References
- Y. Fu et al., Composition and development of wire cutting fluid for hard and brittle materials, Semicond. Technol. (4), 292 (2008).
- A. V. Belyakov and S. I. Tserman, Cutting of Bakor by a segmented tool with clustered diamonds, Refract. Ind. Ceram. 52 (3), 195 (2011). DOI: https://doi.org/10.1007/s11148-011-9395-9.
- A. V. Belyakov and S. I. Tserman, Cutting brittle inorganic nonmetallic materials with a diamond tool from the position of synergetics, Refract. Ind. Ceram. 55 (2), 97 (2014). DOI: https://doi.org/10.1007/s11148-014-9668-1.
- P. Ja et al., Contrast between magnetism of diamond and cutting speed of diamond saw, Diamond Abras. Eng. (6), 68 (2008).
- M. Zhao, L. Zhang, and B. Wu, Study on the dynamic characteristics of the large diamond circular saw blade, AMR 945–949, 781 (2014). DOI: https://doi.org/10.4028/www.scientific.net/AMR.945-949.781.
- I. Karakurt, G. Aydin, and K. Aydiner, Predictive modelling of noise level generated during sawing of rocks by circular diamond sawblades, Sadhana 38 (3), 491 (2013). DOI: https://doi.org/10.1007/s12046-013-0117-5.
- H. Nakagawa et al., High-speed and high-accuracy slabbing of marble using diamond wire saw, J. Jpn. Soc. Abras. Technol. 48, 329 (2004).
- S. Li et al., Dynamic stability of cemented carbide circular saw blades for woodcutting, J. Mater. Process. Technol. 238, 108 (2016). DOI: https://doi.org/10.1016/j.jmatprotec.2016.07.018.
- Z. Yuan et al., Frequency reliability analysis of diamond circular saw blade, AMM 380–384, 128 (2013). DOI: https://doi.org/10.4028/www.scientific.net/AMM.380-384.128.
- Y. Li, Influence of radial slots on the vibration characteristics of circular saw blade, AMM 226–228, 232 (2012). DOI: https://doi.org/10.4028/www.scientific.net/AMM.226-228.232.
- Y. Li, and X. P. Xu, Modal analysis of circular diamond saw-blade for deep sawing of granite, KEM. 315-316 (315-316), 348 (2006). DOI: https://doi.org/10.4028/www.scientific.net/KEM.315-316.348.
- J. Cheng, Experimental study on mechanism of surface formation for micro-grinding of hard brittle material, JME. 48 (21), 190 (2012). DOI: https://doi.org/10.3901/JME.2012.21.190.
- M. Magno et al., Low-power wireless accelerometer-based system for wear detection of bandsaw blades, Industrial Informatics (INDIN), 2013 11th IEEE International Conference on., IEEE, 2013.
- S. Roberts, Control the top 3 areas of band saw frustrations reduce machine downtime, blade failure, and operator error, Canadian Metalworking (2017).
- Y. Tao, An overview of the problems faced by the application of CMOS integrated circuits, Mod. Inform. Technol. 2 (02) (2018).
- W. Y. Peng, and Y. S. Liao, Study of electrical discharge machining technology for slicing silicon ingots, J. Mater. Process. Tech. 140 (1-3), 274 (2003). DOI: https://doi.org/10.1016/S0924-0136(03)00718-0.
- H. J. Pan et al., Study on the high efficiency mechanism in WEDM of semiconductor in micro contact condition, J. Synth. Cryst. 42 (07), 1336 (2013).
- Y. S. Liao, T. J. Chuang, and Y. P. Yu, Study of machining parameters optimization for different materials in WEDM, Int. J. Adv. Manuf. Technol. 70 (9-12), 2051 (2014). DOI: https://doi.org/10.1007/s00170-013-5458-z.
- A. Conde et al., An industrial system for estimation of workpiece height in WEDM, Procedia Eng. 132, 647 (2015). DOI: https://doi.org/10.1016/j.proeng.2015.12.543.
- A. A. Bajwa, S. Habib, and M. Kamran, An investigation into partial discharge pulse extraction methods, Int. J. Electr. Power Energy Syst. 73 (dec), 964 (2015). DOI: https://doi.org/10.1016/j.ijepes.2015.06.028.
- K. Mouralova et al., Optimization machining of titanium alloy Ti-6Al-4V by WEDM with emphasis on the quality of the machined surface, Manuf. Technol. 16 (6), 1326 (2016). DOI: https://doi.org/10.21062/ujep/x.2016/a/1213-2489/MT/16/6/1326.
- S. D. Kumar et al., Optimization of EDM process parameters of thixoformed A356-5TiB2 in situ composites, MSF 978, 271 (2020). DOI: https://doi.org/10.4028/www.scientific.net/MSF.978.271.
- S. S. Mahapatra, and A. Patnaik, Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method, Int. J. Adv. Manuf. Technol. 34 (9-10), 911 (2007). DOI: https://doi.org/10.1007/s00170-006-0672-6.
- Y. Wang et al., Study on the mechanism and key technique of ultrasonic vibration and magnetic field complex assisted WEDM-LS thick shape memory alloy workpiece, J. Mater. Process. Technol. 261, 251 (2018). DOI: https://doi.org/10.1016/j.jmatprotec.2018.06.006.
- T. Otani et al., 401 Fundamental study on multi-wire EDM slicing with group power supplying method, The Proceedings of Conference of Chugoku-Shikoku Branch, Vol. 53, 401-1, 2015.
- W. Yuan et al., Wire servo discharge grooving technology based on WEDM for beam tunnel fabrication, Int. J. Adv. Manuf. Technol. 115 (11-12), 3907 (2021). DOI: https://doi.org/10.1007/s00170-021-07232-x.
- Z. J. Hou, P. Q. G. Y. F. Gao, and B. Sang, The development of a wire saw for slicing of brittle materials which are insulator of electricity, Modul. Mach. Tool Autom. Manuf. Tech. 03, 75 (2006).
- C. Chung, G. D. Tsay, and M. H. Tsai, Distribution of diamond grains in fixed abrasive wire sawing process, Int. J. Adv. Manuf. Technol. 73 (9-12), 1485 (2014). DOI: https://doi.org/10.1007/s00170-014-5782-y.
- R. Liu et al., Study on a novel fixed and free abrasive combined wire sawing multi-crystalline silicon wafers for wet acid texturization, Sol. Energy 220, 713 (2021). DOI: https://doi.org/10.1016/j.solener.2021.03.080.
- F. Yang, and I. Kao, Free abrasive machining in slicing brittle materials with wiresaw, J. Electr. Packag. 123 (3), 254 (2001). DOI: https://doi.org/10.1115/1.1348019.
- P. Q. Ge, B. Sang, and Y. F. Gao, The numerical analysis on action mechanism of slurry in free abrasive wiresaw slicing, KEM. 359-360 (359-360), 455 (2007). DOI: https://doi.org/10.4028/www.scientific.net/KEM.359-360.455.
- L. Zhao, D. Zuo, and Y. Sun, Progress of research in slicing technology of large-scale silicon wafers, Key Eng. Mater. (375-376), 1 (2008).
- J. S. Wang, C. Wang, and Z. F. Li, Research progress of sawing mechanism for free abrasive wire saw, Appl. Mech. Mater. (446-447), 414 (2014).
- S. Bhagavat, and I. Kao, Ultra-low load multiple indentation response of materials: In purview of wiresaw slicing and other free abrasive machining (FAM) processes, Int. J. Mach. Tools Manuf. 47 (3-4), 666 (2007). DOI: https://doi.org/10.1016/j.ijmachtools.2006.04.015.
- W. D. Yue, and Z. D. Liu, Situation and development of fixed diamond abrasive wire cutting technology, Diamond Abras. Eng. 34 (6), 69 (2014).
- L. Li, and I. Kao, Modeling and experimental study of the impact on free abrasive machining (FAM) due to vibration of a thin wire subject to an oscillating boundary condition, ASME 2019 14th International Manufacturing Science and Engineering Conference, 2019.
- Y. L. Shi et al., Preparation of electroplated Ni-P-ultrafine diamond, Ni-P-carbon nanotubes composite coatings and their corrosion properties, J. Mater. Sci. 39 (18), 5809 (2004). DOI: https://doi.org/10.1023/B:JMSC.0000040093.31790.d3.
- W. Hao, Wire sawing technology: A state-of-the-art review, Precis. Eng. 43, 1 (2016).
- S. Feng et al., Surface quality evaluation of single crystal 4H-SiC wafer machined by hybrid laser-waterjet: Comparing with laser machining, Mater. Sci. Semicond. Process. 93, 238 (2019). DOI: https://doi.org/10.1016/j.mssp.2018.12.037.
- X. Li et al., Research on efficient cutting and low wire wear technology of HSWEDM, China Mech. Eng. 25 (1), 71 (2014).
- A. Mb, B. Rt, and B. Ky, Comprehensive study on effect of orthogonal turn-milling parameters on surface integrity of Inconel 718 considering production rate as constrain, Int. J. Lightweight Mater. Manuf. 4 (2), 145 (2020).
- Y. Jin, and J. Cheng, Experimental investigation on surface generation mechanism of micro-grinding of hard brittle crystal materials, Int. J. Adv. Manuf. Technol. (2017).
- P. Wang et al., Prediction of sawing force for single-crystal silicon carbide with fixed abrasive diamond wire saw, Mater. Sci. Semicond. Process. 63, 25 (2017). DOI: https://doi.org/10.1016/j.mssp.2017.01.014.
- S. J. Li et al., Analytical force modeling of fixed abrasive diamond wire saw machining with application to SiC monocrystal wafer processing, J. Manuf. Sci. Eng. Trans. ASME 139 (4), 041003 (2017).
- W. I. Clark et al., Fixed abrasive diamond wire machining-part I: Process monitoring and wire tension force, Int. J. Mach. Tools Manuf. 43 (5), 523 (2003). DOI: https://doi.org/10.1016/S0890-6955(02)00215-8.
- W. I. Clark et al., Fixed abrasive diamond wire machining—part II: Experiment design and results, Int. J. Mach. Tools Manuf. 43 (5), 533 (2003). DOI: https://doi.org/10.1016/S0890-6955(02)00216-X.
- B. An et al., Adaptive control of cutting force based on wire saw speed in the cutting process of hard and brittle materials, J. Ord. Ind. 40 (02), 191 (2019).
- S. J. Li et al., Modeling and adaptive control of cutting force of SiC single crystal wafer, Mech. Sci. Technol. 34 (03), 423 (2015).
- B. Yu Pan, Development and application of intelligent adaptive sampling control system and nanosecond high frequency power supply for reciprocating WEDM machine tool, Electr. Mach. Mould. (06), 25 (2020).
- R. Knoblauch et al., Investigation of the progressive wear of individual diamond grains in wire used to cut monocrystalline silicon. Wear, 414–415, 50 (2018).
- L. Y. Huang et al., Nano-scratch and fretting wear study of DLC coatings for biomedical application, Diamond Relat. Mater. 10 (8), 1448 (2001). DOI: https://doi.org/10.1016/S0925-9635(00)00501-X.
- D. Pellegrin et al., Diamond particle shape: Its measurement and influence in abrasive wear, Tribol. Int. 42 (1), 160 (2009). DOI: https://doi.org/10.1016/j.triboint.2008.04.007.
- B. Huang, Y. F. Gao, and P. Q. Ge, Analysis of surface defects and wire wear of monocrystalline silicon cut by diamond wire saw, Diamond Abras. Eng. 31 (01), 53 (2011).
- R. Mikaeil et al., Development of intelligent systems to predict diamond wire saw performance, J. Soft Comput. Civ. Eng. (1-2), 52 (2017).
- S. C. Jain, and S. S. Rathore, Prediction of cutting performance of diamond wire saw machine in quarrying of marble: A Neural Network Approach, Rock Mech. Rock Eng. 44 (3), 367 (2011). DOI: https://doi.org/10.1007/s00603-011-0137-6.
- S. G. Sandomirski, Analysis of requirements and the feasible limit for error reduction in two-parameter magnetic determination of steels' hardness, Prib. Metody. Izmer. 11 (3), 236 (2020). DOI: https://doi.org/10.21122/2220-9506-2020-11-3-236-244.
- F. Jia Rong Chen et al., Study on the wear of granite shape on electroplated diamond wire saw, Superhard Mater. Eng. 29 (05), 43 (2017).
- D. S. Vrac et al., The influence of honing process parameters on surface quality, productivity, cutting angle and coefficients of friction, Indus. Lubricat. Tribol. 64 (2), 77 (2012). DOI: https://doi.org/10.1108/00368791211208679.
- S. Hiroyuki et al., High-speed rotary cutting of difficult-to-cut materials on multitasking lathe, Int. J. Mach. Tools Manuf. 48 (7-8), 841 (2008).
- L. Zhao, Study and application of prolonging the service life of the refined trochlear wire rope, Mod. Manuf. Technol. Equip. (1), 96 (2018).
- W. Gao, J. T. Zhang, and J. Y. Duan, Duan: Study on the wear topography of diamond endless wire saw when cutting granite, KEM. 487, 361 (2011). DOI: https://doi.org/10.4028/www.scientific.net/KEM.487.361.
- N. I. Yongming, L. I. Zhen, and L. I. Guohe, Experimental study on surface topography and tensile ultimate load of diamond wire saw during life cycle in machining sapphire, Diamond Abras. Eng. 37 (4), 62 (2017).
- Y. Yamada et al., Frictional characterization of chemical–mechanical polishing pad surface and diamond conditioner wear, Jpn. J. Appl. Phys. 47 (8), 6282 (2008). DOI: https://doi.org/10.1143/JJAP.47.6282.
- S. Li, B. Wan, and R. G. Landers, Surface roughness optimization in processing SiC monocrystal wafers by wire saw machining with ultrasonic vibration, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 228 (5), 725 (2014). DOI: https://doi.org/10.1177/0954405413508116.
- S. W. Tian et al., Mathematical model of sapphire micromachining by CVD diamond coating tool, Integr. Ferroelectr. 200 (1), 134 (2019).
- Y. Yin et al., Analysis of crack-free surface generation of photovoltaic polysilicon wafer cut by diamond wire saw, Sol. Energy 216, 245 (2021). DOI: https://doi.org/10.1016/j.solener.2021.01.009.
- C. Chung, and V. N. Le, Depth of cut per abrasive in fixed diamond wire sawing, Int. J. Adv. Manuf. Technol. 80 (5-8), 1337 (2015). DOI: https://doi.org/10.1007/s00170-015-7089-z.
- T. Liedke, and M. Kuna, M. Kuna: A macroscopic mechanical model of the wire sawing process, Int. J. Mach. Tools Manuf. 51 (9), 711 (2011). DOI: https://doi.org/10.1016/j.ijmachtools.2011.05.005.
- A, S. A. D, A. A. B, and S. A. D. N. B., On the performance of a novel dressing tool with controlled geometry and density of abrasive grits, CIRP Ann. 66 (1), 337 (2017).
- A. Shojaei, G. Z. Voyiadjis, and P. J. Tan, Viscoplastic constitutive theory for brittle to ductile damage in polycrystalline materials under dynamic loading, Int. J. Plast. 48, 125 (2013). DOI: https://doi.org/10.1016/j.ijplas.2013.02.009.
- Y. Gao et al., Study on the subsurface microcrack damage depth in electroplated diamond wire saw slicing SiC crystal, Ceram. Int. 44 (18), 22927 (2018). DOI: https://doi.org/10.1016/j.ceramint.2018.09.088.
- L. Wang et al., Analytical prediction of subsurface microcrack damage depth in diamond wire sawing silicon crystal, Mater. Sci. Semicond. Process. 112, 105015 (2020). DOI: https://doi.org/10.1016/j.mssp.2020.105015.
- L. Zhao et al., Three-dimensional topography simulation research of diamond-wire sawing based on MATLAB, ILT. 72 (3), 325 (2019). DOI: https://doi.org/10.1108/ILT-07-2019-0247.
- Y. Qi, and S. Yan, A graphical user interface (GUI) with FDTD for electromagnetic scattering from a dielectric sphere, 2016 Progress in Electromagnetic Research Symposium (PIERS). IEEE, 2016.
- X. Shan, Design and Process Research of Ultrasonic Compound Machining System for Diamond Wire Saw (Yangzhou University, 2016).
- V. Soundararajan, and V. Radhakrishnan, An experimental investigation on the basic mechanisms involved in ultrasonic machining, Int. J. Mach. Tool Design Res. 26 (3), 307 (1986). DOI: https://doi.org/10.1016/0020-7357(86)90008-9.
- T. C. Lee, and C. W. Chan, Mechanism of the ultrasonic machining of ceramic composites, J. Mater. Process. Technol. 71 (2), 195 (1997). DOI: https://doi.org/10.1016/S0924-0136(97)00068-X.
- J. S. Zhang et al., The experiment research of diamond wire-saw in quarrying granite with high efficiency, MSF. 471-472, 117 (2004). DOI: https://doi.org/10.4028/www.scientific.net/MSF.471-472.117.
- L. Li et al., Influence of diamond wiresaw excited by transverse ultrasonic vibration on cutting force and critical cutting depth of hard and brittle materials, JME. 52 (3), 187 (2016). DOI: https://doi.org/10.3901/JME.2016.03.187.
- R. Mayén-Mondragón et al., Following the integration of diamond particles on the lapping-plate surface: towards a more efficient charging process, J. Tribol. 134 (4), 042301 (2012). DOI: https://doi.org/10.1115/1.4006994.
- Z. Lv et al., FEM analysis on the abrasive erosion process in ultrasonic-assisted abrasive waterjet machining, Int. J. Adv. Manuf. Technol. 78 (9-12), 1641 (2015). DOI: https://doi.org/10.1007/s00170-014-6768-5.
- Q. Luo et al., The synergistic effect of cavitation erosion and corrosion of nickel-aluminum copper surface layer on nickel-aluminum bronze alloy, J. Alloys Compd. 747, 861 (2018). DOI: https://doi.org/10.1016/j.jallcom.2018.03.103.
- A. Bierla et al., Mechanical and physico-chemical study of sulphur additives effect in milling of high strength steel, Wear 286-287 (286-287) (none), 116 (2012). DOI: https://doi.org/10.1016/j.wear.2011.05.007.
- L. Li, Mechanism and Experimental Study on Cutting SiC Single Crystal by Diamond Wire Saw under Transverse Ultrasonic Excitation (Xi'an University of Technology, 2016).
- W. Xiao Ye, Cutting Technology and Experimental Research of SiC Single Crystal Ultrasonic Wire Saw (Xi'an University of Technology, 2013).
- Z. Liao Yuan, Development of Ultrasonic Cutting Experimental Device for Electroplated Diamond Wire Saw and Research on Machining Mechanism (Changchun University of Technology, 2007).
- M. Lotfi, and J. Akbari, J. Akbari: Finite element simulation of ultrasonic-assisted machining: A review, Int. J. Adv. Manuf. Technol. 116 (9-10), 2777 (2021). DOI: https://doi.org/10.1007/s00170-021-07205-0.
- R. C. Yuan, X. Shan, and Y. F. Jin, Research on ultrasonic-assisted diamond wire saw cutting hard and brittle materials, Mech. Eng. Autom. 206 (1), 136 (2018).
- G. Venkatesh, D. Sood, and A. K. Sharma, On surface integrity of al 2014 alloy finished by ultrasonic assisted abrasive flow machining, IOP Conf. 346 (012057) (2018).
- M. K. Patel, C. Ghanshyam, and P. Kapur, Characterization of electrode material for electrostatic spray charging: theoretical and engineering practices, J. Electrostat. 71 (1), 55 (2015).
- J. Chao Hua, Study on Transport and Deposition Characteristics of Electrostatic Spray Droplets (Jiangsu University, 2007).
- Z. Zhong Li, Study on Adsorption Characteristics and Cutting Experiment of Electrostatic Spray Diamond Wire Saw Cutting Fluid (Zhejiang University of Technology, 2020).
- R. Wang, and S. Bai, Effect of droplet size on wetting behavior on laser textured SiC surface, Appl. Surf. Sci. 353, 564 (2015). DOI: https://doi.org/10.1016/j.apsusc.2015.06.158.
- C. Y. Yao, Z. L. Zheng, and D. D. Chen, Effect of voltage on cutting quality of electrostatic spray diamond wire saw, J. Huazhong Univ. Sci. Technol. (Nat. Sci.) 48 (04), 73 (2020).
- J. B. Zhang, Based on Different Cooling Methods α-Al2O3 Research on Cutting Mechanism and Process of Alumina Ceramic Wire Saw (Jiangsu University of Science and Technology, 2015).
- B. Wang et al., Air-cooling system optimization for IGBT modules in MMC using embedded o-shaped heat pipes, IEEE J. Emerg. Select. Top. Power Electron., 99 (2021).
- A. Zf, B. To: Influence of cutting fluid flow on tool wear in high-pressure coolant turning using a novel internally cooled insert, J. Manuf. Process. 56, 1114 (2020).
- T. Rajmohan et al., Synthesis and tribological characteristics of a nano CuO particle-filled water-based lubricants, IOP Conf. Ser.: Mater. Sci. Eng. 954 (1), 012045 (2020). DOI: https://doi.org/10.1088/1757-899X/954/1/012045.
- C. Chen, and A. Gupta, Modeling and analysis of wire motion during rocking mode diamond wire sawing of mono-crystalline alumina oxide wafer, Int. J. Adv. Manuf. Technol. 95 (9-12), 3453 (2018). DOI: https://doi.org/10.1007/s00170-017-1327-5.
- H. Huang, S. L. Zheng, and X. P. Xu, Theoretical research on contact length in the rocking motion wire saw, AMR. 1136, 343 (2016). DOI: https://doi.org/10.4028/www.scientific.net/AMR.1136.343.
- Z. Xu et al., Influence of ingot rocking on the surface quality of multi-wire sawing monocrystalline silicon wafers, Int. J. Adv. Manuf. Technol. 107 (5) (2020).
- Z. S. Lin, and H. Huang, Experimental study on cutting crystal glass with multi line reciprocating swing wire saw, China Mech. Eng. 32 (02), 132 (2021).
- G. Amitesh, and K. Jatinder, An investigation into the machining characteristics of nimonic 80A using cnc wire-edm, Int. J. Adv. Eng. Technol. 3 (1), 170 (2012).
- T. R. Lin, An analytical model of the material removal rate between elastic and elastic-plastic deformation for a polishing process, Int. J. Adv. Manuf. Technol. 32 (7-8), 675 (2007). DOI: https://doi.org/10.1007/s00170-005-0391-4.
- X. Zhou et al., Performance evaluation and prediction of the integrated circuit industry in China: a hybrid method, Socio-Econ. Plann. Sci. 69, 100712 (2020). DOI: https://doi.org/10.1016/j.seps.2019.05.003.