Ultrasonic evaluation of fatigue cracks at the wheel seat of a miniature wheelset

References

• Ishiduka , H. 1999 . Probability of improvement in routine inspection work of Shinkansen vehicle axles . Q. Rep. Railway Tech. Res. Inst. , 40 : 70 – 73 .
   Google Scholar
• Carboni , M. and Beretta , S. 2007 . Effect of probability of detection upon the definition of inspection intervals for railway axles . Proc. Inst. Mech. Eng. Part F: J. Rail Rapid Transit , 221 : 409 – 417 .
   Web of Science ®Google Scholar
• S. Cantini, M. Carboni, and S. Beretta, NDT reliability and inspection intervals assessment by defect tolerant approach, Proc. 16th Int. Wheelset Congr. (2010), Session 8.1
   Google Scholar
• Byrne , B.R. , Johnson , P.C. and Farley , P.G. 1966 . Ultrasonic inspection of railway axles . Ultrasonics , 4 : 143 – 151 .
   Web of Science ®Google Scholar
• Grum , J. , Jemec , V. and Beci , A. 2000 . Experimental system for ultrasonic testing of axle sets of diesel-engine trains . Insight , 42 : 782 – 788 .
   Web of Science ®Google Scholar
• Makino , K. , Yohso , J. , Sakamoto , H. and Ishiduka , H. 2005 . Hollow axle ultrasonic crack detection for conventional railway vehicles . Q. Rep. Railway Tech. Res. Inst. , 46 : 78 – 84 .
   Google Scholar
• K. Makino, J. Yohso, H. Sakamoto, and H. Ishiduka, An ultrasonic flaw detector for hollow axles of meter-gauge railway cars and results of axle fatigue test, Proc. 16th Int. Wheelset Congr. (2010), Session 7.4
   Google Scholar
• J. Yohso, Development of automatic ultrasonic testing equipment for general and bogie inspection of Shinkansen hollow axle, Proc. 11th Int. Wheelset Congr. 2 (1995), pp. 47–50
   Google Scholar
• Hofmann , E. and Oelschlagel , T. 2005 . Automatisierte ultraschall-prüfanlage für radsatzwellen mit längsbohrung . Eisenbahningenieur , 56-5 : 31 – 37 .
   Google Scholar
• M.B. Marshall, R. Lewis, R.S. Dwyer-Joyce, F. Demilly, and Y. Flament, Ultrasonic characterisation of wheel hub/axle interference fit pressures, Proc. 14th Int. Wheelset Congr. (2004), Paper 5.3
   Google Scholar
• Lewis , R. , Marshall , M.B. and Dwyer-Joyce , R.S. 2005 . Measurement of interface pressure in interference fits . Proc. Inst. Mech. Eng. Part C: J. Mech. Eng. Sci. , 219 : 127 – 139 .
   Web of Science ®Google Scholar
• Yoneyama , H. and Miharada , H. 2003 . Comparison of echo heights between fatigue crack and EDM notch . J. High Press. Inst. Jpn. , 41 : 115 – 122 . (in Japanese)
   Google Scholar
• Saka , M. and Akanda , M.A.S. 2004 . Ultrasonic measurement of the crack depth and the crack opening stress intensity factor under a no load condition . J. Nondestr. Eval. , 23 : 49 – 63 .
   Web of Science ®Google Scholar
• Akanda , M.A.S. and Saka , M. 2004 . Relationship between closure stress of small fatigue crack and ultrasonic response . J. Nondestr. Eval. , 23 : 37 – 47 .
   Web of Science ®Google Scholar
• Rokhlin , S.I. and Kim , J.-Y. 2003 . In situ ultrasonic measurement of crack closure . Int. J. Fatigue , 25 : 51 – 58 .
   Web of Science ®Google Scholar
• Ishiduka , H. and Yohso , J. 2001 . Difference between cracks and artificial flaws in ultrasonic testing: Ultrasonic testing performed on the smooth part of a φ 40 mm miniature axle specimen . J. Jpn. Soc. Nondestr. Inspect. , 50 : 719 – 723 . (in Japanese)
   Google Scholar
• Yohso , J. , Sakamoto , H. , Makino , K. and Ishiduka , H. 2002 . Inspection of rolling stock axles by using the grazing SH-wave ultrasonic method . Railway Tech. Res. Inst. Rep. , 16-5 : 35 – 40 . (in Japanese)
   Google Scholar
• Japanese Industrial Standards (JIS) E 4502-1: 2001, Axles for railway rolling stock: Quality requirements. First English Edition Japanese Standards Association, Tokyo, 2002
   Google Scholar
• Japanese Industrial Standards (JIS) E 5402-1: 2005, Railway rolling stock: Solid wheel: Part1: Quality requirements. Second English Edition Japanese Standards Association Tokyo, 2008
   Google Scholar
• Biwa , S. , Suzuki , A. and Ohno , N. 2005 . Evaluation of interface wave velocity, reflection coefficients and interfacial stiffnesses of contacting surfaces . Ultrasonics , 43 : 495 – 502 .
   PubMed Web of Science ®Google Scholar
• Biwa , S. , Hiraiwa , S. and Matsumoto , E. 2007 . Stiffness evaluation of contacting surfaces by bulk and interface waves . Ultrasonics , 47 : 123 – 129 .
   PubMed Web of Science ®Google Scholar
• Liaptsis , D. , Drinkwater , B.W. and Thomas , R. 2006 . The interaction of oblique incidence ultrasound with rough, partially contacting interfaces . Nondestr. Test. Eval. , 21 : 109 – 121 .
   Web of Science ®Google Scholar
• Thomas , R. , Drinkwater , B.W. and Liaptsis , D. 2005 . The reflection of ultrasound from partially contacting rough surfaces . J. Acoust. Soc. Am. , 117 : 638 – 645 .
   PubMed Web of Science ®Google Scholar
• Drinkwater , B.W. , Dwyer-Joyce , R.S. and Cawley , P. 1996 . A study of the interaction between ultrasound and a partially contacting solid–solid interface . Proc. R. Soc. Lond. A , 452 : 2613 – 2628 .
   Web of Science ®Google Scholar
• Freedman , A. 1960 . Sound field of a rectangular piston . J. Acoust. Soc. Am. , 32 : 197 – 209 .
   Web of Science ®Google Scholar
• Birchak , J.R. and Serabian , S. 1978 . Calibration of ultrasonic systems for inspection from curved surfaces . Mater. Eval. , 36 : 39 – 44 .
   Web of Science ®Google Scholar
• Endo , K. 1981 . “ Practical observations of initiation and propagation of fretting fatigue cracks ” . In Fretting Fatigue , Edited by: Waterhouse , R.B. 127 – 141 . London : Applied Science Publishers Ltd .
   Google Scholar
• Faanes , S. 1995 . Inclined cracks in fretting fatigue . Eng. Fract. Mech. , 52 : 71 – 82 .
   Web of Science ®Google Scholar