References
- N. Sarier, and E. Onder, The manufacture of microencapsulated phase change materials suitable for the design of thermally enhanced fabrics, Thermochim. Acta 452 (2), 149 (2007). DOI: https://doi.org/10.1016/j.tca.2006.08.002.
- W. Mhike et al., Thermally conductive phase-change materials for energy storage based on low-density polyethylene, soft Fischer–Tropsch wax and graphite, Thermochim. Acta 527 (1), 75 (2012). DOI: https://doi.org/10.1016/j.tca.2011.10.008.
- A. Sarı, C. Alkan, and A. Karaipekli, Preparation, characterization and thermal properties of PMMA/n -heptadecane microcapsules as novel solid–liquid microPCM for thermal energy storage, Appl. Energ. 87 (5), 1529 (2010). DOI: https://doi.org/10.1016/j.apenergy.2009.10.011.
- D. Buddhi et al., K: A simplification of the differential thermal analysis method to determine the latent heat of fusion of phase change materials, J. Phys. D: Appl. Phys. 20 (12), 1601 (1987). DOI: https://doi.org/10.1088/0022-3727/20/12/009.
- Y. Meng et al., Induced dipole force driven PEG/PPEGMA form-stable phase change energy storage materials with high latent heat, Chem. Eng. J. 390, 124618 (2020). DOI: https://doi.org/10.1016/j.cej.2020.124618.
- B. Wu et al., Thermally reliable, recyclable and malleable solid–solid phase-change materials through the classical Diels–Alder reaction for sustainable thermal energy storage, J. Mater. Chem. A 7 (38), 21802 (2019). DOI: https://doi.org/10.1039/C9TA08368E.
- W. G. Alshaer et al., Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipment, Energ. Convers. Manage. 89, 873 (2015). DOI: https://doi.org/10.1016/j.enconman.2014.10.045.
- M. C. Browne, B. Norton, and S. J. Mccormack, Phase change materials for photovoltaic thermal management, Renew. Sust. Energ. Rev. 47, 762 (2015). DOI: https://doi.org/10.1016/j.rser.2015.03.050.
- V. Soni, A. Kumar, and V. K. Jain, Performance evaluation of nano-enhanced phase change materials during discharge stage in waste heat recovery, Renew. Energ. 127, 587 (2018). DOI: https://doi.org/10.1016/j.renene.2018.05.009.
- L. F. Cabeza et al., Materials used as PCM in thermal energy storage in buildings: a review, Renew. Sust. Energ. Rev. 15 (3), 1675 (2011). DOI: https://doi.org/10.1016/j.rser.2010.11.018.
- A. Karaipekli, and A. Sarı, Development and thermal performance of pumice/organic PCM/gypsum composite plasters for thermal energy storage in buildings, Sol. Energ. Mat. Sol. C 149, 19 (2016). DOI: https://doi.org/10.1016/j.solmat.2015.12.034.
- Y. Zhang et al., Jin X, Umair Malik Muhammad, Lu R, Zhang S, Tang B: Ag-graphene/PEG composite phase change materials for enhancing solar-thermal energy conversion and storage capacity, Appl. Energ. 237, 83 (2019). DOI: https://doi.org/10.1016/j.apenergy.2018.12.075.
- M. Maleki et al., Development of graphitic domains in carbon foams for high efficient electro/photo-to-thermal energy conversion phase change composites, Chem. Eng. J. 362, 469 (2019). DOI: https://doi.org/10.1016/j.cej.2019.01.032.
- J. H. Jing et al., Melamine foam-supported form-stable phase change materials with simultaneous thermal energy storage and shape memory properties for thermal management of electronic devices, ACS Appl. Mater. Interfaces 11 (21), 19252 (2019). DOI: https://doi.org/10.1021/acsami.9b06198.
- H. Y. Wu et al., Melamine foam/reduced graphene oxide supported form-stable phase change materials with simultaneous shape memory property and light-to-thermal energy storage capability, Chem. Eng. J. 379, 122373 (2020). DOI: https://doi.org/10.1016/j.cej.2019.122373.
- L. H. Buxbaum, The degradation of poly (ethylene terephthalate), Angew. Chem. Int. Ed. Engl. 7 (3), 182 (1968). DOI: https://doi.org/10.1002/anie.196801821.
- A. Frenot, and I. S. Chronakis, Polymer nanofibers assembled by electrospinning, Curr. Opin. Colloid Interface 8 (1), 64 (2003). DOI: https://doi.org/10.1016/S1359-0294(03)00004-9.
- R. Quester et al., Biocompatibility and healing process of polyester meshes in the brain: In vivo examination in rats, Biomaterials 24 (5), 711 (2003). DOI: https://doi.org/10.1016/s0142-9612(02)00320-4.
- N. Bhardwaj, and S. C. Kundu, Electrospinning: A fascinating fiber fabrication technique, Biotechnol. Adv. 28 (3), 325 (2010). DOI: https://doi.org/10.1016/j.biotechadv.2010.01.004.