. Sci. 54 (2), 1162 (2019). DOI: https://doi.org/10.1007/s10853-018-2939-3.
- D.-Y. Lu et al., Raman evidence for Ba-site Ce3+ in BaTiO3, Jpn. J. Appl. Phys. 52 (11R), 111501 (2013). DOI: https://doi.org/10.7567/JJAP.52.111501.
- R. D. Shannon, Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides, Acta Cryst. A 32 (5), 751 (1976). DOI: https://doi.org/10.1107/S0567739476001551.
- D. J. Kim, M. H. Lee, and T. K. Song, Comparison of multi-valent manganese oxides (Mn4+, Mn3+, and Mn2+) doping in BiFeO3-BaTiO3 piezoelectric ceramics, J. Eur. Ceram. Soc. 39 (15), 4697 (2019). DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.07.013.
- R. A. Malik et al., Giant strain, thermally-stable high energy storage properties and structural evolution of Bi-based lead-free piezoceramics, J. Alloys Compd. 682, 302 (2016). DOI: https://doi.org/10.1016/j.jallcom.2016.04.297.
- J. Kling et al., Temperature‐Dependent Phase Transitions in the Lead‐Free Piezoceramics (1–x–y)(Bi1/2Na1/2)TiO3–xBaTiO3–y(K0.5Na0.5)NbO3 Observed by in situ Transmission Electron Microscopy and Dielectric Measurements, J. Am. Ceram. Soc. 96 (10), 3312 (2013). DOI: https://doi.org/10.1111/jace.12493.
- Q. Xu et al., Enhanced energy storage properties of NaNbO3 modified Bi0.5Na0.5TiO3 based ceramics, J. Eur. Ceram. Soc. 35 (2), 545 (2015). DOI: https://doi.org/10.1016/j.jeurceramsoc.2014.09.003.
- C. Ma et al., Domain structure-dielectric property relationship in lead-free (1− x)(Bi1/2Na1/2)TiO3-xBaTiO3 ceramics, J. Appl. Phys. 108 (10), 104105 (2010). DOI: https://doi.org/10.1063/1.3514093.
- Q. Xu et al., Ultra-Wide Temperature Stable Dielectrics Based on Bi0.5Na0.5TiO3–NaNbO3 System, J. Am. Ceram. Soc. 98 (10), 3119 (2015). DOI: https://doi.org/10.1111/jace.13693.
- D. Yin et al., Electrical properties and relaxor phase evolution of Li‐modified BNT‐BKT‐BT lead‐free ceramics, J. Am. Ceram. Soc. 99 (7), 2354 (2016). DOI: https://doi.org/10.1111/jace.14247.
- L. Li et al., 0.46% unipolar strain in lead-free BNT-BT system modified with Al and Sb, Mater. Lett. 184, 152 (2016). DOI: https://doi.org/10.1016/j.matlet.2016.07.150.
- Q. Xu et al., Structure and electrical properties of lead-free Bi0.5Na0.5TiO3-based ceramics for energy-storage applications, RSC Adv. 6 (64), 59280 (2016). DOI: https://doi.org/10.1039/C6RA11744A.
- X.-Y. Tong et al., Enhanced energy storage properties in Nb-modified Bi0.5Na0.5TiO3–SrTiO3 lead-free electroceramics, J. Mater. Sci.: Mater. Electron. 30 (6), 5780 (2019). DOI: https://doi.org/10.1007/s10854-019-00876-2.
- X. Zhang et al., Phase transition of ergodic space shrinking in succession and relaxor ferroelectrics, Phys. Lett. A 251 (3), 219 (1999). DOI: https://doi.org/10.1016/S0375-9601(98)00895-0.
- V. Westphal, W. Kleemann, and M. Glinchuk, Diffuse phase transitions and random-field-induced domain states of the ‘“ "relaxor" ferroelectric PbMg1/3Nb2/3O3” , Phys. Rev. Lett. 68 (6), 847 (1992). DOI: https://doi.org/10.1103/PhysRevLett.68.847.
- T. M. Correia et al., A lead‐free and high‐energy density ceramic for energy storage applications, J. Am. Ceram. Soc. 96 (9), 2699 (2013). DOI: https://doi.org/10.1111/jace.12508.
- A. Chauhan, S. Patel, and R. Vaish, Mechanical confinement for improved energy storage density in BNT-BT-KNN lead-free ceramic capacitors, AIP Adv. 4 (8), 087106 (2014). DOI: https://doi.org/10.1063/1.4892608.
- S. Patel, A. Chauhan, and R. Vaish, Enhancing electrical energy storage density in anti-ferroelectric ceramics using ferroelastic domain switching, Mater. Res. Express 1 (4), 045502 (2014). DOI: https://doi.org/10.1088/2053-1591/1/4/045502.